BA LAOLI BA TECH EU-260v1 Universal Controller Bakeng sa Thermostatic Actuators

Tlhahisoleseding ya Sehlahiswa

Litlhaloso

• Mohlala: EU-281C
• Ho kenya: E kentsoeng ka Flush
• Puisano: RS Puisano
• Ea kamehla Puisano Channel:37

Litaelo tsa Tšebeliso ea Sehlahisoa

1. Polokeho 
   Netefatsa hore phepelo ea motlakase e khaotsoe pele u kenya kapa ho e lokisa ho thibela ho tsukutloa ha motlakase. Hloekisa selaoli haeba se le lerole kapa se le litšila.
2. Tlhaloso ea Sesebelisoa
   Selaoli sa EU-281C se etselitsoe hore se kene ka har'a metsi 'me se lokela ho kenngoa ke motho ea nang le tsebo ho qoba likotsi tsa ho tsosoa ke motlakase.
3. Ho kenya
   Pele o sebetsa ho selaoli, tima motlakase 'me u nke mehato ea ho thibela ho tima ka phoso. Netefatsa ho hlongoa ka nepo le bohloeki ba molaoli.
4. Setšoantšo sa EU-260V1
   Bakeng sa ts'ebetso e nepahetseng, kenya module ea EU-260V1 bonyane 50 cm hole le bokaholimo ba tšepe, liphaephe kapa boiler ea CH. Latela litaelo tsa ho fetola mocha oa puisano ha ho hlokahala.
5. Mokhoa oa ho Fetola Mocha oa Lipuisano
   1. Tobetsa o hatelle konopo ya ho fetola kanale ho fihlela lebone la taolo le hadima hang.
   2. Emela palo e lakatsehang ea likhase tse bontšang nomoro ea pele ea nomoro ea mocha.
   3. E lokolla konopo ebe o e tobetsa hape ha lebone la taolo le bonesa habeli bakeng sa nomoro ea bobeli.
   4. Tsoela pele ho tšoara ho fihlela palo e lakatsehang ea likhase e fihletsoe, ho netefatsa phetoho e atlehileng ea kanale.
6. Mokhoa oa ho Sebelisa Controller
   Molaoli o buisana le molaoli ea ka sehloohong ho bontša boemo ba mocheso. E lumella basebelisi ho fetola litlhophiso joalo ka mocheso oa boiler oa CH le mekhoa ea ts'ebetso ea pompo.

POLOKO

Pele o sebelisa sesebelisoa ka lekhetlo la pele mosebelisi o lokela ho bala melao e latelang ka hloko. Ho se mamele melao e kenyellelitsoeng bukaneng ena ho ka lebisa likotsing tsa motho kapa tšenyo ea molaoli. Bukana ea mosebelisi e lokela ho bolokoa sebakeng se sireletsehileng bakeng sa ho sebelisoa hape. E le ho qoba likotsi le liphoso ho lokela ho netefatsoa hore motho e mong le e mong ea sebelisang sesebelisoa o itloaetse molao-motheo oa ts'ebetso hammoho le mesebetsi ea ts'ireletso ea molaoli. Haeba sesebelisoa se lokela ho rekisoa kapa ho beoa sebakeng se seng, etsa bonnete ba hore bukana ea mosebelisi e teng le sesebelisoa e le hore mosebelisi ofe kapa ofe ea ka bang teng a ka fumana lintlha tsa bohlokoa mabapi le sesebelisoa.

Moetsi ha a amohele boikarabello bakeng sa likotsi leha e le life kapa tšenyo e bakoang ke ho se tsotelle; ka hona, basebelisi ba tlamehile ho nka mehato e hlokahalang ea polokeho e thathamisitsoeng bukaneng ena ho sireletsa bophelo ba bona le thepa ea bona.

TLHOKOMELO 

• Vol e phahamengtage! Etsa bonnete ba hore molaoli o khaotsoe ho mains pele a etsa mesebetsi efe kapa efe e amanang le phepelo ea motlakase (ho kenya likhoele, ho kenya sesebelisoa joalo-joalo)
• Sesebelisoa se lokela ho kenngoa ke setsebi sa motlakase se tšoanelehang.
• Molaoli ha oa lokela ho sebetsoa ke bana.
• Sesebelisoa se ka senyeha haeba se otloa ke lehalima. Etsa bonnete ba hore polaka e khaotsoe phepelong ea motlakase nakong ea sefefo.
• Tšebeliso efe kapa efe ntle le e boletsoeng ke moetsi e thibetsoe.
• Pele le nakong ea nako ea ho futhumatsa, molaoli o lokela ho hlahlojoa hore na boemo ba likhoele tsa oona ke bofe. Mosebelisi o boetse o lokela ho hlahloba hore na molaoli o kentsoe hantle le ho e hloekisa haeba e le lerole kapa e litšila.

Liphetoho tsa thepa e hlalositsoeng bukeng ena e kanna ea hlahisoa kamora hore e phetheloe ka la 13.06.2022. Moetsi o na le tokelo ea ho hlahisa liphetoho mohahong. Lipapiso li ka kenyelletsa lisebelisoa tse eketsehileng. Theknoloji ea ho hatisa e ka etsa hore ho be le phapang ea mebala e bontšitsoeng.

Tlhokomelo ea tikoloho ea tlhaho ke eona ntho e tlang pele bophelong ba rona. Ho tseba taba ea hore re etsa lisebelisoa tsa elektroniki ho re tlama ho lahla lintho tse sebelisitsoeng le lisebelisoa tsa elektroniki ka tsela e bolokehileng bakeng sa tlhaho. Ka lebaka leo, k'hamphani e fumane nomoro ea ngoliso e fanoeng ke Mohlahlobi ea ka Sehloohong oa Tšireletso ea Tikoloho. Letšoao la moqomo oa lithōle o pharalletseng holim'a sehlahisoa le bolela hore sehlahisoa ha sea lokela ho lahleloa ka ntle meqomong e tloaelehileng ea litšila. Ka ho arola litšila tse reretsoeng ho sebelisoa hape, re thusa ho sireletsa tikoloho ea tlhaho. Ke boikarabello ba mosebedisi ho fetisetsa litšila tsa motlakase le tsa elektroniki sebakeng se khethiloeng sa ho bokella litšila tse hlahisoang ke lisebelisoa tsa elektroniki le tsa motlakase.

TLHALOSO SEBAKA

Taolo ea kamore ea EU-281C e nolofalletsa taolo e bonolo ea mocheso oa kamore, mocheso oa boiler oa CH, mocheso oa tanka ea metsi hammoho le mocheso oa li-valve tse kopanyang ntle le tlhoko ea ho ea kamoreng ea boiler. Molaoli a ka sebelisana le mefuta e fapaneng ea balaoli ba ka sehloohong ba sebelisang puisano ea RS: balaoli ba tloaelehileng, li-pellet controller (tse nang le sehloma) le li-controller tsa ho kenya.
Pontšo e kholo ea litšoantšo e hlakileng e nang le "backlight touch screen" e etsa hore ho be bonolo ho bala le ho fetola li-parameter tsa molaoli.

EU-281C e fana ka taolo ea kamore:

• Taolo ea mocheso oa kamore
• CH taolo ea mocheso oa boiler
• Taolo ea mocheso oa DHW
• Taolo ea mocheso oa li-valve tse kopanyang (tšebelisano le module ea valve ea hlokahala)
• Monyetla oa ho shebella mocheso o ka ntle
• Kemiso ea ho futhumatsa ea beke le beke
• Oache ea alamo
• Senotlolo sa batsoali
• E bonts'a mocheso oa kamore ea hona joale le mocheso oa boiler oa CH

Lisebelisoa tsa taolo: 

• Sekirini se seholo, se balehang habonolo, sa mebala
• Sensor ea kamore e hahiloeng

KEKETSO

EU-281C e reretsoe hore e be le flush-mounted. Molaoli o lokela ho kenngoa ke motho ea tšoanelehang.

TLHOKOMELO
Kotsi ea ho ts'oaroa ke motlakase o bolaeang ka lebaka la ho ama likhokahano tse phelang. Pele o sebetsa ho molaoli, tima phepelo ea motlakase 'me u thibele hore e se ke ea buloa ka phoso.

MODULE EU-260V1

Mojule oa V1 - o reretsoeng . E lokela ho hokahanngoa le sesebelisoa se nang le matla a sona.

HLOKOMELA
E le ho fihlela kutloisiso e kholo ea moea, EU-260 v1 e lokela ho kenngoa bonyane 50 cm ho tloha holim'a tšepe leha e le efe, liphaephe kapa boiler ea CH.

HLOKOMELA
Kanale ea kamehla ea puisano ke "37". Ha ho hlokahale ho fetola mocha oa puisano haeba ts'ebetso ea sesebelisoa e sa sitisoe ke leqhubu la radio.

Haeba ho ka ba le tšitiso efe kapa efe ea seea-le-moea, ho ka hlokahala hore ho fetole mocha oa puisano. Ho fetola mocha, latela mehato ena: 

1. Tobetsa o hatelle konopo ea ho fetola kanale. Ha lebone la taolo ho sensor le bonesa hang, o se o qalile ho beha nomoro ea pele.
2. Tšoara konopo 'me u eme ho fihlela leseli la taolo le bonesa (le tsoela pele le ho tima) palo ea linako tse bontšang nomoro ea pele ea nomoro ea mocha.
3. Lokolla konopo. Ha lebone la taolo le tima, tobetsa konopo ea ho fetola mocha hape. Ha leseli la taolo ho sensor le bonesa habeli (liphase tse peli tse potlakileng), o se o qalile ho beha nomoro ea bobeli.
4. Tšoara konopo 'me u eme ho fihlela lebone la taolo le khantša linako tse lakatsehang. Ha konopo e lokolloa, lebone la taolo le tla khanya habeli (liphase tse peli tse potlakileng). Ho bolela hore phetoho ea kanale e phethiloe ka katleho.

Liphoso ts'ebetsong ea phetoho ea kanale li bonts'oa ha lebone la taolo le ntse le tsoela pele ka metsotsoana e ka bang 2. Boemong bo joalo, mocha ha o fetoloe.

HLOKOMELA
Tabeng ea ho beha nomoro ea kanale ea nomoro e le 'ngoe (likanale 0-9), nomoro ea pele e lokela ho ba 0.

MOKHOA OA HO SEBELISA MOLAOLI

1. MOLAO OA MOSEBETSI
   Molaoli o romela letšoao ho molaoli ea ka sehloohong a tsebisang hore na mocheso o behiloeng esale pele o fihlile. Ho ipapisitse le litlhophiso tse itseng, ho fihlela mocheso o behiloeng esale pele ho ka fella ka mohlala, ho tima pompo ea CH, ho fokotseha ho boletsoeng esale pele ho mocheso oa boiler oa CH (litlhophiso tsa molaoli ea ka sehloohong). Taolo ea kamore e boetse e thusa mosebelisi ho fetola litlhophiso tse itseng tsa molaoli ea ka sehloohong, mohlala, mocheso oa boiler oa CH o behiloeng esale pele, mekhoa ea ts'ebetso ea pompo joalo-joalo.
2. TLHALOSO SEHLOHONOLO
   Mookameli o na le skrine e kholo ea ho ama. E bonts'a boemo ba hajoale ba li-parameter tsa CH boilers tsa mantlha. Ho ipapisitse le likhetho tsa mosebelisi, ponts'o e ka bonts'a skrine ea sistimi ea ho futhumatsa (ea ho kenya) kapa skrineng sa phanele. Liparamente tse hlahang skrineng se seholo view ea taolo ea kamore e itšetlehile ka litlhophiso tsa molaoli ea ka sehloohong le mofuta oa eona.

HLOKOMELA

• Phetoho e 'ngoe le e' ngoe ea mocheso o behiloeng esale pele, nako kapa paramethara efe kapa efe ka har'a taolo ea phaposi kapa mochini oa boiler oa CH o fella ka hore ho hlahisoe maemo a macha lisebelisoa ka bobeli.
• Ho kenya view ke skrine ea mantlha ea kamehla view. Mosebelisi a ka e fetola hore e be phanele view.

TLHALOSO EA MAIN SCREEN – SCREEN EA INSTALLATION

1. Thempereichara ea khase ea flue (e bonts'itsoeng feela haeba ho sebelisoa sensor ea khase ea flue ho molaoli ea ka sehloohong).
2. Nako ea hajoale le letsatsi la beke - tlanya mona ho hlophisa litlhophiso tsa nako.
3. Letšoao le bontšang hore ts'ebetso ea oache ea alamo ea sebetsa.
4. Letšoao le bontšang hore mosebetsi oa ho laola beke le beke o sebetsa.
5. Kenya lenane la taolo.
6. Mocheso oa valve oa 1: boleng ba hajoale le bo behiloeng esale pele - tlanya mona ho hlophisa mocheso o behiloeng esale pele oa valve 1.
7. Mocheso oa valve oa 2: boleng ba hajoale le bo behiloeng esale pele - tlanya mona ho hlophisa mocheso o behiloeng esale pele oa valve 2.
   HLOKOMELA: E le hore molaoli oa kamore a bontše li-valve parameters, ho hlokahala hore u li sebelise le ho li ngolisa (haeba li-modules tsa ka ntle tsa valve tse kang ST-431N li sebelisoa). Haeba valve e sa sebetse, skrine ea taolo ea kamore e bontša "!".
8. Mocheso oa mocheso oa tanka ea 1: boleng ba hona joale le bo seng bo setiloe - tlanya mona ho hlophisa mocheso oa tanka ea metsi o seng o setiloe.
9. Letšoao la pompo e potolohang – aekhone ya animated e bontsha hore pompo e sebetsa.
10. Letšoao la pompo la DHW – aekhone ya animated e bontsha hore pompo e sebetsa.
11. Letšoao la pompo la CH - aekhone ya animated e bontsha hore pompo e sebetsa.
12. CH mocheso oa boiler – boleng ba jwale le bo seng bo setilwe. Haeba litekanyetso tse tharo li bonts'oa, ho bolela hore taolo ea beke le beke e sebetsa 'me boleng ba boraro bo bua ka khalemelo ea mocheso e behiloeng esale pele. Tobetsa mona ho hlophisa mocheso o behiloeng esale pele oa CH boiler.
13. Boemo ba mafura ka har'a sesebelisoa.
14. Mocheso oa ka ntle (o bontšoa feela haeba ho sebelisoa sensor e ka ntle ho molaoli ea ka sehloohong).
15. Mocheso oa kamore – boleng ba hajoale le bo seng bo setilwe. Haeba litekanyetso tse tharo li bontšoa, ho bolela hore taolo ea beke le beke e sebetsa 'me boleng ba boraro bo bua ka khalemelo ea mocheso e behiloeng esale pele. Tobetsa mona ho hlophisa mocheso oa kamore o seng o setiloe.

TLHALOSO EA MOHOLO OA SIRELETSO – PANEL SCREEN

1. Mokhoa oa hajoale oa ts'ebetso ea lipompo.
2. Letšoao le bontšang hore mosebetsi oa ho laola beke le beke o sebetsa.
3. Letšoao le bontšang hore ts'ebetso ea oache ea alamo ea sebetsa.
4. Mocheso oa ka ntle (o bontšoa feela ha ho sebelisoa sensor e ka ntle ho molaoli ea ka sehloohong).
5. Mocheso oa hona joale oa kamore.
6. Nako ea hona joale le letsatsi la beke.
7. Ka ho le letona paramethara.
8. Likonopo tse sebelisoang ho fetola skrineng view.
9. Kenya lenane la taolo.
10. Karolo e ka ho le letšehali ea paramethara.

Ho sebelisa likonopo tsa ho fetola liphanele tseo mosebelisi a ka li etsang view lintlha tse eketsehileng mabapi le tsamaiso ea mocheso: 

• Phanele ea mocheso oa kamore - Mocheso oa kamore oa hona joale le o setetsoeng pele - tlanya holim'a phanele ena ho fetola mocheso oa kamore o behiloeng esale pele.
• CH mocheso oa mocheso oa boiler - Mocheso oa mocheso oa CH oa hajoale le o se o behiloe esale pele - tlanya phanele ena ho fetola mocheso oa boiler oa CH o behiloeng esale pele.
• Sefate sa mocheso oa tanka ea metsil - Mocheso oa tanka ea metsi o teng hona joale le o seng o behiloe - tlanya phanele ena ho fetola mocheso oa tanka ea metsi o behiloeng esale pele.
• Phanele ea valve - Mocheso oa hona joale le o behiloeng esale pele oa li-valve 1,2,3 kapa 4 - tlanya holim'a phanele ena ho fetola mocheso o behiloeng esale pele.
• Phanele ea boemo ba mafura - Boemo ba mafura ka har'a boiler ea CH (khetho e fumaneha feela haeba molaoli oa boiler oa CH a romella tlhahisoleseling e joalo ho molaoli oa kamore).
• Phanele ea chate - Chate ea mocheso oa hajoale: Boiler ea CH, tanka ea metsi kapa mocheso oa kamore - pontšo e hlakileng ea liphetoho tsa mocheso ha nako e ntse e ea.
• Pellet boiler mode mode mode– E fana ka mollo-up le dampmesebetsi e meng (the view e fumaneha feela bakeng sa li-boilers tsa pellet). Tlanya phanele ena ho kenya kapa ho tima boiler ea CH.
• Phanele ea mokhoa oa ts'ebetso ea pompo - Mokhoa oa ho sebetsa view - e bonts'a mokhoa oa hajoale oa ts'ebetso oa lipompo (the view e fumaneha feela bakeng sa li-boilers tsa pellet).Tlanya phanele ena ho fetola mokhoa oa ts'ebetso. Mekhoa e latelang e fumaneha: Ho futhumatsa ntlo, Tanka ea metsi e tlang pele, Lipompo tse tšoanang, Mokhoa oa Lehlabula o futhumatsang, Mokhoa oa Lehlabula ntle le ho futhumatsa hape. Tlhaloso e qaqileng ea mokhoa o mong le o mong e ka fumanoa bukeng ea CH boiler controller manual.

MESEBETSI EA MOLAOLI - MENU KHETHO

Nakong ea ts'ebetso e tloaelehileng ea molaoli, ponts'o ea litšoantšo e bonts'a leqephe le ka sehloohong. Ka ho tlanya ho MENU mosebelisi o kenya litlhophiso tse itseng tsa molaoli.

THIBELA TŠEBELETSO EA MAIN MENU

NAKO
Ho tlanya konopo ea Nako ho bula phanele e lumellang mosebelisi ho fetola li-setting tsa oache, letsatsi la hajoale la beke le litlhophiso tsa oache ea alamo.

• Tshupanako - Mosebetsi ona o sebelisetsoa ho beha nako ea hona joale ho latela hore na molaoli o sebetsa joang.
• Letsatsi la beke - Mosebetsi ona o sebelisetsoa ho beha letsatsi la hona joale la beke ho latela hore na molaoli o sebetsa joang.
• Oache ea alamo - Ts'ebetso ena e sebelisetsoa ho seta oache ea alamo. Oache ea alamo e ka hlophisoa hore e kenngoe matsatsing a khethiloeng a beke (e sebetsa ka matsatsi a khethiloeng) kapa hang feela.
• Beha nako ea alamo u sebelisa metsu ea 'holimo' le 'down'.
  • Haeba oache ea alamo e tla kengoa tšebetsong ka matsatsi a khethiloeng feela, mosebelisi o lokela ho khetha matsatsi a ho kenya oache ea alamo.
  • Skrine view ha alamo e le mothating wa ho kenngwa tshebetsong.

TS'IRELETSO
Tlanya ho aekhone ea Tšireletso ho menu e kholo ho lokisa litlhophiso tsa senotlolo sa batsoali.

• Ho notlela ka ho iketsa - Kamora ho tobetsa konopo ea Auto-Lock, ponts'o e bonts'a karolo e nolofalletsang mosebelisi ho kenya le ho koala senotlolo.
• PIN khoutu - Bakeng sa ho seta PIN khoutu, e hlokahalang hore mosebelisi a sebelise molaoli ha senotlolo se butsoe, tlanya PIN aekhone.

HLOKOMELA
0000 ke PIN khoutu ea kamehla.

TS'ELISO
Tlanya ho Screen aekhone ho menu e kholo ho hlophisa litlhophiso tsa skrini.

• Screen saver - Mosebelisi a ka kenya tšebetsong skrini se tla hlaha kamora nako e boletsoeng esale pele ea ho se sebetse. E le hore u khutlele skrineng se seholo view, tlanya skrineng. Litlhophiso tse latelang tsa skrini se ka hlophisoa ke mosebelisi:
  • Khetho ea skrini - Kamora ho tobetsa letšoao lena, mosebelisi a ka tima skrineng (Ha ho na skrini) kapa a beha skrini ka mokhoa oa:
    • Tshupanako – – skrine se hlahisa tshupanako.
    • Ha ho letho - kamora nako e boletsoeng esale pele ea ho se sebetse skrineng ha se na letho.
    • Ho apara bosiu feela - skrine e tla tima bosiu.
  • Nako ea ho se sebetse - Ts'ebetso ena e sebelisoa ho hlalosa nako eo skrineng e kentsoeng ka eona.
• Skrine view – Tap on Screen view aekhone ho lokisa skrineng se seholo view, Tlhophiso view e setilwe e le ya kamehla empa mosebedisi a ka boela a kgetha sekirine sa phanele.
• Bosiu ho tloha/ Motsheare ho tloha - Ntle le lethathamong la skrineng, mosebelisi a ka hlalosa nako e nepahetseng ea ho kena ka mokhoa oa bosiu (Bosiu ho tloha) le ho khutlela mokhoeng oa mots'eare (Letsatsi ho tloha).
• Khanya ea skrine ea motšehare/ Khanya ea skrine ea bosiu - Kamora ho tobetsa letšoao la khanya ea skrineng, mosebelisi a ka fetola khanya ea skrineng (ka liperesente tse ngatatages) ka bobeli bakeng sa mots'eare le bosiu.

TAOLI BEKE

Boemo ba beke le beke ba mocheso o behiloeng esale pele bo fokotsa litšenyehelo tsa ho futhumatsa mme bo fana ka matšeliso a batang a mocheso lihora tse 24 ka letsatsi. Parameter e khethollang ts'ebetso e nepahetseng ea ts'ebetso ena ke nako ea hona joale le letsatsi la beke. Kamora ho khetha ts'ebetso ea taolo ea beke le beke, mosebelisi a ka bulela / tima kemiso ea ts'ebetso mme a hlophisa liparamente tse nepahetseng. Pele o beha hourly kheloha, khetha letsatsi la beke leo litlhophiso li tla sebetsa ho lona.

Ka mor'a ho khetha letsatsi la beke, ho tla hlahisoa phanele ea ho beha likhaello tsa mocheso ka linako tse khethiloeng.

1. Fokotsa mocheso
2. Kopitsa phapang ea mocheso ho lihora tse tlang
3. Eketsa mocheso
4. Fetola nako ka morao
5. Fetola nako ho ea pele
6. Nako ea nako (lihora tse 24)

Letšoao la Copy le thusa mosebelisi ho kopitsa litlhophiso tsa letsatsi lohle ka letsatsi le leng.

CH E TS'OAOLA
Litekanyetso tse ka har'a submenu ena li ka fapana ho latela mofuta oa molaoli ea ka sehloohong.

1. MOLAOLI MAEMO SUBMENU
   • Mocheso o behiloeng esale pele - Tobetsa setšoantšong sena ho fetola mocheso oa boiler oa CH (o ka boela oa etsoa ka ho tlanya phanele ea paramente skrineng se seholo. view).
   • Mekhoa ea ts'ebetso - Tobetsa setšoantšong sena ho khetha e 'ngoe ea mekhoa e latelang ea ts'ebetso ea pompo (ho selaoli sa boiler sa CH): Ho futhumatsa ntlo, pele tanka ea metsi, lipompo tse tšoanang kapa mokhoa oa Lehlabula. Tlhaloso e qaqileng ea mekhoa e itseng ea ts'ebetso e ka fumanoa bukeng ea CH boiler controller manual.
2. MOLAOLI PELLET SUBMENU
   • Mocheso o behiloeng esale pele - Tobetsa setšoantšong sena ho fetola mocheso oa boiler oa CH (o ka boela oa etsoa ka ho tlanya phanele ea paramente skrineng se seholo. view).
   • Ho chesa mollo - Tlanya aekhoneng ena ho qala ts'ebetso ea ho chesa mollo oa CH.
   • Dampng - Tlanya aekhoneng ena ho qala CH boiler damping process.
   • Mekhoa ea ts'ebetso - Tobetsa setšoantšong sena ho khetha e 'ngoe ea mekhoa e latelang ea ts'ebetso ea pompo (ho selaoli sa boiler sa CH): Ho futhumatsa ntlo, pele tanka ea metsi, lipompo tse tšoanang kapa mokhoa oa Lehlabula. Tlhaloso e qaqileng ea mekhoa e itseng ea ts'ebetso e ka fumanoa bukeng ea CH boiler controller manual.
3. KENYA MOLAOLI SUBMENU
   • Mekhoa ea ts'ebetso - Tobetsa setšoantšong sena ho khetha e 'ngoe ea mekhoa e latelang ea ts'ebetso ea pompo (ho selaoli sa boiler sa CH): Ho futhumatsa ntlo, Tanka ea metsi e tlang pele, lipompo tsa Parallel kapa mokhoa oa Lehlabula. Tlhaloso e qaqileng ea mekhoa e itseng ea ts'ebetso e ka fumanoa bukeng ea CH boiler controller manual.

PUO PUO
Tobetsa aekhoneng ena ho khetha mofuta oa puo oa lenane.

SOFTWARE TŠEBELE
Kamora ho khetha letšoao lena, ponts'o e bonts'a letšoao la moetsi oa boiler oa CH hammoho le tlhaiso-leseling mabapi le mofuta oa software.

LIEKETSENG
Tobetsa aekhoneng ena ho lokisa liparamente tse ling.

• Sensor ea mocheso - Tobetsa setšoantšong sena ho hlophisa hysteresis le calibration ea sensor ea mocheso oa kamore.
  • Hysteresis - Ts'ebetso ena e sebelisetsoa ho hlalosa mamello ea mocheso o behiloeng esale pele e le ho thibela oscillation e sa batleheng tabeng ea ho fetoha ha mocheso o monyenyane (ka har'a sebaka sa 0 ÷ 10⁰C) ka ho nepahala ha 0,1 ° C.
    Bakeng sa mohlalaampLe: haeba mocheso o behiloeng esale pele ke 23⁰C le hysteresis ke 1⁰C, mocheso oa kamore o nkoa o le tlase haholo ha o theohela ho 22⁰C.
  • Tekanyetso - Calibration e lokela ho etsoa ha e ntse e phahama kapa ka mor'a hore molaoli a sebelisoe nako e telele, haeba mocheso oa kamore o lekantsoeng ke sensor o fapane le mocheso oa sebele. Lenane la litlhophiso tsa calibration le tloha ho -10OC ho ea ho +10OC ka ho nepahala ha 0,1OC.
• Mofuta oa molaoli ea ka sehloohong - Tobetsa setšoantšong sena ho khetha mofuta oa molaoli ea ka sehloohong ho sebelisana le molaoli oa kamore: molaoli ea tloaelehileng, molaoli oa pellet kapa molaoli oa ho kenya. CH "menu ea taolo ea boiler" e tla fetoha ka tsela e nepahetseng.
• Oache e hahiloeng ka hare - letsatsi le nako li tla kopitsoa ka bo eona ho tsoa phanele, ebe e tla hlahisoa skrineng se seholo le haeba puisano le molaoli ea ka sehloohong e sitisoa.
• Ntlafatso ea software - ts'ebetso ena e thusa mosebelisi ho nchafatsa software ea taolo a sebelisa USB flash drive.
• Puisano e se nang mohala – tshebetso e thusa mosebedisi ho kenya tshebetsong puisano ya waelese le ho khetha mocha oa puisano. '37' ke mocha oa kamehla. Haeba ho se mats'oao a radio a sitisang ts'ebetso ea sesebelisoa, ha ho hlokahale ho fetola kanale.

LITLHAHELO

EU-281C molaoli oa mocheso oa kamore o bontša lialamo tsohle tse hlahang ho molaoli ea ka sehloohong. Ha ho na le alamo, molaoli oa kamore o romela letšoao la molumo 'me pontšo e bontša molaetsa o tšoanang le oa molaoli ea ka sehloohong. Haeba sensor e ka hare e senyehile, alamo e latelang e hlaha: 'Sensor ea mocheso oa kamore e senyehile'.

LIEKETSENG MOTS'OANE

Phepelo ea motlakase	230V
Tšebeliso ea matla	1W
Mocheso oa ts'ebetso	5÷50°C
Phoso ea tekanyo	± 0,5°C
Khafetsa ea ts'ebetso	868MHz

Lintlha tsa tekheniki tsa module EU-260v1

Phepelo ea motlakase	12V DC
Mocheso oa tikoloho	5÷50°C
Khafetsa	868MHz

Phatlalatso ea EU ea Tumellano
Ka hona, re phatlalatsa tlasa boikarabello ba rona hore EU-281c e entsoe ke TECH STEROWNIKI II Sp. z oo, ntlo-kholo ea Wieprz Biała Droga 31, 34-122 Wieprz, e lumellana le Directive 2014/35/EU ea Paramente ea Europe le Lekhotla la 26 Hlakola 2014 mabapi le tumellano ea melao ea Linaha tseo e leng Litho tse amanang le ho fumaneha 'marakeng oa lisebelisoa tsa motlakase tse etselitsoeng ho sebelisoa ka har'a voltage meeli (EU OJ L 96, ea 29.03.2014, leq. 357), Directive 2014/30/EU ea Paramente ea Europe le Lekhotla la 26 Hlakola 2014 mabapi le ho lumellana ha melao ea Litho tsa Litho tse amanang le ho lumellana ha motlakase ( EU OJ L 96 of 29.03.2014, p.79), Taelo 2009/125/EC ho theha moralo oa ho beha litlhoko tsa ecodesign bakeng sa lihlahisoa tse amanang le matla hammoho le taolo ea MINISTRY OF ENTREPRENEURSHIP AND TECHNOLOGY ea la 24 Phuptjane 2019 e lokisang molao o mabapi le litlhoko tsa bohlokoa mabapi le thibelo ea tšebeliso ea lintho tse ling tse kotsi ho lisebelisoa tsa motlakase le tsa elektroniki, lipehelo tsa ts'ebetsong tsa Directive (EU) 2017/2102 ea Paramente ea Europe le Lekhotla la 15 November 2017 le fetolang Directive 2011/65/EU mabapi le thibelo ea tšebeliso ea lintho tse ling tse kotsi ho lisebelisoa tsa motlakase le tsa elektroniki (OJ L 305, 21.11.2017, leq. 8) .

Bakeng sa tlhahlobo ea tumellano, ho ile ha sebelisoa litekanyetso tse lumellanang: PN-EN IEC 60730-2-9: 2019-06, PN-EN 60730-1: 2016-10, PN EN IEC 63000: 2019-01 RoHS.

• Ntlo-kholo e bohareng:
  • ul. Biata Droga 31, 34-122 Wieprz
• Tšebeletso:
  • ul. Skotnica 120, 32-652 Bulowice
  • mohala: +48 33 875 93 80
  • lengolo-tsoibila: serwis@techsterrowniki.pl
  • www.tech-controllers.com

LBH

P: Nka tsosolosa molaoli joang?
A: Ho tsosolosa molaoli, fumana konopo ea reset (haeba e fumaneha) 'me ue tobetse metsotsoana e seng mekae ho fihlela sesebelisoa se qala hape.

P: A na nka sebelisa molaoli le mefuta e meng?
A: Ho lumellana ha molaoli oa EU-281C le mefuta e meng ho ka fapana. Sheba bukana ea mosebedisi kapa ikopanye le tshehetso ya bareki bakeng sa tlhahisoleseding e itseng.

Litokomane / Lisebelisoa

BA LAOLI BA TECH EU-260v1 Universal Controller Bakeng sa Thermostatic Actuators [pdf] Bukana ea Mosebelisi EU-260v1 Universal Controller Bakeng sa Thermostatic Actuators, EU-260v1, Universal Controller Bakeng sa Thermostatic Actuators, Controller For Thermostatic Actuators, Thermostatic Actuators, Actuators

Litšupiso

• Bukana ea Mosebelisi