Satel CR-MF5 Keypad e nang le MIFARE Proximity Card Reader
Tlhahisoleseding ya Sehlahiswa
Litlhaloso
- Lebitso la Sehlahiswa: CR-MF5 Keypad e nang le sebali sa karete ea haufi ea MIFARE
- Moetsi: SATEL
- Kemiso: Ho hlokahala basebetsi ba tšoanelehang
- Tšebelisano: Sistimi ea INTEGRA, sistimi ea ACCO, le litsamaiso tse ling tsa moetsi
- Kenyeletso ea Matla: +12 VDC
- Boemelo: NC, C, NO, DATA/D1, RSA, RSB, TMP, +12V, COM, CLK/D0, IN1, IN2, IN3, BELL
Lipotso tse atisang ho botsoa (FAQ)
- Q: Nka fumana buka e felletseng ea mosebelisi bakeng sa letlapa la CR-MF5 hokae?
- A: Bukana e felletseng e ka kopitsoa ho tsoa ho moetsi websaete ho www.satel.pl. U ka sebelisa khoutu ea QR e fanoeng ho fihlella ka kotloloho websaete ebe u khoasolla bukana.
- Q: A na nka hokela lisebelisoa tse fetang 24 tsa taolo ea phihlello le 'mali oa karete ea MIFARE ho sesebelisoa sa USB / RS-485?
- A: Che, ha ho khothalletsoe ho hokahanya lisebelisoa tse fetang 24 tsa taolo ea phihlello le 'mali oa karete ea MIFARE ho converter. Lenaneo la CR SOFT le kanna la se khone ho ts'ehetsa lisebelisoa tse ling ka nepo.
- Q: A na nka sebelisa lenaneo la ACCO Soft ho hlophisa litlhophiso tsa letlapa la likonopo?
- A: E, lenaneo la ACCO Soft ka mofuta oa 1.9 kapa e ncha e nolofalletsa ho hlophisa litlhophiso tsohle tse hlokahalang bakeng sa letlapa la likonopo. Haeba u khetha ho sebelisa lenaneo lena, u ka tlōla mehato ea 2-4 litaelong tsa ho kenya.
Litaelo tsa Tšebeliso ea Sehlahisoa
Ho kenya
- Bula sebaka sa letlapa la likonopo.
- Hokela letlapa la likonopo komporong u sebelisa sesebelisoa sa USB / RS-485 (mohlala, ACCO-USB ka SATEL). Latela litaelo tse bukeng ea converter.
- Hlokomela: Se ke oa hokela lisebelisoa tse fetang 24 tsa taolo ea phihlello le sebali sa karete sa MIFARE (CR-MF5 le CR-MF3) ho converter. Lenaneo la CR SOFT le kanna la se khone ho ts'ehetsa lisebelisoa tse ling ka nepo.
- Lokisetsa keypad lenaneong la CR SOFT:
- Theha morero o mocha kapa bula projeke e teng.
- Theha khokahano lipakeng tsa lenaneo le sesebelisoa.
- Hlophisa li-setting ebe u li kenya ho letlapa la likonopo.
- Hakolla letlapa la likonopo khomphuteng.
- Mathisa lithapo moo u batlang ho kenya letlapa la likonopo. Sebelisa thapo ea UTP (para e sothehileng e sa sireletsehang) ho hokela bese ea RS-485. Sebelisa likhoele tse otlolohileng tse sa sirelelitsoeng bakeng sa likhokahano tse ling.
- Beha setsi sa kampere khahlanong le lebota 'me u tšoaee sebaka sa masoba a ntseng a hola.
- Hlakola masoba leboteng bakeng sa li-plug tsa lebota (liankora).
- Tsamaisa lithapo ka lesoba le ka har'a setsi se koetsoeng.
- Sebelisa li-plug le li-screw ho sireletsa motheo oa kampere leboteng. Khetha li-plugs tsa lebota tse etselitsoeng ka ho khetheha bakeng sa sebaka se ntseng se hola (tse fapaneng bakeng sa konkreite kapa lebota la litene, tse fapaneng bakeng sa lebota la plaster, joalo-joalo).
- Hokela lithapo ho li-terminals tsa likonopo (sheba karolo ea "Tlhaloso ea li-terminals").
- Koala sebaka sa letlapa la likonopo.
- Haeba ho hlokahala, hlophisa litlhophiso tse hlokahalang hore konopo ea konopo e sebetse tsamaisong e khethiloeng. Lenaneo la ACCO Soft ka mofuta oa 1.9 (kapa e ncha) le nolofalletsa ho hlophisa litlhophiso tsohle tse hlokahalang. Haeba e tla sebelisoa, o ka tlola mehato ea 2-4.
Tlhaloso ea li-terminals
Tlhaloso ea li-terminals tsa keypad ho sistimi ea INTEGRA
| Theminale | Tlhaloso |
|---|---|
| NC | Relay e hlahisoang hangata e koetsoe lebitso |
| C | Relay output lebitso le tloaelehileng |
| NO | Relay e hlahisoang hangata e bula lebitso |
| DATA/D1 | Lintlha [interface ea INT-SCR] |
| RSA | RS-485 boemelo ba libese [OSDP] |
| RSB | RS-485 boemelo ba libese [OSDP] |
| TMP | Ha e sebelisoe |
| +12V | +12 ho kenya matla a VDC |
| COM | Sebaka se tloaelehileng |
| CLK/D0 | Oache [INT-SCR interface] |
| IN1 | Kenyelletso ea boemo ba monyako oa mofuta oa NC |
| IN2 | HA HO mofuta oa kopo ea ho tsoa |
| IN3 | Ha e sebelisoe |
| SEBELE | Tlhahiso ea mofuta oa OC |
Tlhaloso ea li-terminals tsa keypad tsamaisong ea ACCO
| Theminale | Tlhaloso |
|---|---|
| NC | Ha e sebelisoe |
| C | Ha e sebelisoe |
| NO | Ha e sebelisoe |
| DATA/D1 | Lintlha [interface ea ACCO-SCR] |
| RSA | RS-485 boemelo ba libese [OSDP] |
| RSB | RS-485 boemelo ba libese [OSDP] |
| TMP | Ha e sebelisoe |
| +12V | +12 ho kenya matla a VDC |
| COM | Sebaka se tloaelehileng |
| CLK/D0 | Oache [ACCO-SCR interface] |
| IN1 | Ha e sebelisoe |
| IN2 | Ha e sebelisoe |
| IN3 | Ha e sebelisoe |
| SEBELE | Tlhahiso ea mofuta oa OC |
Tlhaloso ea li-terminals tsa keypad tsamaisong ea moetsi e mong
| Theminale | Tlhaloso |
|---|---|
| NC | Ha e sebelisoe |
| C | Ha e sebelisoe |
| NO | Ha e sebelisoe |
| DATA/D1 | Lintlha (1) [Sehokelo sa Wiegand] |
| RSA | RS-485 boemelo ba libese [OSDP] |
| RSB | RS-485 boemelo ba libese [OSDP] |
| TMP | Tamper tlhahiso |
| +12V | +12 ho kenya matla a VDC |
| COM | Sebaka se tloaelehileng |
Selelekela
CR-MF5 keypad e ka sebetsa ka tsela e latelang:
- INT-SCR karohano ea konopo ho sistimi ea alamo ea INTEGRA,
- ACCO-SCR keypad e nang le sebali sa karete e haufi ho sistimi ea taolo ea phihlello ea ACCO,
- keypad e nang le sebali sa karete ea haufi tsamaisong ea baetsi ba bang,
- mojule oa taolo ea monyako o ikemetseng.
Pele o kenya letlapa la likonopo, hlophisa litlhophiso tse hlokahalang bakeng sa mokhoa o khethiloeng oa ts'ebetso lenaneong la CR SOFT. Mokhelo ke keypad e lokelang ho sebetsa tsamaisong ea ACCO NET 'me e lokela ho hokeloa ho molaoli oa ACCO-KP2 o sebelisa bese ea RS-485 (OSDP protocol). Protocol ea OSDP e tšehetsoa ke balaoli ba ACCO-KP2 ka firmware version 1.01 (kapa e ncha). Boemong boo, o ka hlophisa litlhophiso tse hlokahalang lenaneong la ACCO Soft (mofuta oa 1.9 kapa o mocha).
Ho kenya
Tlhokomediso
- Sesebelisoa se lokela ho kenngoa ke basebetsi ba tšoanelehang.
- Pele o kenya, ka kopo bala buka e felletseng.
- Tlosa motlakase pele o hokela motlakase.
- Bula sebaka sa letlapa la likonopo.
- Hokela letlapa la dikonopo khomphuteng. Sebelisa converter ea USB / RS-485 (mohlala, ACCO-USB ka SATEL). Latela litaelo tse bukeng ea converter.
- Tlhokomeliso: Se ke oa hokela lisebelisoa tse fetang 24 tsa taolo ea phihlello le sebali sa karete sa MIFARE (CR-MF5 le CR-MF3) ho converter. Lenaneo la CR SOFT le kanna la se khone ho ts'ehetsa lisebelisoa tse ling ka nepo.
- Lenaneo la keypad lenaneong la CR SOFT.
- Theha morero o mocha kapa bula projeke e teng.
- Theha khokahano lipakeng tsa lenaneo le sesebelisoa.
- Hlophisa li-setting ebe u li kenya ho letlapa la likonopo.
- Hakolla letlapa la likonopo khomphuteng.
- Mathisa lithapo moo u batlang ho kenya letlapa la likonopo. Ho hokahanya bese ea RS-485, re khothaletsa ho sebelisa thapo ea UTP (para e sothehileng e sa sireletsehang). Ho etsa likhokahano tse ling, sebelisa likhoele tse sa sirelelitsoeng tse otlolohileng.
- Beha setsi sa kampere khahlanong le lebota 'me u tšoaee sebaka sa masoba a ntseng a hola.
- Hlakola masoba leboteng bakeng sa li-plug tsa lebota (liankora).
- Tsamaisa lithapo ka lesoba le ka har'a setsi se koetsoeng.
- Sebelisa li-plug le li-screw ho sireletsa motheo oa kampere leboteng. Khetha li-plugs tsa lebota tse etselitsoeng ka ho khetheha bakeng sa sebaka se ntseng se hola (tse fapaneng bakeng sa konkreite kapa lebota la litene, tse fapaneng bakeng sa lebota la plaster, joalo-joalo).
- Hokela lithapo ho li-terminals tsa likonopo (sheba: "Tlhaloso ea li-terminals").
- Koala sebaka sa letlapa la likonopo.
- Haeba ho hlokahala, hlophisa litlhophiso tse hlokahalang hore konopo ea konopo e sebetse tsamaisong e khethiloeng.
Lenaneo la ACCO Soft ka mofuta oa 1.9 (kapa e ncha) le nolofalletsa ho hlophisa litlhophiso tsohle tse hlokahalang. Haeba e tla sebelisoa, o ka tlola mehato ea 2-4.
Tlhaloso ea li-terminals
Tlhaloso ea li-terminals tsa keypad ho sistimi ea INTEGRA
| Theminale | Tlhaloso |
| NC | phetisetso e hlahisoang hangata e koetsoe |
| C | relay sephetho se tloaelehileng |
| NO | relay tlhahiso ka tlwaelo bula lebitso |
| DATA/D1 | data [interface ea INT-SCR] |
| RSA | RS-485 boemelo ba libese [OSDP] |
| RSB | RS-485 boemelo ba libese [OSDP] |
| TMP | e sa sebedisoang |
| +12V | +12 ho kenya matla a VDC |
| COM | maemo a tloaelehileng |
| CLK/D0 | oache [INT-SCR interface] |
| IN1 | Kenyelletso ea boemo ba monyako oa mofuta oa NC |
| IN2 | HA HO mofuta oa kopo ea ho tsoa |
| IN3 | e sa sebedisoang |
| SEBELE | Tlhahiso ea mofuta oa OC |
Tlhaloso ea li-terminals tsa keypad tsamaisong ea ACCO
| Theminale | Tlhaloso |
| NC | e sa sebedisoang |
| C | e sa sebedisoang |
| NO | e sa sebedisoang |
| DATA/D1 | data [interface ea ACCO-SCR] |
| RSA | RS-485 boemelo ba libese [OSDP] |
| RSB | RS-485 boemelo ba libese [OSDP] |
| TMP | e sa sebedisoang |
| +12V | +12 ho kenya matla a VDC |
| COM | maemo a tloaelehileng |
| CLK/D0 | oache [ACCO-SCR interface] |
| IN1 | e sa sebedisoang |
| IN2 | e sa sebedisoang |
| IN3 | e sa sebedisoang |
| SEBELE | Tlhahiso ea mofuta oa OC |
Tlhaloso ea li-terminals tsa keypad tsamaisong ea moetsi e mong
| Theminale | Tlhaloso |
| NC | e sa sebedisoang |
| C | e sa sebedisoang |
| NO | e sa sebedisoang |
| DATA/D1 | data (1) [Wiegand interface] |
| RSA | RS-485 boemelo ba libese [OSDP] |
| RSB | RS-485 boemelo ba libese [OSDP] |
| TMP | tamper tlhahiso |
| +12V | +12 ho kenya matla a VDC |
| COM | maemo a tloaelehileng |
| CLK/D0 | data (0) [Wiegand interface] |
| IN1 | keno e ka hlophisehang [sehokelo sa Wiegand] |
| IN2 | keno e ka hlophisehang [sehokelo sa Wiegand] |
| IN3 | keno e ka hlophisehang [sehokelo sa Wiegand] |
| SEBELE | Tlhahiso ea mofuta oa OC |
Tlhaloso ea li-terminals tsa mojule oa taolo ea monyako o ikemetseng
| Theminale | Tlhaloso |
| NC | phetisetso e hlahisoang hangata e koetsoe |
| C | relay sephetho se tloaelehileng |
| NO | relay tlhahiso ka tlwaelo bula lebitso |
| DATA/D1 | e sa sebedisoang |
| RSA | RS-485 boemelo ba libese [OSDP] |
| RSB | RS-485 boemelo ba libese [OSDP] |
| TMP | tamper tlhahiso |
| +12V | +12 ho kenya matla a VDC |
| COM | maemo a tloaelehileng |
| CLK/D0 | e sa sebedisoang |
| IN1 | ho kenya boemo ba monyako |
| IN2 | kopo ea ho tsoa |
| IN3 | e sa sebedisoang |
| SEBELE | Tlhahiso ea mofuta oa OC |
Ho ka buisanoa ka phatlalatso ea conformity ho: www.satel.pl/ce
- SATEL sp. z oo • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND
- tel. +48 58 320 94 00
- www.satel.pl
Skena
- Bukana e felletseng e fumaneha ho www.satel.pl.
- Skena khoutu ea QR ho ea ho rona websaete ebe u khoasolla bukana.
Litokomane / Lisebelisoa
 |
Satel CR-MF5 Keypad e nang le MIFARE Proximity Card Reader [pdf] Tlhophiso Tataiso CR-MF5 Keypad e nang le MIFARE Proximity Card Reader, CR-MF5, Keypad e nang le MIFARE Proximity Card Reader, MIFARE Proximity Card Reader, Proximity Card, Reader |