STONEX Cube-A Android Field Software
BOHLOKOA TSEBISO
Stonex Cube-a ke tharollo ea software e tsoetseng pele, ea tsohle-in-one e etselitsoeng ka ho khetheha bakeng sa lipatlisiso, geospatial, le litsebi tsa kaho. E hahiloe bakeng sa sethala sa Android mme e ntlafalitsoe bakeng sa meralo ea 64-bit, Cube-a e fana ka boiphihlelo bo bonolo, bo bonolo ba basebelisi bo nolofatsang pokello ea lintlha, ts'ebetso le taolo, e matlafatsa bafuputsi ho matlafatsa tlhahiso le ho nepahala tšimong.
Ho kopanya ka mokhoa o sa tsitsang le lisebelisoa tsa Stonex, ho kenyeletsoa ba amohelang GNSS le liteishene tse felletseng, hammoho le lisebelisoa tsa motho oa boraro, Cube-a e fana ka mokhoa oa modular o lumellang basebelisi ho kenya tšebetsong likarolo tsa bohlokoa tse kang taolo ea data ea GNSS, ts'ehetso ea seteishene sa liroboto le tsa mochini, ts'ebetso ea GIS, le bokhoni ba ho etsa mohlala oa 3D. Phetoho ena e etsa bonnete ba hore software e ka lokisoa ho fihlela litlhoko tse ikhethang tsa mosebelisi e mong le e mong.
Ka tšehetso ea boitšisinyo ba ho ama, Cube-a e sebetsa ka thata ho li-smartphones le matlapa, e e etsa molekane ea loketseng bakeng sa mosebetsi oa tšimo. Ho feta moo, ts'ehetso ea eona ea lipuo tse ngata e ntlafatsa ts'ebetso ea eona e fapaneng, e e etsa sesebelisoa se matla bakeng sa mefuta e mengata ea lipatlisiso le lits'ebetso tsa geospatial lefatšeng ka bophara.
LIMOLILOENG TSE KHOLO
Cube-a e fana ka maemo a feto-fetohang a modular, e nolofalletsang e 'ngoe le e' ngoe ea li-module tsa mantlha hore li sebelisoe ka bonngoe kapa li kopane bakeng sa tlhahlobo e tsoakiloeng, e lumellang basebelisi ho kopanya mekhoa e fapaneng ea tlhahlobo le ho holisa ts'ebetso ho latela litlhoko tsa bona tse ikhethileng.
GPS Module
Cube-a e lumellana ka botlalo le baamoheli bohle ba Stonex GNSS, e fana ka kopanyo e se nang moeli le ho hokahanya kapele ka RFID/NFC Bluetooth. tags le likhoutu tsa QR. E ts'ehetsa mefuta e fapaneng ea mekhoa, ho kenyelletsa Rover, Rover Stop&Go, Base, le Static, Cube-a e fana ka phetoho e hlokahalang bakeng sa lits'ebetso tse fapaneng tsa tlhahlobo.
Software e na le li-skrini tse ngata tse fanang ka lintlha tsa bohlokoa tsa nako ea nnete mabapi le boemo ba moamoheli oa GNSS. Basebelisi ba ka lekola lintlha tsa bohlokoa joalo ka boemo, Sky Plot, maemo a SNR, le boemo ba mantlha, ho netefatsa boiphihlelo bo bonolo le bo sebetsang ba tlhahlobo.
TS Module
Cube-a e ts'ehetsa liteishene tsa mochini le liroboto tsa Stonex Total, tse nolofalletsang likhokahano tse se nang mohala ka Bluetooth le Long-Range Bluetooth. Bakeng sa liteishene tsa liroboto, e fana ka bokhoni ba ho latela le ho batla prism.
Mojule ona o kenyelletsa likarolo tse kang sebopeho sa compensator, station on point, le sebaka sa mahala sa seteishene / bonyane ba lisekoere bakeng sa ho seta le ho beha maemo hantle. Ho feta moo, mekhoa ea ho lekanya ea othomathike ea F1 + F2 e nolofatsa litekanyo bakeng sa liteishene tse felletseng tsa mochini le liroboto, e tsamaisa mosebetsi oa hau le ho ntlafatsa ho nepahala.
Khokahano e Se nang Seam Pakeng Tsa Seteishene Kakaretso le Moamoheli oa GNSS
Cube-a e kopanya ka mokhoa o sa reroang litheknoloji tsa Total Station le GNSS, e lumellang bafuputsi ho chencha lipakeng tsa tsona ka pompo. Ho feto-fetoha ha maemo ho netefatsa mokhoa o motle oa ho lekanya bakeng sa boemo bofe kapa bofe, ho etsa hore Cube e be e loketseng mesebetsi e fapaneng ea tlhahlobo. E nolofatsa phapanyetsano ea data pakeng tsa molaoli le Total Station, e nolofalletsang ho fumana boitsebiso ba tšimo, ho fetisetsa le ho kopitsa ntle le ho khutlela ofising.
KEKELETSO MOLELE
Cube-a e fana ka monyetla oa ho holisa ts'ebetso ea mojule oa mantlha, e lumella ho itlhophisa ho ipapisitse le litlhoko tse ikhethileng. Li-module tsena tsa tlatsetso li ka kopanngoa ka mokhoa o se nang moeli le li-module tsa mantlha tsa GPS kapa TS, tsa ntlafatsa ts'ebetso ea sistimi le ho feto-fetoha ha maemo.
Setšoantšo sa GIS
Cube-a GIS Module ke sesebelisoa se matla sa ho hapa, ho sekaseka le ho laola lintlha tsa sebaka le sebaka ka har'a lipatlisiso tsa phallo ea mosebetsi. E tšehetsa ka botlalo sebopeho sa SHP ka litšoaneleho tsohle, e nolofalletsa taolo ea database e entsoeng ke software ea motho oa boraro, le ho hlophisoa ha masimo a libaka tsa database, ho kopanya lifoto, le ho theha li-tab tsa tloaelo. E loketse liindasteri tse kang meralo ea litoropo, taolo ea tikoloho le lipalangoang, Cube-a e ntlafatsa tšebetso ea GPS ka ho hula li-vector le ho lumella basebelisi ho etsa liforomo tsa data ka mokhoa o ikhethileng ka Moqapi oa Feature Set. Cube-a e tshehetsa sebopehofile, KML, le KMZ tse tsoang kantle ho naha, tse netefatsang hore li tsamaellana le mefuta e mengata ea software ea GIS bakeng sa ho arolelana data habonolo. E boetse e na le Utility Locator bakeng sa ho etsa 'mapa oa lits'ebeletso tsa ka tlas'a lefatše tse nang le litšobotsi tse ka khonehang. Software e khothalletsa ho kenngoa ha data ea GIS nakong ea ho fumana lintlha kapa vector mme e fana ka pono ea lera la WMS ho tsamaisa ts'ebetso ea tšimo le ho ntlafatsa katleho ea mosebetsi.
3D module
Cube-a 3D Module e ntlafatsa sebopeho sa nako ea 'nete le moralo oa litsela ka ho hokahana le DWG ntle le mokoloko. files bakeng sa ho lumellana hamonate le litšoantšo tse tloaelehileng tsa CAD. E boetse e ts'ehetsa lintlha tsa maru, e nolofalletsa basebelisi ho etsa mefuta e nepahetseng ea 3D, e etsa hore e be e loketseng bakeng sa merero ea ho etsa lipatlisiso le ea kaho. Mojule ona o kenyelletsa lisebelisoa tse tsoetseng pele tsa ho lekanya molumo bakeng sa mosebetsi o motle oa lefatše le palo ea lisebelisoa, ho ts'ehetsa tekanyetso e nepahetseng ea projeke le taolo ea lisebelisoa. Ho feta moo, e nolofatsa likarolo tsa li-centerlines le litekanyo tsa litsela, e netefatsa boemo bo nepahetseng ho latela litlhaloso tsa moralo. Mojule o ts'ehetsa LandXML bakeng sa ho kenya le ho hlalosa likarolo tsa tsela mme o lumella ho hlophisoa ha tšimo. Mekhoa e ikhethileng ea staking e fana ka phetoho bakeng sa litekanyo tse nepahetseng tsa bophahamo le litekanyo tsa sebaka sa seteishene, e etsa hore e ikamahanye le litlhoko tse fapaneng tsa projeke.
MOSEBETSI OA MOTHO
Tšehetso ea sebopeho sa Native DWG le DXF
Cube-a e fetola moralo le ho lekola phallo ea mosebetsi ka CAD e ntlafalitsoeng file tshebedisano le sehokelo se hlakileng. E ts'ehetsa liforomo tsa DWG le DXF, e netefatsa ho hokahana ka mokhoa o se nang moeli le lisebelisoa tse ling tsa CAD. Enjene ea eona e matla ea ho fana ka 2D le 3D e thusa pono e potlakileng, e qaqileng, e lumellang liphetoho tsa nako ea 'nete ka bobeli. views. E etselitsoe bafuputsi, Cube-a e na le sehokelo se ntlafalitsoeng, sesebelisoa se bohlale sa pointer, le lintlha tse hlakileng tsa ho kopanya lintlha tsa tšimo.
Litaelo tse hlophisitsoeng tsa stakeout li fana ka matšoao a litšoantšo le a tlhahlobo bakeng sa ho shebisisa ho nepahetseng, ho sebetsang hantle.
Photogrammetry le AR
Ka hare ho Cube-a, mesebetsi ea ba amohelang GNSS ka lik'hamera e ka sebelisoa. Cube-a e nolofatsa lintlha ka ho sebelisa lik'hamera tsa moamoheli, kh'amera e ka pele e bonts'ang ka ho hlaka sebaka se potolohileng ho thusa bafuputsi ho tseba hantle ntlha eo ba e ratang. Ha opareitara e ntse e atamela, sistimi e fetohela khamera e tlase ea moamoheli bakeng sa ho etsa moralo o nepahetseng, ho netefatsa litekanyo tse tšepahalang.
Cube-a's interface e sebelisa lithuso tse bonoang ho tataisa bafuputsi ho ea moo ho ts'oaroang hantle, ka ponts'o ea litšoantšo e bonts'ang tsela le sebaka sa ho fihla moo, e fetohang ha opareitara e ntse e atamela. Bakeng sa ho lekanya lintlha tse sa fihlelleheng, Cube-a e u lumella ho rekota video ea sebaka seo u batlang ho se lekanya. Ka mor'a moo, tsamaiso e ntša lifoto tse 'maloa tse thusang ho hokahanya lintlha tse lokelang ho lekanyetsoa, ho fana ka lihokahanyo tse baloang tse ka rekotoang habonolo. Ts'ebetso ena e boetse e sebetsa ntle le marang-rang, e netefatsa hore maemo a fetoha maemong a fapaneng.
Point Cloud le Mesh
E tšehetsa LAS/LAZ, RCS/RCP point cloud, OBJ mesh files, le XYZ files, Cube-a e thusa lipono tse nepahetseng tsa 3D ho tsoa ho data e hlahlobiloeng, e sebetsana ka katleho le li-database tse kholo ha e ntse e netefatsa phepelo ea nako ea nnete ea maru le meshes, e fana ka lintlha tse phahameng le ho nepahala.
Cube-a e fana ka lisebelisoa tse matla tsa ho etsa mohlala ka holim'a nako ea 'nete, ho kenyeletsoa khetho ea perimeter, mela e robehileng, le lipalo tsa molumo. Basebelisi ba ka khetha ho tsoa mefuteng e mengata ea ponts'o, joalo ka wireframe le li-triangles tse nang le moriti, 'me ba romelle data ea bokaholimo ntle le moroallo ka mefuta e fapaneng bakeng sa tlhahlobo e eketsehileng.
Ntle le mohlala oa 3D le khokahano ea maru a ntlha, Cube-a e ts'ehetsa DWG ea maemo a indasteri. files, e lumellang ho kenya thepa, ho romela thepa, le tšebelisano-mmoho ho pholletsa le liforomo tse fapaneng tsa CAD. Sena se tiisa ho kopanngoa ha mosebetsi ka mokhoa o bonolo le ho ntlafatsa ts'ebetso ea morero.
Lisebelisoa tsa ho bala molumo oa Cube-a li lumella basebelisi ho hlalosa le ho bala palo, hammoho le ho etsa ts'ebetso ea ho itšeha le ho tlatsa kapa palo ea lisebelisoa. Ts'ebetso ena ke ea bohlokoa haholo bakeng sa mesebetsi e kang ea lefatše, merafo le kaho, moo litekanyo tse nepahetseng tsa molumo li leng bohlokoa bakeng sa khakanyo ea litšenyehelo le taolo ea lisebelisoa.
LIEKETSENG TŠEBELE
| BOOKAMELI BA MORERO | GPS | GIS1 | TS | 3D2 |
| Tsamaiso ea Jobo | ✓ | ✓ | ||
| Laeborari ea Ntlha ea Lipatlisiso | ✓ | ✓ | ||
| Buka e ka fetolehang ea Tšimo | ✓ | ✓ | ||
| Litlhophiso tsa sistimi (liyuniti, ho nepahala, liparamente, jj.) | ✓ | ✓ | ||
| Kenya / romela kantle data ea tabular (CSV/XLSX/lifomate tse ling) | ✓ | ✓ | ||
| Kenya/romela kantle sebopeho sa ESRI files (ka litšoaneleho) | ✓ | |||
| Romella Google Earth KMZ (KML) ka linepe/Romela ho Google Earth | ✓ | |||
| Kenya KMZ (KML files) | ✓ | |||
| Kenya setšoantšo sa Raster | ✓ | ✓ | ||
| Metako ea Kantle (DXF/DWG/SHP) | ✓ | ✓ | ||
| Metako ea Kantle (LAS/LAZ/XYZ/OBJ/PLY) | ✓ | |||
| Kenya LAS/LAZ, Auto Desk® Re Cap® RCS/RCP, XYX leru la ntlha ea kantle files | ✓ | |||
| Kenya letlooeng la kantle la OBJ files | ✓ | |||
| Graphical Preview RCS/RCP point clouds, OBJ mesh files | ✓ | |||
| Arolelana files ka lits'ebeletso tsa leru, lengolo-tsoibila, Bluetooth, Wi-Fi | ✓ | ✓ | ||
| Ref. litsamaiso hape ka melaetsa ea RTCM e hole | ✓ | |||
| Likhoutu tsa likarolo (tafole ea likarolo tse ngata) | ✓ | ✓ | ||
| Fast Coding Panel | ✓ | ✓ | ||
| Tšehetso ea GIS e nang le litšobotsi tse ka khonehang | ✓ | |||
| Tšehetso ea WMS | ✓ | |||
| Ts'ehetso eohle ea brand Bluetooth disto | ✓ | ✓ | ||
| TSAMAISO YA GNSS | ||||
| Tšehetso bakeng sa ba amohelang Stonex | ✓ | |||
| Generic NMEA (tšehetso bakeng sa ba amohelang karolo ea boraro) - Rover feela | ✓ | |||
| Boemo ba moamoheli (boleng, boemo, leholimo view, lenane la li-satellite, lintlha tsa motheo) | ✓ | |||
| Ts'ehetso e felletseng ea likarolo tse kang E-Bubble, Tilt, Atlas, Sure Fix | ✓ | |||
| Tsamaiso ea likhokahano tsa marang-rang | ✓ | |||
| Tšehetso ea RTCM 2.x, RTCM 3.x, CMR, CMR + | ✓ | |||
| Tšehetso ea RTCM 2.x, RTCM 3.x, CMR, CMR + | ✓ | |||
| Moetso oa boiketsetso oa GNSS le ho lemoha likarolo | ✓ | |||
| Taolo ea offset ea antenna e ikemetseng | ✓ | |||
| Khokahano ea Bluetooth le Wi-Fi GNSS | ✓ | |||
| TS'ELAOA | ||||
| TS Bluetooth | ✓ | |||
| TS Long Range Bluetooth | ✓ | |||
| Batla le ho latedisa prism (Robotic feela) | ✓ | |||
| Compensator interface | ✓ | |||
| Seteishene sa mahala / Rection e nyane ea lisekoere | ✓ | |||
| TS orientation St. dev. le ho hlahloba mokhoa | ✓ | |||
| Palo ea motheo ea Topographic | ✓ | |||
| Fetolela sebakeng sa GPS3 | ✓ | |||
| Fetola ho ntlha e fanoeng | ✓ | |||
| Romella TS data e tala | ✓ | |||
| Romella kantle ho naha data e tala ea GPS+TS | ✓ | ✓ | ||
| Grid Scan5 | ✓ | |||
| F1 + F2 tekanyo e itekanetseng | ✓ | |||
| TS'ELISO TS'OANELO | GPS | GIS1 | TS | 3D2 |
| Sebaka sa sebaka ka ntlha e le 'ngoe le tse ngata | ✓ | ✓ | ||
| GPS ho grid le ka tsela e fapaneng | ✓ | |||
| Litsamaiso tsa litšupiso tse hlalositsoeng esale pele tsa cartographic | ✓ | ✓ | ||
| Li-grids tsa naha le li-geoid | ✓ | |||
| CAD e kopantsoeng ka ho phunyeha ha ntho le mesebetsi ea COGO | ✓ | ✓ | ||
| Layer management | ✓ | ✓ | ||
| Matšoao a Tloaelehileng le Laeborari ea Matšoao | ✓ | ✓ | ||
| Tsamaiso ea phumano ea mokhatlo | ✓ | ✓ | ||
| Tlhahlobo ea Lintlha | ✓ | ✓ | ||
| Palo ea lintlha tse patiloeng | ✓ | ✓ | ||
| Pokello ea lintlha tse ikemetseng | ✓ | ✓ | ||
| Fumana lintlha ho tsoa linepe ka tatellano (* mefuta e meng ea GNSS feela) | ✓ | |||
| Ho rekota data ea RAW bakeng sa ts'ebetso ea morao-rao ea Static le Kinematic | ✓ | |||
| Ntlha ea bohlokoa | ✓ | ✓ | ||
| Linepe tsa bohlokoa | ✓ | ✓ | ||
| Height Stakeout (TIN kapa sefofane se sekametseng | ✓ | ✓ | ||
| Visual Stakeout (* mefuta e meng ea GNSS feela | ✓ | |||
| Stakeout le litlaleho | ✓ | ✓ | ||
| Lipatlisiso Tse Kopanetsoeng3 | ✓ | ✓ | ||
| Mehato (sebaka, sebaka sa 3D, joalo-joalo) | ✓ | ✓ | ||
| Bontša mesebetsi (zoom, pan, joalo-joalo) | ✓ | ✓ | ||
| Lisebelisoa tsa ho lekola (boleng, betri le matšoao a tharollo) | ✓ | |||
| Ho bona setšoantšo ho Google Maps/Bing Maps/OSM | ✓ | ✓ | ||
| Fetola ponaletso ea 'mapa oa bokamorao | ✓ | ✓ | ||
| Potoloho ea 'mapa | ✓ | ✓ | ||
| Tilt / IMU Sensor Calibration | ✓ | |||
| Litaelo tsa leseli | ✓ | ✓ | ||
| Ntlha ea Sekhutlo | ✓ | |||
| Bokella ntlha ka maemo a 3 | ✓ | ✓ | ||
| Rekota Litlhophiso | ✓ | ✓ | ||
| COGO | ✓ | |||
| Sekeche sa mahala sa letsoho + setšoantšo sa lintlha tse bokeletsoeng | ✓ | ✓ | ||
| Pregeo (Boitsebiso ba Cadastral ea Italy) | ✓ | ✓ | ||
| Mefuta e matla ea 3D (TIN) | ✓ | |||
| Litšitiso (li-perimeters, mela ea khefu, masoba | ✓ | |||
| Lipalo tsa mesebetsi ea lefats'e (melumo) | ✓ | |||
| Ho theha mela ea contour | ✓ | |||
| Palo ea Melumo (TIN vs sefofane se sekametseng, TIN vs TIN computation ea volume, joalo-joalo) | ✓ | |||
| Litlaleho tsa lipalo | ✓ | |||
| Palo ea nako ea 'nete ea li-contour lines/isolines | ✓ | ✓ | ||
| Melato ea litsela | ✓ | |||
| Raster dereferencing | ✓ | ✓ | ||
| Fetosa opacity ea litšoantšo tsa raster | ✓ | ✓ | ||
| Hokela ho Utility Locators | ✓ | |||
| LandXML export/import | ✓ | |||
| KAKARETSO | ||||
| Lintlafatso tsa SW tse iketsang4 | ✓ | ✓ | ||
| Tšehetso e tobileng ea tekheniki | ✓ | ✓ | ||
| Lipuo tse ngata | ✓ | ✓ | ||
- GIS e fumaneha ha feela mojule wa GPS o butswe
- 3D e fumaneha feela haeba mojule oa GPS le/kapa TS o butsoitse
- E fumaneha ha feela dimojule tsa GPS le TS di butswe
- Ho hlokahala khokahano ea Marang-rang. Litefiso tse ling li ka sebetsa.
- Grid Scan e fumaneha ka Stonex R180 Robotic Total Station
Lipapiso, litlhaloso le litlhaloso tsa tekheniki ha li tlame ebile li ka fetoha
Viale dell'Industria 53
20037 Paderno Dugnano (MI) - Italy
+39 02 78619201 | info@stonex.it
stonex.it
STONEX TUMELO MOHOEBI
MK.1.1 – REV03 – CUBE-A – MARCH 2025 – VER01
Litokomane / Lisebelisoa
 |
STONEX Cube-A Android Field Software [pdf] Bukana ea Mosebelisi Cube-A Android Field Software, Software |