Spanet SV-4T Support Hub Controller
FEELAVIEW
BONTŠA LITŠOANTŠISO TSA MOSEBETSI
Mocheso oa Metsi
Beha Mocheso
Tshupanako
LIEKETSENG MENU
Letšoao la menu ea nako ea ho robala
Letšoao la menu e khanyang
Letšoao la menu ea blower
STATUS LITLHAKISO
Konopo e notletsoe
Sanitize cycle e sebetsa
Filtration cycle e sebetsa
Maemo a phoso a etsahetse
SEBELISA TAELO
FETOHA LESENYA
Ha lebone le qala ho khantšoa, skrine e tla bontša mokhoa oa hona joale oa khanya o ntseng o sebelisoa. Tobetsa (kapa konopo ho feta khetho ea mekhoa e khanyang:
- TŠOANE
- Leseli le Lesoeu
- UCLR
- Mmala wa Mosebedisi
- TLOTLISO
- Fade Effect
- MOHATO
- Mohato oa Phello
- MOKHATLO
- Phello ea Mokete
HO FETOHA LEBELO LA LESENYA KAPA MALA OA LESENYA
Ho latela mokhoa oa leseli o khethileng Leseli (spd/cir) 
konopo e tla kenya e 'ngoe ea li-skrini tse tharo tsa khetho ea mokhoa o khanyang.
- CL: XX
- Nomoro ea 'Mala oa Mosebelisi
- L.SPD
- Lebelo la Phetoho ea Leseli
- L.BRT
- Leseli Leseli
- Tobetsa
konopo ho lokisa boemo bo bong le bo bong. - Tobetsa konopo ea OK ho boloka tlhophiso e 'ngoe le e 'ngoe ebe u ea ho setting e latelang.
Hlokomela: Litlhophiso tsohle tsa mabone li boloketsoe ts'ebeliso ea ON / OFF nakong e tlang.
SEKONYANA SEKONYANE
Tobetsa 'me u tšoare konopo ena ho fihlela LOCK e hlaha skrineng:
Pheta motsoako oa konopo ho notlolla.
Hlokomela: Hang ha e notletsoe haeba konopo leha e le efe e tobelitsoe konopo ea konopo e tla hlokomolohuoa 'me pontšo e tla bontša LOCK.
KAROLO SEKOPI
Tobetsa 'me u tšoare konopo ena ho fihlela LOCK e hlaha skrineng:
Pheta motsoako oa konopo ho notlolla.
Hlokomela: Hang ha ho notletsoe feela ho ka sebelisoa likonopo tsa lipompo, li-blower, light, le sanitize. Ho fihlella likonopo tse ling kaofela ho koetsoe.
HLOMELA MENU
- Menu ea ho seta e lumella ho itlhophisa ha li-setting tsa li-control tse fetolehang. Ho fihlella ho menu le liphetoho tsa lintho li etsoa ka tsela e latelang:
- Tobetsa o hatelle likonopo hammoho ho fihlela [MODE] e hlahisoa.
- Tobetsa ho tsamaea ka har'a lintho tsa menu ea ho seta.
- Tobetsa OK ho kenya tokiso ya ntho.
- Tobetsa ho lokisa maemo.
- Tobetsa OK ho netefatsa tlhophiso le ho tsoa.
Lintho tsohle tsa menu ea ho seta li latela mokhoa o tšoanang oa ho lokisa. Lintho tsa menu tse ka fetoloang ke tse latelang:
[MOEMO] MEKHOA EA TSEBE
Mekhoa ea ho sebetsa e ama boitšoaro ba ho futhumatsa le ho sefa. Likhetho ke:
- Tlwaelo Tloaelehileng ho futhumatsa & filtration
- HLALELE Ho futhumatsa ho koetsoe. Filtration e fokotsehile ho isa ho 1hr p/letsatsi.
- BEKETSO Mon-Thu (e sebetsa joalo ka AWAY mode) Fri-Sun (e sebetsa joalo ka mokhoa oa NORM)
[SEFA] NAKO YA LETSATSI LA HO FITLA
Fetola lihora tsa ho sefa ka letsatsi. Meeli ea ho sefa e fapana ho latela mofuta oa pompo:
- Circ Pump (2A kapa ka tlase) 1-24 hrs
- Jet Pump (2spd kapa 1spd) lihora tse 1-8
[F.CYC] LIBAKA TSA HO HLAPA
Tlhophiso ena e hlalosa hore na lipotoloho tsa filtration li etsahala hangata hakae. Filtration e ka hlophisoa hore e sebetse ka mor'a 1/2/3/4/6/8/12 kapa lihora tse 24
[SNZE] ROBALA TIMERS
E sebelisoa ho tima ho futhumatsa le ho sefa ka linako tse itseng tsa motšehare kapa bosiu. Ha u kena ho menu ea SNZE ho na le likhetho tse 'nè:
- SNZ
- Nako ea ho Robala #1
- SNZ
- Nako ea ho Robala #2
- R. LEBETSENG
- Seta libapa-nako bocha hore e be tsa kamehla
- ETSOA
- Tloha ho menu ea sebali sa nako ea ho robala
Ho hlokahala hore ho behoe nako e le 'ngoe feela ea ho robala, leha ho le joalo, ho fanoe ka linako tse peli ho thusa litlhophiso tse fapaneng tsa ho robala ka matsatsi a fapaneng. Tlhophiso e 'ngoe le e 'ngoe ea nako ea ho robala e na le maemo a letsatsi la beke, nako ea ho qala, le nako ea ho emisa (sheba ka tlase).
- x. LETSATSI Matsatsi a ts'ebetso
- x.BGN Nako ea ho robala e qala nako
- X.QETELA Nako ea ho qetela ea nako ea ho robala
Sebelisa likonopo tsa Up, Down & OK ho lokisa le ho netefatsa boemo bo bong le bo bong.
[P.SAV] BOLOKA MATLA (ho tloha tlhorong)
Fokotsa litšenyehelo tsa ts'ebetso ka ho fokotsa ho sefa le ho futhumatsa ho etsahala ka linako tse theko e tlaase tsa motlakase. Ho na le mefuta e meraro ea P.SAV:
- TLOA P.SAV e holofetse
- PHAKOANE Filtration ea off-peak feela
- PHAHAMENG Filtration le ho futhumatsa ka ntle ho tlhoro
Hang ha mokhoa oa P.SAV o khethiloe nako ea ho qala le ea ho qetela ea litefiso tsa motlakase tsa PEAK li tlameha ho behoa hore taolo e tsebe HA E SEBELE ka lihora tseo tse phahameng haholo.
- BGN Matla a holimo a qala nako
- QETA Nako ea ho qetela ea matla a holimo
[W.CLN] MOSEBETSI OA HLAHISA
Fetola nako ea ho qala ha potoloho ea letsatsi le letsatsi ea metsotso e 10 ea sanitizing. Litlhophiso li ka fetoloa ho tloha ka 0:00 ho isa ho 23:59.
[D.DIS] MOKHOA OA BONTŠO OA TSAMAEA
E sebedisetswa ho lokisa mokgwa wa pontsho wa kamehla o bontshitsweng letlapeng la dikonopo. Likhetho tsa ho khetha:
- W.TMP Mocheso oa Metsi
- S.TMP Beha Mocheso
- NAKO Tshupanako
[T.OUT] TLHOKOMELO NAKO
Meroalo eohle ea lisebelisoa (lipompo le li-blower) e itima ka bo eona ka mor'a hore nako e felile. Fetola nako ea ho tsoa ho tloha metsotso e 10-60.
[H.PMP] MOKHOA OA PUMP EA MOCHESO
E hlalosa mokhoa oa ho sebetsa oa pompo ea mocheso:
- AUTO Heat & Cool
- Mocheso Mocheso Feela
- PHOLISE Cool Feela
- TLOA pompo ea Mocheso E holofetse
[H.ELE] TLHOKOMELISO
E nolofalletsa/e tima karolo ea motlakase ea SV ho matlafatsa pompo ea mocheso haeba mocheso oa metsi o le 2°C kapa ho feta ka tlase ho ntlha ea mocheso o behiloeng KAPA pompo ea mocheso esale e sebetsa nako e fetang 1hr.
- TLOA Element e koetsoe (pompo ea mocheso feela)
- ON SV element + pompo ea mocheso
Litokomane / Lisebelisoa
 |
Spanet SV-4T Support Hub Controller [pdf] Bukana ea Mosebelisi SV-4T Support Hub Controller, SV-4T, Support Hub Controller, Hub Controller, Controller |
