SignalFire 960-0052-01 Analog Relay Output Module
Tlhahisoleseding ya Sehlahiswa
| Lebitso la Sehlahiswa | Analog Output Module |
|---|---|
| Nomoro ea Mollo oa Signal | Analog Output Module Manual |
| Likaroloana |
|
Litaelo tsa Tšebeliso ea Sehlahisoa
Lihokelo:
| Mobala oa Mohala | Khokahano |
|---|---|
| KHIBIDUDU | Matla a Matle (10 ho isa ho 30 VDC) |
| TŠOANE | Fatše |
| MONAHANA | RS-485 |
| BOTSOOA | RS-485 |
| NAMUNU | RS-232 Debug/Programming TX, 9600 Baud |
| TŠEHLA | RS-232 Debug/Programming RX, 9600 Baud |
Hlokomela: Bakeng sa DIN Gateway, ke lithapo tse Ntšo le Orange feela tse hlokang ho hokeloa ho litheminale tsa Output Module ho Gateway.
Litlhoko tsa Matla:
- Matla a tlameha ho fanoa ke li-screw terminals tsa Power Input (10-30VDC).
- Litlhoko tsa matla a Mojule ho 12VDC ke boholo ba 17mA hammoho le karolelano ea 25mA bakeng sa Gateway e khomaretsoeng.
- Haeba liphetho life kapa life li sebelisoa e le liphetho tsa hajoale, 20mA e tlameha ho ba teng bakeng sa tlhahiso e 'ngoe le e 'ngoe ea hajoale e sebelisoang.
Ho hokahanya Li-module tse ling:
Ho hokela mojule oa bobeli bakeng sa liphetho tse ling, sebelisa thapo ea katoloso e fanoeng ebe o hokela mojule oa bobeli ho oa pele. Mojule oa bobeli o tlameha ho ba le jumper e kentsoeng holim'a lithakhisa tsa SLAVE haufi le sehokelo sa ho atolosa.
Boemo ba LED:
| Tlhaloso ea LED | Boemo |
|---|---|
| Slow Flash (khefutso ea metsotsoana e 3) | Sistimi ea sebetsa mme bonyane node e le 'ngoe e hole e kopantswe. |
| Fast Flash (khutso ea metsotsoana e 0.5) | Sistimi ea sebetsa empa ha ho na li-node tse hole tse hokahaneng. |
| E tiile On | Ha ho puisano le Gateway |
Tlhophiso:
Ho qala tlhophiso, bula SignalFire Toolkit. Sesebelisoa sa SignalFire Toolkit se ka khoasolloa ho www.signal-fire.com/customer. Ka mor'a ho instola tse, qala software le ka sehloohong toolkit fensetere tla bula. Khetha boema-kepe ba COM bo amanang le GW ebe o tobetsa Auto-Detect Device ho COM Port. Sena se tla bula fensetere ea tlhophiso ea Gateway, moo litlhophiso tsohle tsa lisebelisoa li ka hlophisoang.
Lihokelo tsa Mojule oa Analog/Relay Output:
| Mobala oa Mohala | Khokahano |
|---|---|
| KHIBIDUDU | Matla a Matle |
| TŠOANE | Fatše |
| MONAHANA | RS485 |
| BOTSOOA | RS485 |
| NAMUNU | RS-232 Debug/Programming TX |
| TŠEHLA | RS-232 Debug/Programming RX |
Hlokomela: Matla a tlameha ho fanoa ke li-screw terminal tsa Power Input (10-30VDC). Litlhoko tsa matla a Mojule ho 12VDC ke boholo ba 17mA hammoho le karolelano ea 25mA bakeng sa thupa ea Gateway. Ho feta moo, haeba liphetho li sebelisoa e le liphetho tsa hajoale, 20mA e tlameha ho ba teng bakeng sa tlhahiso ka 'ngoe e sebelisoang hajoale.
Li-terminals tsa RS485 li fana ka phihlello ea sebopeho sa Gateway Modbus bakeng sa khokahanyo e 'ngoe ea data ho Gateway.
SignalFire Analog/Relay Output Module e na le lintlha tse latelang:
- Liphetho tse 8 tsa Analog (0-20mA kapa 0-5V)
- 2 Liphetho tsa Digital Relay
- Phatlalatso e pharaletseng ea matla a DC. 10 ho isa ho 30 VDC
- Tlhophiso e bonolo ka SignalFire ToolKit
- Sehokelo sa katoloso ho hokela mojule oa bobeli oa tlhahiso
- Thaba ea Terene ea DIN
- Boemo ba LED
- DB9 sehokelo bakeng sa kgokelo ya ToolKit ho Gateway
Litlhaloso
- Matla: 10-30 VDC (17mA + analoge e hlahisoang hajoale)
- Mocheso Rating: -40°C ho ea ho +85°C
- Relay Outputs: 2 DPDT e fetisetsa 30
- VDC @ 2 Amps 250
- VAC @ 0.25 Am
Litekanyo
SignalFire Telemetry
Lihokelo
Mojule ona o fana ka li-screw terminals bakeng sa khokahano ho SignalFire Gateway. Hokela lithapo tse 6 ho thupa ea Gateway ho latela mebala e ngotsoeng. Bakeng sa DIN Gateway ke lithapo tse Ntšo le Orange feela tse hlokahalang ho hokeloa ho litheminale tsa Output Module ho Gateway.
| Mobala oa Mohala | Khokahano |
| KHIBIDUDU | Matla a Matle (10 ho isa ho 30 VDC) |
| TŠOANE | Fatše |
| MONAHANA | RS-485 |
| BOTSOOA | RS-485 |
| NAMUNU | RS-232 Debug/Programming TX, 9600 Baud |
| TŠEHLA | RS-232 Debug/Programming RX, 9600 Baud |
Matla a tlameha ho fanoa ke li-screw terminal tsa Power Input (10-30VDC). Litlhoko tsa matla a Mojule ho 12VDC ke boholo ba 17mA hammoho le karolelano ea 25mA bakeng sa Gateway e khomaretsoeng. Sena ha se kenyelle ea hajoale ho tsamaisa liphetho tsa analoge tse hlophisitsoeng.
Li-terminals tsa RS485 li fana ka phihlello ea Gateway bakeng sa puisano ea Modbus ho tsoa ho RTU.
Ho hokela mojule oa bobeli bakeng sa liphetho tse ling, sebelisa thapo ea katoloso e fanoeng ebe o hokela mojule oa bobeli ho oa pele. Mojule oa bobeli o tlameha ho ba le jumper e kentsoeng holim'a lithapo tsa "SLAVE" haufi le sehokelo sa ho atolosa.
Boemo ba LED
Mojule o na le LED e le 'ngoe e tala e fumanehang bakeng sa tlhahlobo ea puisano. Ho feta moo, ho na le LED e tala haufi le sehlahisoa se seng le se seng se bulelang ha tlhahiso e ntse e matlafatsoa.
| LED | Tlhaloso |
| Slow Flash (khefutso ea metsotsoana e 3) | Sistimi ea sebetsa 'me bonyane node e le 'ngoe e hole e hokahane. |
| Fast Flash (khutso ea metsotsoana e 0.5) | Sistimi ea sebetsa empa ha ho na li-node tse hole tse hokahaneng. |
| E tiile On | Ha ho puisano le Gateway |
Tlhophiso
Ho qala tlhophiso, bula SignalFire Toolkit. Sesebelisoa sa SignalFire Toolkit se ka khoasolloa ho www.signal-fire.com/customer. Ka mor'a ho kenya, qala software 'me fensetere e ka sehloohong ea lisebelisoa e tla buleha:
Khetha boema-kepe ba COM bo amanang le GW ebe o tobetsa "Auto-Detect Device on COM Port." Sena se tla bula fensetere ea tlhophiso ea Gateway, moo litlhophiso tsohle tsa lisebelisoa li ka hlophisoang.
Mojule o hloka tlhophiso e bonolo feela o sebelisa SignalFire ToolKit ho etsa 'mapa oa data e hole ho sehlahisoa se fanoeng
Lihokelo tsa Mojule oa Analog/Relay Output
Mojule oa Analog/Relay o fana ka li-screw terminals bakeng sa khokahano ho SignalFire Gateway Stick. Hokela lithapo tse 6 ho thupa ea Gateway ho latela mebala e ngotsoeng.
| Mobala oa Mohala | Khokahano |
| KHIBIDUDU | Matla a Matle |
| TŠOANE | Fatše |
| MONAHANA | RS485 |
| BOTSOOA | RS485 |
| NAMUNU | RS-232 Debug/Programming TX |
| TŠEHLA | RS-232 Debug/Programming RX |
Matla a tlameha ho fanoa ke li-screw terminal tsa Power Input (10-30VDC). Litlhoko tsa matla a Mojule ho 12VDC ho 17mA hammoho le karolelano ea 25mA bakeng sa thupa ea Gateway. Ho feta moo, haeba liphetho li sebelisoa e le liphetho tsa hajoale, 20mA e tlameha ho ba teng bakeng sa tlhahiso ka 'ngoe e sebelisoang hajoale.
Li-terminals tsa RS485 li fana ka phihlello ea sebopeho sa Gateway Modbus bakeng sa khokahanyo e 'ngoe ea data ho Gateway.
Ho hokela mojule oa bobeli bakeng sa liphetho tse ling, sebelisa feela thapo ea katoloso e fanoeng ebe o hokela mojule oa bobeli ho oa pele. Mojule oa bobeli o tlameha ho ba le jumper e kentsoeng holim'a lithapo tsa "SLAVE" haufi le sehokelo sa ho atolosa. Mojulung oa bobeli, ho ka sebelisoa feela lihlahisoa tse peli tsa analog le lihokelo tse peli tsa relay.
Maemo a li-LED
Mojule oa tlhahiso ea Analog / Relay o na le LED e le 'ngoe e tala e fumanehang bakeng sa tlhahlobo ea puisano.
| Boemo ba LED | Tlhaloso |
| Slow Flash (khefutso ea metsotsoana e 3) | Sistimi e sebetsa bonyane node e le 'ngoe e hole e hoketsoeng. |
| Fast Flash (khutso ea metsotsoana e 1) | Sistimi ea sebetsa empa ha ho na li-node tse hole tse hokahaneng |
| E tiile On | Ha ho puisano le Gateway |
Ho feta moo, ho na le LED e tala haufi le sehlahisoa se seng le se seng sa relay se bulelang ha relay e ntse e matlafatsoa.
Tshebetso
The SignalFire Analog / Relay output module e hokahane le Gateway. Gateway e lokiselitsoe ho etsa 'mapa oa lintlha tsa node ho liphetho tsa analog. Ha node e tlaleha boleng bo ntlafalitsoeng hekeng sephetho se hlophisitsoeng se tla bonts'a boleng boo. Litlhophiso tsohle li bolokiloe ho Gateway
Haeba linako tse ling tsa node ka ntle ho heke tlhahiso ea analog e tla hlōleha boleng ba ho hlōleha bo hlophisitsoeng esale pele (boleng ba ho hlōleha ha kamehla ke 0).
Ntle le moo, haeba mojule oa analog/relay output o emisa ho fumana lintlafatso ho tsoa hekeng ka metsotso e 5, liphetho tsohle li tla beoa ho 0 'me li-relay ka bobeli li tla fokotsa matla.
Mojule oa tlhahiso ea Analog / Relay o hloka feela tlhophiso e bonolo ho sebelisa SignalFire ToolKit ho etsa 'mapa / ho lekanya data e hole ho sehlahisoa se fanoeng. Liphetho tsa analog li ka sebetsa ho ea hajoale (0-20mA/4-20mA), kapa vol.tage (0-5V/1-5V). Mokhoa oa tlhahiso o tlameha ho behoa ke li-slide switches ka hare ho module.Ho etsa sena pele tlosa sekoahelo u sebelisa screwdriver e nyenyane ea flathead, sekoahelo se tšoaroa ka likotoana. 
Sesebelisoa se seng le se seng se laola para ea liphetho. Bakeng sa mohlalaample, switjha ho ea ka letsohong le letšehali (S1) e beha tlhahiso ea 1 le tlhahiso ea 2 ho mA kapa Volts. Sheba tafole e ka tlase bakeng sa 'mapa oa switjha.
| Fetoha | Litholoana |
| S1 | 1 le 2 |
| S2 | 3 le 4 |
| S3 | 5 le 6 |
| S4 | 7 le 8 |
Ho lokisa liphetho tsa Analog/Relay ho SignalFire ToolKit qala ka ho hokela boema-kepeng ba DB9 ba mojule o hokelang thupa ea Gateway ho PC ea hau. Bula ToolKit ebe o hokela hekeng.
Ka fensetere ea tlhophiso ea Gateway, ea ho '.File'me u khethe' Analog / Relay Output Module '. Sena se tla bula fensetere ea litlhophiso ka tlase
Bakeng sa sephetho se seng le se seng, molao oa ho laola tlhahiso eo o tlameha ho hlalosoa. Bakeng sa mohlalaample, fensetereng ea tlhophiso e kaholimo ho tlhahiso ea analog 1 e hlalosoa e laoloa ke Modbus ID 1 e leng sebaka sa mohloli oa Sentinel-Analog. Registara ea A 3001 e khethiloe. Rejisetara ena e ea lekanngoa e le hore 4000uA e lekana le tlhahiso ea 4mA le 20000uA e lekanang le tlhahiso ea 20mA. Ho feta moo, 'Fail with Output Value' e behiloe ho 3.5mA. Kholomo ea boleng ba rejisetara ea hajoale e bonts'a boleng ba morao-rao ba ngoliso eo heke e nang le eona bakeng sa node/register e hlalositsoeng. Ho tobetsa konopo ea "refresh" ho tla ntlafatsa boleng ba ngoliso ea hajoale. Ka mor'a ho lokisa leha e le efe ea melao, tobetsa 'Ngola Litlhophiso tsa Output to Gateway' ho boloka melao hekeng. Melao leha e le efe e sa hlalosoang (Mofuta oa Node o behiloeng ho 'none') o tla etsa hore liteishene tseo li behoe ho 0.
Litlamorao tsa Nako ea Nakoana
Hoa khoneha ho fetisa tlhahiso ea nakoana ho boleng bo hlalositsoeng bakeng sa tlhahlobo. Botlaaseng ba fensetere khetha feela dipholo kanale ho override, kenya override boleng le tobetsa ea 'Set Output' konopo. Sena se tla qobella mocha oa tlhahiso o khethiloeng ho boleng bo behiloeng bakeng sa metsotso e 5 kapa ho fihlela konopo ea 'Clear Output Overrides' e hatelloa. Sena se na le thuso bakeng sa tlhahlobo. Ela hloko hore kanale e tla totobatsoa ka mosehla ha phetoho e ntse e sebetsa.
Remote Shutdown Settings
Ntle le litlhophiso tsa module ea Analog / Relay Output, li-relay tse peli li ka laoloa ka boikhethelo ho sebelisa tafole ea Gateway RSD. Ho tsoa fensetereng ea tlhophiso ea Gateway, khetha 'Litlhophiso> Litlhophiso tsa Remote Shutdown' holim'a toolbar. Sena se tla bula fensetere ea litlhophiso ka tlase. Taolo ea relay e lokela ho hlophisoa ho li-module tsa Analog/Relay Output KAPA tafole ea RSD eseng ka bobeli. Bakeng sa tlhahiso ka 'ngoe, hlalosa molao o le mong kapa ho feta ho fetola tlhahiso ea analog. Hlophisa molao o mong le o mong ho tloha ho le letšehali ho ea ho le letona, ho qala ka mohloli oa mohloli oo u ka ratang ho laola tlhahiso, joale mohopolo oa ho bulela le ho tima, ebe sephetho se reriloeng. Ho sebelisa liphetho tsa mojule oa Analog Output "ID ea Lekhoba la Sebaka" e tlameha ho hlophisoa ho ID ea Makhoba ea Gateway eo e leng 247 ka ho sa feleng. Bakeng sa mohlalaample, fensetereng ea tlhophiso e kaholimo, Relay 1 ho Analog Output Module 1 e tla bulela ha tlhahiso ea analoge ea ID 1 e kaholimo ho 9000uA (9mA) mme e tima ha tlhahiso ea analoge e theoha ka tlase ho 8000uA (8mA). Phapang ea 1000uA ke ho thibela tlhahiso hore e se ke ea bulela le ho tima khafetsa haeba tlhahiso ea analoge e le sebakeng sa 9000uA. Ha output e hlalosoa ke mehloli e mengata, e tla bulela feela haeba maemo ohle a eona a Energize a fihletsoe. Leha ho le joalo, hang ha e bulela, e tla tima haeba leha e le efe ea maemo a eona a De-Energize e finyelloa. Ka mantsoe a mang, maemo a Energize ke Boolean LE logic, athe De-Energize condition are Boolean OR logic. Kamora ho lokisa leha e le efe ea melao, tobetsa ho 'Ngola Output Settings to Gateway' ho boloka liphetoho hekeng. Haeba Analog Output Module e lahleheloa ke puisano ea terata le Gateway, e tla tima liphetho tsohle kamora metsotso e 5. Bakeng sa tlhaiso-leseling e batsi ka Window ea Remote Shutdown, ka kopo bona bukana ea Gateway.
Litokomane / Lisebelisoa
 |
SignalFire 960-0052-01 Analog Relay Output Module [pdf] Tlhophiso Tataiso 960-0052-01 Analog Relay Output Module, 960-0052-01, Analog Relay Output Module, Output Module |