SIM LAB SD43 Dash LED Display
PELE O QALANG
Kea leboha ha u rekile. Bukeng ena re tla u fa mekhoa ea ho qala ho sebelisa dash ea hau e ncha!
Dash SD43 LED
Likaroloana:
4.3" 480×272 Pixel mmala TFT LCD USBD 480
23 li-leds tsa RGB tse felletseng
Ho fihlela ho 60 FPS
16 bit Mebala
USB Powered
Likhetho tse ngata tsa software
Bakhanni ba kenyelelitsoe
Ho kenya dash ho bonolo haholo ka lebaka la mounting plate e kenyellelitsoeng. Ka liboutu tse 2 feela (A5) u ka e beha ka kotloloho setsing sa hau sa Fanatec. Bakeng sa ho hloella holim'a thaba ea servo u ka sebelisa liboutu tse teng tseo servo e kenngoeng ka tsona thabeng e ka pele kapa sets'oants'o sa enjene ea servo.
Ho phahamisa lebelo
Ho khona ho kenya dash ho hardware ea khetho ea hau, re fana ka lipoleiti tsa adaptara. Eo u nang le eona e tla itšetleha ka theko ea hau 'me e ka fapana le e latelang eo re e bontšang.
OSW/Simucube/VRS
Lokolla liboutu tse teng tse kaholimo tse ts'oereng enjene. Tlosa poleiti ea adaptara holim'a khoele e pepesitsoeng ebe u tiisa liboutu khahlano le poleiti.
Hlokomela: poleiti ea adaptara bakeng sa Simucube Ultimate e rekisoa ka thoko
Fanatec DD1/DD2/CSL
Fumana masoba a kenyellelitsoeng ho Hardware ea hau ea Fanatec 'me u sebelise liboutu tse peli (A4) le li-washer (A6) tse tsoang ho lisebelisoa tsa rona tse fanoeng.
Fanatec CSW
Leha poleiti ea kamehla ea Fanatec e ka kengoa, re khetha ena hobane e theola lebelo ho tsoa lebiling la setereng.
Hlokomela: Letlapa lena le rekisoa ka thoko
Ho kenya bakhanni
Ho etsa hore ponts'o e be karolo ea dash e sebetsang, ho hlokahala bakhanni ba khethehileng. Bakhanni ba ka khoasolloa leqepheng la sehlahisoa.
> jarolla bakhanni
Ho kenya
Ho kenya li-driver tsa ponts'o, tsamaisa sephutheloana se jarollotsoeng 'me u latele mehato ena:
Tobetsa 'E latelang'.
Hlalosa sebaka sa ho kenya li-driver:
Tobetsa 'Install'.
Ka mor'a hore sebaka sa ho laela se tletse 'me se re 'E phethiloe':
Tobetsa 'Koala'. Ho kengoa li-driver tsa ponts'o ho se ho entsoe.
Ho kenya SimHub
Ho laola li-LED tsa dash, Simhub e ka sebelisoa.
Khoasolla mofuta oa morao-rao oa Simhub ho tsoa ho https://simhubdash.com
Ho kenya
Unzip e jarollotsoeng file ebe o tsamaisa setup file:
Tobetsa 'E latelang'.
Hlalosa sebaka sa ho kenya software:
Tobetsa 'E latelang'.
Etsa bonnete ba hore likhetho tsohle li khethiloe:
Tobetsa 'E latelang'.
Tobetsa 'Install'.
Ka mor'a ho kenya, tobetsa 'Finish'.
SimHub tlhophiso
Haeba ha u so hokela dash le thapo ea USB eo u e filoeng komporong ea hau, sena sea hlokahala ho tloha ntlheng ena ho ea pele.
Tshebetso
Ho sebelisa ponts'o ka SimHub, e hloka ho lumelloa:
Tobetsa 'Dash Studio' (1).
Tobetsa 'USBD480' (2).
Karolong ea 'Screen #1', hlahloba 'Enable display' (3). Letshwao la 'Hoketswe' le tla hlaha ka letsohong la lona le letona. Ha skrini se hoketsoe, khutlela ho 'Dashboards' (4).
Tsamaea holim'a dashboard eo u batlang ho e hlahisa ebe u khetha 'Qala'.
Ho tla hlaha popup, khetha 'Ho skrineng sa USBD480' (6).
Pontšo joale e tla qala ho sebelisa dash e khethiloeng.
HLOKOMELA: Ho kenya kapa ho fetola dash profiles ha se karolo ea tokomane ena. Bakeng sa tlhaiso-leseling e batsi ka taba eo, ka kopo bona litokomane tsa Sim Hub.
Ho laola li-LED
A sample LED profile e ka kopitsoa leqepheng la sehlahisoa.
> jarolla led profile <
Ho nolofalletsa kapa ho lokisa li-LED, khutlela leqepheng la 'USBD480' ho 'Dash Studio'. U ka boela ua sheba leqepheng la 5/6 la tokomane ena.
Sheba mojule oa 'SIMLAB DASH 2.0' (1). Ho tla hlaha sesupo sa 'Hoketsoe' ho netefatsa khokahano. Tobetsa 'Profiles manager' (2) ho kenya profile.
Tobetsa ho import profile letšoao (3).
Batla sebakeng seo u bolokileng LED profile, e khethe ebe o tobetsa 'Open'.
Mojaro oa profile, etsa bonnete ba hore e khethiloe (SD43-LED) ebe o tobetsa 'Moroalo' (4).
Ho fetola mesebetsi ea li-LED.
Ho fetola litlamorao tsa LED o hloka ho tseba linomoro tsa LED tsa dash. Linomoro li qala ka tlaase ka ho le letšehali 'me li tsoela pele ho ea tlaase ho le letona. Sheba setšoantšo se ka tlase bakeng sa litšupiso:
Ho lokela ho ba le lintlha tse lekaneng ho sampKea tsebafile ho kgona ho ikamahanya le seo o se ratang. Hopola feela, hangata o hloka litekanyetso tse peli. Palo ea LED moo u batlang hore phello e qale, le palo ea li-LED tse lokelang ho sebelisoa bakeng sa phello e boletsoeng (ka tsela ea clockwise).
Bakeng sa thuso e eketsehileng le tlhaiso-leseling e batsi ka litlamorao, ka kopo bona litokomane tsa SimHub.
Bili ea thepa
LIEKETSENG LEKOSI
| # | Karolo | QTY | Hlokomela |
| A1 | Setšoantšo sa SD43-LED | 1 | |
| A2 | Cable ea USB B | 1 | |
| A3 | Adapter plate Fanatic's | 1 | E lumellana le lisebelisoa tsohle tsa Fanatic. |
| A4 | Adapter ea OSW/SC/VRS | 1 | |
| A5 | Bolt M6 X 10 DIN 912 | 2 | E sebelisoa le Fanatic's. |
| A6 | Bolt M5 X 10 DIN 7380 | 4 | Ho kopanya poleiti ea adaptara ho dash. |
| A7 | Hlatsoa M6 DIN 125-A | 4 | |
| A8 | Hlatsoa M5 DIN 125-A | 4 | |
| Boitlhaloso: bakeng sa likenyelletso tse ling lethathamong lena, re fana ka tse fetang tse hlokahalang e le lisebelisoa tse ling. Seke oa tšoenyeha haeba u na le lijo tse setseng, sena ke ka boomo. | |||
TŠEBELETSO BAKENGI
Haeba u ntse u e-na le lipotso mabapi le ho bokelloa ha sehlahisoa sena kapa ka bukana ka boeona,
ka kopo sheba lefapha la rona la ts'ehetso. Li ka finyelloa ho
support@sim-lab.eu
Ntle le moo, joale re na le seva sa Discord moo ho nang le Sim-Lab e nang le boiphihlelo
bareki ba fanyeha. Ba ka 'na ba u thusa ha u ka ba botsa hantle 😉
Haeba u batla ho hatisa bukana ena, ka kopo nahana ka tikoloho pele u etsa joalo. Bakeng sa molemo ka ho fetisisa
liphetho, etsa bonnete ba hore u hatisa ka tekanyo ea 100% ntle le meeli.
Leqephe la sehlahisoa ho Sim-Lab websebaka:
Litokomane / Lisebelisoa
 |
SIM LAB SD43 Dash LED Display [pdf] Buka ea Taelo SD43 Dash LED Display, SD43, Dash LED Display, LED Display, Display |
