SignalFire 960-0052-01 Analog Relay Output Module
Cov ntaub ntawv khoom
| Khoom npe | Analog Output Module |
|---|---|
| SignalFire Number | Analog Output Module Phau Ntawv Qhia |
| Nta |
|
Cov lus qhia siv khoom
Kev sib txuas:
| Hlau Xim | Kev sib txuas |
|---|---|
| RED | Lub zog zoo (10 txog 30 VDC) |
| BLACK | Hauv av |
| Ntsuab | RS-485 |
| Xim av | RS-485 |
| ORANGE | RS-232 Debug/Programming TX, 9600 Baud |
| YAJ | RS-232 Debug/Programming RX, 9600 Baud |
Nco tseg: Rau DIN Gateway, tsuas yog cov xov hlau dub thiab txiv kab ntxwv yuav tsum tau txuas nrog cov Output Module terminals ntawm Gateway.
Lub zog xav tau:
- Lub hwj chim yuav tsum tau muab los ntawm Lub Hwj Huam Cov Ntsiab Lus terminals (10-30VDC).
- Module fais fab xav tau ntawm 12VDC yog qhov siab tshaj plaws ntawm 17mA ntxiv rau qhov nruab nrab ntawm 25mA rau qhov txuas Gateway.
- Yog tias ib qho kev tso tawm tau siv los ua cov zis tam sim no, 20mA yuav tsum muaj rau txhua qhov tso zis tam sim no siv.
Txuas Ntxiv Modules:
Txhawm rau txuas lub module thib ob rau cov khoom siv ntxiv, siv cov khoom siv txuas ntxiv thiab txuas lub module thib ob rau thawj zaug. Qhov thib ob module yuav tsum muaj lub jumper nruab rau ntawm SLAVE pins ze ntawm qhov txuas txuas.
Cov xwm txheej LED:
| LED Description | xwm txheej |
|---|---|
| Slow Flash (3-thib ob ncua) | Lub kaw lus tab tom khiav thiab tsawg kawg yog ib qho chaw taws teeb txuas. |
| Fast Flash (0.5 thib ob nres) | Lub kaw lus tab tom khiav tab sis tsis muaj cov chaw taws teeb tswj tau txuas nrog. |
| Khoom Nyob | Tsis muaj kev sib txuas lus nrog Gateway |
Configuration:
Txhawm rau pib teeb tsa, qhib SignalFire Toolkit. Daim ntawv thov SignalFire Toolkit tuaj yeem rub tawm ntawm www.signal-fire.com/customer. Tom qab kev teeb tsa, tso lub software thiab lub qhov rais cov cuab yeej tseem ceeb yuav qhib. Xaiv qhov chaw nres nkoj COM cuam tshuam nrog GW thiab nyem Pib-Detect Ntaus ntawm COM Chaw nres nkoj. Qhov no yuav qhib lub qhov rais Gateway configuration, qhov twg tag nrho cov cuab yeej teeb tsa tuaj yeem teeb tsa.
Analog/Relay Output Module Kev Sib Txuas:
| Hlau Xim | Kev sib txuas |
|---|---|
| RED | Lub zog zoo |
| BLACK | Hauv av |
| Ntsuab | TSI RS485 |
| Xim av | TSI RS485 |
| ORANGE | RS-232 Debug/Programming TX |
| YAJ | RS-232 Debug/Programming RX |
Nco tseg: Lub hwj chim yuav tsum tau muab los ntawm Lub Hwj Chim Input Ntsia Hlau Terminals (10-30VDC). Module fais fab xav tau ntawm 12VDC yog qhov siab tshaj plaws ntawm 17mA ntxiv rau qhov nruab nrab ntawm 25mA rau Gateway stick. Tsis tas li ntawd, yog tias ib qho kev tso tawm tau siv los ua cov zis tam sim no, 20mA yuav tsum muaj rau txhua qhov tso zis tam sim no siv.
RS485 terminals muab kev nkag mus rau Gateway Modbus interface rau lwm cov ntaub ntawv txuas mus rau Gateway.
Lub SignalFire Analog/Relay Output Module muaj cov hauv qab no nta:
- 8 Analog outputs (0-20mA lossis 0-5V)
- 2 Digital Relay outputs
- Ntau yam DC fais fab input. 10 rau 30VDC
- Kev teeb tsa yooj yim nrog SignalFire ToolKit
- Expansion connector los txuas ob qhov tso zis module
- DIN Rail Ncej
- Cov xwm txheej LED
- DB9 connector rau ToolKit kev twb kev txuas rau lub rooj vag
Specifications
- Lub zog: 10-30 VDC (17mA + analog tso zis tam sim no)
- Ntsuas Qhov Ntsuas Kub: -40 ° C rau + 85 ° C
- Relay Outputs: 2 DPDT Relays 30
- NWS @ 2 Amps 250 qib
- VAC @ 0.25 Nws
Qhov ntev
Lub teeb liab Telemetry
Kev sib txuas
Lub module muab cov ntsia hlau terminals rau kev txuas mus rau SignalFire Gateway. Txuas 6 cov xov hlau mus rau Gateway lo tom qab cov xim sau npe. Rau DIN Gateway tsuas yog cov xov hlau dub thiab txiv kab ntxwv yuav tsum tau txuas nrog cov Output Module terminals ntawm Gateway.
| Hlau Xim | Kev sib txuas |
| RED | Lub zog zoo (10 txog 30 VDC) |
| BLACK | Hauv av |
| Ntsuab | RS-485 |
| Xim av | RS-485 |
| ORANGE | RS-232 Debug/Programming TX, 9600 Baud |
| YAJ | RS-232 Debug/Programming RX, 9600 Baud |
Lub hwj chim yuav tsum tau muab los ntawm Lub Hwj Chim Input Ntsia Hlau Terminals (10-30VDC). Module fais fab xav tau ntawm 12VDC yog qhov siab tshaj plaws ntawm 17mA ntxiv rau qhov nruab nrab ntawm 25mA rau qhov txuas Gateway. Qhov no tsis suav nrog tam sim no los tsav lub teeb tsa analog outputs.
RS485 terminals muab kev nkag mus rau Gateway rau Modbus kev sib txuas lus los ntawm RTU.
Txhawm rau txuas lub module thib ob rau cov khoom siv ntxiv, siv cov khoom siv txuas ntxiv thiab txuas lub module thib ob rau thawj zaug. Qhov thib ob module yuav tsum muaj lub jumper nruab rau ntawm "SLAVE" pins ze ntawm qhov txuas txuas.
Cov xwm txheej LED
Lub module muaj ib lub teeb ntsuab LED muaj rau kev sib txuas lus kev kuaj mob. Tsis tas li ntawd, muaj lub teeb ntsuab LED nyob ze ntawm txhua qhov tso zis uas tig rau thaum cov zis muaj zog.
| LED | Kev piav qhia |
| Slow Flash (3-thib ob ncua) | Lub kaw lus tab tom khiav thiab tsawg kawg ib qho chaw taws teeb txuas nrog. |
| Fast Flash (0.5 thib ob nres) | Lub kaw lus tab tom khiav tab sis tsis muaj cov chaw taws teeb tswj tau txuas nrog. |
| Khoom Nyob | Tsis muaj kev sib txuas lus nrog Gateway |
Kev teeb tsa
Txhawm rau pib teeb tsa, qhib SignalFire Toolkit. Daim ntawv thov SignalFire Toolkit tuaj yeem rub tawm ntawm www.signal-fire.com/customer. Tom qab kev teeb tsa, tso lub software thiab lub qhov rais toolkit tseem ceeb yuav qhib:
Xaiv qhov chaw nres nkoj COM cuam tshuam nrog GW thiab nyem "Auto-Detect Device ntawm COM Port." Qhov no yuav qhib lub qhov rais Gateway configuration, qhov twg tag nrho cov cuab yeej teeb tsa tuaj yeem teeb tsa.
Lub module tsuas yog yuav tsum tau yooj yim configuration siv lub SignalFire ToolKit los qhia cov ntaub ntawv tej thaj chaw deb rau ib tug muab tso zis
Analog/Relay Output Module Connections
Lub Analog/Relay module muab ntsia hlau terminals rau kev txuas mus rau SignalFire Gateway Stick. Txuas 6 cov xov hlau mus rau Gateway lo tom qab cov xim sau npe.
| Hlau Xim | Kev sib txuas |
| RED | Lub zog zoo |
| BLACK | Hauv av |
| Ntsuab | TSI RS485 |
| Xim av | TSI RS485 |
| ORANGE | RS-232 Debug/Programming TX |
| YAJ | RS-232 Debug/Programming RX |
Lub hwj chim yuav tsum tau muab los ntawm Lub Hwj Chim Input Ntsia Hlau Terminals (10-30VDC). Module fais fab xav tau ntawm 12VDC ntawm 17mA ntxiv rau qhov nruab nrab ntawm 25mA rau Gateway stick. Tsis tas li ntawd, yog tias ib qho kev tso tawm tau siv los ua cov zis tam sim no, 20mA yuav tsum muaj rau txhua qhov tso zis tam sim no siv.
RS485 terminals muab kev nkag mus rau Gateway Modbus interface rau lwm cov ntaub ntawv txuas mus rau Gateway.
Txhawm rau txuas lub module thib ob rau cov khoom siv ntxiv, tsuas yog siv cov khoom siv txuas ntxiv thiab txuas lub module thib ob rau thawj zaug. Qhov thib ob module yuav tsum muaj lub jumper nruab rau ntawm "SLAVE" pins ze ntawm qhov txuas txuas. Ntawm qhov thib ob module, tsuas yog ob qho analog tso zis thiab ob lub relay output connectors yuav siv tau.
Cov xwm txheej LED
Lub Analog / Relay tso zis module muaj ib qho ntsuab LED muaj rau kev sib txuas lus kev kuaj mob.
| Cov xwm txheej LED | Kev piav qhia |
| Slow Flash (3-thib ob ncua) | Lub kaw lus tab tom khiav tsawg kawg ib qho chaw taws teeb ntawm kev sib txuas. |
| Fast Flash (1 thib ob nres) | Lub kaw lus tab tom khiav tab sis tsis muaj cov chaw taws teeb tswj tau txuas nrog |
| Khoom Nyob | Tsis muaj kev sib txuas lus nrog Gateway |
Tsis tas li ntawd, muaj ib lub teeb ntsuab LED nyob ze ntawm txhua qhov tso zis relay uas tig rau thaum lub zog relay yog energized.
Kev ua haujlwm
Lub SignalFire Analog/Relay tso zis module txuas nrog lub rooj vag. Lub Gateway tau teeb tsa rau daim ntawv qhia node cov ntaub ntawv rau cov txiaj ntsig analog. Thaum ib lub node qhia txog tus nqi tshiab rau lub rooj vag qhov teeb tsa cov zis yuav cuam tshuam tus nqi ntawd. Txhua qhov kev teeb tsa tau muab khaws cia rau hauv Gateway
Yog hais tias ib lub sij hawm tawm ntawm lub rooj vag lub analog tso zis yuav ua tsis tau ib tug pre-configured poob nqi (lub neej ntawd poob nqi yog 0).
Tsis tas li ntawd, yog hais tias lub analog / relay tso zis module nres tau txais kev hloov tshiab ntawm lub rooj vag rau 5 feeb, tag nrho cov outputs yuav raug teem rau 0 thiab ob relays yuav de-energize.
Lub Analog/Relay tso zis module tsuas yog yuav tsum tau yooj yim configuration siv lub SignalFire ToolKit rau daim ntawv qhia / teev cov ntaub ntawv tej thaj chaw deb rau ib tug muab tso zis. Analog outputs tuaj yeem ua haujlwm tam sim no (0-20mA / 4-20mA), lossis vol.tage (0-5V / 1-5V). Cov zis hom yuav tsum tau teem los ntawm swb keyboards nyob rau hauv lub module.Ua ntej no tshem tawm lub cover siv ib tug me me flathead screwdriver, lub hau yog tuav ntawm clips. 
Txhua qhov hloov pauv tswj ib khub ntawm cov zis. Rau example, qhov hloov mus rau sab laug (S1) teeb tsa ob qhov tso zis 1 thiab tso zis 2 rau mA lossis Volts. Saib cov lus hauv qab no rau kev hloov daim ntawv qhia.
| Hloov | Cov zis |
| S1 | 1 thiab 2 |
| S2 | 3 thiab 4 |
| S3 | 5 thiab 6 |
| S4 | 7 thiab 8 |
Txhawm rau teeb tsa Analog / Relay outputs hauv SignalFire ToolKit ua ntej txuas mus rau DB9 chaw nres nkoj ntawm lub module txuas nrog Gateway lo rau koj lub PC. Qhib ToolKit thiab txuas mus rau lub rooj vag.
Hauv lub qhov rais Gateway configuration, mus rau 'File' zaub mov thiab xaiv 'Analog/Relay Output Module'. Qhov no yuav qhib lub qhov rais configuration hauv qab no
Rau txhua qhov tso zis, txoj cai los tswj cov zis yuav tsum raug txhais. Rau example, nyob rau hauv lub configuration qhov rais saum toj no analog tso zis 1 yog txhais tau tias yuav tsum tau tswj los ntawm Modbus ID 1 uas yog ib tug Sentinel-Analog qhov chaw ntawm node. Lub uA register 3001 raug xaiv. Cov ntawv sau npe no yog ntsuas kom 4000uA sib npaug rau qhov tso zis ntawm 4mA thiab 20000uA sib npaug rau qhov tso zis ntawm 20mA. Tsis tas li ntawd, 'Fail with Output Value' yog teem rau 3.5mA. Tus nqi sau npe tam sim no qhia txog tus nqi sau npe tshiab kawg ntawm lub rooj vag muaj rau qhov chaw sau npe / sau npe. Nias lub khawm refresh yuav hloov kho cov nqi sau npe tam sim no. Tom qab kho ib qho ntawm cov cai, nyem rau ntawm 'Sau Cov Chaw Tso Tawm rau Gateway' txhawm rau khaws cov cai hauv lub rooj vag. Txhua txoj cai uas tsis tau txhais (Node Hom teeb rau 'tsis muaj') yuav ua rau cov channel raug teeb tsa rau 0.
Ib ntus tso zis overrides
Nws muaj peev xwm override ib ntus tso zis rau tus nqi uas tau teev tseg rau kev sim. Nyob rau hauv qab ntawm lub qhov rais tsuas yog xaiv cov zis channel rau override, nkag mus rau tus nqi override thiab nias lub pob 'Teem tso zis' khawm. Qhov no yuav yuam kom xaiv cov zis channel rau qhov teeb tsa tus nqi rau 5 feeb lossis kom txog thaum nias 'Clear Output Overrides' khawm. Qhov no muaj txiaj ntsig zoo rau kev sim. Nco ntsoov tias cov channel yuav raug suav hais tias yog daj thaum lub override ua haujlwm.
Chaw taws teeb shutdown
Ntxiv rau qhov Analog/Relay Output module teeb tsa, ob lub relays tuaj yeem xaiv tau los ntawm kev siv lub rooj vag RSD. Los ntawm lub qhov rais Gateway configuration, xaiv 'Settings> Chaw taws teeb Shutdown' nyob rau sab saum toj toolbar. Qhov no yuav qhib lub qhov rais configuration hauv qab no. Lub relay tswj yuav tsum tau teeb tsa nyob rau hauv ob qho tib si Analog / Relay Output module nqis LOSSIS lub rooj RSD tsis yog ob qho tib si. Rau txhua qhov tso zis, txhais ib lossis ntau txoj cai kom toggle cov zis analog. Configure txhua txoj cai sab laug mus rau sab xis, pib nrog lub hauv paus ntawm qhov uas koj xav tswj cov zis, tom qab ntawd lub logic rau toggling rau thiab tawm, thiab tom qab ntawd cov khoom tsim tawm. Txhawm rau siv cov txiaj ntsig ntawm Analog Output module lub "Destination Slave ID" yuav tsum tau teeb tsa rau Gateway's qhev ID uas yog 247 los ntawm lub neej ntawd. Rau example, nyob rau hauv lub configuration qhov rais saum toj no, Relay 1 ntawm Analog Output Module 1 yuav tig rau thaum qhev ID 1 lub analog input siab tshaj 9000uA (9mA) thiab tua thaum lub analog input poob qis dua 8000uA (8mA). Qhov sib txawv ntawm 1000uA yog los tiv thaiv cov zis los ntawm kev rov qhib thiab tawm yog tias cov lus qhia analog yog nyob rau hauv 9000uA ntau. Thaum ib qho o utput tau txhais los ntawm ntau qhov chaw, nws tsuas yog tig rau yog tias tag nrho nws cov Energize tau ntsib. Txawm li cas los xij, thaum nws tig rau, nws yuav tua yog tias ib qho ntawm nws qhov De-Energize tau ntsib. Hauv lwm lo lus, Energize tej yam kev mob yog Boolean THIAB logic, thaum lub De-Energize tej yam kev mob yog Boolean LOSSIS logic.Tom qab kho ib yam ntawm cov kev cai, nyem rau ntawm lub 'Sau tso zis chaw rau lub rooj vag' khaws cov kev hloov nyob rau hauv lub rooj vag. Yog tias Analog Output Module poob kev sib txuas lus nrog lub rooj vag, nws yuav kaw tag nrho cov zis tom qab 5 feeb. Yog xav paub ntxiv txog lub qhov rais Remote Shutdown, thov mus saib phau ntawv Gateway.
Cov ntaub ntawv / Cov ntaub ntawv
 |
SignalFire 960-0052-01 Analog Relay Output Module [ua pdf] Daim ntawv qhia kev teeb tsa 960-0052-01 Analog Relay Output Module, 960-0052-01, Analog Relay Output Module, Output Module |