LCD Series Access Control
Bukana ea Mosebelisi
Ka kopo bala bukana ka hloko pele o sebelisa yuniti ena.
Selelekela
Sehlahisoa sa letoto lena ke moloko o mocha oa taolo ea phihlello e ikemetseng.lt e amohela moralo o mocha oa ARM core 32-bit microprocessor, o matla, o tsitsitseng le o tšepahalang . E na le mokhoa oa ho bala le mokhoa o ikemetseng oa taolo ea phihlello joalo-joalo. E sebelisoa haholo liketsahalong tse fapaneng, joalo ka liofisi, libaka tsa bolulo, villa, banka le chankana joalo-joalo.
Likaroloana
| Mofuta oa karete | Bala Karete ea 125KHz le Karete ea HID(Boikhethelo) |
| Bala karete ea Mifare ea 13.56MHz le karete ea CPU(Ka boikhethelo) | |
| Sebopeho sa Keypad | Capacitive touch keypad |
| Mokhoa oa ho tsoa | E na le mokhoa oa ho bala, mokhoa oa phetisetso o ka fetoloa ke mosebelisi |
| Karete ea Tsamaiso | Monoana, karete, khoutu kapa mekhoa e mengata ea ho kopanya, sesebelisoa sa mohala oa mohala (Boikhethelo) |
| Matla a mosebelisi | Ts'ehetso ea admin eketsa karete le karete ea ho hlakola admin |
| Notlolla Letshwao | NO, NC, COM tlhahiso e sebelisa relay |
| Sephetho sa Alamo | Sebelisa MOS tube output ho khanna alamo ka ho toba (ho ikhethela) |
Litlhaloso tsa Tekheniki
| Tshebetso VoltagE: DC12-24V | Boemo ba hona joale: ≤60mA |
| Ts'ebetso ea Hona joale: ≤100mA | Mocheso oa ho sebetsa: -40 C-60 C |
| Mongobo o sebetsang: 0-95% | Litsela tsa ho fihlella: Menoana, karete, khoutu, mekhoa e mengata ea ho kopanya, sesebelisoa sa mohala oa mohala (Boikhethelo) |
Ho kenya
- Tlosa foromo ea sekoaelo se ka morao "keypad" u sebelisa "screw drive" e khethehileng e fanoeng
- Eketsa masoba a 2 leboteng bakeng sa screw ea ho itapa le lesoba le le leng bakeng sa thapo
- Kenya li-bungs tsa rabara tse fanoeng ka har'a mekoti e 'meli
- Lokisa sekoahelo se ka morao ka thata leboteng ka li-screws tse 2 tsa self tapping
- Hlakola thapo ka lesoba la thapo
- E khomaretse letlapa la likonopo sekoahelong se ka morao.(Sheba setšoantšo ka ho le letona)
Wiring
| Mmala | Matšoao | Tlhaloso |
| Pinki | Bell-A | Konopo ea tšepe ea monyako qetellong |
| Pinki | Bell-B | Konopo ea tšepe ea monyako ka lehlakoreng le leng |
| Botala | DO | Kenyelletso ea Wiegand (Sephetho sa Wiegand joalo ka mokhoa oa ho bala) |
| Bosoeu | D1 | Kenyelletso ea Wiegabd (Sephetho sa Wiegand joalo ka mokhoa oa ho bala) |
| Hlooho | Alamo | Letšoao la alamo la MOS tube drainage qetellong |
| Bosehla | Bula(BEEP) | Qetello ea ho kenya konopo ea ho tsoa (ho kenya Beeper joalo ka mokhoa oa ho bala) |
| Brown | DIN(LED) | Qetello ea ho kenya sensor ea monyako (mokhoa oa ho bala karete ea LED ea taolo ea taolo) |
| Khubedu | +12V | Phepelo e ntle ea motlakase |
| Ntsho | GND | Phepelo e mpe ea motlakase |
| Boputsoa | NO | Relay NO pheletso |
| Bopherese | COM | Phetiso ea COM qetellong |
| namunu | NC | Relay NC pheletso |
Setšoantšo
6.1 Setšoantšo se khethehileng sa phepelo ea motlakase
6.2 Mokhoa oa ho bala
Tlhophiso ea Sistimi
Khutlisa ho Femethari e kamehla
Ha u lebala phasewete ea molaoli, e khutlisetse ho tlhophiso ea kamehla ea feme, Lekunutu la molaoli ea kamehla ke "999999"
Mokhoa oa 1: Tlosa, bulela, mabone a skrineng, tobetsa konopo ea #, Pontšo e tla bontša hore litlhophiso tsa kamehla li atlehile.
Mokhoa oa 2: Tlosa, tobetsa konopo ea ho tsoa khafetsa, bulela, Pontšo e tla bontša hore litlhophiso tsa kamehla li atlehile.
Mokhoa oa 3: 
Fetolela mokhoa oa ho bala ho ea ho mokhoa o ikemetseng oa taolo ea phihlello
Ha sesebelisoa se le tlas'a mokhoa oa ho bala karete, tobetsa * nako e telele ho fetola mokhoa oa ho laola phihlello o ikemetseng
Hlakola alamo
Bala karete ea admin kapa u bale karete e nepahetseng ea mosebelisi kapa menoana e nepahetseng kapa password ea admin
Hlokomela: Ha alamo e hlaha, buzzer e tla lla "woo, woo, ..." mme alamo e ka hlakoloa ka ho bala karete e nepahetseng kapa ho kenya phasewete ea admin.
Lenane la ho paka
| Ntho | Tlhaloso | Qty | Ela hloko |
| Sesebelisoa | 1 | ||
| Bukana ea Mosebelisi | 1 | ||
| Sekurufu sa ho ipeta | φ4mmx25 limilimithara | 2 | Bakeng sa ho kenya le ho lokisa |
| Rabara polaka | φ6mmx28 limilimithara | 2 | Bakeng sa ho kenya le ho lokisa |
| Naleli screwdriver | φ20mmx60mm | 1 | morero o khethehileng |
| Lisebelisoa tsa naleli | φO3mmx5mm | 1 | Bakeng sa ho lokisa sekoahelo se ka pele le sekoahelo se ka morao |
Hlokomela:
- Ka kopo u se ke ua lokisa mochine ntle le tumello. Haeba ho na le bothata, ka kopo e khutlisetse ho moetsi hore e lokisoe.
- Pele o kenya, haeba o batla ho phunya masoba, ka kopo hlahloba ka hloko lithapo tse patiloeng kapa li-conduits ho thibela mathata a sa hlokahaleng a bakoang ke ho phunya lithapo tse patiloeng ha u phunya. Sebelisa likhalase tsa tšireletso ha u phunya kapa u lokisa likhechana tsa terata.
- Haeba sehlahisoa se ntlafalitsoe, litaelo li ka fapana ntle le tsebiso pele.
Mosebetsi oa WIFl 
- Skena khoutu ea QR ka mohala oa hau oa thekeng ho khoasolla Tuya Smart APP kapa batla Tuya Smart APP ho khoasolla APP ka mmaraka oa lisebelisoa tsa mohala (setšoantšo sa 1)
- Bula APP, tobetsa "+" hukung e kaholimo ho le letona, Eketsa Sesebelisoa (setšoantšo sa 2) (Hlokomela: Ha u batla lisebelisoa, bulela lits'ebeletso tsa Bluetooth le lits'ebeletso tsa sebaka pele)
Ka nako e ts'oanang, bulela "wireless pairing"
Hlokomela:tshebetso ho taolo ya phihlello.Tobetsa
- Kenya password ea WIFI, ebe o tobetsa E 'ngoe. (Setšoantšo sa 3)
http://smart.tuya.com/download - Emela khokahanyo e atlehileng, tobetsa Qetella
- Beha notlela ka remoutu, tobetsa tlhophiso, bula litlhophiso tsa ho notlolla ka remoutu
- Tobetsa ho notlolla
- Taolo ea litho → Motsamaisi → Eketsa monwana →|qala ho eketsa → kenya mongolo oa menoana habeli o kenye ka katleho,kenya lebitso, tobetsa Qetile.
- Eketsa mosebelisi oa khoutu ka ho tobetsa kenya khoutu ea nakoana nako le nako, 'me u kenye khoutu ea linomoro tse 6 kapa u tobetse e hlahisitsoeng ka tšohanyetso, ebe u kenya lebitso la khoutu, ebe u tobetsa boloka.
- Kenya karete ka ho tobetsa Qala eketsa, swipe karete e le 'ngoe nakong ea metsotsoana e 60, eketsa karete ka katleho, ebe u tlatsa lebitso la karete ebe u tobetsa "etsa".
- Eketsa mosebelisi ea tloaelehileng ka ho tobetsa setho se tloaelehileng, ebe o tobetsa k'honeng e kaholimo ho le letona "+", ebe o kenya tlhahisoleseling e amanang le eona ebe o tobetsa "mohato o latelang".
- Kenya khoutu ea nakoana, tobetsa 'hang', kenya lebitso la khoutu, tobetsa "save offline code", e felile.
- Lirekoto tsa ho notlolla potso
- Litlhophiso: mekhoa ea ho fihlella, nako ea alamo, molumo, puo.
Litokomane / Lisebelisoa
 |
SIB EM WiFi Touch Keypad e nang le LCD [pdf] Bukana ea Mosebelisi EM WiFi Touch Keypad e nang le LCD, EM WiFi, Touch Keypad e nang le LCD, keypad e nang le LCD, e nang le LCD, LCD |