Lisebelisoa tsa ROGA VC-02 Vibration Calibrator

Lintlha: Joaloka sesebelisoa se nepahetseng, etsa bonnete ba hore u bala bukana ka hloko pele u e sebelisa. Nako ea tiisetso ke likhoeli tsa 18, haeba ho na le mathata, ka kopo ikopanye le rona.

Fetileview

VC-02 vibration calibrator e na le sensor e tloaelehileng, lijenereithara tsa matšoao, matla ampli-lifiers, boemo ba matšoao le potoloho ea pontšo ea digital control e nang le mohaho o monyenyane, o tiileng le o tsitsitseng. Ke sesebelisoa sa vibrate se sebetsang ka botlalo bakeng sa lebala la liindasteri kapa laboratori; Ho nepahala ho phahameng, ts'ebetso e bonolo, e bonolo ho e sebelisa. E ka khona ho lekanya mefuta e fapaneng ea li-sensor tsa vibration joalo ka li-acceleration sensors, li-sensor tsa lebelo la makenete le li-sensor tsa eddy displacement, le ho lekola lits'ebetso tse ling tsa ho lekola ho thothomela le sistimi ea ho fumana data.

Litlhaloso tsa Tekheniki

1. Ho nepahala: ± 5%
2. Maqhubu a lets'oao la vibration: 10Hz-10kHz (letšoao la sinusoidal),
3. ho nepahala ha maqhubu: <0.05Hz
4. Boholo ba Mojaro: 200 g
5. mofuta oa sensor e lekantsoeng:
   • Li-Accelerometers tsa Mokhoa oa Charge
     IEPE Mode Accelerometers
     Moqtage Output Mode Accelerometers
   • 4-20mA Output Mode Accelerometers kapa Velocity Sensors
   • Eddy Displacement Sensors
6. Boholo bo Kenyellelitsoeng Range:
   Mokhoa oa ho lefisa: ± 3000pC; 2.5.2
   Moqtage(IEPE) Mokhoa: ± 3000mV
7. Ho thothomela Ampmefuta ea litute (RMS):
   Ho potlakisa: 50.00m/s2 2.6.2
   Lebelo : 150.00 mm/s 2.6.3
   Sebaka sa ho falla: 1500m
8. Boholo ba Vibration Amplitude & Maximum Mojaro
   Bakeng sa VC-02 e nyane, ka hona, ho lekanyetsoa ha li-sensor tse fapaneng ka maqhubu a fapaneng (boima bo fapaneng), calibrator e ka hlahisa. ampthuto ha e tšoane. Boholo ba vibrate amplitude le boholo ba mojaro ka lebelo le itseng, ke ka tsela e latelang: Litekanyetso tsohle

ke RMS.

Laela Khafetsa	≤100grams			≤200 dikgerama
	a(m/S2)	v(mm/S)	d(μm)	a(m/S2)	v(mm/S )	d(μm)
10Hz	10	100	150 0	10	100	150 0
20Hz	20	150	120 0	20	150	1200
40Hz	50	200	800	30	100	500
80Hz	50	100	200	30	60	120
160Hz	50	50	50	30	30	30
320Hz	50	25	12	30	15	7
640Hz	50	12	3	40	10	2.5
1kHz	50	8	*	40	6	*
2kHz	50	4	*	30	2.4	*
4kHz	50	2	*	30	*	*
6kHz	50	*	*	30	*	*
8kHz	50	*	*	30	*	*
10kHz	50	*	*	30	*	*

• Ka maqhubu a phahameng, boleng ba vibrate ea velocity le displacement bo nyane haholo.

Mounting Type M5 screw
Mocheso o sebetsang: 0 ho +55; Mongobo Boholo 95% RH
Phepelo ea MatlaAC220V ±10% 5060Hz
Boholo ba 300mm×210mm×130mm
Boima ba 'mele bo ka bang 6.5Kg

Mokhoa oa ho Sebetsa

Setšoantšo sa Panel

1. Sokete ea motlakase: hokela phepelo ea motlakase ea AC 220V;
2. Power switjha: Sesebelisoa sa matla sa AC 220V
3. Lisebelisoa tsa USB: Hokela PC bakeng sa taolo ea vibrate ka software;
4. Setsi sa tlhahiso ea sensor ea tlhahlobo: tlhahiso ea sensor ea tlhahlobo e ka lekanyetsoa ka metha e mengata ea dijithale kapa lisebelisoa tse ling ka sokete ena;
5. Li-screws tsa li-sensor tsa eddy: borakete ea teko e ka behoa holim'a sesebelisoa sa calibration ka masoba a screw bakeng sa ho hlahloba li-sensor tsa hona joale tsa eddy;
6. Tafole: bakeng sa ho lokisa li-sensor tse fetotsoeng;
7. Sesebelisoa sa ho kenya: kopanya tlhahiso ea li-sensor tse fetotsoeng
8. 4 ~ 20mA li-terminals tsa ho kenya: hokela tlhahiso ea li-sensor tsa 4 20mA tse hlahisoang;
9. -24V matla a motlakase: fana ka matla a ho lekola li-sensor tse kang li-eddy sensors
10. Ho thothomela ampkotola ea ho fetola litude
11. Ho thothomela ampkotola ea ho fetola litude
12. Knob ea phetoho ea maqhubu a vibration 13. Fensetere ea LCD

Mehato ea Ts'ebetso

1. Mount Sensor
   
   1. Sensor (Acceleration or Velocity) kenya: beha sekoti sa M5, sensor e tsitsitseng tafoleng ka ho latellana. Li-sensor tse fapaneng, ka linako tse ling li hloka ho sebelisa screw e tsamaisanang le phetoho;
   2. Sesebelisoa sa sensor ea eddy: Beha benchmark holim'a poleiti ea teko, eddy sensor e tsitsitseng suite ka tatellano;
      
   3. Ha u lekanya, beha calibrator e tsitsitse ka hohle kamoo ho ka khonehang. Ha o fetola sensor, o hloka ho tima phepelo ea motlakase. Ka mor'a ho lekanya, sensor e lokela ho tlosoa bakeng sa ho qoba sensor e setseng nako e telele tafoleng.
2. Khokahano ea Cable
   1. Calibrator e ka lekanya le ho bonts'a boleng ba tlhahiso ea sensor e lekantsoeng, kahoo tlhahiso ea sensor ena joalo ka mokhoa oa ho tjhaja, mokhoa oa IEPE le Vol.tagMokhoa oa e o ka hokahanngoa le soketeng ea sesebelisoa sa ho kenya matšoao (BNC);
   2. Bakeng sa tlhahiso ea 4-20 mA sensor, ka kopo, hokela lets'oao ho "4-20 mA" terminal, sesebelisoa sa ka hare sa calibration se bontšitsoe ka tlase.
      
   3. Bakeng sa sensor ea eddy displacement, calibrator e ka fana ka matla ho ea peleampsefepi; Terminal e tala ke -24VDC, e ntšo ke 0V; Le tlhahiso ea peleamplifier hokela soketeng ea matšoao ea BNC;
   4. Haeba u na le tšepo ea ho lekanya lets'oao la tlhahiso ea sensor e fetotsoeng, ka kopo sheba socket ea sensor output signal (BNC); Bakeng sa lets'oao lena le ka fetoloa ka boiketsetso ke calibrator, kahoo lets'oao la tlhahiso le lokela ho ba joalo ampe behiloe X1 kapa X10.
   5. Hokela ho Matla a AC: Ka kopo netefatsa hore motlakase oa AC o lokela ho ba 220 V / 50 Hz;
   6. Haeba u na le tšepo ea ho sebetsa ka PC, hokela calibrator ho PC ka thapo e le 'ngoe ea USB.
3. Ts'ebetso ea Ts'ebetso
   Kamora ho hlahloba likhoele le li-sensor li lokisoe ka nepo, bulela matla 'me LCD e tla hlaha ka tsela e latelang:
   
   1. Sensor Type e ka khetha mofuta oa sensor e lekiloeng joalo ka Acceleration, Velocity le Displacement. Mofuta oa ho Kena: khetha mofuta oa ho kenya oa sensor e lekiloeng joalo ka PE(Mokhoa oa Charge), Mokhoa oa IEPE, Vol.tage Mode le 4-20mA Mode ea tlhahiso.
      Mokhoa oa ho beha: Tobetsa konopo e ka fetoha kapa
      Thaepa> 'me u hanyetse ho ea ka nako ea oache kapa ho ea ka tluoaneng lenopa lena la sebaka sa hajoale. e ka fetola mefuta
   2. Maqhubu a Vibration: Phetoho ea Maqhubu a Vibration
      Ipehela Method: Tobetsa konopo ho fetola boemo ba cursor; counter clockwise kapa clockwise lokisa konopo ena, seta maqhubu;
      Ho thothomela Amp: Ho thothomela Amptokiso ya thuto
      Mokhoa oa ho beha: Fetolela knob ena ho ea ka nako, e ka fokotsa ho thothomela amptsebo; 'Me Fetola konopo ena ho ea ka nako, e ka eketsa vibrate amptsebo. LCD e bonts'a Boleng bona ba RMS ba vibrate amptsebo. Ka kopo hlokomela amplitude ha e khone ho feta palo e kholo ea tlhahiso amptsebo; ha o qetile, ka kopo, seta ampthuto ho isa boemong bo tlase.
   3. Sephetho: tlhahiso ea li-sensor tse fetotsoeng, boleng ke RMS;
   4. Sens.: Kutloelo-bohloko ea sensor e lekantsoeng.

Ts'ebetso ea software

Ka kopo, sheba tataiso ea basebelisi ba software.

Lisebelisoa

1. Tataiso ea mosebelisi: 1
2. Setifikeiti :1
3. Lithapo Tse Kenang:4
4. Lithapo tse tsoang:1
5. Motlakase oa Motlakase:1

Litokomane / Lisebelisoa

Lisebelisoa tsa ROGA VC-02 Vibration Calibrator [pdf] Bukana ea Mosebelisi VC-02, Vibration Calibrator, VC-02 Vibration Calibrator

Litšupiso

• Bukana ea Mosebelisi