SHURE MXA920 Ceiling Array Microphone

Tlhahisoleseding ya Sehlahiswa

MXA920 ke maekerofounu ea siling e entsoeng ke Shure Incorporated. E etselitsoe ho fana ka molumo oa boleng bo holimo 'me e loketse ho sebelisoa likamoreng tse fapaneng. Microphone e ts'ehetsa Power Over Ethernet (PoE) bakeng sa ho kenya habonolo le ho hokahanya. E tla le mefuta e fapaneng ea mehlala le lisebelisoa tsa boikhethelo ho ntlafatsa ts'ebetso ea eona. MXA920 e boetse e na le software ea taolo le matla a ntlafatso ea firmware.

Litaelo tsa Tšebeliso ea Sehlahisoa

Rea qala:

1. Kenya microphone ea MXA920 sebakeng se lakatsehang holim'a siling 'me u se kopanye le boema-kepe ba PoE ho sesebelisoa sa marang-rang u sebelisa thapo ea Ethernet.
2. Netefatsa hore komporo ea hau e sebelisang software ea Designer e hoketsoe marang-rang a tšoanang.
3. Bula software ea Designer 'me u hlahlobe hore na u hokahane le marang-rang a nepahetseng ho Litlhophiso.
4. Ho software ea Designer, ea ho lisebelisoa tsa Marang-rang 'me u khetholle MXA920 lethathamong ka ho tobetsa letšoao la sehlahisoa sa eona ho bonesa mabone.

Tlhophiso ea Moqapi:

1. Kenya le ho Hokela:
   • Theha morero o mocha ho software ea Moqapi ka ho ea ho Myprojects> Newproject.
   • Khetha Ncha > Kamore(phela) ho theha kamore e ncha bakeng sa projeke ea hau.
   • Hula 'me u lahlele MXA920, P300, le lisebelisoa life kapa life tseo u batlang ho li kenya ka kamoreng ea hau ho tsoa lethathamong la lisebelisoa tsa inthanete.
2. Tsela ea molumo:
   • Sebelisa Phatlalatso ea Moqapi ea Optimize bakeng sa ho tsamaisa molumo habonolo le ts'ebeliso ea DSP.
   • Kgetha Optimize in Designer software.
   • Sheba litsela tsa molumo le litlhophiso ho netefatsa hore li finyella litlhoko tsa hau.
   • U ka boela ua tsamaisa molumo ho Moqapi ka ntle ho Optimize workflow kapa sebelisa Dante Controller.

Ka ho latela litaelo tsena, o ka theha le ho lokisa maekrofono a siling ea MXA920 o sebelisa software ea Designer bakeng sa ts'ebetso e nepahetseng ea molumo ka phapusing ea hau.

Rea qala

Moqapi oa Moqapi
Kamora ho qeta ts'ebetso ena ea mantlha ea ho seta, o lokela ho khona ho:

• Fumana MXA920 ho Moqapi
• Eketsa libaka tsa tšireletso
• Fetola litlhophiso tsa DSP le molumo oa tsela

U tla hloka:

• Cat5e (kapa ho feta) cable ea Ethernet
• Sesebelisoa sa marang-rang se fanang ka Matla holim'a Ethernet (PoE)
• Shure Designer software e kentsoe komporong. Khoasolla ho shure.com/designer.

Mohato oa 1: Kenya le Hokela

1. Kenya maekerofounu ebe o e hokela boema-kepeng ba PoE ho switjha ea marang-rang o sebelisa thapo ea Ethernet.
2. Hokela komporo ea hau e sebelisang Designer ho netweke e tšoanang.
3. Bula Moqapi. Hlahloba hore na o hokahane le marang-rang a nepahetseng ho Litlhophiso.
4. Eya ho Lisebelisoa tsa Marang-rang. Ho tseba lisebelisoa, tobetsa aekhone ea sehlahisoa ho bonesa mabone sesebelisoa. Fumana MXA920 lenaneng.

Mohato oa 2: Tsela ea Audio
Mokhoa o bonolo oa ho tsamaisa molumo le ho sebelisa DSP ke ka Moralo oa Optimize workflow. Ntlafatsa litsela tsa mats'oao a molumo, e sebelisa litlhophiso tsa DSP, e bulela khokahano e sa bueng, 'me e nolofalletsa taolo ea LED bakeng sa lisebelisoa tse hoketsoeng.
Bakeng sa example, re tla hokela MXA920 le P300.

1. Eya ho Merero ea ka > Morero o mocha ho etsa morero o mocha.
2. Kgetha Ntjha > Kamore (phela). Lisebelisoa life kapa life tsa inthanete li hlaha lenaneng. Hula 'me u lihele MXA920, P300, le lisebelisoa life kapa life ho li kenya kamoreng ea hau.
3. Kgetha Ntlafatsa. U ka tsamaisa molumo ka letsoho ho Moqapi ka ntle ho Optimize workflow, kapa sebelisa Dante Controller.
4. Lekola litselana tsa molumo le li-setting ho netefatsa hore li lumellana le litlhoko tsa hau. U kanna ua hloka ho:
   • Hlakola litsela tse sa hlokahaleng.
   • Netefatsa hore lipontšo tsa litšupiso tsa AEC li tsamaisoa ka nepo.
   • Lipina tse ntle tsa DSP li a thibela ha ho hlokahala.
5. Romella molumo ho tsoa ho P300 ho ea mehloling e meng u sebelisa motsoako oa matrix. Sebaka se tloaelehileng ke komporo e hoketsoeng ke USB e nang le software ea liboka.

Mohato oa 3: Eketsa Tšireletso
Boemo ba kamehla ke sebaka se matla sa 30 x 30 foot (9 ka 9 metres) sebaka sa tšireletso. Motho leha e le ofe ea buang ka hare o na le boitsebiso, 'me ntho leha e le efe e ka ntle ho sebaka seo e ke ke ea nkoa.

Ho eketsa libaka tse ling tsa tšireletso:

1. E-ea ho [Kamore ea hau] > 'mapa oa tšireletso ebe u khetha MXA920.
2. Kgetha Eketsa kgaso mme o kgethe sebaka se matla kapa se inehetseng sa kgaso. O ka eketsa motsoako ofe kapa ofe oa libaka tse fihlang ho tse 8 ho maekrofono ka 'ngoe. Tsamaisa 'me u fetole boholo ka moo ho hlokahalang.
3. Iketsetse mokhoa oa ho mamela maekerofounu ka kotloloho (ka mohala oa Dante amp, bakeng sa mohlalaample). Etsa mohala oa teko le sistimi eohle ea liboka. Fetola phaello le DSP kamoo ho hlokahalang ho fumana molumo o motle oa kamore. U ka boela ua tima mokhoa oa ho ikemela ho Litlhophiso ho beha sebaka sa ho fihla ho 8 lobes.

Web Kemiso ea Kopo

Kamora ho qeta ts'ebetso ena ea mantlha ea ho seta, o lokela ho khona ho:

• Fumana li-MXA920's web kopo
• Eketsa libaka tsa tšireletso
• Tsamaisa molumo ho lisebelisoa tse ling tsa Dante u sebelisa Dante Controller

U tla hloka:

• Cat5e (kapa ho feta) cable ea Ethernet
• Sesebelisoa sa marang-rang se fanang ka Matla holim'a Ethernet (PoE)
• Shure Web Sesebelisoa sa Discovery le software ea Dante Controller

Mohato oa 1: Kenya le Hokela

1. Kenya maekerofounu ebe o e hokela boema-kepeng ba PoE ho switjha ea marang-rang o sebelisa thapo ea Ethernet.
2. Hokela komporo e sebetsang Shure Web Sesebelisoa sa Discovery le Dante Controller ho marang-rang a tšoanang.
3. Open Shure Web Sesebelisoa sa Discovery. Fumana MXA920 lethathamong la lisebelisoa, 'me u tobetse habeli ho bula web kopo..

Mohato oa 2: Eketsa Tšireletso
Boemo ba kamehla ke sebaka se matla sa 30 x 30 foot (9 ka 9 metres) sebaka sa tšireletso. Motho leha e le ofe ea buang ka hare o na le boitsebiso, 'me ntho leha e le efe e ka ntle ho sebaka seo e ke ke ea nkoa.

Ho eketsa libaka tse ling tsa tšireletso:

1. Eya ho Coverage > Eketsa tšireletso.
2. Khetha sebaka se matla kapa se inehetseng sa tšireletso. O ka eketsa motsoako ofe kapa ofe oa libaka tse fihlang ho tse 8 ho maekrofono ka 'ngoe. Tsamaisa 'me u fetole boholo ka moo ho hlokahalang.
3. Iketsetse mokhoa oa ho mamela maekerofounu ka kotloloho (ka mohala oa Dante amp, bakeng sa mohlalaample). Fetola phaello le DSP kamoo ho hlokahalang ho fumana molumo o motle oa kamore. Ho na le li-fader bakeng sa sebaka se seng le se seng sa tšireletso le bakeng sa tlhahiso ea automix.

U ka boela ua tima mokhoa oa ho ikemela ho Litlhophiso ho beha sebaka sa ho fihla ho 8 lobes.

Mohato oa 3: Tsela ea Audio

1. Ho tsamaisa molumo ho lisebelisoa tse ling tsa Dante, sebelisa Dante Controller. Bula Dante Controller 'me u fumane MXA920 lethathamong la li-transmitters. Ka tšireletso ea othomathike, MXA920 e romella feela molumo ho tsoa ho tlhahiso ea automix. Fetisetsa likanale 1-8 sebetsa feela ha othomathike khaso e tingoe.
2. Fumana sesebelisoa sa Dante seo u romellang molumo ho sona lenaneng la ba amohelang. Ho etsa tsela ea molumo, sheba lebokose moo MXA920's automix output e kopanang le mocha oa ho kenya mochine oa mochine.
3. Etsa mohala oa teko le sistimi eohle ea liboka. Fetola litaba, phaello, le DSP ha ho hlokahala.

Likarolo

Likarolo tsa MXA920

Tlosa boemo ba LED
Iketsetse 'mala le boitšoaro ba LED ho Moqapi: Phetoho ea sesebelisoa > Litlhophiso > Mabone.
Litlhophiso tsa kamehla

Boemo ba Microphone	LED Mmala/Boitshwaro
E sebetsa	Botala (bo tiileng)
E khutsisitsoe	E khubelu (e tiileng)
Boitsebiso ba hardware	Botala (bo phatsimang)
Ntlafatso ea firmware e ntse e tsoela pele	Botala (e tsoela pele ka har'a bar)
Seta bocha	Seta bocha marang-rang: E khubelu (e tsoela pele ka har'a bar) Khutlisa fektheri: E etsa hore sesebelisoa se matlafatsoe
Phoso	Bokhubelu (ho petsoha, ho benya ho hong)
Matlafatso ea sesebelisoa	Flash e nang le mebala e mengata, ebe e putsoa (e ea pele le morao kapele ka har'a bar)

1. Seta botjha konopo
2. Sebaka sa marang-rang sa RJ-45
3. Boemo ba marang-rang LED (botala)
   • Tloha = Ha ho na khokahanyo ea marang-rang
   • Ka hodima = Khokahano ea marang-rang e thehiloe
   • Ho phatsima = Khokahano ea marang-rang ea sebetsa
4. Lebelo la netweke LED (amber)
   • Tloha = 10/100 Mbps
   • Ka hodima = 1 Gbps
5. Li-screws tsa mahlo bakeng sa ho fanyeha (12 mm bophara)
6. VESA MIS-D likoti tse kenyang
7. Lintlha tse hokeletsoeng tsa polokeho

Matla holim'a Ethernet (PoE)
Sesebelisoa sena se hloka hore PoE e sebetse. E lumellana le mehloli ea PoE ea Sehlopha sa 0. Matla holim'a Ethernet a fanoa ka e 'ngoe ea litsela tse latelang:

• Sesebelisoa sa marang-rang se fanang ka PoE
• Sesebelisoa sa poe sa PoE

Mefuta e sa tšoaneng ea Mohlala

SKU	Tlhaloso
MXA920W-S	Maekerofounu e sekwere se sesoeu
MXA920W-S-60CM	Maekerofounu ya sekwere se sesoeu (60cm)
MXA920AL-R	Microphone e chitja ea aluminium
MXA920B-R	Microphone e chitja e ntšo
MXA920W-R	Microphone e chitja e tšoeu

Lisebelisoa tsa boikhethelo le likarolo tse ncha

• A900-S-GM Gripple Mount Kit, Sekwere
• A900W-R-GM Gripple Mount Kit, Round, White Cover
• A900B-R-GM Gripple Mount Kit, Round, Black Cover
• A900-S-PM Pole Mount Kit, Sekwere
• A900W-R-PM Pole Mount Kit, Round, White Cover
• A900B-R-PM Pole Mount Kit, Round, Black Cover
• A900-PM-3/8IN Mount Kit
• Sesebelisoa sa A910-JB Junction Box
• A910-HCM Thaba ea siling e thata
• RPM904 foreimi le kopano ea grille bakeng sa MXA920W-S-60CM kapa MXA910W-60CM
• RPM901W-US foreimi le kopano ea grille bakeng sa MXA920W-S kapa MXA910W-US

Setifikeiti sa MXA920 Codec
Fumana litifikeiti tsa audio tsa codec tsa MXA920 ho shure.com/mxa920.

Se ka Lebokoseng

Maekerofounu ea sekwere kapa se chitja	MXA920-S kapa MXA920-R
Sekwere kapa se chitja sa hardware kit
Sekwere:
Maqhama a lithapo (8) Li-tab tsa ho imolla khatello (3) Sete ea pente ea rabara	Sekwere: 90A49117 Potoloho: 90A49116
Potoloho:
Lithae tsa mohala (8) Li-tab tsa ho imolla khatello (3)

Seta Botjha Konopo

Konopo ea reset e ka morao ho grille. Ho e sutumetsa, sebelisa sekotwana sa pampiri kapa sesebelisoa se seng. Libaka tsa likonopo:

• Li-microphone tsa lisekoere: Ka mor'a lesoba la grille le selikalikoe sa silika ho pota-pota.
• Li-microphone tse pota-potileng: Ka morao ho lesoba la pele la grille ho le letona la boemo bo sa bueng ba LED.

Seta Mekhoa bocha

• Khutlisetsa marang-rang (tobetsa bakeng sa metsotsoana e 4-8): E seta bocha litlhophiso tsohle tsa IP tsa taolo ea Shure le marang-rang a audio hore e be litlhophiso tsa feme. LED e khubelu haufi le bar.
• Seta fektheri e felletseng (tobetsa ho feta metsotsoana e 8): E seta bocha li-setting tsohle tsa marang-rang le litlhophiso hore li be maemong a feme. Multicolor flash, ebe LED e putsoa hammoho le bar.

MXA920 Control Software

Ho na le mekhoa e 'meli ea ho laola MXA2:

• Sebelisa software ea Shure Designer
  • Laola lisebelisoa tsohle tsa Shure sebakeng se le seng
  • Tsamaisa molumo ho ea le ho tsoa ho lisebelisoa tsa Shure
• Fumana li-MXA920's web kopo le Shure Web Sesebelisoa sa Discovery
  • Laola maekrofounu e 1 ka nako
  • Tsamaisa molumo ka software ea Dante Controller

Ho Laola Lisebelisoa ka Shure Designer Software
Ho laola litlhophiso tsa sesebelisoa sena, sebelisa software ea Shure Designer. Moqapi o thusa bahokahanyi le bahlophisi ba sistimi ho rala sekoaelo sa molumo bakeng sa lits'ebetso ho sebelisa li-microphone tsa MXA le lisebelisoa tse ling tsa marang-rang tsa Shure.

Ho fihlella sesebelisoa sa hau ho Designer:

1. Khoasolla le ho kenya Moqapi khomphuteng e hokahantsoeng le netweke e le ngoe le sesebelisoa sa hau.
2. Bula Moqapi, 'me u hlahlobe hore na u hokahane le marang-rang a nepahetseng ho Litlhophiso.
3. Tobetsa lisebelisoa tsa inthanete. Lenane la lisebelisoa tsa inthanete lea hlaha.
4. Ho khetholla lisebelisoa, tlanya lets'oao la sehlahisoa ho bonesa mabone a sesebelisoa. Khetha sesebelisoa sa hau lenaneng ebe o tobetsa konopo ea ho Lokisa ho laola lisebelisoa tsa sesebelisoa.

Ithute haholoanyane ho morao.com/designer. Hape o ka fihlella litlhophiso tsa sesebelisoa ka Shure Web Ho sibolloa ha lisebelisoa.

Mokhoa oa ho nchafatsa Firmware u sebelisa Moqapi
E sebetsa ho Moqapi oa 4.2 le ho feta. Pele o kenya lisebelisoa, hlahloba lisebelisoa tsa firmware o sebelisa Designer ho nka peletage ea likarolo tse ncha le ntlafatso. U ka boela ua kenya firmware u sebelisa Shure Update Utility bakeng sa lihlahisoa tse ngata.

Ho ntlafatsa:

1. Bula Moqapi. Haeba ho na le firmware e ncha eo ha u so e khoasolle, Moqapi o bonts'a banner e nang le lintlafatso tse fumanehang. Tobetsa ho khoasolla firmware.
2. Eya ho Lisebelisoa tsa Marang-rang 'me u fumane lisebelisoa tsa hau.
3. Khetha mofuta oa firmware bakeng sa sesebelisoa ka seng ho tsoa ho Kholomo ea Firmware e fumanehang. Etsa bonnete ba hore ha ho motho ea fetolang litlhophiso tsa sesebelisoa nakong ea ntlafatso.
4. Khetha lebokose le haufi le sesebelisoa ka seng seo u rerileng ho se ntlafatsa ebe u tobetsa Update firmware. Lisebelisoa li ka nyamela lisebelisoa tsa Marang-rang nakong ea ntlafatso. Se ke oa koala Moqapi ha u ntse u ntlafatsa firmware.

Setšoantšo sa MXA920

Ho fihlella litlhophiso tsa 'mapa oa khaso:

• Moqapi: Kenya maekrofounu ka phaposing, 'me u ee ho 'mapa oa Coverage.
• Web kopo: Eya ho Coverage.

Ho laola tšebetso ea othomathike, ea ho Litlhophiso > Kakaretso > Ts'ebetso ea othomathiki.

MXA920 E Koahetse Sebaka se Sekae?
Bakeng sa likamore tse ngata, Shure o khothaletsa:

• Sebaka se seholo ho tloha ho sebui ho ea ho maekrofounu: maoto a 16 (4.9 metres)
• Bophahamo bo phahameng ka ho fetisisa: maoto a 12 (limithara tse 3.7)
• Linomoro tsena li boetse li ipapisitse le molumo oa kamore ea hau, kaho le lisebelisoa. Ka ts'ireletso ea othomathiki, sebaka sa ts'ireletso sa kamehla ke sebaka se matla sa 30 x 30 maoto (9 x 9 metres) sebaka sa tšireletso.

Tšireletso e Sebetsa Joang?

• Ha o sebelisa mokhoa o ikemetseng, maekerofounu e tšoara batho ba buang bao u batlang ho e utloa 'me e qoba libaka tseo u reng e se qobe. O ka eketsa motsoako oa libaka tse 8 tse matla le tse inehetseng tsa tšireletso ka maekrofono.
• Haeba o tima ts'ebetso ea othomathike, o ka tsamaisa li-lobes tse 8 ka bowena.
• Ka ts'ebetso ea othomathiki e butsoitseng kapa e koetsoeng, MXA920 e sebelisa theknoloji ea Shure's Autofocus ho ntlafatsa litaba ka nako ea nnete ha batho ba buang ba chencha maemo kapa ba ema. Autofocus e lula e sebetsa, 'me ha ho hlokahale hore u lokise letho hore e sebetse.

Eketsa Libaka tsa Tšireletso

• Khaso e iketsang = On

Ha o bula Coverage, ho na le sebaka sa tšireletso se matla sa 30 by 30 foot (9 by 9 meter) se seng se loketse ho sebelisoa. Motho leha e le ofe ea buang ka hare o na le tšireletso, leha a ema kapa a tsamaea.

Kgetha Eketsa kgaso ho eketsa dibaka tse ding tsa kgaso. U ka sebelisa libaka tse fihlang ho tse 8 tse koahelang maekrofono ka 'ngoe, 'me u ka kopanya mefuta ka bobeli ha ho hlokahala. Hula le ho theola ho tsamaisa libaka tsa tšireletso.

Libaka tsa Tšireletso tse Matla

Libaka tsa tšireletso tse matla li na le tšireletso e bonolo, ho bolelang hore maekerofounu e ikamahanya le maemo ho koahela bohle ba buang sebakeng sa khaso. Fetola boholo ho lekana sebaka sa hau, 'me sebui leha e le sefe se ka har'a meeli ea sebaka sa tšireletso se tla ba le tšireletso ea microphone (esita le ha ba ntse ba tsamaea).
Libaka tse Nehetsoeng tsa Tšireletso

Libaka tse inehetseng tsa tšireletso li na le ts'ebetso ea microphone ka linako tsohle. Li na le boholo bo behiloeng ba 6 le 6 maoto (1.8 x 1.8 metres) 'me li sebetsa hantle bakeng sa batho ba buang ba leng boemong bo le bong boholo ba nako, joalo ka sethaleng kapa letlapa le lesoeu.
Thibela Melumo e sa Batloeng
Ha u ntse u theha tšireletso, u ka 'na ua batla ho thibela melumo e sa batleheng ho tsoa lets'oao la maekerofounu ea hau (joalo ka mamati kapa lisebelisoa tsa HVAC). Ho na le mekhoa e 'meli ea ho thibela melumo e sa batleheng karolong ea kamore:

• Khaso e khutsitseng
• Ha ho tšireletso

Litsela tse peli tsa ho thibela molumo o sa batleheng

	Tšebeliso e khutsitseng	Ha ho Tšireletso
E utloahala joang?	Ho hana haholo bakeng sa melumo e sa batleheng	Ho hana hantle bakeng sa melumo e sa batleheng
Na molumo o sa batleheng o ka nkuoa?	Che. Melumo e ka hare ho melumo e khutsitseng e ke ke ea nkuoa ke libaka tse sebetsang tsa lilemo.	Mohlomong. Melumo e ka ntle ho melumo ea ar eas e ka nkuoa maemong a tlase ke libaka tse sebetsang.
Na e sebelisa libaka tsa tšireletso?	Ee	Che

Ho sebelisa mokhoa o khutsitseng oa tšireletso:

1. Beha sebaka sa khaso moo u batlang ho thibela melumo e sa batleheng. Khetha sebaka sa tšireletso.
2. Kgetha Kgetha phanele ya thepa. Semumu sa poso-keiti se khutsisa molumo ofe kapa ofe ka har'a sebaka sa tšireletso.

Ho sebelisa mokhoa oa ho se be le tšireletso:

• Tsamaisa kapa u fetole boholo ba libaka tsa tšireletso tse matla ho qoba likarolo tsa kamore e nang le melumo e sa batleheng.
• Suthisa libaka tse khethehileng tsa tšireletso.
• Tsamaisa kapa u hlakole li-lobe tse ling tsa maekrofono (ha tšireletso ea othomathiki e tingoe).

Sebelisa li-Lobes tse tsitsitseng
Khaso e iketsang = E tima

• Ho sebelisa li-lobes tse tsamaisoang, tima li-automatic coverage ho Litlhophiso > Kakaretso > Ts'ebetso ea boiketsetso. U ka khona ho beha li-microphone tse ka bang 8. Mokhoa ona o nepahetse bakeng sa ha o hloka liphetho tse tobileng, joalo ka sistimi ea ho phahamisa lentsoe ea libaka tse ngata.
• Maekerofounu ha e sebelise libaka tsa khaso ha ts'ebetso ea othomathiki e tingoe.
• Sheba tataiso ea MXA910 ho ithuta haholoanyane ka ho sebelisa li-lobes.

Fetola Maemo

Pele o fetola maemo:

1. Iketsetse mokhoa oa ho mamela maekrofono ka kotloloho u sebelisa mohala oa Dante amp ® kapa ka Dante Virtual Soundcard.
2. Bula Designer 'me u fumane MXA920 lethathamong la lisebelisoa tsa inthanete. Ntle le moo, qala lisebelisoa web kopo.

Kakaretso ea Ts'ebetso e Buletsoe

1. Bua sebakeng se seng le se seng sa khaso ka molumo o tloaelehileng oa puo. O ka fetola:
   • Phaello ea sebaka sa ts'ireletso (post-heke): Ho tsoa tabeng ea Coverage, bula sebaka sa thepa ka lehlakoreng le letona. Khetha sebaka sa ts'ireletso ho bona phaello le taolo ea ho se bue.
   • IntelliMix gain (post-gate): Eya ho IntelliMix tab ya ho lokisa boemo ba automix out le ho laola maemo a DSP.
2. Fetola litlhophiso tsa EQ ha ho hlokahala. U ka sebelisa EQ ho ntlafatsa kutloisiso ea puo le ho fokotsa lerata. Haeba liphetoho tsa EQ tsa hau li baka keketseho e kholo kapa phokotso ea boemo, fetola maemo joalo ka mohato oa 1.

Ho Koaheloa ka Othomathike

Ka mokhoa ona, ho na le lihlopha tse 2 tsa li-faders tsa phaello:

• Phaello ea kanale (pele ho heke): Ho ikamahanya le maemo, ea ho liteishene. Li-fader tsena li ama phaello ea mocha pele e fihla ho "automixer" 'me ka hona li ama qeto ea mochine oa koloi. Ho eketsa phaello mona ho tla etsa hore lobe e utloe hantle mehloli ea molumo le monyetla oa ho kena. Ho theola phaello mona ho etsa hore lobe e se utloe hantle 'me ho se be bonolo ho kena. Haeba o sebelisa feela liphetho tse tobileng bakeng sa kanale e 'ngoe le e 'ngoe ntle le automixer, o hloka feela ho sebelisa li-fader tsena.
• IntelliMix phaello (post-gate): Ho fetola, ea ho IntelliMix. Ntle le moo, khetha lobe ho Coverage ho bona phaello ea kamora heke le li-control tsa limumu phanele ea thepa. Li-fader tsena li fetola phaello ea mocha ka mor'a hore lobe e bulehe. Ho fetola phaello mona ho ke ke ha ama qeto ea mochini oa li-automixer. Sebelisa li-fader tsena feela ho lokisa phaello ea sebui ka mor'a hore u khotsofatsoe ke boits'oaro ba mochini oa automixer.

U sebelisa Designer Optimize Workflow

Designer's Optimize workflow e potlakisa ts'ebetso ea ho hokahanya lits'ebetso ka bonyane maekrofounu e le 1 le processor e le 'ngoe ea molumo. Optimize e boetse e theha litsela tsa taolo e sa bueng ka likamoreng tse nang le likonopo tsa MXA tse sa bueng tsa marang-rang. Ha u khetha Optimize ka kamoreng, Moqapi o etsa se latelang:

• E etsa litselana tsa molumo le litsela tsa taolo ea limumu
• E lokisa litlhophiso tsa molumo
• Bulela khokahano ea semumu
• E nolofalletsa taolo ea lintlha tsa LED bakeng sa lisebelisoa tse sebetsang

Litlhophiso li behiloe molemong oa motsoako oa hau oa lisebelisoa. U ka etsa litlhophiso ho ea pele, empa Optimize workflow e u fa sebaka se setle sa ho qala. Ka mor'a ho ntlafatsa kamore, u lokela ho hlahloba le ho fetola litlhophiso ho lumellana le litlhoko tsa hau. Mehato ena e ka kenyelletsa:

• Ho hlakola litsela tse sa hlokahaleng.
• Ho lekola maemo le ho lokisa leruo.
• Ho netefatsa hore lipontšo tsa litšupiso tsa AEC li tsamaisoa ka nepo.
• Ho hlophisa hantle DSP ea thibela ha ho hlokahala.

Lisebelisoa tse tsamaellanang:

• MXA910
• MXA920
• MXA710
• MXA310
• P300
• Kamore ea IntelliMix
• ANIUSB-MATRIX
• MXN5-C
• Konopo ea MXA Network Mute

Ho sebelisa Optimize workflow:

1. Beha lisebelisoa tsohle tse hlokahalang ka kamoreng.
2. Khetha Optimize. Moqapi o ntlafatsa li-microphone le li-setting tsa DSP bakeng sa motsoako oa lisebelisoa tsa hau.

Khutsa Sync

• Khokahano e khutsitseng e etsa bonnete ba hore lisebelisoa tsohle tse hokahantsoeng ka har'a sistimi ea lipuisano lia khutsa kapa li khutsitse ka nako e le 'ngoe le sebakeng se nepahetseng tseleng ea matšoao. Boemo ba ho khutsisa bo hokahanngoa ho lisebelisoa ho sebelisoa matshwao a utloahalang kapa likhokahano tsa USB.
• Ho sebelisa khokahano e khutsitseng, etsa bonnete ba hore logic e lumelletsoe lisebelisoa tsohle.
• Designer's Optimize workflow e lokisetsa litlhophiso tsohle tse hlokahalang tsa sync bakeng sa hau.

Lisebelisoa tse lumellanang tsa Shure logic:

• P300 (Hape e khutsisa li-codec tse bonolo tse hoketsoeng ke USB)
• ANIUSB-MATRIX (Hape e khutsisa li-codec tse bonolo tse hoketsoeng ke USB)
• Software ea IntelliMix Room (E boetse e khutsisa li-codec tse bonolo tse hoketsoeng ke USB)
• MXA910
• MXA920
• MXA710
• MXA310
• Konopo ea Mute ea Network
• ANI22-THIBELA
• ANI4IN-THIBELA
• Li-microphone tse nolofalitsoeng tsa MX tse hokahaneng le ANI22-BLOCK kapa ANI4IN-BLOCK
  • MX392
  • MX395-LED
  • MX396
  • MX405/410/415

Ho sebelisa khokahano e khutsitseng, tsamaisa lets'oao la maekerofounu ho processor e butsoeng (P300, ANIUSBMATRIX, kapa IntelliMix Room software). Li-microphone li lula li buletsoe logic. Ho fumana thuso ka ho kenya tšebetsong khokahanyo e khutsitseng, bona Lipotso tsa rona.

Ho kenya

Mokhoa oa ho kenya MXA920

Ho na le mekhoa e mengata ea ho kenya li-microphone tsa MXA920. Sheba ka tlase bakeng sa lintlha tse mabapi le likhetho tsa ho hlongoa le lisebelisoa bakeng sa li-microphone tsa lisekoere le tse chitja.

Tlhophiso Mekhoa e Metle ka ho Fetisisa

• Se ke oa beha maekrofono ka morao ho litšitiso.
• Tšireletso e itšetlehile ka molumo oa kamore ea hau, kaho le lisebelisoa. Ela hloko lintlha tsena ha u rera.
• Bakeng sa likamore tse ngata, Shure e khothaletsa maoto a 12 (limithara tse 3.7) joalo ka bophahamo bo phahameng ka ho fetesisa.

Likhetho tsa ho kenya sekwere:

• Ka marang-rang a siling
• E na le sesebelisoa sa ho kenya VESA
• Ka palo ea NPT
• Emisa siling ka A900-GM
• Emisa siling ka lisebelisoa tsa hau
• Ka 3/8-inch thupa e khoele
• Siling e thata

Likhetho tsa ho roala ho pota-pota:

• E na le sesebelisoa sa ho kenya VESA
• Ka palo ea NPT
• Emisa siling ka A900-GM
• Emisa siling ka lisebelisoa tsa hau
• Ka 3/8-inch thupa e khoele

Ho kenya Grid ea Ceiling
Pele o qala:

• Tlosa sekoahelo sa polasetiki ho maekerofounu.
• Haeba u sebelisa, kenya li-pads tsa rabara lihukung tsa maekrofono ho thibela mengoallo.
• Etsa bonnete ba hore boholo ba gridi ea siling e lumellana le mefuta ea hau ea mohlala.
• Haeba u sebelisa lebokose la mateano la A910-JB, le kenye pele u kenya siling.

BOHLOKOA: Se ke oa kenya mohlala oa 60 cm ho grid ea siling ea maoto a mabeli (2 mm).

1. Etsa sebaka ka har'a keriti ea siling hore maekerofounu e hlophisitsoeng e kenngoe.
2. Tsamaisa thapo ea Ethernet ka holim'a marang-rang a siling le ka lesoba le siling.
3. Hokela thapo ea Ethernet ho maekerofounu.
4. Hokela mohala oa polokeho lipakeng tsa sebopeho sa moaho le e 'ngoe ea lintlha tse tlamang ka morao ho maekrofono o sebelisa thapo e lohiloeng ea tšepe kapa terata e 'ngoe e matla haholo (e sa kenyellelitsoeng). Mokhoa ona oa tšireletso o thibela microphone ho oela maemong a tšohanyetso. Etsa bonnete ba hore ha ho na tsitsipano holim'a tether ea polokeho. Latela melao efe kapa efe ea lehae.
5. Kenya microphone ka har'a marang-rang a siling.

Ho kenya Sesebelisoa sa Junction Box
Lebokose la kopanelo la A910JB le hloella holim'a li-microphone tsa lisekoere tsa siling ho hokahanya kotopo. Ho na le li-knockout tse 3 lebokoseng la mateano bakeng sa ho hokela conduit. Sheba melao ea lehae ho fumana hore na lebokose la mateano lea hlokahala.
Hlokomela: Kenya lebokose la mateano maekerofounu pele u kenya microphone siling.

Ho kenya:

1. Tlosa kokota eo u rerang ho e sebelisa lebokoseng la mateano.
2. Tlosa li-screw tse 4 ho maekerofounu joalo ka ha ho bonts'itsoe.
3. Lokisetsa lebokose la mateano le masoba a screw. Haeba ho khoneha, hokela thapo ea marang-rang ka har'a maekrofono pele u boloka lebokose la mateano.
4. Kenya li-screw tse 4 hape ho boloka lebokose la mateano ho maekrofono.

VESA Standardized Mounting

Letlapa le ka morao le na le masoba a 4 a khoele bakeng sa ho hokela maekerofounu ho sesebelisoa sa VESA. Likoti tse ntseng li eketseha li latela maemo a VESA MIS-D:

• Tlhaloso ea Screw: Khoele ea M4 (botebo ba lesoba = 9.15 mm)
• Sekoti sekoti: 100 mm lisekoere

Likoti tse kenyang VESA li sebetsa le lisebelisoa tsa Shure's A900-PM le A900-PM-3/8IN ho beha maekrofono palong.

Ho emisa ho tloha Siling

Emisa maekerofounu o sebelisa lisebelisoa tsa hau, kapa ka Shure's A900-GM kit (e kenyelletsa likhoele tse ntseng li hola le lihakisi).
Ho sebelisa lisebelisoa tsa hau, o tla hloka:

• Mohala oa tšepe o lohiloeng kapa terata e matla haholo
• Hardware ho hokela thapo siling

1. Hokela lithapo tse holimang ho likurufu tsa eyelet tse bophara ba 12 mm ho maekerofounu.
2. Tlanya lithapo ho siling u sebelisa thepa e loketseng.

Ho qhoma siling ka thata
O ka kenya li-microphone tsa siling tse lisekoere ka har'a siling e thata ntle le gridi ea lithaele u sebelisa sesebelisoa sa A910-HCM. Ithute haholoanyane ho www.shure.com.

Likanale tsa Dante
Setlhophiso sa tšireletso ea othomathike se fetola palo ea liphetho tsa Dante ho MXA920.
Kakaretso ea Ts'ebetso e Buletsoe

• 1 automix tlhahiso e nang le IntelliMix DSP bakeng sa libaka tsohle tsa tšireletso
• Kenyelletso ea litšupiso tsa 1 AEC

Hlokomela: Ha ts'ebetso ea othomathiki e buletsoe, Dante Controller e bonts'a liteishene tse 8 tsa phetisetso le tlhahiso ea automix. Automix output ke eona feela mocha o romellang molumo o nang le ts'ebetso ea othomathiki.
Ho Koaheloa ka Othomathike
Ho fihla ho tse 8 tse arohaneng tsa Dante (1 bakeng sa lobe ka 'ngoe)

• 1 tlhahiso ea automix e nang le IntelliMix DSP
• Kenyelletso ea litšupiso tsa 1 AEC

IntelliMix DSP
Sesebelisoa sena se na le li-block tsa IntelliMix tsa digital processing signal tse ka sebelisoang tlhahisong ea microphone. Li-block tsa DSP li kenyelletsa:

• Tlhakolo ea Acoustic echo (AEC)
• Jarolla ka ho iketsa phaello (AGC)
• Phokotso ea lerata
• Sekontiri
• tieho

Ho fihlella, e ea ho "IntelliMix" tab.

Mekhoa e Molemo ka ho Fetisisa ea DSP

• Kenya li-block tsa DSP ha ho hlokahala. Etsa tlhahlobo ea sistimi ea hau ntle le DSP, ebe u eketsa ts'ebetso kamoo ho hlokahalang ho lokisa litaba life kapa life tseo u li utloang lets'oao la molumo.
• Ntle le haeba o kopana le video e salletseng morao ho audio, emisa tieho.

Ho hlakola ha Acoustic Echo
Kopanong ea molumo, sebui se hole se ka utloa molumo oa lentsoe la sona ka lebaka la maekerofounu e haufi le ho qetela e nkang molumo ho tsoa ho libuela-hōle. Acoustic echo cancellation (AEC) ke algorithm ea DSP e khethollang lets'oao le hole le ho le thibela ho ts'oaroa ke maekrofono ho fana ka puo e hlakileng, e sa sitisoeng. Nakong ea mohala oa kopano, AEC e sebetsa khafetsa ho ntlafatsa ts'ebetso ha feela molumo oa ho qetela o le teng. Ha ho khonahala, ntlafatsa tikoloho ea acoustic u sebelisa malebela a latelang:

• Fokotsa molumo oa sebui
• Boemo ba libui hole le li-microphone
• Qoba ho supa libui ka kotloloho libakeng tse koahelang maekrofono

Ho khetha Letšoao la Referense bakeng sa AEC
Ho etsa kopo ea AEC, fana ka lets'oao la litšupiso tse hole. Bakeng sa liphetho tse ntle, sebelisa lets'oao le fepelang sistimi ea hau ea lehae ea matlafatso.

• P300: Eya ho Schematic mme o tobetse thibela efe kapa efe ea AEC. Khetha mohloli oa litšupiso, 'me mohloli oa litšupiso o fetoha bakeng sa li-block tsohle tsa AEC.
• MXA910, MXA920, MXA710: Tsamaisa lets'oao la ho qetela ho kanale ea AEC Reference In.
• Kamore ea IntelliMix: Eya ho Schematic ebe o tobetsa block ea AEC. Khetha mohloli oa litšupiso. Sebaka se seng le se seng se ka sebelisa mohloli o fapaneng oa litšupiso, kahoo beha referense bakeng sa thibelo e 'ngoe le e' ngoe ea AEC. Designer's Optimize workflow e iketsetsa mohloli oa litšupiso oa AEC, empa ke mohopolo o motle ho hlahloba hore na Moqapi o khetha mohloli oa litšupiso oo o batlang ho o sebelisa.

Litlhophiso tsa AEC

• Meter ea litšupiso
  • Sebelisa metara ea litšupiso ho netefatsa hore letshwao la ts'upiso le teng. Letšoao la referense ha lea lokela ho khephoha.
• ERLE
  • Ntlafatso ea ho khutlisa tahlehelo ea Echo (ERLE) e bonts'a boemo ba dB ba phokotso ea matšoao (palo ea echo e tlosoa). Haeba mohloli oa litšupiso o hokahane hantle, ts'ebetso ea metara ea ERLE ka kakaretso e tsamaellana le mitara oa litšupiso.
• Referense
  • E bontša hore na ke mocha ofe o sebetsang e le lets'oao la ho supa qetellong.
• Eo e seng guttate Processing
  • Karolo ea mantlha ea acoustic echo canlerler ke sefahleho se fetohang. Ts'ebetso e sa ts'oaneng le mochini e tlatselletsa seletsa se fetohang ho tlosa molumo o mong le o mong oa masalla o bakoang ke ho se ts'oane hoa acoustic kapa liphetoho tikolohong. Sebelisa maemo a tlase ka ho fetisisa a ka sebetsang ka kamoreng ea hau.
• Tlase: Sebelisa likamoreng tse nang le li-acoustics tse laoloang le li-echoes tse fokolang. Tlhophiso ena e fana ka molumo oa tlhaho ka ho fetesisa bakeng sa duplex e felletseng.
• Mahareng: Sebelisa likamoreng tse tloaelehileng e le sebaka sa ho qala. Haeba u utloa li-artifacts tsa echo, leka ho sebelisa maemo a holimo.
• Holimo: Sebelisa ho fana ka phokotso e matla ea echo ka likamoreng tse nang le li-acoustics tse mpe, kapa maemong ao tsela ea echo e fetohang khafetsa.

Phokotso ea Lerata
Phokotso ea lerata e fokotsa haholo palo ea lerata le ka morao ho lets'oao la hau le bakoang ke liprojeke, lits'ebetso tsa HVAC, kapa mehloli e meng ea tikoloho. Ke processor e matla, e lekanyang mokato oa lerata ka phapusing mme e tlosa lerata ho pholletsa le pono eohle ka pepenene e phahameng.
Litlhophiso
Sethala sa phokotso ea lerata (tlase, bohareng, kapa holimo) se emela palo ea phokotso ho dB. Sebelisa maemo a tlase ka ho fetisisa a ka fokotsang lerata ka kamoreng.
Taolo e Ikemetseng ea ho Fumana (AGC)
Taolo ea ho fumana ka bo eona e ikamahanya le maemo a liteishene ho netefatsa molumo o tsitsitseng oa batho bohle ba buang, maemong ohle. Bakeng sa mantsoe a khutsitseng, ho eketsa phaello; bakeng sa mantsoe a phahameng, e kokobetsa molumo. Lumella AGC ho likanale moo sebaka se pakeng tsa sebui le maekrofono se ka fapanang, kapa likamoreng tseo batho ba bangata ba fapaneng ba tla sebelisa sistimi ea liboka. Taolo ea ho fumana ka boits'oaro e etsahala kamora heke (ka mor'a automixer), 'me e ke ke ea ama ha liheke tsa automixer li tima kapa li tima.

Nete ​​e lebisitsoeng (dBFS)
Sebelisa -37 dBFS e le qalo ea ho etsa bonnete ba hore ho na le ntlo ea hlooho e lekaneng, 'me u lokise ha ho hlokahala. Sena se emela boemo ba RMS (karolelano), bo fapaneng le ho beha fader ea ho kenya ho latela maemo a holimo ho qoba ho fokotsa.
Boima bo phahameng (dB)
E beha palo e phahameng ea phaello e ka sebelisoang
Palo e kahodimodimo Cut (dB)
E beha khakanyo e phahameng e ka sebelisoang
Keletso: Sebelisa meter ea boost/cut ho lekola palo ea phaello e kentsoeng kapa e tlositsoeng ho lets'oao. Haeba mitha ena e lula e fihla boemong bo phahameng ka ho fetisisa ba boost kapa sehiloeng, nahana ka ho fetola fader ea ho kenya hore lets'oao le be haufi le boemo ba sepheo.

tieho

• Sebelisa tieho ho amahanya mamelwang le video. Ha sistimi ea video e hlahisa latency (moo u utloang motho e mong a bua, 'me melomo ea bona e tsamaea hamorao), eketsa ho lieha ho hokahanya molumo le video.
• Ho lieha ho lekantsoe ka milliseconds. Haeba ho na le phapang e kholo lipakeng tsa audio le video, qala ka ho sebelisa linako tse kholo tsa nako ea ho lieha (500-1000 ms). Ha molumo le video li sa lumellane hanyane hanyane, sebelisa linako tse nyane ho hlophisa hantle.

Sekontiri
Sebelisa konpresser ho laola mefuta e matla ea lets'oao le khethiloeng.

Moeko
Ha lets'oao la molumo le feta boleng ba moeli, boemo bo fokotseha ho thibela li-spikes tse sa batleheng ho lets'oao la tlhahiso. Palo ea phokotso e khethoa ke boleng ba karolelano. Etsa tlhahlobo ea molumo 'me u behe moeli oa 3-6 dB ka holim'a maemo a tloaelehileng a motho ea buang, kahoo compressor e theola melumo e phahameng e sa lebelloang feela.
Karolelano
Karolelano e laola hore na lets'oao le fokotsehile hakae ha le feta boleng ba moeli. Likarolo tse phahameng li fana ka phokotso e matla. Karolelano e tlase ea 2: 1 e bolela hore bakeng sa 2 dB e 'ngoe le e' ngoe lets'oao le fetang moeli, lets'oao la tlhahiso le tla feta feela monyako ka 1 dB. Karo-karolelano e phahameng ea 10: 1 e bolela molumo o phahameng o fetang moeli ka 10 dB o tla feta feela moeli ka 1 dB, ka katleho o fokotsa pontšo ka 9 dB.

Tekanyo ea Parametric
Phahamisa boleng ba molumo ka ho fetola karabelo ea makhetlo le parametric equalizer.
Likopo tse tloaelehileng tsa ho lekanya:

• Ntlafatsa ho khona ho bua
• Fokotsa lerata ho tsoa litsing tsa HVAC kapa liprojekere tsa video
• Fokotsa litšitiso tsa kamore
• Fetola karabelo ea maqhubu bakeng sa lits'ebetso tsa matlafatso

Ho beha Mefuta ea Filter
Fetola li-setting ka ho qhekella lits'oants'o ho graph ea frequency frequency, kapa ka ho kenya linomoro tsa linomoro. Thibela filtara u sebelisa lebokose la ho hlahloba haufi le sefe.

Mofuta oa Sefe	Ke sehlopha sa pele le sa ho qetela feela tse nang le mefuta e ka khethoang ea sefe. Parametric: E kokobetsa kapa e matlafatsa lets'oao ka har'a sebaka seo u ka se khonang Low Cut: E theola lets'oao la molumo ka tlase ho maqhubu a khethiloeng Shelf e tlase: E kokobetsa kapa e matlafatsa lets'oao la molumo ka tlase ho maqhubu a khethiloeng High Cut: E tima leqhubu la molumo ka holim'a maqhubu a khethiloeng Shelf e Phahameng: E kokobetsa kapa e matlafatsa leqhubu la molumo ka holim'a maqhubu a khethiloeng
Khafetsa	Kgetha maqhubu a bohareng a sefe seo o ka se kgaolang/ho matlafatsa
Fumana	E fetola boemo bakeng sa sefe e itseng (+/- 30 dB)
Q	E fetola mefuta e mengata ea maqhubu a anngoeng ke sefe. Ha boleng bona bo ntse bo eketseha, bandwidth e ntse e fokotseha.
Bophara	E fetola mefuta e mengata ea maqhubu a anngoeng ke sefe. Theko e hlahisoa ka li-octave. Hlokomela: likarolo tsa Q le bophara li ama lebelo la ho lekana ka tsela e ts'oanang. Phapang feela ke tsela eo litekanyetso li emeloang ka eona.

Kopitsa, peista, kenya, 'me Export Equalizer Channel Litlhophiso
Lintlha tsena li etsa hore ho be bonolo ho sebelisa li-setting tse lekanang tsa ho lekanya ho tloha ts'ebetsong e fetileng, kapa ho potlakisa nako ea phetolo.
Kopitsa le ho Peista
Sebelisa ho kenya peek e tšoanang ea PEQ kapele ho liteishene tse ngata.

1. Khetha kanale ho tsoa ho li-menu tse hulang ka skrineng sa PEQ.
2. Khetha Copy
3. Lenaneng la ho hula, khetha kanale ho kenya maemo a PEQ ebe o khetha ho peista.

Ho Kenya le ho Romela kantle
Sebelisa ho boloka le ho kenya litlhophiso tsa PEQ ho tsoa ho file khomphuteng. Sena se na le thuso bakeng sa ho theha laebrari ea litlhophiso tse ka sebelisoang hape files ho likhomphutha tse sebelisetsoang ho kenya sistimi.

Export	Kgetha kanale ho boloka tlhophiso ya PEQ, ebe o kgetha Export to file.
Kenya	Kgetha kanale ho kenya tlhophiso ya PEQ, ebe o kgetha Import ho tswa ho file.

Likopo tsa Equalizer
Li-acoustics tsa kamore ea liboka li fapana ho latela boholo ba kamore, sebopeho le thepa ea kaho. Sebelisa litataiso tafoleng e latelang.

Sesebelisoa sa EQ	Litlhophiso tse sisintsoeng
Treble boost bakeng sa kutloisiso e ntlafalitsoeng ea puo	Kenya shelf e phahameng ho matlafatsa maqhubu a fetang 1 kHz ka 3-6 dB
Phokotso ea lerata ea HVAC	Kenya filthara e sehiloeng tlase ho fokotsa maqhubu a ka tlase ho 200 Hz
Fokotsa molumo oa molumo oa molumo le ho hlaka	Hlalosa mofuta o ikhethileng oa maqhubu a "thabisang" kamore: 1. Beha boleng ba Q bo moqotetsane 2. Eketsa phaello ho pakeng tsa +10 le +15 dB, 'me u leke ka maqhubu a pakeng tsa 1 kHz le 6 kHz ho supa mefuta e fapaneng ea molumo oa molumo oa flutter kapa sibi lance. 3. Fokotsa phaello ka maqhubu a khethiloeng (qala pakeng tsa -3 le -6 dB) ho fokotsa molumo o sa batleheng oa kamoreng.
Fokotsa molumo o sa utloahaleng oa kamore	Hlalosa mofuta o ikhethileng oa maqhubu a "thabisang" kamore: 1. Beha boleng ba Q bo moqotetsane 2. Eketsa phaello ho pakeng tsa +10 le +15 dB, 'me u leke ka maqhubu a pakeng tsa 300 Hz le 900 Hz ho supa maqhubu a resonant.

Sesebelisoa sa EQ	Litlhophiso tse sisintsoeng
	3. Fokotsa phaello ka maqhubu a khethiloeng (qala pakeng tsa -3 le -6 dB) ho fokotsa molumo o sa batleheng oa kamoreng.

EQ Contour
Sebelisa EQ contour ho kenya filthara e phahameng kapele ho 150 Hz ho lets'oao la maekerofounu. Khetha EQ contour ho e bulela kapa ho e tima.

Koetliso

• Molaetsa o patiloe ka mokhoa oa Advanced Encryption Standard (AES-256), joalo ka ha ho hlalositsoe ke Setsi sa Naha sa 'Muso oa US.
• Phatlalatso ea Maemo le Theknoloji (NIST) FIPS-197. Shure lisebelisoa tse tšehetsang encryption li hloka poleloana ea lekunutu ho etsa khokahano. Encryption ha e sebetse ka lisebelisoa tsa batho ba bang.
• Ho Moqapi, o ka khona ho etsa encryption bakeng sa lisebelisoa tsohle tse ka phapusing e phelang: [Kamore ea hau] > Litlhophiso > Encryption ea molumo.

Ho kenya tshebetsong encryption ho web kopo:

• Eya ho Litlhophiso> Koetliso ea molumo> Nolofatsa encryption.
• Kenya poleloana. Lisebelisoa tsohle li tlameha ho sebelisa poleloana e tšoanang ho theha khokahano e patiloeng.

Bohlokoa: Hore encryption e sebetse:

• Lisebelisoa tsohle tsa Shure marang-rang a hau li tlameha ho sebelisa encryption.
• Tlosa AES67 ho Dante Controller. AES67 le AES-256 li ke ke tsa sebelisoa ka nako e le 'ngoe.

Mekhoa e Molemo ka ho Fetisisa ea Marang-rang

Ha o hokela lisebelisoa tsa Shure marang-rang, sebelisa mekhoa e latelang e metle:

• Kamehla sebelisa topology ea "naleli" ea marang-rang ka ho hokela sesebelisoa ka seng ho switjha kapa router.
• Hokela lisebelisoa tsohle tsa marang-rang tsa Shure ho netweke e le 'ngoe ebe u seta ho subnet e tšoanang.
• Lumella software eohle ea Shure ka firewall khomphuteng ea hau.
• Sebelisa feela 1 DHCP seva ka marang-rang. Tlosa aterese ea DHCP ho li-server tse ling.
• Matla ho switch le seva sa DHCP pele o kenya lisebelisoa tsa Shure.
• Ho holisa marang-rang, sebelisa li-switches tse ngata ho topology ea linaleli.
• Lisebelisoa tsohle li tlameha ho ba boemong bo tšoanang ba ntlafatso ea firmware.

Likhothaletso tsa switch le Cable bakeng sa Dante Networking

• Li-switches le lithapo li laola hore na netweke ea hau ea molumo e sebetsa hantle hakae. Sebelisa boleng bo holimo
• li-switches le likhoele ho etsa hore marang-rang a hau a mamelwang a tšepahale haholoanyane.

Li-switches tsa netweke li lokela ho ba le:

• Likou tsa Gigabit. Li-switch tse 10/100 li ka sebetsa ho marang-rang a manyane, empa li-switches tsa gigabit li sebetsa betere.
• Matla holim'a Ethernet (PoE) kapa likoung tsa PoE+ bakeng sa lisebelisoa life kapa life tse hlokang matla
• Likarolo tsa taolo ho fana ka tlhaiso-leseling mabapi le lebelo la koung, libali tsa liphoso, le bandwidth e sebelisitsoeng
• Bokhoni ba ho tima Energy Efficient Ethernet (EEE). EEE (eo hape e tsejoang e le "Green Ethernet") e ka baka ho theoha ha molumo le mathata a ho amahanya oache.
• Diffserv (DSCP) Quality of Service (QoS) e tlang pele ka thata le mela e 4

Lithapo tsa Ethernet li lokela ho ba:

• Cat5e kapa ho feta
• Sireletsa

Bakeng sa lintlha tse ling, bona FAQ ea rona mabapi le li-switches tseo u ka li qobang.

Sesebelisoa sa IP Configuration
Sesebelisoa sena sa Shure se sebelisa liaterese tse 2 tsa IP: e 'ngoe bakeng sa taolo ea Shure, le e' ngoe bakeng sa molumo le taolo ea Dante.

• Shure control
  • E na le datha bakeng sa software ea taolo ea Shure, liapdeite tsa firmware, le sistimi ea motho oa boraro (joalo ka AMX kapa Crestron)
• Dante audio le taolo
  • E na le data ea Dante digital audio le taolo bakeng sa Dante Controller
  • E hloka khokahano ea terata, ea gigabit Ethernet hore e sebetse

Ho fihlella litlhophiso tsena ho Moqapi, ea ho [Sesebelisoa sa hau] > Litlhophiso > Tokiso ea IP.

Ho beha Latency

• Latency ke nako ea nako eo lets'oao le tsamaeang ho pholletsa le sistimi ho ea ho liphetho tsa sesebelisoa.
• Ho ikarabella bakeng sa phapang ea nako ea latency lipakeng tsa lisebelisoa le liteishene, Dante o na le khetho e reriloeng esale pele ea litlhophiso tsa latency. Ha tlhophiso e tšoanang e khethoa, e netefatsa hore lisebelisoa tsohle tsa Dante marang-rang lia lumellana.
• Litekanyetso tsena tsa latency li lokela ho sebelisoa e le qalo. Ho tseba nako e nepahetseng eo u ka e sebelisang bakeng sa ho seta ha hao, tsamaisa setup, romela molumo oa Dante pakeng tsa lisebelisoa tsa hau, 'me u lekanye latency ea sebele tsamaisong ea hau u sebelisa software ea Audinate's Dante Controller.
• Ebe u lebisa ho tlhophiso ea latency e haufinyane e fumanehang, 'me u sebelise eona.
• Sebelisa software ea Audinate's Dante Controller ho fetola litlhophiso tsa latency.

Litlhahiso tsa Latency

Latency Setting	Boholo ba Nomoro ea Liphetoho
0.25 ms	3
0.5 ms (ea kamehla)	5
1 ms	10
2 ms	10+

QoS (Boleng ba Tšebeletso) Litlhophiso
Litlhophiso tsa QoS li fana ka lintho tse tlang pele ho lipakete tse khethehileng tsa data marang-rang, ho netefatsa hore ho tsamaisoa ha molumo ho tšepahalang ho marang-rang a maholo a nang le sephethephethe se boima. Karolo ena e fumaneha ho li-switches tse ngata tse laoloang. Leha ho sa hlokahale, ho abela litlhophiso tsa QoS ho khothaletsoa.
Hlokomela: Kopanya liphetoho le mookameli oa marang-rang ho qoba ho sitisa tšebeletso. Ho abela litekanyetso tsa QoS, bula sebopeho sa switjha 'me u sebelise tafole e latelang ho abela litekanyetso tsa queue tse amanang le Dante.

• Abela boleng bo phahameng ka ho fetisisa bo ka khonehang (bo bontšitsoeng e le 4 ho example) bakeng sa liketsahalo tsa bohlokoa tsa nako ea PTP
• Sebelisa litekanyetso tse theohang tsa bohlokoa bakeng sa pakete ka 'ngoe e setseng.

Dante QoS Boleng ba Bohlokoa

Ea pele	Tšebeliso	Letšoao la DSCP	Hex	Decimal	Binary
Holimo (4)	Liketsahalo tsa PTP tsa bohlokoa ka nako	CS7	0x38	56	111000
Mahareng (3)	Audio, PTP	EF	0x2E	46	101110
Tlase (2)	(behiloe)	CS1	0x08	8	001000
Ha ho letho (1)	Sephethephethe se seng	Molemo ka ho Fetisisa	0x00	0	000000

Hlokomela: Tsamaiso ea switjha e ka fapana ho ea ka moetsi le mofuta oa switjha. Sheba tataiso ea lihlahisoa tsa moetsi bakeng sa lintlha tse khethehileng tsa tlhophiso. Ho fumana lintlha tse ling mabapi le litlhoko tsa Dante le marang-rang, etela Www.audinate.com.
Mareo a Marang-rang

• PTP (Precision Time Protocol): E sebelisoa ho hokahanya lioache marang-rang
• DSCP (Differentiated Services Code Point): Mokhoa o hlophisitsoeng oa boitsebahatso bakeng sa data e sebelisitsoeng boemong ba pele ba 3 QoS

Likoung tsa IP le Protocol
Taolo ea Shure

Boema-kepe	TCP/UDP	Protocol	Tlhaloso	Feme De phoso
21	TCP	FTP	E hlokahala bakeng sa lisebelisoa tsa firmware (ho seng joalo li koetsoe)	E koetsoe
22	TCP	SSH	Sebopeho se sireletsehileng sa Shell	E koetsoe
23	TCP	Telnet	Ha e tšehetsoe	E koetsoe
53	UDP	DNS	Sistimi ea Lebitso la Domain	E koetsoe
67	UDP	DHCP	Protocol ea Tlhophiso ea Moamoheli ea Matla	Bula
68	UDP	DHCP	Protocol ea Tlhophiso ea Moamoheli ea Matla	Bula
80*	TCP	HTTP	Hoa hlokahala ho qala e kenyelelitsoe web seva	Bula
443	TCP	HTTPS	Ha e tšehetsoe	E koetsoe
2202	TCP	ASCII	E hlokahala bakeng sa likhoele tsa taolo ea mokha oa boraro	Bula
5353	UDP	mDNS†	E hlokahala bakeng sa ho sibolla sesebelisoa	Bula
5568	UDP	SDT (multicast)†	E hlokahala bakeng sa puisano ea li-inter-device	Bula
57383	UDP	SDT (unicast)	E hlokahala bakeng sa puisano ea li-inter-device	Bula
8023	TCP	Telnet	Sebopeho sa sebopeho sa Debug	E koetsoe
8180	TCP	HTML	E hlokehang bakeng sa web sesebelisoa (firmware ea lefa feela)	Bula

Boema-kepe	TCP/UDP	Protocol	Tlhaloso	Feme De phoso
8427	UDP	SLP (multicast)†	E hlokahala bakeng sa puisano ea li-inter-device	Bula
64000	TCP	Telnet	E hlokahala bakeng sa ntlafatso ea Shure firmware	Bula

• Likou tsena li tlameha ho buloa ho PC kapa sistimi ea taolo ho fihlella sesebelisoa ka firewall.
• Li-protocol tsena li hloka multicast. Netefatsa hore multicast e hlophisitsoe hantle bakeng sa marang-rang a hau.
• Sheba ea Audinate websebaka sa marang-rang bakeng sa tlhahisoleseling mabapi le likou le liprothokholo tse sebelisoang ke molumo oa Dante.

Digital Audio Networking

• Molumo oa Dante oa digital o tsamaisoa ka holim'a Ethernet e tloaelehileng 'me o sebetsa ka mekhoa e tloaelehileng ea marang-rang. Dante e fana ka latency e tlase, khokahano ea oache e tiileng, le boleng bo holimo baService
• (QoS) ho fana ka lipalangoang tsa molumo tse tšepahalang ho lisebelisoa tse fapaneng tsa Dante.
• Molumo oa Dante o ka phela hammoho ka mokhoa o sireletsehileng marang-rang a tšoanang le a IT le ho laola data, kapa o ka lokisetsoa ho sebelisa marang-rang a inehetseng.

Ts'ebetsong le Dante Domain Manager

Sesebelisoa sena se sebelisana le Dante Domain Manager software (DDM). DDM ke software ea taolo ea marang-rang e nang le netefatso ea basebelisi, ts'ireletso e thehiloeng ho karolo, le likarolo tsa tlhahlobo ea marang-rang a Dante le lihlahisoa tse nolofalitsoeng ke Dante. Lintlha tse mabapi le lisebelisoa tsa Shure tse laoloang ke DDM:

• Ha o kenya lisebelisoa tsa Shure domeineng ea Dante, etsa hore molaoli oa lehae a fihlelle ho Bala Ngola. Ho seng joalo, u ke ke ua khona ho fihlella litlhophiso tsa Dante, ho etsa reset ea feme, kapa ho ntlafatsa firmware ea sesebelisoa.
• Haeba sesebelisoa le DDM li sa khone ho buisana ka marang-rang ka lebaka lefe kapa lefe, u ke ke ua khona ho laola li-setting tsa Dante, ho etsa reset ea feme, kapa ho ntlafatsa firmware ea sesebelisoa. Ha khokahano e ts'oaroa bocha, sesebelisoa se latela leano le behiloeng bakeng sa eona sebakeng sa Dante.
• Haeba senotlolo sa sesebelisoa sa Dante se butse, DDM ha e sebetse, kapa peakanyo ea sesebelisoa e setetsoe ho Thibela, li-setting tse ling tsa sesebelisoa lia tingoa.
• Tsena li kenyelletsa: Encryption ea Dante, mokhatlo oa MXW, sebatli sa AD4 Dante le Dante cue, le khokahano ea SCM820.
• Bona Litokomane tsa Dante Domain Manager bakeng sa tlhaiso-leseling e batsi.

Dante e Phalla bakeng sa Shure Devices

• Ho phalla ha Dante hoa etsoa neng kapa neng ha u tsamaisa molumo ho tloha sesebelisoa se seng sa Dante ho ea ho se seng.
• Phallo e le 'ngoe ea Dante e ka ba le liteishene tsa audio tse fihlang ho tse 4. Bakeng sa mohlalaample: ho romella liteishene tsohle tse 5 tse fumanehang ho tloha MXA310 ho sesebelisoa se seng ho sebelisa 2 Dante flow, hobane phallo e le 'ngoe e ka ba le liteishene tse 1.
• Sesebelisoa se seng le se seng sa Dante se na le palo e ikhethileng ea phetisetso ea phallo le ho amohela phallo. Palo ea phallo e khethoa ke bokhoni ba sethala sa Dante.
• Litlhophiso tsa phetisetso ea Unicast le multicast le tsona li ama palo ea phallo ea Dante eo sesebelisoa se ka e romellang kapa sa e amohela. Ho sebelisa phetiso ea multicast ho ka thusa ho hlola mefokolo ea phallo ea unicast.
• Lisebelisoa tsa Shure li sebelisa liforomo tse fapaneng tsa Dante:

Sethala sa Dante	Shure Devices Sebelisa Plat sebopeho	Unicast Transmit Flow Limit	Unicast Fumana Moeli oa Phallo
Brooklyn II	ULX-D, SCM820, MXWAPT, MXWANI, P300, MXCWWAPT	32	32

Sethala sa Dante	Shure Devices Sebelisa Plat sebopeho	Unicast Transmit Flow Limit	Unicast Fumana Moeli oa Phallo
Brooklyn II (ntle le SRAM)	MXA920, MXA910, MXA710, AD4	16	16
Ultimo/UltimoX	MXA310, ANI4IN, ANI4OUT, ANIUSB-MATRIX, ANI22, MXN5-C	2	2
DAL	Kamore ea IntelliMix	16	16

AES67
AES67 ke maemo a mamelwang a marang-rang a lumellang puisano lipakeng tsa likarolo tsa Hardware tse sebelisang mahlale a fapaneng a audio a IP. Sesebelisoa sena sa Shure se tšehetsa AES67 bakeng sa ho lumellana ho eketsehileng ka har'a mekhoa ea marang-rang bakeng sa molumo o phelang, lisebelisoa tse kopantsoeng, le lisebelisoa tsa ho phatlalatsa.
Lintlha tse latelang li bohlokoa ha u fetisa kapa u amohela matšoao a AES67:

• Ntlafatsa software ea Dante Controller ho mofuta o mocha o fumanehang ho netefatsa hore tabo ea tlhophiso ea AES67 ea hlaha.
• Pele o bulela kapa o tima encryption, o tlameha ho tima AES67 ho Dante Controller.
• AES67 ha e khone ho sebetsa ha sesebelisoa se fetisa le ho amohela lisebelisoa ka bobeli li tšehetsa Dante.

Shure Device Supports:	Sesebelisoa sa 2 sea tšehetsa:	Tšebelisano ea AES67
Dante le AES67	Dante le AES67	Che. E tlameha ho sebelisa Dante.
Dante le AES67	AES67 ntle le Dante. Protocol efe kapa efe e 'ngoe ea marang-rang ea au dio e ea amoheleha.	Ee

Phallo e arohaneng ea Dante le AES67 e ka sebetsa ka nako e le 'ngoe. Palo eohle ea phallo e khethoa ke moeli o moholo oa phallo ea sesebelisoa.
Ho romella Audio ho tsoa ho sesebelisoa sa Shure
Litlhophiso tsohle tsa AES67 li laoloa ho software ea Dante Controller. Bakeng sa tlhaiso-leseling e batsi, sheba Tataiso ea mosebelisi ea Dante Controller.

1. Bula sesebelisoa sa ho fetisa sa Shure ho Dante Controller.
2. Thusa AES67.
3. Qala hape sesebelisoa sa Shure.
4. Theha AES67 ho latela litaelo tse ho Tataiso ea mosebelisi ea Dante Controller.

Ho Fumana Audio ho tsoa ho Sesebelisoa ho Sebelisa Protocol ea Audio Network e fapaneng
Lisebelisoa tsa mokha oa boraro: Ha hardware e tšehetsa SAP, phallo e khetholloa ho software ea routing eo sesebelisoa se e sebelisang. Ho seng joalo, ho fumana phallo ea AES67, ID ea seboka sa AES67 le aterese ea IP lia hlokahala. Lisebelisoa tsa Shure: Sesebelisoa sa ho fetisa se tlameha ho tšehetsa SAP. Ho Dante Controller, sesebelisoa sa phetisetso (se hlahang e le aterese ea IP) se ka tsamaisoa joalo ka sesebelisoa leha e le sefe sa Dante.

Penta setšoantšo sa MXA920 Ho penta li-Microphone tsa Square Array
O ka penta grille le foreimi ea li-microphone tsa siling tse lisekoere ho kopana le moralo oa kamore.
Mohato oa 1: Tlosa Frame le Grille

1. Ka lehlakoreng le leng la foreimi, tlosa li-screw tse 6 le li-washer tse kopanyang kopano e kholo foreiming.
   • Bohlokoa: Se ke oa tlosa li-screws tse 4 tse kentsoeng k'honeng ka 'ngoe.
2. Phahamisa kopano ka hloko ho tsoa foreiming.
3. Tlosa lebone la polasetiki e bohlooho la LED. Tlohela tataiso ea polasetiki e ntšo sebakeng sa eona.
4. Tlosa li-screw tsohle tse 4 lehlakoreng le leng la foreimi. Tlosa lehlakore leo la foreime.
5. Tlosa grille e bataletseng ho tsoa foreiming.
6. Tlosa ka hloko sekhechana sa foam ho tloha grille. Hula ho tloha ka mathōko, moo e khomaretsoeng ka likhoele tsa hook-and-loop fastener.
   • Bohlokoa: U se ke ua penta foam.
7. Pele o penta, kenya hape lehlakore la foreimi eo u e tlositseng mohatong oa 1.4.

Mohato oa 2: Mask le Pente

1. Sebelisa masking tape ho koahela extrusion eohle (e totobalitsoeng ka botšo) e tsamaeang ka hare ho foreimi. Sena se tiisa hore likotoana tse hlokahalang tsa tšepe li kopana ha li kopantsoe hape.
2. Sebelisa masking theipi ho koahela likhoele tsa hook le loop holim'a grille.
3. Penta foreime le grille. Li tlohele li ome ka ho feletseng pele li kopanya hape. U se ke ua penta karolo leha e le efe ea kopano e kholo.

Mohato oa 3: Ho kopanya hape

1. Hokela sekotoana sa foam ho grille ka likhoele tsa hook-and-loop fastener.
2. Tlosa lehlakore le le leng la foreimi joalo ka mohato oa 1.4. Hlakola grille hape ka har'a foreime.
3. Hokela lehlakore le setseng la foreime 'me u le sireletse ka li-screw tse 4.
4. Hokela phala ea lebone la LED sekotoaneng sa tataiso sa polasetiki e ntšo.
5. Lumellanya LED le phaipi e khanyang 'me u khutlisetse kopano e kholo sebakeng sa foreime.
   • Hlokomela: Letšoao la kopano le sekhutlong se lumellanang le LED.
6. Kenya li-screws tse 6 ka lehlakoreng le leng ho boloka kopano e kholo ho foreimi. U se ke ua itlama ho feta tekano.

Penta li-Microphone tsa MXA920-R
Sekoahelo se ka morao sa li-microphone tse pota-potileng li ka penta hore li kopane le moralo oa kamore.
Mohato oa 1: Tlosa 'me u pente Grille

1. Lokolla sekoti se setehileng se kopanyang grille le sekoahelo se ka morao. Fetolela maekrofounu.
2. Fetola grille joalo ka ha ho bonts'itsoe ho e lokolla sekoahelong se ka morao. E phahamise 'me u e ntše ka har'a li-tab e e tšoereng.
3. Tlosa ka hloko sengoathoana sa lesela ho tloha ho grille. E hule ho tloha ka mathōko moo e hokeletsoeng ka likhoele tsa Velcro. U se ke ua penta lesela.
4. Tšoara mathōko a tataiso ea polasetiki e ntšo sebakeng 'me u hulele holim'a phaipi e hlakileng ho e tlosa. Tlohela tataiso sebakeng sa eona.
5. Koahela li-tabo tse 7 tsa tšepe tse se nang letho holim'a grille.
6. Penta grille.

Mohato oa 2: Tlosa 'me u pente Sekoahelo sa Morao

1. Tlosa li-screws tse 7 holim'a phanele ea tšehetso ea aluminium. Fetola sekoahelo se ka morao.
2. Tlosa li-screws tse 12 tse hokelang sekoaelo se ka morao sebakeng sa processor. Beha sekoahelo sa processor ka thoko 'me boto e ntšo e shebile holimo.
3. Makha sebaka sohle se bataletseng bohareng ba sekoahelo se ka morao. Koahela li-tab tse 7 tse ka hare ho sekoahelo se ka morao ho thibela pente hore e se ke ea kena likhoeleng tsa screw.
4. Penta bokantle ba sekoahelo se ka morao.

Mohato oa 3: Kopanya Microphone hape

Etsa hore pente e ome pele e kopanya hape.

1. Sebelisa li-screw tse 12 ho hokela sekoaelo se ka morao ho processor.
2. Sebelisa likurufu tse 7 ho hokela hape phanele ea tšehetso ea aluminium.
3. Kenya pompo ea lebone hape holim'a grille ka ho e penya sebakeng.
4. Hokela sengoathoana sa lesela ho grille.
5. Lokisetsa grille le li-tab tse 7 sekoahelong se ka morao. E behe fatše 'me u fetole grille joalokaha ho bontšoa ho kenya li-tab.
6. Tšoara sekontiri se behiloeng.

Ho Sebelisa Likhoele Tsa Taelo
Sesebelisoa sena se fumana litaelo tsa logic holim'a marang-rang. Mekhahlelo e mengata e laoloang ka Moqapi e ka laoloa ho sebelisoa tsamaiso ea motho oa boraro, ho sebelisa mohala o loketseng oa taelo.
Likopo tse tloaelehileng:

• Semumu
• Mmala le boitšoaro ba LED
• E kenya li-presets
• Ho fetola maemo

Lethathamo le felletseng la likhoele tsa taelo le fumaneha ho: pubs.shure.com/command-strings/MXA920.

Kopanya MXA920 le Litsamaiso tsa Taolo ea Khamera
Li-microphone tsa MXA920 li fana ka tlhahisoleseling mabapi le boemo ba sebui, boemo ba lobe, le litlhophiso tse ling ka likhoele tsa taelo. U ka sebelisa lintlha tsena ho hokahanya maekrofono le litsamaiso tsa taolo ea khamera. Sheba lenane la litaelo tsa lisebelisoa tsa lik'hamera ho ithuta haholoanyane.

Ho batle phoso

Bothata	Tharollo
Audio ha e teng kapa e khutsitse/e sothehile	Sheba lithapo. Netefatsa hore kanale ea tlhahiso ha ea khutsisoa. Hlahloba hore na maemo a tlhahiso ha aa behoa tlase haholo.
Boleng ba molumo ha bo hlaka kapa bo se na letho	Hlahloba hore na sebaka sa khaso se eme hantle. Sebelisa EQ ho fetola karabelo ea khafetsa.
Maekerofounu ha e sebetse	Sheba hore na maekerofounu e hoketsoe ho Power over Ether net (PoE) koung ho switjha. Sheba lithapo tsa marang-rang le likhokahano.
Microphone ha e hlahe ho Moqapi kapa ho Shure Web Sesebelisoa sa Discovery	Netefatsa hore microphone e na le matla. Etsa bonnete ba hore maekrofono o ho netweke e tšoanang le subnet joalo ka PC. Tima likhokahano tsa marang-rang tse sa sebelisoeng ho hokela sesebelisoa (joalo ka Wi-Fi). Sheba hore na seva ea DHCP ea sebetsa (haeba e sebetsa). Seta sesebelisoa bocha ha ho hlokahala.
Phoso e khubelu e benyang LED	Eya ho [Sesebediswa sa hao]> Litlhophiso> Kakaretso> Export log ho romela tlaleho ea ketsahalo ea sesebelisoa. Moqapi o boetse o na le lethathamo la liketsahalo ho menu e kholo e bokellang lintlha bakeng sa lisebelisoa tsohle tsa Moqapi. Sebelisa lintlha tsa liketsahalo ho fumana boitsebiso bo eketsehileng, le ikopanye le Shure ha ho hlokahala.
Ha ho mabone	Eya ho [Sesebediswa sa hao] > Di-setting > Mabone. Sheba hore na khanya e timiloe kapa haeba li-setting tse ling li tingoe.
Web Sesebelisoa se lags ho sebatli sa Google Chrome	Koala khetho ea ho potlakisa hardware ho Chrome.

Bakeng sa thuso e eketsehileng:

• Ikopanye le Shure
• Ingolise bakeng sa koetliso le Shure Audio Institute

Litlhaloso

Kakaretso

• Mofuta oa Tšireletso
  • Ea iketsang kapa e tsamaisoang
• Litlhoko tsa Matla
  • Matla holim'a Ethernet (PoE), Sehlopha sa 0
• Tšebeliso ea Matla
  • 10.1 W boholo
• Laola Software
  • Moqapi kapa web kopo

Plenum Rating

MXA920-S	UL2043 (E Loketse Libaka tsa ho Ts'oara Moea)
MXA920-R	Ha e fuoe lintlha

Tšireletso ea Lerōle

• IEC 60529 IP5X Lerōle le Sirelelitsoeng

Sebaka sa Mocheso oa Ts'ebetso

• −6.7°C (20°F) ho isa ho 40°C (104°F)

Storage Mocheso Range

• −29°C (−20°F) ho isa ho 74°C (165°F)

Marang-rang

• Litlhoko tsa Cable
  • Cat5e kapa holimo (thapo e sirelelitsoeng e khothalelitsoe)
• Mofuta oa Sehokelo
  • RJ45
  • Audio

AES67 kapa Dante Digital Output

Chan nel Palo	Othomathiki kgaso e butswe	Likanale tse 2 kaofela (sephetho se le 1, tšupiso e le 'ngoe ea AEC ka mocha)
	Sekoahelo se iketsang lilemo off	Likanale tse 10 kaofela (liteishene tse 8 tse ikemetseng tsa phetisetso, tlhahiso e le 'ngoe ea automix, 1 AEC reference in channel)

SampLing Rate	48 kHz
Botebo bo Botle	24

Kutloelo-bohloko

• ho 1khz
• −1.74 dBFS/Pa

Boholo ba SPL

• E amana le 0 dBFS e feteletseng
• 95.74 dBSPL

Tekanyo ea Signal-to-Noise

• Ref. 94 dBSPL ho 1 kHz
• 75.76 dB E boima ba 'mele

Ho lieha ho fihla

• Ha e kenyeletse Dante latency

Lits'oants'o tse otlolohileng (Ho koaheloa ka bohona ho tima)	15.9 ms
Automix output (E kenyelletsa ts'ebetso ea IntelliMix)	26.6 ms

Lerata la boithati

• 18.24 dB SPLA

Dynamic Range

• 77.5dB

Digital Signal Processing

• Ho kopanya ka bohona, ho hlakoloa ha acoustic echo (AEC), phokotso ea lerata, taolo ea boiketsetso, compressor, ho lieha, ho leka-lekanya (4band
• parametric), semumu, phaello (140 dB range)

Acoustic Echo Ho hlakola mohatla

• Ho fihlela ho 250 ms

Karabelo ea Khafetsa

• 125 ho isa ho 20,000 Hz

MXA920 Frequency Response

• Karabelo ea maqhubu e lekantsoe ka kotloloho ho axis ho tloha bohole ba maoto a 6 (1.83 m).

Litekanyo

Boima ba 'mele

• MXA920-S: 11.8 lbs (5.4 lik'hilograma)
• MXA920-R: 12.7 lbs (5.8 lik'hilograma)

MXA920-S

• A (Maekerofono flange): 0.41 in. (10.5 mm)
• B (Motšehare ho isa pheletsong): 23.77 in. (603.8 mm)
• C (Boemo): 2.15 in. (54.69 mm)

MXA920-S-60CM

• A (Motšehare ho isa pheletsong): 23.38 in. (593.8 mm)
• B (Boemo): 2.15 in. (54.69 mm)

MXA920-R

• A (Bophahamo ho isa hodimo ho dintshi tsa mahlo): 2.4 in. (61.3 mm)
• B (Bophara ba ka ntle): 25 in. (635.4 mm)

BOHLOKOA POLOKETSO LITAELO

1. BALA litaelo tsena.
2. BOLOKA litaelo tsena.
3. HLOKOMELA litemoso tsohle.
4. LATELA ditaelo tsohle.
5. U SE KE UA sebelisa sesebelisoa sena haufi le metsi.
6. HLOKA FEELA ka lesela le omeletseng.
7. U SE KE UA thiba menyetla efe kapa efe ea moea. Lumella libaka tse lekaneng bakeng sa moea o lekaneng oa moea le ho kenya ho latela litaelo tsa moetsi.
8. U SE KE UA kenya haufi le mehloli efe kapa efe ea mocheso e kang malakabe a bulehileng, li-radiator, lirekoto tsa mocheso, litofo kapa lisebelisoa tse ling (ho kenyeletsoa amplifiers) tse hlahisang mocheso. U se ke ua beha mehloli leha e le efe e bulehileng ea lelakabe sehlahisoa.
9. O SE KE oa hlola sepheo sa polokeho sa polaka ea mofuta oa polarized kapa e thehileng fatše. Polarized plug e na le li-blades tse peli tse nang le bophara bo boholo ho feta bo bong. Polaka ea mofuta oa fatše e na le li-blades tse peli le prong ea boraro ea motheo. Lehare le pharaletseng kapa prong ea boraro li fanoe molemong oa polokeho ea hau. Haeba polaka e fanoeng e sa lekane sehokelong sa hau, ikopanye le ramotlakase bakeng sa ho nchafatsa sekheo sa khale.
10. TŠIRELETSA thapo ea motlakase hore e se ke ea haptjoa kapa e penngoa, haholo-holo ha li-plug, lijana tsa ho kenya matla, le moo li tsoang teng.
11. SEBELISA FEELA liphutheloana/lisebelisoa tse boletsoeng ke moetsi.
12. SEBELISA feela ka kolotsana, setepisi, li-tripod, bracket, kapa tafole e boletsoeng ke moetsi, kapa e rekisoang ka lisebelisoa. Ha kariki e sebelisoa, ela hloko ha u tsamaisa motsoako oa kariki / lisebelisoa ho qoba ho tsoa kotsi ho tloha qetellong.
13. UNPLUG sesebelisoa sena nakong ea sefefo sa lehalima kapa ha se sa sebelisoe nako e telele.
14. FIHLELA litšebeletso tsohle ho basebeletsi ba nang le tsebo. Ts'ebeletso e hlokahala ha lisebelisoa li senyehile ka tsela efe kapa efe, joalo ka thapo ea phepelo ea motlakase kapa plug e senyehile, mokelikeli o tšolohile kapa lintho li oele ka har'a lisebelisoa, sesebelisoa se pepesehetse pula kapa mongobo, ha se sebetse ka mokhoa o tloaelehileng, kapa e theotsoe.
15. U SE KE UA pepesa lisebelisoa hore li rothe le ho faphatsa. U SE KE UA kenya lintho tse tlatsitsoeng ka maro, joalo ka linkho, holim'a lisebelisoa.
16. Plaka ea MAINS kapa sesebelisoa se kopanyang lisebelisoa li tla lula li sebetsa habonolo.
17. Lerata la moea la Apparatus ha le fete 70dB (A).
18. Lisebelisoa tse nang le moaho oa CLASS I li tla hokahana le sehokelo sa sokete sa MAINS se nang le khokahano e sireletsang ea lefatše.
19. Ho fokotsa kotsi ea mollo kapa ts'oaetso ea motlakase, u se ke ua pepesetsa sesebelisoa sena pula kapa mongobo.
20. Seke oa leka ho fetola sehlahisoa sena. Ho etsa joalo ho ka baka kotsi ea motho le/kapa ho hloleha ha sehlahisoa.
21. Sebetsa sehlahisoa sena ka har'a mocheso oa mocheso o boletsoeng.

Letšoao lena le bontša hore voltagka har'a yuniti ena ho na le kotsi ea ts'oaetso ea motlakase. Letšoao lena le bontša hore ho na le litaelo tsa bohlokoa tsa ts'ebetso le tlhokomelo litokomaneng tse tsamaeang le yuniti ena.

Lintlha tsa bohlokoa tsa Sehlahisoa

• Lisebelisoa li reretsoe ho sebelisoa lits'ebetsong tsa litsebi tsa molumo.
• Sesebelisoa sena se lokela ho hokahanngoa feela le marang-rang a PoE ntle le ho fetela semeleng se kantle.
  • Hlokomela: Sesebelisoa sena ha se reretsoe ho hokeloa ka kotloloho le netweke ea inthanete ea sechaba.
• Liphetoho kapa liphetoho tse sa amoheloeng ka kotloloho ke Shure Incorporated li ka hlakola matla a hau a ho sebelisa sesebelisoa sena.
  • Hlokomela: Teko e ipapisitse le ts'ebeliso ea mefuta ea li-cable e fanoeng le e khothaletsoang. Tšebeliso ea mefuta e meng ntle le e sirelelitsoeng (e sirelelitsoeng) e ka theola tšebetso ea EMC.
• Ka kopo latela leano la sebaka sa hau sa ho sebelisa li-betri, ho paka, le litšila tsa elektroniki.

Boitsebiso ho mosebedisi

Thepa ena e lekoa 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela karolo ea 15 ea Melao ea FCC. Thepa ena e hlahisa, e sebelisa, 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela bukana ea litaelo ea moetsi, e ka baka tšitiso ea ho amohela seea-le-moea le thelevishene.
Tlhokomeliso: Melao ea FCC e fana ka hore liphetoho kapa litokiso tse sa amoheloang ka kotloloho ke Shure Incorporated li ka hlakola matla a hau a ho sebelisa sesebelisoa sena. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa, e sebelisa, 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ea seea-le-moea kapa kamohelo ea thelevishene, e ka lekanyetsoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e le 'ngoe kapa tse ling tsa mehato e latelang:

• Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
• Eketsa karohano pakeng tsa thepa le moamoheli.
• Hokela lisebelisoa le seketsoaneng sa potoloho se fapaneng le seo moamoheli a hokahaneng le sona.
• Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.

Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:

1. Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi.
2. Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.

Sesebelisoa sena sa dijithale sa Sehlopha sa B se lumellana le Canadian ICES-003. Liaparo tse tloaelehileng tsa sehlopha sa B li lumellana le la norme NMB-003 du Canada.

• KANNA ICES-003 (B)/NMB-003(B)
• Phatlalatso ea CE ea Conformity e ka fumanoa ho: www.shure.com/europe/compliance.

TS'ELISO

Moemeli ea lumelletsoeng oa Europe:

• Shure Europe GmbH
• Tumellano ea Lefatše
• Jakob-Dieffenbacher-Str. 12
• 75031 Eppingen, Jeremane
• Mohala: +49-7262-92 49 0
• Lengolo-tsoibila: info@shure.de.
• www.shure.com.

Sehlahisoa sena se kopana le Litlhokahalo tsa Bohlokoa tsa litaelo tsohle tse amehang tsa Europe mme se lokeloa ho tšoaea CE. Phatlalatso ea CE ea Conformity e ka fumanoa ho Shure Incorporated kapa leha e le efe ea baemeli ba eona ba Europe. Bakeng sa tlhahisoleseling ka kopo etela www.shure.com. Tataiso ea mosebelisi bakeng sa li-microphone tsa siling tsa Shure MXA920. Ithute ho kenya li-mics tsa lisekoere le tse chitja, ho theha tšireletso, le ho fumana molumo o monate kapele phapusing efe kapa efe.
Mofuta: 0.7 (2023-A)

Litokomane / Lisebelisoa

	SHURE MXA920 Ceiling Array Microphone [pdf] Bukana ea Mosebelisi MXA920 Ceiling Array Microphone, MXA920, Ceiling Array Microphone, Array Microphone, Microphone
	SHURE MXA920 Ceiling Array Microphone [pdf] Bukana ea Mosebelisi MXA920 Ceiling Array Microphone, MXA920, Ceiling Array Microphone, Array Microphone, Microphone
	SHURE MXA920 Ceiling Array Microphone [pdf] Bukana ea Mosebelisi MXA920-S USB-V, MXA920W-S, MXA920 Ceiling Array Microphone, Ceiling Array Microphone, Array Microphone, Microphone

Litšupiso

• Bukana ea Mosebelisi