Hydro: Evolved Smartrise Hydraulic Controller

Litlhaloso

• Mohlala: Hydro: Evolved
• Phetolelo: 1.01
• Letsatsi: Hlakola 24, 2025

Litaelo tsa Tšebeliso ea Sehlahisoa:

Tlhophiso ea Bohole ba Boemo (P1 le P3):Tlhaloso: E fetola sebaka sa boemo ho ea holimo le tlase.

Tlhophiso:

1. Eya ho Main Menu.
2. Eya ho Debug.
3. Eya ho Edit Parameters.
4. Khetha Fomete ea Decimal.
5. Beha paramethara 08-0024 (bakeng sa P1) kapa 08-0038 (bakeng sa P3) ho latela lipalo tse fanoeng.
6. Tsamaisetsa ho le letona ebe o tobetsa Boloka.

TSRD Offset Ho tsoa ho NTS:Tlhaloso: E fetola sebaka sa ho khoptjoa sa TSRD mabapi le sebaka sa ho khoptjoa sa NTS.

Hlokomela: Ts'ebetso feela e lebile holimo.

Tlhophiso:

1. Eya ho Main Menu.
2. Eya ho Debug.
3. Eya ho Edit Parameters.
4. Khetha Fomete ea Decimal.
5. Beha paramente 08-0128.
6. Tsamaisetsa ho le letona ebe o tobetsa Boloka.

08-0024 P1 Leveling Distance 5mm

• Tlhaloso: E eketsa sebaka se lekanang le sebaka se ntseng se le teng sa butle se sebelisoang ho ea holimo, e lelefatsa nako eo koloi e sebetsang ka eona ka lebelo le holimo pele e fihla fatše. Li-unit li lekantsoe ka li-increments tsa 0.2-inch.
• Slowdown Distance = P1 Leveling Distance + Original Slowdown Distance UP

Tlhophiso: 

1. Eya ho Main Menu.
2. Eya ho Debug.
3. Eya ho Edit Parameters.
4. Khetha Fomete ea Decimal.
5. Beha paramethara 08-0024 [sheba equation ka holimo].
6. Tsamaisetsa ho le letona ebe o tobetsa Boloka.

08-0038 P3 Leveling Distance 5mm 

Tlhaloso: E eketsa sebaka se lekanang le sebaka se ntseng se le teng sa butle se sebelisoang ho ea tlase, e lelefatsa nako eo koloi e sebetsang ka eona ka lebelo le holimo pele e fihla fatše. Li-unit li lekantsoe ka li-increments tsa 0.2-inch.

• Slowdown Distance = P3 Leveling Distance + Original Slowdown Distance TLASE

Tlhophiso: 

1. Eya ho Main Menu.
2. Eya ho Debug.
3. Eya ho Edit Parameters.
4. Khetha Fomete ea Decimal.
5. Beha paramethara 08-0038 [sheba equation ka holimo].
6. Tsamaisetsa ho le letona ebe o tobetsa Boloka.

08-0128 TSRD Offset From NTS

• Tlhaloso: e lokisa sebaka sa ho khoptjoa sa TSRD mabapi le sebaka sa ho khoptjoa sa NTS (sebaka sa Slowdown). Haeba lebelo la koloi le feta moeli oa lebelo ho e 'ngoe ea lintlha tsena ka mor'a nako e behiloeng, koloi e tla khoptjoa ke TSRD.
• HLOKOMELA: Paramethara ena e ka etsoa feela ha koloi e tsamaea e lebile holimo.

Tlhophiso:

1. Eya ho Main Menu.
2. Eya ho Debug.
3. Eya ho Edit Parameters.
4. Khetha Fomete ea Decimal.
5. Beha paramente 08-0128.
6. Tsamaisetsa ho le letona ebe o tobetsa Boloka.

08-0139 NTS Debounce

• Tlhaloso: E hlalosa nako ea ho lieha ka mor'a hore koloi e fete sebaka sa leeto la NTS pele mohopolo oa NTS o kengoa tšebetsong. Likarolo li ka har'a lipalo tsa 25-ms.

Tlhophiso: 

1. Eya ho Main Menu.
2. Eya ho Debug.
3. Eya ho Edit Parameters.
4. Khetha Fomete ea Decimal.
5. Beha paramente 08-0139.
6. Tsamaisetsa ho le letona ebe o tobetsa Boloka.

08-0118 TSRD Debounce Limit

• Tlhaloso: E beha nako eo koloi e tlamehang ho ba maemong a lebelo a TSRD pele phoso e tšoauoa. Likarolo li ka har'a lipalo tsa 10-ms.

Tlhophiso: 

1. Eya ho Main Menu.
2. Eya ho Debug.
3. Eya ho Edit Parameters.
4. Khetha Fomete ea Decimal.
5. Beha paramente 08-0118.
6. Tsamaisetsa ho le letona ebe o tobetsa Boloka.

08-0158 Relevel Zone Size

Tlhaloso: E beha boholo ba sebaka sa topollo (e tsejoang hape e le " dead zone) ka li-increments tsa 0.02 increments. Ha koloi ea lifti e le ka nqane ho sebaka sena ho tloha sebakeng se haufi se ithutoang (hape se tsejoa e le boemo bo sa feleng), koloi e tla leka ho theoha.

HLOKOMELA: Sebaka se shoeleng ke sebaka se hlalositsoeng ke software haufi le mokatong oa fatše moo koloi ea lifti e emang teng, 'me ka har'a sebaka se shoeleng, koloi e ke ke ea kena ts'ebetsong ea ho khutlisa. Boholo ba libaka bo nyane haholo bo tla baka phello ea yo-yoing, sebaka se seholo haholo se tla sitisa ts'ebetso ea ho tsamaisa koloi mme se lumelle koloi hore e lule e theohile.

Tlhophiso: 

1. Eya ho Main Menu.
2. Eya ho Setup.
3. Eya ho Floors.
4. Kgetha Boholo ba Sebaka sa Relevel.
5. Beha Relevel Zone Size.
6. Tsamaisetsa ho le letona ebe o tobetsa Boloka.

08-0156 Relevel Offset Up 0.5mm
Beha paramethara ena ha ho fuoa taelo ho li-valve hore li emise koloi nakong ea ha koloi e ntse e matha, 'me mochine o hlokomela hore koloi e ema ho feta boemo ba kamehla ha e ntse e nyolohela holimo.

• Tlhaloso: E fokotsa palo ea sebaka seo u eang ho sona ka boleng bo behiloeng ha u atamela mokato ho tloha tlase.
• Boemo: Nahana ka koloi e tsamaeang e lebile holimo. Ha koloi e ema, e ka 'na ea theoha. Ka mor'a ho theoha, boemo ba koloi bo ka 'na ba thunya ka holim'a boemo ba fatše. Haeba overshoot ena e etsahala khafetsa, mochine o tla tlameha ho kenya parameter ea Relevel Offset Up 0.5mm [08-0156] ka ho beha boleng bo lekanang le sebaka se pakeng tsa boemo ba koloi le boemo ba kamehla ba fatše.
• Offset Up [OU] = Boemo ba Koloi Ka mor'a ho Ema - Boemo ba Mokato o sa Feleng=

Tlhophiso:

1. Eya ho Main Menu.
2. Eya ho Setup.
3. Eya ho Hydro.
4. Khetha Relevel Offset Up.
5. Kenya boleng ba offset up.
6. Tsamaisetsa ho le letona ebe o tobetsa Boloka.

08-0157 Relevel Offset Down 0.5mm
Beha paramethara ena ha ho fuoa taelo ho li-valve hore li emise koloi nakong ea ha koloi e ntse e matha, 'me mochine o hlokomela hore koloi e ema ho feta boemo ba kamehla ha e ntse e theohela tlaase.

• Tlhaloso: E eketsa palo ea maemo a holimo ka boleng bo behiloeng ha u atamela mokato ho tsoa holimo.
• Boemo: Nahana ka koloi e eang tlase. Ha koloi e ema, e ka ’na ea theoha. Ka mor'a ho theoha, boemo ba koloi bo ka 'na ba thunya ka tlas'a boemo ba fatše. Haeba overshoot ena e etsahala khafetsa, mochine o tla tlameha ho kenya parameter ea Relevel Offset Down 0.5mm [08-0157] ka ho beha boleng bo lekanang le sebaka se pakeng tsa boemo ba koloi le boemo ba kamehla ba fatše.
• Offset Down [OD] = Boemo ba Mokato o sa Feleng - Boemo ba Koloi Ka mor'a ho Ema

Tlhophiso:

1. Eya ho Main Menu.
2. Eya ho Setup.
3. Eya ho Hydro.
4. Khetha Relevel Offset Down.
5. Kenya boleng ba offset down.
6. Tsamaisetsa ho le letona ebe o tobetsa Boloka.

08-0169 Destination Offset Up 0.5mm
Beha paramethara ena ha ho fuoa taelo ho li-valve hore li emise koloi nakong ea lebelo le tloaelehileng 'me mochini o hlokomela hore koloi e ema ho feta boemo ba kamehla ha e ntse e nyolohela holimo.

• Tlhaloso: E fokotsa palo ea sebaka seo u eang ho sona ka boleng bo behiloeng ha u atamela mokato ho tloha tlase.
• Boemo: Nahana ka koloi nakong ea ho matha ka mokhoa o tloaelehileng le ho tsamaea ho ea holimo. Ha koloi e ema, boemo ba eona bo ka 'na ba thunya ka holim'a fatše. Haeba ho fetella hona ho etsahala khafetsa, mochini o tla tlameha ho kenya paramente ea Destination Offset Up 0.5mm [08-0169] ka ho beha boleng bo lekanang le sebaka se pakeng tsa boemo ba koloi le boemo ba kamehla ba fatše.
• Offset Up [OU] = Boemo ba Koloi Ka mor'a ho Ema - Boemo ba Mokato o sa Feleng

Tlhophiso:

1. Eya ho Main Menu.
2. Eya ho Setup.
3. Eya ho Hydro.
4. Khetha Dest. Offset Up.
5. Kenya boleng ba offset up.
6. Tsamaisetsa ho le letona ebe o tobetsa Boloka.

08-0170 Destination Offset Down 0.5mm
Beha paramethara ena ha ho fuoa taelo ho li-valve hore li emise koloi nakong ea ha koloi e ntse e matha, 'me mochine o hlokomela hore koloi e ema ho feta boemo ba kamehla ha e ntse e theohela tlaase.

• Tlhaloso: E eketsa palo ea sebaka seo u eang ho sona ka boleng bo behiloeng ha u atamela mokato o tsoang holimo.
• Boemo: Nahana ka koloi nakong ea ho matha ka mokhoa o tloaelehileng le ho tsamaea ka tsela e eang tlase. Ha koloi e ema, boemo ba eona bo ka 'na ba thunya ka tlas'a fatše. Haeba ho fetella hona ho etsahala khafetsa, mochini o tla tlameha ho kenya parameter ea Destination Offset Down 0.5mm [08-0170] ka ho beha boleng bo lekanang le sebaka se pakeng tsa boemo ba koloi le boemo ba kamehla ba fatše.
• Offset Down [OD] = Boemo ba Mokato o sa Feleng - Boemo ba Koloi Ka mor'a ho Ema

Tlhophiso:

1. Eya ho Main Menu.
2. Eya ho Setup.
3. Eya ho Hydro.
4. Khetha Dest. Offset Down.
5. Kenya boleng ba offset down.
6. Tsamaisetsa ho le letona ebe o tobetsa Boloka.

32-0007 Valve Disable Bitmap

• Tlhaloso: E nolofalletsa ho tima ka mokhoa o ikhethileng oa li-valve botong e le 'ngoe kapa ho feta nakong ea mekhahlelo e itseng.
• HLOKOMELA: Paramethara ena e fumaneha liphetolelong tsa software 65d0 ho isa morao tjena.
• Scenario I: Sena se na le thuso maemong ao, mohlalaample, valve ea ho leka-lekanya e lokela ho lula e OFF nakong ea lebelo le phahameng la ho matha le ho khetha feela nakong ea sekhahla.
• Boemo II: Sena se boetse sea thusa maemong ao, mohlalaample, mapolanka a eketsehileng a li-valve a hlokahala feela nakong ea leeto le eang holimo, ha pompo e hloka ho phahamisa litšepe tse boima. Nakong ea ho ea tlase, ho ne ho tla sebelisoa feela boto ea li-valve e kholo (ea mantlha).
• HLOKOMELA: Lits'oants'o ha li felle ebile li na le moreki / mosebetsi o ikhethileng e le ho tsamaisana le litšitiso tsena, parameter ea 32-bit (32-0007) "ValvesDisableBitmap" e fanoa ho fa mosebelisi taolo e nepahetseng mabapi le hore na boto e 'ngoe le e' ngoe ea li-valve (Primary, Secondary, joalo-joalo) e sebetsa joang nakong ea ho matha.
• Parameter ena ea 32-bit e arotsoe ka lihlopha tse 4, moo sete e 'ngoe le e' ngoe e laolang boitšoaro ba boto e itseng ea valve. Sehlopha se seng le se seng se entsoe ka likotoana tse 8. Ka ho fetola biti, mochini o ka nolofalletsa kapa oa tima tšebetso ea valve nakong ea mekhahlelo e itseng ea ts'ebetso.
• Ha hanyane e fetotsoe ho tloha ho 0 ho ea ho 1, sena se thusa ho tima ketso e itseng ea valve nakong ea mohato o itseng.
• Ha e bua ka setšoantšo se ka tlase, sete e tlaase ka ho fetisisa (ka ho le letona-ka ho fetisisa) e lumellana le boto ea valve ea 1, sete e latelang e emela boto ea 2 ea valve, 'me e latelang ke ea boto ea 3rd valve. Sehlopha sa ho qetela sa li-bits tse 8 ke tsa valve ea 4.

• Mohato oa 1: Tlosa 0 ka 1 ho tima litaelo tse hlokahalang tsa valve bakeng sa valve 1
• Mohato oa 1a (feela bakeng sa mesebetsi e nang le li-valve board tse fetang bonngoe): Pheta mohato o ka holimo bakeng sa li-valve 2, 3, le 4, haeba li le teng.
• Mohato oa 2: Fetolela ho tloha ho Binary ho ea ho DEC kapa HEX
• Mohato oa 3: Boloka nomoro ho Parameter 32-0007

Sehlopha se seng le se seng se arotsoe ka likarolo tse peli tsa li-bits tse 4 - karoloana e le 'ngoe bakeng sa mohato oa lebelo le phahameng le e' ngoe bakeng sa mohato oa boemo. Li-subsets tsena li arotsoe ka valve ea lebelo le phahameng le lebelo la lebelo. E 'ngoe le e' ngoe ea Valve, ebang ke ea High UP, High DN, Level UP, kapa Level DN, e emeloa ke li-bits tse 2 - e 'ngoe bakeng sa tataiso ea Holimo le e' ngoe bakeng sa tataiso ea Down.

Example ke: Nahana ka karolo ea pele ea tsamaiso ea tsamaiso. Ho fetola karolo ea pele ho tloha ho 0 ho ea ho 1 sebakeng sena ho tla thibela boto ea li-valve e ka sehloohong (valve 1) ho khetha valve ea boemo nakong ea mohato oa ho lekanya ha mohala o behoa ka lehlakoreng le tlaase. Boemo bona ha bo utloahale, kaha bo ka etsa hore koloi e lule e eme nakong ea boemo bo holimo. Ho beha karolo ea bobeli ho 1 ho tla ba le phello e tšoanang.

Example II: Ho fetola boleng bo itseng maemong a 6, 14, le 22 ho tloha ho 0 ho isa ho 1, ho tla bolela hore Valve 1, Valve 2, le Valve 3 li ke ke tsa khetha / ho kenya valve ea ho lekanya ha mohala oa koloi o behoa holimo nakong ea lebelo le phahameng. Tabeng ena, li-valve tsa lebelo le phahameng feela li tla sebelisoa nakong ea lebelo le phahameng la ho matha ho ea holimo, ebe o fetela ho li-valve tsa boemo nakong ea mohato oa ho lekana. Ka lehlakoreng le tlase, li-valve tse peli tse lebelo le holimo li tla khetha nakong ea lebelo le phahameng.

Tafole e ka tlase e hlahisa tse ling tsa linyeoe tse atileng haholo tse nang le boleng ba tsona ba paramethara ho liforomo tsa decimal le tsa hexadecimal.

Nyeoe	Tlhaloso ea Nyeoe	DEC	HEX
	E 'ngoe - Sisteme ea Valve
Tlosa Leveling Valve nakong ea High Speed ​​Down	Ha koloi e theoha, ke feela valve e lebelo le phahameng e tla khetha nakong ea lebelo le phahameng, joale valve ea ho leka-lekanya e tla khetha nakong ea sekhahla. Ha u nyoloha, li-valve tse peli tse lebelo le holimo li tla khetha nakong ea boemo bo phahameng, ebe valve ea boemo bo tla khetha. nakong ea mohato oa ho leka-lekanya.	16	x10

Tlosa Leveling Valve nakong ea High Speed ​​Up	Ha koloi e ntse e nyoloha, ke feela valve e lebelo le phahameng e tla khetha nakong ea lebelo le phahameng, joale valve ea ho leka-lekanya e tla khetha nakong ea sekhahla. Ha u theoha, li-valve tse peli tse lebelo le holimo li tla khetha nakong ea boemo bo phahameng, joale valve ea ho leka-lekanya e tla khetha nakong ea sekhahla.	32	x20
Tlosa Leveling Valve nakong ea High Speed ​​​​Down le High Speed ​​Up	Ha koloi e ntse e nyoloha kapa e theoha, ke feela valve ea lebelo le phahameng e tla khetha nakong ea mekhahlelo e phahameng, joale valve ea ho leka-lekanya e tla khetha nakong ea mekhahlelo ea boemo.	48	x30
	Tse peli - Sisteme ea Valve
Tlosa Li-valve tsa Leveling nakong ea High Speed ​​​​Down	Ha koloi e theoha, li-valve tsa lebelo le phahameng feela li tla khetha nakong ea lebelo le phahameng, joale li-valve tsa ho leka-lekanya li tla khetha nakong ea sekhahla. Ha u nyoloha, li-valve tse peli tse lebelo le holimo li tla khetha nakong ea boemo bo phahameng, joale li-valve tsa boemo bo tla khetha nakong ea mohato oa ho lekana.	4112	x1010
Tlosa Li-valve tsa Leveling nakong ea High Speed ​​Up	Ha koloi e ntse e nyoloha, ke li-valve tsa lebelo le phahameng feela tse tla khetha nakong ea lebelo le phahameng, joale li-valve tsa ho leka-lekanya li tla khetha nakong ea sekhahla. Ha u theoha, li-valve tse peli tse lebelo le holimo li tla khetha nakong ea boemo bo phahameng, joale li-valve tsa boemo bo botle li tla khetha nakong ea mohato oa ho lekana.	8224	x2020
Tlosa Li-valve tsa Leveling nakong ea High Speed ​​​​Down le High Speed ​​Up	Ha koloi e ntse e nyoloha kapa e theoha, li-valve tsa lebelo le phahameng feela li tla khetha nakong ea mekhahlelo e phahameng, joale li-valve tsa ho lekanya li tla khetha nakong ea mekhahlelo.	12336	x3030
Tlosa Valve ea Sekondari e Phahameng ka ho Fetisisa nakong ea High Speed ​​​​Down	Ha koloi e nyoloha, valve ea pele le ea bobeli liboto li tla khetha / kenya tšebetsong li-valve tsa lebelo le phahameng nakong ea lebelo le phahameng. Ha o theoha, ke boto ea li-valve tsa mantlha feela e tla pick/activate) valve ea lebelo le phahameng nakong ea lebelo le phahameng. Ka bobeli liboto li tla khetha valve ea ho lekanya nakong ea ho ea holimo le tlase.	16384	x4000

Tlhophiso: 

1. Eya ho Main Menu.
2. Eya ho Debug.
3. Eya ho Edit parameter.
4. Khetha Decimal Format kapa Hex Format.
5. Beha paramente 32-0007.
6. Tsamaisetsa ho le letona ebe o tobetsa Boloka.

E khothalelitsoeng Mohato ka Mohato bakeng sa Liparamente tse Amanang le Litokiso tsa Mokatong
Latela mehato ena ka tatellano e nepahetseng ha u hlophisa liparamente tse amanang le litokiso tsa fatše:

1. Thibela mokhoa oa Adaptive Slowdown™ (US Patent Pending):
   Pele o Ithuta Hoistway le ho Hlahisa Speeds and Threshold, etsa bonnete ba hore Adaptive Slowdown™ system (US Patent Pending) e behiloe HO TOMA:
   1. Eya ho Main Menu.
   2. Eya ho Setup.
   3. Eya ho Hydro.
   4. Eya ho Adaptive Slowdown™ system (US Patent Pending).
   5. Khetha Numella ho lieha.
   6. Beha ho OFF.
   7. Tsamaisetsa ho le letona ebe o tobetsa Boloka.
2. Ithute Hoistway:
   Ts'ebetso ena e lokela ho etsoa ka lebelo le sa feteng 25 FPM.
   1. Tlisa koloi mokatong o ka holimo kapa o ka tlaase
   2. Sheba hore na tlhahiso ea DZ ho CT board e phahame ka ho hlahloba ka holimo ka ho le letona la skrine se seholo kapa ka viewho kenya dimenu tsa maemo
   3. Holima MR board, bulela DIP A5
   4. Skrine se seholo se lokela ho fetoha ho tloha ho Tloaelehileng ho ea ho Hold UP/DN Ho Qala
   5. Ho latela sebaka sa koloi:
      • Haeba koloi e fihla holimo, tšoara likonopo tsa Enable le Down ho fihlela koloi e qala ho tsamaea.
      • Haeba koloi e le tlase, tšoara likonopo tsa Enable and Up ho fihlela koloi e qala ho tsamaea.
   6. Ha koloi e ema, skrine e bontša Ithute ka ho Felletseng.
   7. Holima MR board, tima DIP A5.
3. Hlahisa Mabelo le Maemo:
   1. Eya ho Main Menu.
   2. Eya ho Setup.
   3. Eya ho Hydro.
   4. Eya ho Hydro Speed ​​​​Setup.
   5. Khetha Gen Thrshlds & Dist.
   6. Kgetha E.
4. Numella sistimi ea Adaptive Slowdown™ (US Patent Pending) 'me u Mathe Koloi:
   1. Latela mehato ea 1-5 ho tloha karolong ea I.
   2. Beha ho ON.
   3. Tsamaisetsa ho le letona ebe o tobetsa Boloka.
   4. Matha koloi ka lebelo le phahameng bonyane makhetlo a 12.
   5. HLOKOMELA: Nakong ea ho matha tsena, koloi e ka 'na ea thunya ka holimo kapa ka tlas'a boemo bo tloaelehileng ba mokatong. Ho fetella hona ho lokela ho fokotseha butle butle ha tsamaiso e ntse e tsitsa.
5. Fetola Maemo a Mabato:
   • A. Koloi e phahame haholo/ E tlase haholo
     • Koloi e ka ema e le tlase haholo kapa e phahame haholo ho tloha fatše.
     • Haeba koloi e ema pele ho sebaka sa fatše, eketsa sebaka ka tekanyo eo koloi e lokelang ho nyoloha ka eona.
     • Haeba koloi e ema ka holimo ho mokatong oa fatše, fokotsa sebaka seo koloi e se hlokang ho theoha. TLHOKOMELISO: Phetoho ena e lokela ho etsoa ka lehlakoreng le le leng feela - ebang ke holimo kapa tlase - moo ho bonoa. Ka lebaka leo, offset e tla lokisoa ka tsela e le 'ngoe.
       1. Tsamaea ho Main Menu | Seta | Mabato.
       2. Ho tsoa ho menu ea Floors, tsamaisa ebe u khetha Ho Holimo Haholo/ Ho Tlase Haholo.
       3. Haeba koloi e ema haholo kapa e phahame haholo:
          1. Haeba koloi e ema tlase haholo, e ea mohato oa 4.
          2. Haeba koloi e ema holimo haholo, e-ea mohatong oa 5.
       4. Ho tsoa ho "Adjust Floors" menu, lokisa sebaka sa ho emisa hore koloi e eme hantle fatše. Bakeng sa mohlalaample, haeba koloi e ema 1.5"-2" ka tlase ho boemo ba fatše, eketsa sebaka seo ho ea sebakeng se ithutoang. E-ea mohatong oa 6.
       5. Ho tsoa ho "Adjust Floors" menu, lokisa sebaka sa ho emisa hore koloi e eme hantle fatše. Bakeng sa mohlalaample, haeba koloi e ema 1.5"-2" ka holim'a boemo ba fatše, tlosa sebaka seo ho ea sebakeng se ithutoang.
       6. Tsamaisetsa ho le letona ebe o tobetsa Boloka.
   • B. Boemo ba Phato ea Lebenkele
     The Store Floor Level e boloka boemo ba boemo ba fatše.
     1. Tsamaea ho Main Menu | Seta | Mabato.
     2. Ho tsoa ho menu ea Floors, tsamaisa ebe u khetha Store Floor Level.
     3. Ho tsoa ho Store Floors menu, tsamaisa ebe u khetha boemo ba fatše bo ntseng bo fetoloa.
     4. Tsamaisetsa ho le letona ebe o tobetsa Boloka.
   • C. Relevel Offset Up/Down & Destination Offset Up/Down
     Sheba likarolo tsa 7 [08-0156 Relevel Offset Up 0.5mm] / 8 [08-0157 Relevel Offset Down 0.5mm] & 9 [08-0169 Destination Offset Up 0.5mm] / 10 [08-0170 Destination Offset Down 0.5mm].
6. Fetola NTS/TSRD:
   Sheba likarolo tsa 3 [08-0128 TSRD Offset From NTS], 4 [08-0139 NTS Debounce], le 5 [08-0118 TSRD Debounce Limit].

2024 © Smartrise Engineering, Inc. Litokelo Tsohle Li Sirelelitsoe

FAQS

P: A na nka fetola boholo ba sebaka sa releveling?
A: Ee, o ka beha boholo ba sebaka sa relevel ka ho latela mehato e fanoeng bakeng sa paramente 08-0158.

Litokomane / Lisebelisoa

SMARTRISE Hydro: Evolved Smartrise Hydraulic Controller [pdf] Bukana ea Mosebelisi 08-0024, 08-0038, 08-0128, Hydro Evolved Smartrise Hydraulic Controller, Hydro Evolved, Smartrise Hydraulic Controller, Hydraulic Controller, Controller

Litšupiso

• Bukana ea Mosebelisi