ROHM TLR728G-LB Noise Rail to Rail Input and Output High Speed ​​​​CMOS Ampmoqhobi

Litlhaloso tsa Sehlahisoa

• Lebitso la Sehlahiswa: ROHM Tharollo Simulator
• Likaroloana: Kopo e Tlase le Lerata le Tlaase Terene e eang ho Rail/Output High Speed ​​​​CMOS Operational Amplifiers

Litaelo tsa Tšebeliso ea Sehlahisoa

Ketsiso Schematic
Setšoantšo sa 1 se bonts'a moralo oa ketsiso bakeng sa karabelo ea khafetsa ka Op-Amp joalo ka ntho e sa fetoheng ampmoqhobi.

Mokhoa oa ho Etsisa
Litlhophiso tsa ho etsisa li ka hlophisoa ho menu ea 'Simulation Settings' joalokaha ho bontšoa ho Setšoantšo sa 2. Letlapa la 1 le bonts'a ho seta ho tloaelehileng ha papiso.
Ketsiso Settings

• Mofuta oa Ketsiso: Frequency-Domain
• Maqhubu a ho Qala - Maqhubu a ho Felisa: 0 Hz - 100 MHz
• Likhetho tse tsoetseng pele: Ketsiso Resolution, Convergence Thuso
• Likhetho tse etsoang ka letsoho: .tempe 27

Ketsiso Maemo
Lethathamo la 2 le thathamisa liparamente tsa boemo ba papiso, ho kenyeletsoa lebitso la mohlala, mofuta, le liparamente tsa voltagmehloli ea e le Op-Amp.

Op-Amp Mohlala
Letlapa la 3 le bonts'a mesebetsi ea phini ea mohlala bakeng sa Op-Amp ketsiso, ho hlakisa litšobotsi tsa ho kenya/sephetho.

Likaroloana tsa Peripheral

Bili ea Lintho
Letlapa la 4 le thathamisa likarolo tse sebelisitsoeng moralong oa papiso, ho kenyeletsoa li-resistor le li-capacitor tse nang le boleng ba tsona ba kamehla le mefuta e fapaneng.

Lipotoloho tse lekanang tsa Capacitor
Setšoantšo sa 3 se bontša mohlophisi oa thepa ea capacitor le potoloho e lekanang, ho hlokomela hore boleng ba kamehla ba ESR ke 2m.

LIEKETSENG

• Potoloho ena e etsisa karabelo ea khafetsa ka Op-Amp joalo ka ntho e sa fetoheng ampmoqhobi. U ka bona phaello ea AC le karolo ea karo-karolelano ea tlhahiso ho ea ho voltage ha mohloli oa ho kenya voltage AC frequency e fetotsoe. U ka etsa litlhophiso tsa likarolo tse bontšitsoeng ka boputsoa, ​​​​joalo ka VSOURCE kapa likarolo tsa peripheral, 'me u etsise tse sa fetoheng. amplifier e nang le boemo bo batloang ba ho sebetsa.
• Tlalehong e hatisitsoeng ea kopo, o ka etsisa potoloho: Ts'ebetso amplifier, Comparator (Thuto). [JP] [EN] [CN] [KR]

Litlhokomeliso tse akaretsang

• Tlhokomeliso 1: Litefiso tse tsoang liphethong tsa papiso ha lia tiisetsoa. Ka kopo sebelisa liphetho tsena e le tataiso bakeng sa moralo oa hau.
• Tlhokomeliso 2: Litšobotsi tsena tsa mohlala li hlile li ho Ta=25°C. Ka hona, sephetho sa papiso e nang le phapang ea mocheso e ka 'na ea fapana haholo le sephetho le se entsoeng ka boto ea sebele ea kopo (tekanyo ea sebele).
• Tlhokomeliso 3: Ka kopo sheba Tlhahisoleseling ea Kopo ea Op-Amps bakeng sa lintlha tsa lintlha tsa tekheniki.
• Tlhokomeliso 4: Litšobotsi li ka fetoha ho latela moralo oa 'nete oa boto,' me ROHM e khothaletsa ka matla ho hlahloba litšobotsi tseo habeli ka boto ea 'nete moo li-chips li tla beoa teng.

Ketsiso Schematic

Mokhoa oa ho etsisa

• Litlhophiso tsa papiso, joalo ka ho fiela liparamente kapa likhetho tsa ho kopanya, li ka lokisoa ho tsoa ho 'Litlhophiso tsa Ketsiso' tse bontšitsoeng ho Sets'oants'o sa 2, 'me Letlapa la 1 le bonts'a litlhophiso tsa kamehla tsa papiso.
• Haeba ho na le bothata ba ho kopanya, u ka fetola likhetho tse tsoetseng pele ho e rarolla. Thempereichara e behiloe ho 27 °C polelong ea kamehla ho 'Likhetho tsa Manual'. U ka e fetola.

  

  Mekhahlelo	Ea kamehla	Hlokomela
  Mofuta wa Ketsiso	Frequency-Domain	Se ke oa fetola Mofuta oa Simulation
  Qala Frequency	0 Hz	Etsisa karabelo ea maqhubu bakeng sa sebaka sa maqhubu ho tloha ho 0 Hz ho isa ho 100 MHz.
  Felisa Frequency	100Meg Hz
  Dikgetho tse tsoetseng pele	Ketsiso Qeto	1e-7
  	Thuso ea Convergence	–
  Likhetho tsa Manual	.tempe 27	–

Ketsiso Maemo

Mohlala Lebitso	Mofuta	Mekhahlelo	Boleng ba kamehla	Range e feto-fetohang		Diyuniti
				Min	Max
MOHLOLI	MoqtagMohloli	Moqtage_level	2.5	0	5.5	V
		AC_magnitude	180m	mahala		V
		AC_mohato	0.0	tsitsitseng		°
VDD	Moqtage Mohloli oa Op-Amp	Moqtage_level	5	2.5(Tlhokomeliso1)	5.5(Tlhokomeliso1)	V
		AC_magnitude	0.0	tsitsitseng		V
		AC_mohato	0.0	tsitsitseng		°
VREF	MoqtagMohloli	Moqtage_level	2.5	VSS	VDD	V
		AC_magnitude	0.0	tsitsitseng		V
		AC_mohato	0.0	tsitsitseng		°

(Tlhaloso ea 1) E behe molemong oa ts'ebetso e netefalitsoeng ea Op-Amps.

Op-Amp mohlala

Letlapa la 3 le bonts'a ts'ebetso ea pini ea mohlala e kentsoeng tšebetsong. Hlokomela hore Op-Amp mohlala ke mohlala oa boitšoaro bakeng sa litšoaneleho tsa eona tsa ho kenya / sephetho, 'me ha ho lipotoloho tsa tšireletso kapa mesebetsi e sa amaneng le morero e kenngoeng tšebetsong.

Pin Lebitso	Tlhaloso
+IN	Ketso e sa fetoheng
-KA HO	Keno e kenang
VDD	Phepelo e ntle ea motlakase
VSS	Negative power supply/ Sebaka
TSOA	Sephetho

Likaroloana tsa Peripheral

Bili ea Lintho
Letlapa la 4 le bonts'a lethathamo la likarolo tse sebelisitsoeng ho schematic ea ketsiso. E 'ngoe le e' ngoe ea li-capacitor e na le liparamente tsa potoloho e lekanang e bontšitsoeng ka tlase. Litekanyetso tsa kamehla tsa likarolo tse lekanang li behiloe ho zero ntle le ESR ea C. U ka fetola litekanyetso tsa karolo ka 'ngoe.

Mofuta	Mohlala Lebitso	Boleng ba kamehla	Range e feto-fetohang		Diyuniti
			Min	Max
Mohanyetsi	R2_1	10k	1k	1M	Ω
	R2_2	10k	1k	1M	Ω
	RL2	10k	1k	1M, NC	Ω
Capacitor	C2_1	10	0.1	100	pF
	CL2	25	mahala, NC		pF

Lipotoloho tse lekanang tsa Capacitor

Boleng ba kamehla ba ESR ke 2 mΩ.
(Tlhokomeliso 2) Mekhahlelo ena e ka nka boleng leha e le bofe bo nepahetseng kapa zero ka papiso, empa ha e tiise ts'ebetso ea IC maemong afe kapa afe. Sheba database ho fumana boleng bo lekaneng ba li-parameter.

Lihlahisoa tse khothalelitsoeng

Op-Amp

• TLR728G-LB: Lerata le tlase le lerata le tlase la Seporo ho isa ho Rail / Output High Speed ​​​​CMOS Op-Amps. [JP] [EN] [CN] [KR] [TW] [DE]
• Lingoliloeng tsa Tekheniki le Lisebelisoa li ka fumaneha ho Lisebelisoa tsa Moralo sehlahiswang web leqephe.

Hlokomela

1. Tlhahisoleseding e fuperoeng ke tokomane ena e reretsoe ho hlahisa lihlahisoa tsa ROHM Group (tseo hamorao li tla bitsoa ROHM). Ha u sebelisa lihlahisoa tsa ROHM, ka kopo netefatsa lintlha tsa morao-rao kapa li-database pele u li sebelisa.
2. Lihlahisoa tsa ROHM li entsoe le ho etsoa hore li sebelisoe lisebelisoa tsa elektroniki le lits'ebetso tse akaretsang (joalo ka lisebelisoa tsa Audio Visual, lisebelisoa tsa Office Automation, lisebelisoa tsa mehala ea mehala, lisebelisoa tsa lapeng, lisebelisoa tsa boithabiso, joalo-joalo) kapa tse boletsoeng libukeng. Ka hona, ka kopo ikopanye le moemeli oa thekiso ea ROHM pele o sebelisa lihlahisoa tsa ROHM ka thepa kapa lisebelisoa tse hlokang botšepehi bo phahameng ka ho fetisisa le tseo ho hlōleha kapa ho se sebetse ho ka baka kotsi kapa kotsi bophelong ba motho kapa 'mele kapa tšenyo e' ngoe e tebileng (e kang lisebelisoa tsa bongaka, lipalangoang, sephethephethe, lifofane. , lifofa-sebakeng, lilaoli tsa matla a nyutlelie, taolo ea mafura, thepa ea likoloi ho kenyeletsoa lisebelisoa tsa koloi, joalo-joalo ka mor'a mona tse bitsoang Likopo Tse Khethehileng). Ntle le haeba ho lumellanoe ka mokhoa o mong ka lengolo ke ROHM esale pele, ROHM e ke ke ea jara boikarabelo ka tsela leha e le efe kapa ba ikarabella bakeng sa litšenyehelo, litšenyehelo, kapa litahlehelo tse bakiloeng ke uena kapa batho ba bang ka lebaka la tšebeliso ea Lihlahisoa tsa ROHM bakeng sa Likopo tse Khethehileng.
3. Likarolo tsa elektronike, ho kenyelletsa le li-semiconductors, li ka hloleha kapa tsa se sebetse ka lebelo le itseng. Ka kopo, etsa bonnete ba ho kenya ts'ebetsong, boikarabelong ba hau, mehato e lekaneng ea tšireletso, ho kenyelletsa empa e sa felle feela ho moralo o sireletsehileng khahlanong le kotsi ea 'mele, le tšenyo ea thepa leha e le efe, e ka bakang ho hlōleha kapa ho se sebetse hantle ha lihlahisoa.
4. Lintlha tse teng tokomaneng ena, ho kenyelletsa le potoloho ea kopo examples le li-constants tsa bona, li reretsoe ho hlalosa ts'ebetso e tloaelehileng le ts'ebeliso ea lihlahisoa tsa ROHM. Ha ea rereloa ho netefatsa, ka ho hlaka kapa ka mokhoa o sa tobang, ts'ebetso ea sehlahisoa ka har'a thepa ea sebele eo se tla sebelisoa ho eona. Ka lebaka leo, ke uena feela ea ikarabellang bakeng sa eona, 'me u tlameha ho sebelisa boikemelo ba hau bo ikemetseng le kahlolo ha u sebelisa boitsebiso bo joalo bo fuperoeng ke tokomane ena. ROHM e ke ke ea ikarabella ka tsela efe kapa efe kapa ea ikarabella bakeng sa litšenyehelo, litšenyehelo, kapa tahlehelo e bakiloeng ke uena kapa batho ba boraro ka lebaka la tšebeliso ea tlhahisoleseling e joalo.
5. Ha o romela dihlahiswa kapa thekenoloji ya ROHM e hlalositsweng tokomaneng ena dinaheng tse ding, o tlameha ho latela ditsamaiso le ditokisetso tse boletsweng melaong le melawana e sebetsang ya thomelontle, tse kang Molao wa Ditjhelete le Dikgwebo tsa Kantle ho Naha le Melao ya Tsamaiso ya Tsamaiso ya Diyantle tsa US, mme o latele ditsamaiso tse hlokahalang tlasa dipehelo tsena.
6. Lintlha tsa tekheniki le lintlha tse hlalositsoeng tokomaneng ena, ho kenyelletsa le lipotoloho tse tloaelehileng tsa ts'ebeliso, ke tsa peleamptse ling feela 'me ha lia rereloa ho netefatsa hore motho ha a na tlōlo ea molao ea thepa ea bohlale ea batho ba bang kapa litokelo tse ling. ROHM ha e fane ka lengolo leha e le lefe, ho hlalosa kapa ho fana ka maikutlo, ho kenya ts'ebetsong, ho sebelisa, kapa ho tlatlapa thepa leha e le efe ea bohlale kapa litokelo tse ling tse nang le kapa tse laoloang ke ROHM kapa batho leha e le bafe ba boraro mabapi le boitsebiso bo fanoeng mona.
7. Ha ho karolo ea tokomane ena e ka hatisoang bocha kapa ho hlahisoa hape ka mokhoa ofe kapa ofe ka mokhoa ofe kapa ofe ntle le tumello e ngotsoeng pele ho ROHM.
8. Lintlha tsohle tse tokomaneng ena ke tsa morao-rao ho tloha ka letsatsi la phatlalatso 'me li ka fetoha ntle le tsebiso. Pele u reka kapa u sebelisa lihlahisoa tsa ROHM, ka kopo netefatsa lintlha tsa morao-rao le moemeli oa thekiso oa ROHM.
9. ROHM ha e fane ka tiiso ea hore tlhahisoleseling e fanoeng mona ha e na liphoso. ROHM e ke ke ea jara boikarabelo ka tsela efe kapa efe kapa ho ikarabella bakeng sa litšenyehelo, litšenyehelo, kapa tahlehelo e bakiloeng ke uena kapa batho ba bang ka lebaka la liphoso tse teng tokomaneng ena.

https://www.rohm.com/contactus

Lipotso tse atisang ho botsoa (FAQ)

• A na nka fetola liparamente tsa likarolo tsa papiso?
  Ee, o ka etsa litlhophiso tsa likarolo tse bonts'itsoeng ka boputsoa, ​​​​joalo ka VSRCE kapa likarolo tsa peripheral, ho etsisa mokhoa o sa fetoheng. amplifier e nang le maemo a batlang a ts'ebetso.
• Mofuta oa papiso ea kamehla ke ofe?
  Mofuta oa papiso ea kamehla ke Frequency-Domain ho sekaseka karabo ea khafetsa ho tloha ho 0 Hz ho isa ho 100 MHz.

Litokomane / Lisebelisoa

ROHM TLR728G-LB Noise Rail to Rail Input and Output High Speed ​​​​CMOS Ampmoqhobi [pdf] Bukana ea Mosebelisi TLR728G-LB, TLR728G-LB Seporo sa Lerata ho ea ho Kenyelletso ea Seporo le se hlahisoang ka lebelo le phahameng CMOS Amplifier, Noise Rail to Rail Input le Output High Speed ​​CMOS Amplifier, Input le Output High Speed ​​CMOS Amplifier, High Speed ​​CMOS Ampsetsi sa thepa, CMOS Ampmoqhobi

Litšupiso

• Bukana ea Mosebelisi