ROHM TLR377GYZ Non Inverting Pulse Input Transient Response Response AmpTataiso ea mosebelisi ea lifier

Potoloho ena e etsisa karabelo ea nakoana ho pulse input le non-inverting amplifier configured Op Amps. O ka bona ho feto-fetoha ha phallo ea voltage ha ho kenya voltage fetoha ka tšohanyetso. U ka etsa litlhophiso tsa likarolo tse bontšitsoeng ka boputsoa, ​​​​joalo ka VSOURCE, kapa likaroloana tsa peripheral, 'me u etsise li-non-inverting. amplifier e nang le boemo bo batloang ba ho sebetsa.

U ka etsisa potoloho ho tsebiso ea kopo e hatisitsoeng: Ts'ebetso amplifier, Comparator (Thuto). [JP] [EN] [CN] [KR]

Litlhokomeliso tse akaretsang

Tlhokomeliso 1: Litefiso tse tsoang liphethong tsa papiso ha lia tiisetsoa. Ka kopo sebelisa liphetho tsena e le tataiso bakeng sa moralo oa hau.
Tlhokomeliso 2: Litšobotsi tsena tsa mohlala li hlile li ho Ta=25°C. Kahoo, sephetho sa papiso e nang le phapang ea mocheso e ka 'na ea fapana haholo le sephetho le se entsoeng ka boto ea sebele ea kopo (tekanyo ea sebele).
Tlhokomeliso 3: Ka kopo sheba lengolo la Kopo la Op-Amps bakeng sa lintlha tsa lintlha tsa tekheniki.
Tlhokomeliso 4: Litšobotsi li ka fetoha ho latela moralo oa 'nete oa boto mme ROHM e khothaletsa ka matla ho lekola litšoaneleho tseo habeli ka boto ea 'nete moo li-chips li tla beoa ho tsona.

Ketsiso Schematic

Setšoantšo sa 1. Ketsiso Schematic

Mokhoa oa ho etsisa

Litlhophiso tsa papiso, joalo ka ho fiela liparamente kapa likhetho tsa ho kopanya, li ka lokisoa ho tsoa ho 'Litlhophiso tsa Ketsiso' tse bontšitsoeng ho Sets'oants'o sa 2, 'me Letlapa la 1 le bonts'a litlhophiso tsa kamehla tsa papiso.

Haeba ho na le bothata ba ho kopana ha simulation, o ka fetola likhetho tse tsoetseng pele ho li rarolla. Thempereichara e behiloe ho 27 °C polelong ea kamehla ho 'Likhetho tsa Manual'. U ka e fetola.

Setšoantšo sa 2. Ketsiso ea Litlhophiso le ho phethahatsa

Tafole 1. Li-setting tsa ketsiso tsa kamehla

Mekhahlelo	Ea kamehla	Hlokomela
Mofuta wa Ketsiso	Nako-Domain	Se ke oa fetola Mofuta oa Simulation
Nako ea ho Qetela	500µs	–
Dikgetho tse tsoetseng pele	E leka-lekaneng	–
	Thuso ea Convergence	–
Likhetho tsa Manual	.tempe 27	–

Ketsiso Maemo

Lethathamo la 2. Lethathamo la litekanyetso tsa boemo ba papiso

Mohlala Lebitso	Mofuta	Mekhahlelo	Boleng ba kamehla	Range e feto-fetohang		Diyuniti
				Min	Max
MOHLOLI	MoqtagMohloli	Boleng_ba_ba pele	1.5	0	5.5	V
		Pulse_value	3.5	0	5.5	V
		rampnako_ya pele_ho_ho otla	2	mahala		µs
		ramptime_pulse_to_initial	2	mahala		µs
		Qala_tieho	10u	mahala		µs
		Pulse_width	50	mahala		µs
		Nako	100	mahala		µs
VDD	Moqtage Mohloli oa Op-Amp	Moqtage_level	5	1.8(Tlhokomeliso1)	5.5(Tlhokomeliso1)	V
		AC_magnitude	0.0	tsitsitseng		V
		AC_mohato	0.0	tsitsitseng		°
VREF	MoqtagMohloli	Moqtage_level	2.5	VSS	VDD	V
		AC_magnitude	0.0	tsitsitseng		V
		AC_mohato	0.0	tsitsitseng		°
SDNB	Moqtage Mohloli oa Litlhophiso tsa Shutdown	Boleng_ba_ba pele	5	VSS	VDD	V
		Pulse_value	0	VSS	VDD	V
		rampnako_ya pele_ho_ho otla	100	mahala		ns
		ramptime_pulse_to_initial	100	mahala		ns
		Qala_tieho	250	mahala		µs
		Pulse_width	500	mahala		µs
		Nako	1	1	–	ms

(Tlhaloso ea 1) E behe molemong oa ts'ebetso e netefalitsoeng ea Op-Amps.

Ho theha paramente ea VSOURCE

Setšoantšo sa 3 se bonts'a hore na li-parameter tsa VSOURCE li lumellana joang le VIN stimulus waveform.

Setšoantšo sa 3. VSOURCE parameters le waveform ea eona

Op-Amp mohlala

Letlapa la 3 le bonts'a ts'ebetso ea pini ea mohlala e kentsoeng tšebetsong. Hlokomela hore Op-Amp mohlala ke mohlala oa boitšoaro bakeng sa litšoaneleho tsa eona tsa ho kenya / sephetho, 'me ha ho lipotoloho tsa tšireletso kapa mesebetsi e sa amaneng le morero e kenngoeng tšebetsong.

Lethathamo la 3. Op-Amp lithakhisa tsa mohlala tse sebedisoang bakeng sa ketsiso

Pin Lebitso	Tlhaloso
+IN	Ketso e sa fetoheng
-KA HO	Keno e kenang
VDD	Phepelo e ntle ea motlakase
VSS	Negative power supply/ Sebaka
TSOA	Sephetho
SDNB	Ho koala setlhophiso

Likaroloana tsa Peripheral

Bili ea Boitsebiso
Table 4 shows the list of components used in the simulation schematic. Each of the capacitors has the parameters of equivalent circuit shown below. The default values of equivalent components are set to zero except for the ESR of C. O ka fetola boleng ba karolo ka 'ngoe.

Lethathamo la 4. Lethathamo la li-capacitor tse sebelisoang potolohong ea ho etsisa

Mofuta	Mohlala Lebitso	Boleng ba kamehla	Range e feto-fetohang		Diyuniti
			Min	Max
Mohanyetsi	R2_1	10k	1k	1M	Ω
	R2_2	10k	1k	1M	Ω
	RL2	10k	1k	1M, NC	Ω
Capacitor	C2_1	10	10	100	pF
	CL2	10	mahala, NC		pF

Lipotoloho tse lekanang tsa Capacitor

(a) Mohlophisi oa thepa

(b) Potoloho e lekanang

Setšoantšo sa 4. Mohlophisi oa thepa ea Capacitor le potoloho e lekanang

Boleng ba kamehla ba ESR ke 2m Ω.
(Tlhaloso ea 2) Mekhahlelo ena e ka nka boleng bofe kapa bofe bo nepahetseng kapa zero ka papiso empa ha e tiise ts'ebetso ea IC maemong afe kapa afe. Sheba database ho fumana boleng bo lekaneng ba li-parameter.

Lihlahisoa tse khothalelitsoeng

Op-Amp
TLR377GYZ : Sephutheloana se Senyane sa Ultra & Sepetlele se Phahameng ka ho Fetisisa sa Terene ho isa ho Terene/Se hlahisoang ke CMOS Ampmoqhobi. [JP] [EN] [CN] [KR] [TW] [DE]

Lingoliloeng tsa Tekheniki le Lisebelisoa li ka fumaneha ho Lisebelisoa tsa Moralo sehlahiswang web leqephe.

Hlokomela

1. Tlhahisoleseding e hlahang tokomaneng ena e reretsoe ho hlahisa lihlahisoa tsa ROHM Group (tseo ho thoeng ke ROHM). Ha u sebelisa lihlahisoa tsa ROHM, ka kopo netefatsa lintlha tsa morao-rao kapa li-database pele u li sebelisa.
2. Lihlahisoa tsa ROHM li entsoe le ho etsoa hore li sebelisoe lisebelisoa tsa elektroniki le lits'ebetso tse akaretsang (joalo ka lisebelisoa tsa Audio Visual, lisebelisoa tsa Office Automation, lisebelisoa tsa mehala ea mehala, lisebelisoa tsa lapeng, lisebelisoa tsa boithabiso, joalo-joalo) kapa tse boletsoeng libukeng. Ka hona, ka kopo ikopanye le moemeli oa thekiso ea ROHM pele o sebelisa lihlahisoa tsa ROHM ka thepa kapa lisebelisoa tse hlokang botšepehi bo phahameng ka ho fetisisa le tseo ho hlōleha kapa ho se sebetse ho ka baka kotsi kapa kotsi bophelong ba motho kapa 'mele kapa tšenyo e' ngoe e tebileng (e kang lisebelisoa tsa bongaka, lipalangoang, sephethephethe, lifofane. , lifofa-sebakeng, lilaoli tsa matla a nyutlelie, taolo ea mafura, thepa ea likoloi ho kenyeletsoa lisebelisoa tsa koloi, joalo-joalo ka mor'a mona tse bitsoang Likopo Tse Khethehileng). Ntle le haeba ho lumellanoe ka mokhoa o mong ka lengolo ke ROHM esale pele, ROHM e ke ke ea jara boikarabelo ka tsela leha e le efe kapa ba ikarabella bakeng sa litšenyehelo, litšenyehelo, kapa litahlehelo tse bakiloeng ke uena kapa batho ba bang ka lebaka la tšebeliso ea Lihlahisoa tsa ROHM bakeng sa Likopo tse Khethehileng.
3. Likarolo tsa elektronike, ho kenyelletsa le li-semiconductors, li ka hloleha kapa tsa se sebetse ka lebelo le itseng. Ka kopo, etsa bonnete ba ho kenya ts'ebetsong, boikarabellong ba hau, mehato e lekaneng ea ts'ireletso e kenyelletsang empa e sa felle feela ho moralo o sireletsehileng khahlanong le kotsi ea 'mele, le tšenyo ea thepa efe kapa efe, e ka bakang ho hloleha kapa ho se sebetse hantle ha lihlahisoa.
4. Lintlha tse teng tokomaneng ena, ho kenyelletsa le potoloho ea kopo examples le li-constants tsa bona, li reretsoe ho hlalosa ts'ebetso e tloaelehileng le ts'ebeliso ea lihlahisoa tsa ROHM, 'me ha e reretsoe ho tiisa, ebang ke ka ho hlaka kapa ka mokhoa o hlakileng, ts'ebetso ea sehlahisoa ka thepa ea sebele eo e tla sebelisoa. Ka lebaka leo, ke uena feela ea ikarabellang bakeng sa eona, 'me u tlameha ho sebelisa netefatso ea hau e ikemetseng le kahlolo mabapi le tšebeliso ea lintlha tse joalo tse teng tokomaneng ena. ROHM e ke ke ea ikarabella ka tsela efe kapa efe kapa ea ikarabella bakeng sa litšenyehelo, litšenyehelo, kapa tahlehelo e bakiloeng ke uena kapa batho ba boraro ka lebaka la tšebeliso ea tlhahisoleseling e joalo.
5. Ha o romela dihlahiswa kapa thekenoloji ya ROHM e hlalositsweng tokomaneng ena ho ya dinaheng tse ding, o tlameha ho latela ditsamaiso le dipehelo tse boletsweng melaong le melawana e sebetsang ya thomelontle, jwalo ka Foreign Exchange le Foreign Trade Act le US Export Administration Regulations, mme o latele mekhoa e hlokahalang ho latela lipehelo tsena.
6. Lintlha tsa tekheniki le lintlha tse hlalositsoeng tokomaneng ena, ho kenyelletsa le lipotoloho tse tloaelehileng tsa ts'ebeliso, ke tsa peleamptse ling feela 'me ha lia rereloa ho fana ka tiisetso ea ho ba ntle ho tlolo ea molao ea thepa ea bohlale ea batho ba bang kapa litokelo tse ling. ROHM ha e fane ka laesense leha e le efe, ho hlalosa kapa ho fana ka maikutlo, ho kenya ts'ebetsong, ho sebelisa, kapa ho tlatlapa thepa leha e le efe ea bohlale kapa litokelo tse ling tse nang le kapa tse laoloang ke ROHM kapa batho leha e le bafe ba boraro mabapi le boitsebiso bo fanoeng mona.
7. Ha ho karolo ea tokomane ena e ka hatisoang bocha kapa ho hlahisoa hape ka mokhoa ofe kapa ofe ka mokhoa ofe kapa ofe ntle le tumello e ngotsoeng pele ho ROHM.
8. Lintlha tsohle tse tokomaneng ena ke tsa morao-rao ho tloha ka letsatsi la phatlalatso 'me li ka fetoha ntle le tsebiso. Pele u reka kapa u sebelisa lihlahisoa tsa ROHM, ka kopo netefatsa lintlha tsa morao-rao le moemeli oa thekiso oa ROHM.
9. ROHM ha e fane ka tiiso ea hore tlhahisoleseling e fanoeng mona ha e na liphoso. ROHM e ke ke ea jara boikarabelo ka tsela efe kapa efe kapa ho ikarabella bakeng sa litšenyehelo, litšenyehelo, kapa tahlehelo e bakiloeng ke uena kapa batho ba bang ka lebaka la liphoso tse teng tokomaneng ena.

Rea leboha ka ho fihlella litaba tsa sehlahisoa sa ROHM.
Lintlha tse ling mabapi le sehlahisoa le li-catalogs li teng, ka kopo ikopanye le rona.

ROHM Customer Support System
https://www.rohm.com/contactus

www.rohm.com
© 2023 ROHM Co., Ltd. Litokelo tsohle li sirelelitsoe.

Litokomane / Lisebelisoa

ROHM TLR377GYZ Non Inverting Pulse Input Transient Response Response Ampmoqhobi [pdf] Bukana ea Mosebelisi TLR377GYZ, TLR377GYZ Non Inverting Pulse Input Transient Response Response AmpLifier, Non Inverting Pulse Input Transient Response Simulation AmpLifier, Ketsiso ea Karabelo ea Nakoana AmpLifier, Ketsiso ea Karabelo ea Nakoana AmpLifier, Ketsiso ea Karabelo Ampsefepi, Ampmoqhobi

Litšupiso

• Bukana ea Mosebelisi