SWISSon XMT-500 DMX Tester le RDM Ethernet Controller
Tlhahisoleseding ya Sehlahiswa
Litlhaloso
- Hlakola ponts'o e nang le mebala e felletseng
- Keypad e matla ea membrane
- Betri e ka nchafatsoang
- Chassis e thata
- Lihokelo tsa indasteri
Likarolo tsa XMT-500
XMT-500 ke sesebelisoa se feto-fetohang se nang le likarolo tse latelang:
- USB-C
- Ethercon RJ45
- Konopo ea PUSH
- Pontšo ea mebala e khanyang
- Tobetsa o hatelle ho bulela le ho tima
- Keypad bakeng sa ho tsamaea
- DMX in le DMX tsoa lihokelo
- Konopo ea li-setting bakeng sa tlhophiso
- Linotlolo tsa cursor bakeng sa motsamao
- Ts'ebetso ea ho fokotseha / ho eketseha ha mocha
- Senotlolo sa morao bakeng sa ho tsamaea
- OK / kenya konopo bakeng sa khetho
- Keketso ea boleng / ho fokotseha ha ts'ebetso
Cable Test Dongle
XMT-500 e ka leka likhoele tsa DMX tse hlephileng ha li hokahantsoe lipakeng tsa likhokahanyo tsa XLR tsa banna le basali. Leha ho le joalo, haeba u hloka ho leka lithapo tsa DMX kapa tsa Ethernet tse tsitsitseng, u ka sebelisa "cable test dongle". Hokela feela compact dongle pheletsong e 'ngoe ea thapo le XMT-500 pheletsong e' ngoe. Ebe, sebelisa karolo ea Cable Tester (sheba leqephe la 9) ho netefatsa thapo e hoketsoeng.
Litaelo tsa Tšebeliso ea Sehlahisoa
Leqephe la Lehae
Ha u qala ho bulela XMT-500, u tla bona leqephe la lehae. Sebelisa linotlolo tsa metsu ho tsamaisa lebokose la lintlha lipakeng tsa li-icon tsa app. Linotlolo tsena li ka boela tsa sebelisoa ho tsamaea lipakeng tsa likhetho ka har'a sesebelisoa le ho fetola litlhophiso. Ha sesebelisoa kapa khetho e hlokahalang e hlakisitsoe, tobetsa konopo ea OK. Tobetsa konopo ea Morao ho khutlela leqepheng le fetileng. Mesebetsi ea linotlolo tse 'ne e thathamisitsoe kaholimo ho eona skrineng. Ho view tlhophiso bakeng sa sesebelisoa se itseng, tobetsa konopo ea Litlhophiso (ha e sebelisoe lits'ebetsong tsohle).
Fumana App
Sesebelisoa sa Amohela se u lumella ho view maemo a kanale bakeng sa lets'oao le nepahetseng la ho kenya le amohetsoeng ho lihokelo tsa DMX le/kapa tsa Ethernet. Maemo a kanale/aterese a ka ba viewed ka decimal, hex, kapa percencetage notation.
- [Tsela] (Sheba leqepheng la 7)
- Decimal / Hex / Peresente
- Tsohle / Non-Zero (ha li khethiloe, li bonts'a feela likanale tse nang le boleng bo kaholimo ho 0)
Romella App
Send app e o lumella ho romella maemo a seteishene ho sesebelisoa se le seng kapa ho feta tse hoketsoeng ka lihokelo tsa DMX le/kapa Ethernet. Maemo a kanale/aterese a ka ba viewed ka decimal, hex, kapa percencetage notation.
- [Tsela] (Sheba leqepheng la 7)
- E khutlisetsa likanale tsohle ho zero
- Decimal / Hex / Peresente
- 5Hz / 10Hz / 15Hz / 20Hz / 25Hz / 30Hz / 35Hz / 40Hz / 44Hz
Ho tsamaisa tsela
Leqephe lena le fumaneha ho tsoa ho Send or Receive apps ka ho tobetsa konopo e bonolo ea [Routing]. Mosebetsi oa leqephe lena ke ho laola liprothokholo tse fapaneng tse tšehetsoeng: DMX ka lihokelo tsa XLR le/kapa Art-Net/sACN ka sehokelo sa RJ45. Protocol ea bohlokoa ka ho fetisisa e amoheloang kapa e rometsoeng e ea bontšoa. Sheba leqephe la 7 bakeng sa lintlha tse ling.
LBH
- P: Nka hlahloba joang lithapo tse tsitsitseng tsa DMX kapa tsa Ethernet?
A: Ho leka lithapo tse tsitsitseng tsa DMX kapa tsa Ethernet, sebelisa dongle ea teko ea cable. Hokela pheletsong e 'ngoe ea thapo ho dongle le pheletsong e' ngoe ho XMT-500. Ebe, sebelisa karolo ea Cable Tester (sheba leqephe la 9) ho netefatsa thapo e hoketsoeng. - P: Nka tsamaea joang lipakeng tsa lisebelisoa le likhetho?
A: Sebelisa linotlolo tsa metsu ho tsamaisa lebokose la lintlha lipakeng tsa li-icon tsa app le likhetho. Tobetsa konopo ea OK ho khetha sesebelisoa se totobalitsoeng kapa khetho. Tobetsa konopo ea Morao ho khutlela leqepheng le fetileng. - P: Nka khona joang view lintho tsa tlhophiso bakeng sa app e itseng?
A: Tobetsa konopo ea Litlhophiso (e sa sebelisoeng lits'ebetsong tsohle) ho view lintho tsa tlhophiso bakeng sa sesebelisoa se itseng.
Likaroloana
XMT-500 e na le ponts'o e hlakileng ea mebala e felletseng, keypad e matla ea membrane le betri e nchafatsoang Chassis e thata le likhokahano tse tsoetseng pele li netefatsa hore sesebelisoa sena se tla u sebeletsa ka ts'epo nako e telele.
Keypad
Cable Test Dongle
XMT-500 e ka leka likhoele tsa hau tsa DMX tse hlephileng ha li hokahane lipakeng tsa likhokahanyo tsa XLR tsa banna le basali. Haeba u hloka ho leka lithapo tsa DMX kapa tsa Ethernet tse tsitsitseng, sebelisa dongle ea teko ea cable. Hokela feela compact dongle pheletsong e 'ngoe ea thapo le XMT-500 ka lehlakoreng le leng - ebe u sebelisa karolo ea Cable Tester (sheba leqephe la 9) ho netefatsa thapo e hokahaneng.
Leqephe la Lehae
Ha u qala ho chencha XMT-500 u tla bona leqephe la lapeng:
- Sebelisa linotlolo tsa metsu ho tsamaisa lebokose la lintlha lipakeng tsa li-icon tsa app. Hape sebelisa linotlolo tsena ho tsamaea lipakeng tsa likhetho ka har'a sesebelisoa le ho fetola litlhophiso.
- Ha sesebelisoa kapa khetho e hlokahalang e hlakisitsoe, tobetsa konopo ea OK.
- Tobetsa konopo ea Morao ho khutlela leqepheng le fetileng.
- Lits'ebetso tse fetohang tsa linotlolo tse 'ne li thathamisitsoe kaholimo ho tsona skrineng.
- Ho view tlhophiso bakeng sa sesebelisoa se itseng, tobetsa konopo ea Litlhophiso (ha e sebelisoe lits'ebetsong tsohle).
Amohela
Sesebelisoa sena se u lumella ho view maemo a kanale bakeng sa lets'oao le nepahetseng la ho kenya le amohetsoeng ho lihokelo tsa DMX le/kapa tsa Ethernet. Maemo a kanale/aterese a ka ba viewed ka decimal, hex kapa percencetage notation.
Navigation
- Khetha mocha/aterese:
- View leqephe la Litlhophiso:
- View Leqephe la Routing:
[Tsamaiso] Sheba leqephe la 7 - Khutlela leqepheng le fetileng:
Leqephe la litlhophiso
- Hlahisa Boemo Joalo ka: Decimal / Hex / Peresente
- Mokhoa oa Aterese: Tsohle / Non-Zero (ha li khethiloe, li bonts'a feela likanale tse nang le boleng bo kaholimo ho 0)
Ho tsamaisa tsela
Leqephe lena le laola lintho tse tlang pele ha ho amoheloa liprothokholo tse peli kapa ho feta tse nepahetseng (DMX, Art-Net le/kapa sACN). Ke feela protocol ea bohlokoa ka ho fetisisa e amoheloang e bonts'ang. Sheba leqephe la 7.
Romela
Sesebelisoa sena se u lumella ho romella maemo a liteishene ho sesebelisoa se le seng kapa ho feta tse hokahaneng ka DMX le / kapa lihokelo tsa Ethernet Channel / liaterese maemo a ka ba teng. viewed ka decimal, hex kapa percencetage notation.
Navigation
- Khetha mocha/aterese:
- Fetola boemo ba seteishene:
- View leqephe la Litlhophiso:
- View Leqephe la Routing: [Tsamaiso] Sheba leqephe la 7
- Khutlela leqepheng le fetileng:
Leqephe la litlhophiso
- Hlakola Likanale Tsohle: E khutlisetsa likanale tsohle ho zero
- Hlahisa Boemo Joalo ka: Decimal / Hex / Peresente
- Sekhahla sa ho Nchafatsa: 5Hz / 10Hz / 15Hz / 20Hz / 25Hz / 30Hz / 35Hz / 40Hz / 44Hz
Ho tsamaisa tsela
Leqephe lena le laola hore na ke liprothokholo life (DMX, Art-Net le/kapa sACN) tse rometsoeng Tse fetang bonngoe li ka lumelloa Sheba leqephe la 7
Ho tsamaisa tsela
Leqephe lena le fumaneha ho tsoa ho li-app tsa Romela kapa Fumana ka ho tobetsa konopo e bonolo ea [Routing] Mosebetsi oa leqephe lena ke ho laola mekhoa e fapaneng e tšehetsoeng: DMX ka lihokelo tsa XLR le/kapa Art-Net / sACN ka sehokelo sa RJ45.
Ekaba lehlakore la Input kapa Output le tla sebetsa, ho ipapisitse le hore na ke sesebelisoa sefe se sebelisoang: Amohela kapa Romella matšoao a Art-Net le a sACN, sebelisa linotlolo ho khetha bokahohle bo hlokahalang
Kenyo (Amohela sesebelisoa)
Liprothokholo tse lumelletsoeng hona joale hore li amoheloe ke XMT-500 li bonts'oa ka li-checkbox tsa tsona tse tlatsitsoeng. Sesebelisoa sa Receive se tla hlahisa tlhahiso ea protocol e hlahlobiloeng ka ho fetesisa e amoheloang (le bokahohle bo khethiloeng) lethathamong lena.
Sephetho (Romela sesebelisoa)
Protocol e 'ngoe le e' ngoe e sebetsang e bonts'oa ka lebokose la tlhahlobo le tlatsitsoeng. Ho Send app, litekanyetso tse khethiloeng tsa mocha li romelloa ho protocol e 'ngoe le e 'ngoe ka tatellano Haeba ho hlokahala, sebelisa linotlolo tsa ho fetola bokahohle tse sebelisoang bakeng sa Art-Net & sACN.
Navigation
- Khetha mofuta oa lets'oao:
- Khetha bokahohle ba Art-Net/sACN:
- Khetha/khetha lets'oao:
- View Leqephe la Network Configuration: [Net Config] Sheba leqephe la 12
- Khutlisa boleng ba kamehla: [Ka boiketsetso]
- Khutlela leqepheng le fetileng:
RDM
Sesebelisoa sena se sebetsana le likarolo tsa Taolo ea Sesebelisoa sa Remote tsa lisebelisoa tse hoketsoeng tse tšehetsang protocol. Kamora ho buloa, ho tla etsoa sibollo ho fumana lisebelisoa tsohle tse tsamaellanang (litšibollo tse ntseng li eketseha le tsona li etsoa e le mosebetsi oa morao-rao) Lisebelisoa tse sibollotsoeng li tla hlahisoa ka tsela e latelang:
Navigation
- Etsa tšibollo e ncha: [Se sibolotsoeng]
- Totobatsa sebopeho se hlokahalang:
- Khetha setšoantšo se khabisitsoeng:
- Khutlela leqepheng le fetileng:
Lintlha tsa mofuta o khethiloeng li hlahisoa leqepheng le lecha Likhetho tse 'ne tsa linotlolo tse bonolo li u lumella ho:
- Beha lengolo la RDM
- Seta sebopeho bocha
- Fetola aterese ea ho qala
- Fetola sebopeho sa sebopeho
Cable Tester
Sesebelisoa sena se u lumella ho lekola likhoele tsa DMX le Ethernet Lithapo tsa Lose DMX li ka lekoa ka XMT-500 feela; Lithapo tse tsitsitseng tsa DMX le lithapo tsa Ethernet li hloka hore le dongle ea teko ea cable e sebelisoe hape - bona leqephe la 3
Loop ea DMX
Sesebelisoa se tla qala ho bonts'a leqephe la loop la DMX ho leka likhoele tse hlephileng tsa DMX tse hokahantsoeng lipakeng tsa li-sockets tsa XLR tse kentsoeng le tse tsoang.
DMX Dongle
Ha u leka thapo ea DMX pakeng tsa lihokelo tsa XLR tsa XMT-500 le dongle, tobetsa konopo e bonolo ea DMX Dongle ho bontša:
ETH Dongle
Ha u leka thapo ea Ethernet lipakeng tsa likhokahano tsa RJ45 tsa XMT-500 le dongle ea teko ea cable, tobetsa konopo e bonolo ea ETH Dongle ho bontša:
BOHLOKOA
Ha o le mokgweng wa teko ya cable:
- Le ka mohla u se ke ua hokela ho koung ea Ethernet e phelang
- Hakolla DMX ka botlalo ho XMT-500 ho nolofalletsa tlhahlobo ea Ethernet.
Sekaseka Lisebelisoa
Linako
Sesebelisoa sena se fana ka karohano ea linako tsa DMX bakeng sa matšoao a hokahaneng le sehokelo sa XMT-500 sa XLR.
Lintlha tse latelang li thathamisitsoe ka nako ea sebele:
- Boemo ba Letshwao - e bonts'a haeba lets'oao le le teng ebile ha le na liphoso.
- Sekhahla sa DMX: e bonts'a palo ea liforeimi tsa DMX motsotsoana.
- Slots DMX: e bonts'a hore na ho na le libaka tse kae tsa data ka har'a lipakete tsa DMX.
- MBB: Tšoaea Pele ho Phomolo - khefutso ea boleng bo holimo qetellong ea pakete ea data ea ho qetela, ea bolelele bo fapaneng.
- BRK: Ho robeha - khefutso ea boleng bo tlase ho bontša qalo ea pakete e ncha ea data.
- MAB: Tšoaea Ka mor'a Phomolo - khefutso ea boleng bo phahameng ho arola khefu ho data e latelang.
Linako tsa lipontšo
Litlhophiso tsa Sesebelisoa
Sesebelisoa sena se na le litlhophiso tse fapaneng tse amanang le ts'ebetso ea XMT-500, haholo-holo litlhophiso tsa marang-rang le matla.
Tsamaiso e akaretsang
- Khetha khetho/setting:
- Khutlela leqepheng le fetileng:
Litlhophiso tsa Marang-rang
Sebelisa ho hokahanya sebopeho sa XMT-500 le marang-rang a Art-Net / sACN.
- DHCP - ha e holofetse, Aterese ea IP, Subnet Mask le Gateway e ka hlophisoa ka letsoho ho khetha IP e tsitsitseng, ho seng joalo lintlha tsena li fanoe ke marang-rang. Haeba XMT-500 e sa khone ho fumana khiro ea DHCP ka nako, e tla khutlela ho sebelisa IP ea hajoale e sa fetoheng.
Litlhophiso tsa Matla
- Khanya - Khanya ea skrine ka mehato ea 10%. Ka ho feletseng: 50%
- Tlosa Sesebelisoa Ka mor'a - Koala / 2 Min / 5 Min / 10 Min / 30 Min / 1 Hora - ha ho na tlhahiso ea mosebedisi.
- Fokotsa Matla a Pontšo Ka mor'a - Ho Tloha / 15 Sec / 30 Sec / 1 Min / 2 Min - ka mor'a ho se kenye letsoho la mosebedisi.
Tlhahisoleseling ea Sesebelisoa - lintlha tse fapaneng tsa ka hare tsa XMT-500.
Lintlha mabapi le betri - tlhahisoleseding ea debug.
Khutlisa Litlhophiso tsa kamehla - e khutlisetsa XMT-500 litlhophisong tse tloaelehileng.
Ho tjhaja betri
Bakeng sa ho tjhaja, tjhaja efe kapa efe e tlwaelehileng ya USB e nang le bonyane 4.5W e ka sebediswa (boemakepe ba ho tjhaja bo na le sehokelo sa USB-C). Bakeng sa nako e fokolang ea ho tjhaja, re khothaletsa ho sebelisa e 'ngoe ea mefuta e latelang (e nang le adaptara ea USB-C moo ho hlokahalang):
- USB 3.2 Type-A (7.5W, 5V)
- USB Type-C ( >=7.5W, 5V)
- USB BC1.2 (7.5W, 5V)
Ho sebelisa litjhaja tsa USB 1.0 kapa 2.0 tse nang le matla a ka tlase ho 4.5W hoa khoneha empa ha ho khothalletsoe. Sena se tla nka nako e telele mme sistimi ea ts'ireletso ea kahare ea XMT-500 e ka emisa ts'ebetso ea ho tjhaja kamora lihora tse ngata tsa ho tjhaja.
Lintlha tsa tekheniki
- Boholo:
- Boima ba 'mele:
- Thempereichara ea ho sebetsa:
- Thempereichara ea ho tjhaja:
- Betri e ka tjhajwang hape:
- Litekanyetso tsa Protocol:
Art-Net™ E entsoe ke 'me e fuoe tokelo ea molao ke Artistic License Holdings Ltd
Mokhatlo oa Swisson AG
Fabrikstrasse 21
CH-3250 Lyss
Switzerland
SWISSON of AMERICA Corp. 2419 East Harbor Blvd.#3 Ventura, CA 93001
usa
www.swisson.com
info@swisson.com
©2023 Swisson AG • Ho lokolloa: 0.0c
Litokomane / Lisebelisoa
 |
SWISSon XMT-500 DMX Tester le RDM Ethernet Controller [pdf] Bukana ea Mosebelisi XMT-500, XMT-500 DMX Tester le RDM Ethernet Controller, DMX Tester le RDM Ethernet Controller, Tester le RDM Ethernet Controller, RDM Ethernet Controller, Ethernet Controller, Controller |