CIR-44
Boemo bo tiileng ba Premium
TŠEBELETSO TSA MOREKI
TAELO LEQEPHE
CIR-44 Customer Interface Relay
TS'ELISO - CIR-44 e na le sebaka se sireletsang boemo ba leholimo sa NEMA4X le lerōle. CIR-44 e ka beoa sebakeng sefe kapa sefe, empa ka kakaretso e bonolo haholo ebile e etselitsoe hore e behoe ka hinge e ka lehlakoreng le letšehali ho ea ka mokhoa o bontšitsoeng ka holimo. Ho fanoe ka likoti tse 'nè tsa ho kenya.
KENO EA MATLA - Bakeng sa matla a 120 ho isa ho 277 VAC, hokela "hot" lead to theminal LINE. Hokela terminal ea NEU ho se nke lehlakore. Hokela terminal ea GND sebakeng sa sistimi ea motlakase. CIR-44 e tlameha ho kengoa ho Mokhahlelo ho ea ho Boema-fofane, eseng Mokhahlelo ho ea ho Mokhahlelo. Haeba ho se na lehlakore la 'nete le fumanehang, hokela liteishene tsa NEU le GND sebakeng sa sistimi ea motlakase. Theminale ea GND E TLAMEHA ho hokeloa. U SE KE UA tlohela terminal ea GND e sa hokahanngoa.
MAKHOKANO A METER - Lisebelisoa tse 'nè tsa 2-Wire (Form A) li fanoa ho CIR-44. Hokela likhoele tsa K le Y ho tloha mithareng ka 'ngoe. Hokela methati ea K & Y ho tloha ho Meter #1's dry-contact pulse output ho ea ho litheminale tsa K & Y ho INPUT #1 ea mohala oa theminale phaposing ea lisebelisoa. Hokela Meter #2 ho ea ho litheminale tsa K & Y tsa Input #2, joalo-joalo. The input ea Y e fana ka "hulled up" wetting (sense) vol.tage ea +12VDC ho ea ho litheminale tsa "Y" tsa limithara. Li-terminals tsa "K" tsa CIR44 li fana ka phaello e tloaelehileng. Lisebelisoa tsa CIR-44's KY li tsamaisana le li-electromechanical kapa solid state pulse intiators. Ha o sebelisa mochine o bulehileng oa NPN Bi-Polar transistor output kapa open-drain N-Channel FET transistor ho hokahanya mitha le CIR-44, phini ea emitter(-) ea transistor kapa mohloli(-) oa FET e tlameha ho hokeloa ho terminal ea ho kenya. Moqokelli oa transistor(+) kapa phini ea drain(+) ea FET e tlameha ho hokeloa ho terminal ea Y. Kenyelletso e 'ngoe le e 'ngoe ea Y e na le LED e TŠEHLA ka phaposing ea bareki ho bontša ha Y e sebetsa.
LIEKETSO - Ho fanoe ka lihlahisoa tse 'nè tse arohaneng tsa terata tse peli ho CIR-44, tse nang le li-terminals tsa K1 & Y1, K2 & Y2, K3 & Y3, le K4 & Y4 'me li fumaneha ka tlaase ho sebaka se ka hare ho phaposi ea bareki. Lintho tse hlahisoang ke mofuta o tiileng oa boemo bo omeletseng 'me li tlameha ho fuoa matla a ho kolobisatage ho tsoa mohloling o kantle, hangata o fanoa ke sesebelisoa se amohelang pulse. Mabitso a fuoe lintlha tsa 120VAC/VDC MAX 'me hajoale a lekanyelitsoe ho 180mA. Khatello ea nakoana bakeng sa likhokahano tsa li-relays tse tiileng tsa mmuso li fanoa ka hare. Relay e 'ngoe le e' ngoe e tlameha ho abeloa kapa ho "maptjoa" ho e 'ngoe ea litsela tse' nè tsa ho kenya, ho sebelisa SSI Universal Programmer V1.1.0 kapa hamorao. Li-LED ho sephetho ka seng li bonts'a boemo ba sephetho. Li-LED tse TLHALA li bonts'a ho koaloa ha KY ea tlhahiso ka 'ngoe.
Setšoantšo sa CIR-44 Wiring
CIR-44WiringDiagram.vsd
| Setšoantšo sa CIR-44 se Phetang Pulse Relay Wiring | TS'ELISO TS'OANELO | ||||
| NO. | LETSATSI | TLHALOSO | |||
| LETSATSI MOKHABANE 05/10/24 |
SEKETSO N/A |
||||
| TS'OANELO MOTS'OANE | MOSEBETSI NO. | TS'ELISO | WHB | ||
Brayden Automation Corp./Solid State Instruments div.
6230 Aviation Circle Loveland, CO 80538 (970)461-9600
support@brayden.com
www.solidstateinstruments.com
BOKGOLO BOKGOLO BA MATLA A HO HLAHELA - Lisebelisoa tse hlahisoang li behiloe maemong a holimo ho 1500 mW. Tlhokomelo e lokela ho nkoa ho netefatsa hore ho kolobisa voltage sebelisitsoeng ho pholletsa le lisebelisoa tse hlahisoang ka makhetlo a hona joale (kapa moroalo) oa ho kenya mochine o tlaase, ha o fete matla a mangata a ho qhala matla a 1500mW. Hangata sena ha se bothata kaha lisebelisoa tse ngata tsa lisebelisoa tse tlase li na le ts'oaetso e phahameng 'me li hlahisa moroalo o tlase haholo, hangata o ka tlase ho 10mA. Bakeng sa mohlalaample, haeba 120VAC e sebelisoa, boholo ba hona joale bo lumelletsoeng ho pholletsa le tlhahiso ke 12.5 mA. Haeba 12VDC e sebelisoa, boholo ba hona joale bo lumelletsoeng ho pholletsa le tlhahiso ke hoo e ka bang 125mA, hantle tlas'a tekanyo ea hona joale ea 180mA ea sesebelisoa. Ka hona, boholo ba dissipation ha u sebelisa 12V ke 1500mW kaha hona joale e lekanyelitsoe ho .125 Amp. Bala boholo ba hona joale u sebelisa foromo e latelang: 1500milliWatts / Voltage = Max. Hona joale (moroalo) ka milliamps. Fetola molumotage kapa ea hona joale e sebelisoang ho pholletsa le tlhahiso ho netefatsa hore boholo ba ho felloa ke matla, voltage le boholo ba hona joale ha bo fete.
FUSES - Sehlahisoa se seng le se seng se na le Fuse ea ho iketsetsa bocha e lekantsoeng ho 150mA. F1, F2, F3 le F4 li lumellana le liphetho tsa 1, 2, 3, le 4, ka ho latellana. Litekanyo tse kholo tsa fuse li behiloe skrineng sa silika tlas'a kapa haufi le sebaka se seng le se seng sa fuse.
ETSA BOBALA BA PULSE - Ketsahalong eo mosebelisi a hlokang bophara bo tsitsitseng ba pulse ho sephetho, bophara ba pulse ho tloha .00001 metsotsoana ho ea ho metsotsoana ea 10000 e ka hlophisoa. Bolelele bo tsitsitseng ba tlhahiso bo holofalitsoe ka ho kenya 0.0000 joalo ka bophara ba pulse. Sena se beha tlhahiso ka mokhoa oa ho fetola kapa "Mirror" moo nako ea tlhahiso e lekanang le nako ea ho kenya.
MEKHOA EA HO SEBELISA - CIR-44 e na le mekhoa e meraro ea ts'ebetso ka tsela e latelang:
1.) Foromo A In/Foromo A Out - Feta thru; Nako ea ho koala sephetho e lekana le nako ea ho koala sephetho.
2.) Foromo A In / Foromo A Out - Feta thru ka Fixed Width Output nako.
3.) Foromo ea A In/ Foromo ea A Out - Mokhoa oa Phetoho o nang le litekanyetso tse khethiloeng tsa Kenyeletso le Liphetho.
Mekhoa ena e abeloa ke batho ba kenang ka har'a tafole ea mananeo.
KAKARETSO - CIR-44 e khona ho etsa kakaretso ea lintlha tse 'ne ho tse' nè, ka boleng bo nepahetseng (bo tlisitsoeng) ore negative (e amohetsoeng). Ka tsela ena, CIR-44 e u lumella ho "Net Out" matla lipakeng tsa matla a fanoeng le a Amohetseng. Meeli e Negative e boetse e behiloe ho netefatsa hore boleng bo fosahetseng bo ke keng ba tsoela pele bo bobe ho feta moeli o behiloeng. Maemo a pulse le ona a ka hlophisoa bakeng sa litekanyetso tsa ho kenya le ho tsoa e le hore litekanyetso tsa 'nete tsa pulse ho tloha ho limithara tse fapaneng li ka kenyelletsoa ka nepo. Sheba Buka ea SoCo Programmer bakeng sa
lintlha tse qaqileng mabapi le kakaretso.
HO SEBETSA LE CIR-44 RELAY
MEKHOA EA HO SEBELISA: CIR-44 Programmable Customer Interface Relay e na le mekhoa e 3 ea ts'ebetso. E 'ngoe ke "Pass-Thru", ea bobeli ke "Fixed-Width" mode ea tlhahiso 'me ea boraro ke "Value Conversion" mode. E 'ngoe ea mekhoa ena e ka sebelisoa kapa ntle le ts'ebetso ea kakaretso.
Mokhoa oa 1 - Foromo ea A In / Foromo ea A Out: Ka mokhoa ona oa Pass-Thru, ho kenya letsoho le tlhahiso li behiloe ho Foromo ea A (2-wire) mode 'me Width e tsitsitseng ea Output Pulse e thibetsoe. Liphetho tsa Foromo ea A li latela tlhahiso ea Foromo A. Bophara ba phallo ea sephetho bo lekana le bophara ba sekhahla sa ho kenya letsoho.
Setšoantšo sa 1: Foromo ea Input/FormA Output Operation Mokhoa o Tloaelehileng
Mokhoa oa 2 - Foromo ea In / Foromo ea A Out e nang le Output Pulse Width e tsitsitseng: Mokhoeng ona o Fixed Width, tlhahiso ea Foromo A e latela tlhahiso ea Foromo ea A, empa e koala nako e khethiloeng ea bophara ba sekhahla.
Setšoantšo sa 3: Etsa Ts'ebetso ea Input/FormA Output Pulse e tsitsitseng ea Width Output
Ka mokhoa ona, bophara ba phallo ea phallo e behiloe ho 50mS, ho fihla ho 10,000mS, kahoo maqhubu a hlahisoang ke bophara bo tsitsitseng ( 
) joalo ka ha ho hlalositsoe ke lebokose la ho kena la Pulse Width. Li-pulse tsa ho kenya li tla potlakisa le ho fokotsa nako e le hore nako e pakeng tsa li-pulse e fetohe, empa nako ea nako (T1) ea pulse e tsitsitse. Haeba li-pulse tsa ho kenya li potlakile ho feta li-pulse tsa tlhahiso, ho ka ba le phallo e ngata ka mokhoa ona. Seo se bolela hore li-pulse tsa tlhahiso ha li khone ho tsamaisana le li-pulse tse kenang ka lebaka la lithibelo tsa nako tsa bophara bo tsitsitseng ba pulse. Khetha bophara bo khuts'oane ho feta lebelo la ho kenya letsoho ka potlako kapa tima bophara bo tsitsitseng, ebe o tobetsa ho .
Mokhoa oa 3 - Foromo ea A In/Form A Out, Pulse Value Conversion Mode: Mokgweng ona, boleng ba Input le Output pulse bo kenngwa lenaneong. Ka nako e 'ngoe le e 'ngoe ha ho koaloa tlhahiso ea Foromo ea A, boleng ba sekhahla se kenngoa ho rejisetara ea Accrued Energy Value (AER). Ha boleng ho AER bo lekana kapa bo boholo ho feta boleng ba sephetho se hlophisitsoeng, sekhahla se joalo
hlahisitsoe. Ts'ebetso ena ea ho fetolela e lumella ho kenya le ho hlahisa boleng ba pulse hore bo fapane.
Setšoantšo sa 4: Foromo ea Input/FormA Output Operation Pulse Value Conversion Mode
Bakeng sa ExampLeha ho le joalo, ha re nke hore li-pulse tsa hau li lekana le lihora tse 2.88 tsa watt ka lebelo le leng le le leng. Ho feta moo, a re nke hore boleng ba pulse ea hau e behiloe ho 4.00 watt-hora ho phatloha ka 'ngoe. Pulse ea pele e kenya 2.88 ho registara ea Matla a Accrued (AER). Ha ho tlhahiso ea pulse e hlahisoang. Pulse ea bobeli e amohetse AER ka 2.88 e 'ngoe e fanang ka 5.76 wh. 5.76 e kholo ho feta 4 kahoo pulse e hlahisoa. Karolo e setseng ea 1.76 e setseng ho AER. Phallo ea boraro ea ho kenya 2.88 e eketsa AER e fanang ka tekanyo ea 4.64 wh. Phallo e 'ngoe e hlahisoang e hlahisoa, e siea .64 wh ho rejisetara. Pulse ea bone ea ho kenya e eketsa 2.88 ho AER e fana ka tekanyo e ncha ea 3.52 wh. Sena ha sea lekana ho hlahisa pulse, kahoo 3.52 e tšoaroa ho AER ho fihlela pululo ea 5 e amoheloa, ka nako eo ho hlahisoang sekhahla se seng. Ts'ebetso ena e ntse e tsoela pele, ho etsa bonnete ba hore likhahla tse hlahisoang li lekana le 4.00 Wh's e le 'ngoe. Joalo ka ha u bona sena se theha sebopeho sa assymmetrical pulse empa se fetola boleng ho tloha ho 2.88wh/ pulse ho ea 4.00 wh/pulse.
Ho etsa 'mapa oa Sephetho se seng le se seng ho ea ho Kenyelletso: Liphetho tse 'ne tsa CIR-44 li tlameha ho abeloa, kapa "mapa", ho e' ngoe ea lintho tse kenang. Sephetho se fe kapa se fe se ka etsoa 'mapa ho e 'ngoe ea lintho tse nne.
Tokiso ea kamehla ke 1 ho isa ho 1, 2 ho isa ho 2, 3 ho isa ho 3 le 4 ho isa ho 4. Sena se bitsoa 4x4 tlhophiso mme ke tlhophiso ea kamehla. Tlhophiso ena, tlhahiso e 'ngoe le e' ngoe e tlameletsoe ho kenya palo e tšoanang.
Tlhophiso efe kapa efe kapa motswako ofe kapa ofe wa diphetho ho tse kentsweng di a kgoneha ho itshetlehile ka tshebediso. Litholoana tsohle tse 'ne li ka abeloa tlhahiso e le' ngoe e fanang ka likhokahano tse 'ne tse ikhethileng. Lintho tse kentsoeng tse sa sebelisoeng li ka tingoa.
Tlhophiso e 'ngoe e tsebahalang ke "24" moo liphetho tse peli li latelang sephetho se le seng. Bakeng sa mohlalaample dipholo tsa #1 le #2 di latela tlhahiso #1 mme diphetho #3 le #4 di latela Kenyeletso #2. Ka hona,
Maikutlo #3 le #4 ha a sebelisoe. Tokiso ena hangata e sebelisoa bakeng sa ho tsamaisoa le ho amoheloa ha kWh pulses, kapa bakeng sa kWh le kVARh pulses.
Ikopanye le feme bakeng sa tšehetso ea tekheniki ho (888)272-9336.
Moqapi oa SOCO
SoCo Programer ke sesebelisoa sa mananeo a thehiloeng lifensetereng bakeng sa CIR-44 Series. Khoasolla Lenaneo la SoCo ho tsoa leqepheng la CIR-44 ho SSI website at www.solidstateinstruments.com/sitepages/downloads.php. Leqephe la Programmer le bontšitsoe ka tlase. Ka kopo bona bukana ea SOCO Programming bakeng sa litaelo tsa mokhoa oa ho hlophisa CIR-44.
Seta Li-Defaults tsa Feme- U ka seta bocha CIR-44 ho mefokolo ea feme ka ho tobetsa konopo ea Defaults.
LITS'ELISITSO TSA 'MUSO
karolo ea sehlopha sa Brayden Automation Corp.
6230 Aviation Circle, Loveland, Colorado 80538
Mohala: (970)461-9600 Fax: (970)461-9605
E-mail:support@solidstateinstruments.com
Litokomane / Lisebelisoa
 |
Lisebelisoa tsa Naha tse Tiileng CIR-44 Customer Interface Relay [pdf] Litaelo CIR-44 Customer Interface Relay, CIR-44, Customer Interface Relay, Interface Relay |
