SCHAPPI ENGINEERING BTMX Logic Adders le Combiners
Litlhaloso
- MoqtagMaemo:
- Tumellano ea Kenyeletso/Sephetho: Eurorack voltagmaemo a e (-12V ho +12V, kapa 24V tlhoro ho fihla tlhorong)
- Tharollo ea Hona Joale:
- + 12V: 26mA
- -12V: 10mA
- Mofuta oa Letšoao:
- Liphetho tsa Heke: 0 kapa 10V
- Litlhahiso tse hatiloeng: 0 ho 9.5V
- Likenyo tsa Heke: 2.8V threshold
Litaelo tsa Tšebeliso ea Sehlahisoa:
Tlhaloso le Likarolo tsa Mojule
BTMX ke motsoako oa 4-channel logic functioner le motsoako o nang le tlhahiso e eketsehileng bakeng sa CV e lumellanang le modulation. E ka sebelisoa ka boikemelo kapa ka kopanelo le li-module tse ling bakeng sa ho theha likamano tse rarahaneng tsa harmonic le morethetho ka lebelo le fapaneng.
Litaolo
Module e na le li-switches bakeng sa tlhahiso e 'ngoe le e' ngoe ea logic le li-switch tse peli tsa mode. Litaolo li kenyelletsa:
- MOLAO OA 1-8: E khutsisa molaetsa o tsamaisanang (Hodimo ho butswe, tlase ho timilwe)
- Mokhoa oa ho nahana A/B: E khetha mokhoa oa logic (A: LE, B: KAPA, XOR)
Lintho tse kenang
Lintho tsohle tse kentsoeng ke lintlha tsa logic tse nang le moeli o ka bang 2.8V o susumetsang moeling o ntseng o phahama. Maikutlo a 1-4 a theha lentsoe le le leng la 4-bit, ha 5-8 e etsa lentsoe la bobeli la 4-bit.
Litholoana
Mojule o fana ka liphetho tsa heke maemong a fapaneng le analoge stepped voltagtlhahiso ea e ho tloha ho 0 ho isa ho 9.5V.
Lipontšo
Lintho tsohle tse kenang le tse hlahisoang li na le li-LED tse putsoa bakeng sa ho bontša boemo ba tsona ba hajoale.
Kamoo E Sebetsang Kateng
Mojule e ka ba viewhlophisitsoe e le liheke tse 'ne tse arohaneng tsa lintlha tse peli tse nang le mesebetsi e ka khethoang kapa e le ts'ebetso e le 'ngoe e amohelang li-nibble tse peli (lentsoe la logic le li-four-bit) joalo ka ho kenya. Liheke li ka kopanngoa ho theha tlhahiso ea analoge e hatelitsoeng ka matla a itsengtagmaemo a
LBH
- P: Li-voltagmaemo a tšehetsoeng ke mojule oa BTMX?
A: Mojule o lumellana le Eurorack voltage, maemo a tšehetsang ho tloha ho -12V ho ea ho +12V, kapa ho fihla ho 24V tlhoro ho fihla tlhorong. - P: Ke khetha mekhoa e fapaneng ea logic joang mojuleng oa BTMX?
A: Sebelisa li-switch tsa mode tse ngotsoeng Logic Mode A le Logic Mode B ho potoloha mekhoa e teng ea logic (LE, KAPA, XOR).
Boitsebiso ba Theknoloji
Moqtage Maemo
BTMX e etselitsoe ho lumellana le Eurorack voltage litekanyetso. Lintho tse kenang le tse hlahisoang ke voltage le hona joale e sirelelitsoeng 'me ha ea lokela ho senngoa ke boemo leha e le bofe ka har'a tikoloho ea Eurorack (-12V ho + 12v, kapa 24v tlhōrō ho ea holimo).
| TS'OANA MOFUTA | LEBAKA | Lintlha |
| Liphetho tsa heke | 0 kapa 10V | |
| Liphetho tse hatiloeng | 0 ho 10V | |
| Maikutlo a liheke | 2.8V
monyako |
Kenyelletso ea ho bapisa stage bakang ho pota
2,8V |
Draw ea Hona joale
- + 12V: 26mA
- -12V: 10mA
Tlhaloso le Likarolo tsa Mojule
Selelekela
BTMX (BitMix) ke 4 channel logic function mixer le connector, e nang le tlhahiso e eketsehileng e hatelitsoeng bakeng sa CV e lumellanang le modulation. BTMX e sebetsa ka boikemelo le mmoho le mojule wa rona o teng wa NIBBLER le BTFLD e tlang.
Likamano tse rarahaneng tsa harmonic le morethetho tse entsoeng ka mesebetsi e 4 e fapaneng ea mohopolo li fumaneha ka lebelo la molumo le lebelo le liehang la meropa, molumo o lumellanang le tempo, le motsamao oa pseudo-random o ka phetoang le o riffable. 
Khokahano e etselitsoe hore e bapaloe, e nang le li-switches bakeng sa tlhahiso e 'ngoe le e 'ngoe ea logic hammoho le li-switch tse peli.
Litaolo
Liphetoho
| TAolo | TLHALOSO |
| 1-8 | E homola se kentsweng se tsamaisanang (Hodimo ho butswe, tlase ho timilwe) |
| Mokhoa oa ho nahana A | E khetha mokhoa oa logic |
| Mokhoa oa ho nahana B | E khetha mokhoa oa logic |
| A | B | MOKHOA |
| fatshe | fatshe | LE |
| fatshe | up | KENYA |
| up | fatshe | OR |
| up | up | XOR |
Lintho tse kenang
Lintho tsohle tse kentsoeng ke lintlha tsa logic tse nang le moeli o ka bang 2.8V o qalang moeling o nyolohang. Lintho tsohle tse kenyang li tloaelehile holimo (haeba ho se na letho, 'me switch e butsoitse, e romela molumo o motletagle).
| KEKETSO | Tlhaloso |
| 1-4 | Lintlha tse 'nè tsa pele li reretsoe ho ba lentsoe le le leng la 4 bit' me li fepa lehlakore le le leng la mosebetsi oa logic |
| 5-8 | Lintlha tse 'nè tsa bobeli li reretsoe hore e be lentsoe la bobeli la 4 bit' me li fepa karolo ea bobeli ea mosebetsi oa logic |
Litholoana
Liphetho tsa heke ke 0 kapa hoo e ka bang 10V
| NAME | TLHALOSO |
| 1 ★ 5 | Sephetho sa heke bakeng sa karolo e kaholimo, e emelang 8 |
| 2 ★ 6 | Heke e behiloe bakeng sa karolo ea register e emelang 4 |
| 3 ★ 7 | Keketso ea heke bakeng sa karolo ea register e emelang 2 |
| 4 ★ 8 | Sephetho sa heke bakeng sa karolo e tlase ea rejisetara, e emelang 1 |
Analoge e ile ea hatela voltages tlhahiso 0 ho 9.5V
| LABEL | NAME | TLHALOSO |
 |
MOHATO TSELA
TSOA |
Kakaretso e lekantsoeng ea likotoana tsa rejisetara joalo ka analoge e hatelitsoeng voltage |
Lipontšo
Lintho tsohle tse kenang le tse hlahisoang li na le li-LED tse putsoa tse bontšang boemo ba tsona ba hajoale, ka sekhahla sa molumo li ka bonts'a boputsoa bo tiileng.
Kamoo E Sebetsang Kateng
Setšoantšo se Thibeloang
Binary VS Logic Gates
Mojule ona o ka ba viewhlophisitsoe joalo ka liheke tse peli tse arohaneng tsa logic tse nang le ts'ebetso e ka khethoang kapa ts'ebetso e le 'ngoe e khethiloeng e amohelang li-nibble tse peli (mantsoe a mane a kelello) joalo ka kenyeletso.
Ho na le mekhoa e 'meli ea ho khetholla:
Bakeng sa ts'ebetso ea "ADD" haeba lintho tse peli tse kenang li le holimo, li fetela ho tse ling tse phahameng ka ho fetisisa, ho theha sehlopha sa maemo kapa kamano pakeng tsa liheke.
Bakeng sa tlhahiso ea analoge e hatelitsoeng liheke li eketsoa hammoho le litekanyo tsa binary.
Karolo e ka holimo (1 ★ 5) e emela halofo ea tlhahiso ho hoo e ka bang 5V, e latelang e tlase halofo ea hoo e ka bang 2.5V, ebe 1.25V, 'me tlase e pota-potile 0.6V. Moqtage tla eketsa hoo e ka bang 9.5V.
Mekhoa ea logic
| A | B | MOKHOA |
| fatshe | fatshe | LE |
| fatshe | up | KENYA |
| up | fatshe | OR |
| up | up | XOR |
Li-switches tse peli hammoho li khetha hore na ke tlhahiso efe ea logic e sebelisoang.
- Ts'ebetso ea AND logic e phahame haeba lisebelisoa ka bobeli li le holimo ebile li le tlase ho seng joalo. U ka e sebelisa ho etsa ho phatloha ka ho kopanya tatellano e telele, e liehang le e khuts'oane e potlakileng, ho kopanya e potlakileng le e liehang. Ha e sebelisoa le tatellano ea morethetho e sa amaneng, sena se tla nolofatsa tatelano.
HLOKOMELA: Haeba u na le e 'ngoe ea lintho tse peli tse kentsoeng e khutsitsoe, ho ke ke ha hlola ho ba le tlhahiso. - Ts'ebetso ea OR logic e holimo haeba ho kenya letsoho ho le holimo. U ka sebelisa sena ho kopanya tatellano e 'meli ea morethetho e sa amaneng hore e be 'ngoe.
HLOKOMELA: Haeba tlhahiso e le 'ngoe e butsoe ntle le ho kenya letsoho, tlhahiso e nang le eona e be holimo kamehla. Ka mokhoa o ts'oanang, haeba ho na le tatellano e 'meli e telele e liehang kapa e phathahaneng haholo, e kanna ea se theohe. - Ts'ebetso ea logic ea XOR e phahame haeba ho kenya letsoho ho phahame kapa ho le tlase haeba lintlha tse peli li le holimo. Sena se bolela hore e ka sebelisoa ho kopanya tatellano e 'meli empa hape e tla netefatsa phetoho ea boemo ba tlhahiso bakeng sa phetoho e' ngoe le e 'ngoe ea boemo ba ho kenya.
Mohlomong ena ke mokhoa o bonolo ka ho fetisisa oa ho sebelisa mokhoa oa ho kopanya tatellano e 'meli. Hape XOR e ntle ka sekhahla sa molumo. 
Mosebetsi oa ADD logic o phahame haeba ho kenya letsoho ho phahame kapa ho le tlaase haeba lisebelisoa ka bobeli li le holimo, ho tšoana le XOR, ntle le hore li tla nka ho tloha ho tlase ho s.tage haeba likotoana ka bobeli li phahame. Sena se bolela hore ka lebelo la molumo ke mokhoa oa ho feto-fetoha ha maemo.
Ho boetse ho bolela hore haeba u e sebelisa bakeng sa tatellano ea morethetho e nang le liphetho tse fapaneng tse eang lisebelisoa tse fapaneng (bakeng sa khale.ample kick and snare) ho bolela hore tatellano ea liletsa tsa hau tse fapaneng li tla ama tse ling, e leng ntho e ka ferekanyang ha o so itokisetsa.
Lipache tseo u ka qalang ho ithuta ka tsona
MOHLOMI MOHLOMI
- Beha LOGIC MODE ho OR
- Li-patch li kenya lintho tse kenang 'me u sebelise li-switches ho khutsisa kamoo u batlang kateng
- Etsa bonnete ba hore lisebelisoa life kapa life tse sa sebelisoeng lia tingoa kapa tlhahiso e tla lula e phahame
- Liphetho tsa patch kamoo u batlang
- Likanale li ka tlanngoe ka liketane (se hlahisoang kenyeletsong e latelang. Sena se ile sa fokotsa palo eohle ea lintho tse kenang empa ho fihla ho li-triggers tse 5 li ka kopanngoa ka tsela ena, kapa lihlopha tse peli tsa tse tharo.
MOHLOMI MOKEKE
- Beha LOGIC MODE ho XOR
- Kopanya liheke ka har'a lintho tse kenang 'me u sebelise li-switches ho khutsisa kamoo u batlang
- Etsa bonnete ba hore lisebelisoa life kapa life tse sa sebelisoeng lia tingoa kapa tlhahiso e tla fetoloa
- Liphetho tsa liheke tsa patch kamoo u batlang
- Leka ho patisa tlhahiso e hatiloeng ho ea ho molumo kapa modulation input
- Leka mekhoa e meng ea kelello
KELETSO: Haeba u sebelisa li-Nibblers tse peli ho liheke tsa jenereithara leka ho pata e le 'ngoe ka tatellano e fapaneng bakeng sa sete e pharaletseng ea morethetho. Sena se etsoa bit patching e tlase ho ea holimo joalo-joalo.
Beha LOGIC MODE ho LE- Kopanya heke e telele, e liehang lehlakoreng le le leng
- Kopanya heke e potlakileng ho e 'ngoe
- Sephetho se tla ba se phahameng feela ha liheke ka bobeli li phahame ka nako e le 'ngoe
MOEKETSI MOKHATLO
- Beha LOGIC MODE ho ADD
- Patch 4 bit rate rate matshwao ka lehlakoreng le leng le le leng (ho tloha Nibbler kapa BTFLD bakeng sa example)
- Mamela tlhahiso e hatiloeng
- Bulisa likotoana tse le 'ngoe joalo ka mokhoa o sa hlakang oa ho fetola maqhubu
Contact Info
Haeba u na le lipotso ka kopo ikopanye le Eric Schlappi ho: eric@schlappiengineering.com
Litokomane / Lisebelisoa
 |
SCHAPPI ENGINEERING BTMX Logic Adders le Combiners [pdf] Bukana ea Mosebelisi BTMX, BTMX Logic Adders and Combiners, BTMX Logic Adders, BTMX Combiners, Logic Adders le Combiners, Logic Adders, Combiners |
