ROGA Instruments VC-02 Vibration Calibrator

Nco tseg: Raws li cov cuab yeej precision, nco ntsoov nyeem phau ntawv kom zoo ua ntej siv. Lub sijhawm lav yog 18 lub hlis, yog tias muaj teeb meem, thov hu rau peb.

Tshajview

VC-02 vibration calibrator muaj tus qauv sensor, teeb liab generators, hwj chim amplifiers, teeb liab txias thiab digital control display circuit nrog ib tug me me, khoom thiab ruaj khov qauv. Nws yog tag nrho-functions vibration calibrator rau industrial teb los yog kuaj; High precision, ua haujlwm yooj yim, siv tau yooj yim. Nws tuaj yeem ntsuas ntau hom kev vibration sensors xws li acceleration sensors, magnetic velocity sensors thiab eddy displacement sensors, thiab calibrate ib co vibration monitoring systems thiab data acquisition system.

Technical Specifications

1. Qhov tseeb: ± 5%
2. Vibration signal zaus: 10Hz-10kHz (sinusoidal teeb liab),
3. zaus qhov tseeb: <0.05 Hz
4. Maximum Load: 200 g ib
5. ntsuas sensor hom:
   • Charge hom Accelerometers
     IEPE Hom Accelerometers
     Voltage Output Mode Accelerometers
   • 4-20mA Output Hom Accelerometers lossis Velocity Sensors
   • Eddy Displacement Sensors
6. Maximum Input Range:
   Charge hom: ± 3000pC; 2.5.2
   Voltage (IEPE) Hom: ± 3000mV
7. Kev vibration AmpLitude range (RMS):
   Kev nrawm: 50.00m / s2 2.6.2
   Ceev: 150.00 mm/s 2.6.3
   Qhov siab: 1500m
8. Kev vibration siab tshaj plaws AmpLitude & Maximum Load
   Rau VC-02 yog me me, yog li cov calibration ntawm cov sensors sib txawv ntawm ntau zaus (qhov hnyav sib txawv), lub calibrator tuaj yeem tso tawm. amplitude tsis yog tib yam. Qhov siab kawg vibration amplitude thiab lub siab tshaj plaws load ntawm ib tug tej zaus, yog raws li nram no: tag nrho cov nqi

yog RMS.

Thauj khoom Ntau zaus	≤ 100 grams			≤ 200 grams
	ib (m / S2)	v (mm / S)	d (µm)	ib (m / S2)	v (mm/S )	d (µm)
10 Hz	10	100	150 0	10	100	150 0
20 Hz	20	150	120 0	20	150	1200
40 Hz	50	200	800	30	100	500
80 Hz	50	100	200	30	60	120
160 Hz	50	50	50	30	30	30
320 Hz	50	25	12	30	15	7
640 Hz	50	12	3	40	10	2.5
1 kHz	50	8	*	40	6	*
2 kHz	50	4	*	30	2.4	*
4 kHz	50	2	*	30	*	*
6 kHz	50	*	*	30	*	*
8 kHz	50	*	*	30	*	*
10 kHz	50	*	*	30	*	*

• Nyob rau hauv high zaus, qhov kev vibration tus nqi ntawm kev tshaj tawm thiab kev hloov pauv yog qhov tsawg heev.

Mounting Hom M5 ntsia hlau
Ua haujlwm kub: 0 ​​txog +55; Humidity siab tshaj 95% RH
Fais fab mov AC220V ± 10% 5060Hz
Loj: 300mm × 210mm × 130mm
Nyhav txog 6.5Kg

Yuav Ua Li Cas

Vaj Huam Sib Luag Diagram

1. Lub hwj chim input qhov (socket): txuas AC 220V fais fab mov;
2. Lub hwj chim hloov: AC 220V fais fab hloov
3. USB interfaces: Txuas lub PC rau kev co tswj los ntawm software;
4. Kev ntsuas qhov ntsuas hluav taws xob tso zis qhov (socket): qhov ntsuas ntsuas qhov ntsuas qhov tso zis tuaj yeem ntsuas los ntawm lub ntsuas hluav taws xob digital lossis lwm yam khoom siv los ntawm lub qhov (socket);
5. Lub mounting screws rau eddy sensors: qhov kev ntsuam xyuas bracket yuav mounted rau lub calibration ntsuas vaj huam sib luag ntawm cov ntsia hlau qhov rau kev ntsuam xyuas cov eddy tam sim no sensors;
6. Lub rooj: kho kho sensors;
7. Input socket: txuas cov zis ntawm cov hloov kho sensors
8. 4 ~ 20mA input terminals: txuas cov zis ntawm 4 20mA tso zis sensors;
9. -24V fais fab mov: muab lub zog rau kev sim cov sensors xws li eddy sensors
10. Kev vibration amplitude adjustment knob
11. Kev vibration amplitude adjustment knob
12. Kev vibration zaus hloov pob qhov rooj 13. LCD qhov rais

Cov kauj ruam ua haujlwm

1. Mounting Sensor
   
   1. Sensor (Acceleration los yog Velocity) installation: muab lub M5 ntsia hlau, sensor tsau rau ntawm lub rooj nyob rau hauv lem. Cov sensors sib txawv, qee zaum yuav tsum tau siv cov ntsia hlau hloov dua siab tshiab;
   2. Kev teeb tsa eddy sensor: Muab lub ntsuas ntsuas rau ntawm daim ntawv xeem, lub eddy sensor tsau suite hauv ib ntus;
      
   3. Thaum calibrating, tso lub calibrator ruaj khov li sai tau. Thaum hloov lub sensor, yuav tsum tau tua lub hwj chim mov. Tom qab lub calibration, lub sensor yuav tsum tau muab tshem tawm kom tsis txhob lub sensor nyob rau hauv lub sij hawm ntev ntawm lub rooj.
2. Kev sib txuas Cable
   1. Lub calibrator tuaj yeem ntsuas thiab tso saib tus nqi ntawm cov ntsuas ntsuas cov zis, yog li cov zis ntawm cov sensor xws li hom nqi, IEPE hom thiab Vol.tage hom tuaj yeem txuas nrog lub qhov (socket) ntawm lub teeb liab input qhov (BNC);
   2. Rau qhov tso zis ntawm 4-20 mA sensor, thov txuas lub teeb liab mus rau "4-20 mA" davhlau ya nyob twg, sab hauv calibration ntsuas yog qhia hauv qab no.
      
   3. Rau eddy displacement sensor, lub calibrator tuaj yeem muab lub zog rau qhov ua ntejamplifier; Lub davhlau ya nyob twg ntsuab yog -24VDC, qhov dub yog 0V; Thiab cov zis ntawm preamplifier txuas rau lub teeb liab qhov (socket) ntawm BNC;
   4. Yog tias kev cia siab los ntsuas cov teeb liab tso zis ntawm kev hloov kho sensor, thov xyuas lub qhov (socket) ntawm lub teeb liab tso zis (BNC); Rau qhov teeb liab no tuaj yeem hloov kho tsis siv neeg los ntawm lub calibrator, yog li cov teeb liab tso zis yuav tsum yog ampLified X1 los X10.
   5. Txuas rau AC Fais Fab: Thov paub meej tias AC fais fab mov yuav tsum yog 220 V / 50 Hz;
   6. Yog tias vam tias yuav ua haujlwm los ntawm PC, txuas lub calibrator rau PC los ntawm ib qho USB cable.
3. Cov Chaw Haujlwm Ua Haujlwm
   Tom qab kuaj xyuas cov cables thiab sensors raug kho kom raug, qhib lub zog thiab LCD yuav tso tawm raws li hauv qab no:
   
   1. Hom Sensor tuaj yeem xaiv hom kev ntsuas ntsuas xws li Acceleration, Velocity thiab Displacement. Hom tswv yim: xaiv cov tswv yim ntawm cov ntsuas ntsuas xws li PE (Charge Mode), IEPE Hom, Voltage Hom thiab 4-20mA tso zis hom.
      Kev Teeb Meem: Nias lub pob qhov rooj tuaj yeem hloov pauv los yog
      Ntaus> thiab ntsuas clockwise lossis clockwise lub pob qhov rooj ntawm qhov chaw tam sim no. tuaj yeem hloov cov hom
   2. Kev vibration Freq: Kev vibration zaus hloov
      Txoj kev teeb tsa: Nias lub pob qhov rooj los hloov tus cursor txoj hauj lwm; counterclockwise los yog clockwise kho lub pob qhov rooj, teem lub zaus;
      Kev vibration Amp: Kev vibration Ampkev hloov kho litude
      Txoj kev teeb tsa: Tig lub pob qhov rooj rau lub moos, tuaj yeem txo kev co amplitude; Thiab Tig lub pob qhov rooj clockwise, tuaj yeem ntxiv kev co amplitude. LCD qhia qhov RMS Tus Nqi ntawm kev co amplitude. Thov nco ntsoov cov amplitude tsis tuaj yeem tshaj qhov tso zis ntau tshaj plaws amplitude; Thaum ua tiav, thov teeb tsa amplitude mus rau qhov tsawg kawg nkaus.
   3. Cov zis: cov zis ntawm kev hloov kho sensors, tus nqi yog RMS;
   4. Sens.: Lub rhiab heev ntawm calibrated sensor.

Kev ua haujlwm software

Thov saib daim ntawv qhia tus neeg siv software.

Cov khoom siv

1. Tus neeg siv phau ntawv: 1
2. Daim ntawv pov thawj: 1
3. Input Cables: 4
4. Output Cables: 1
5. Cable fais fab: 1

Cov ntaub ntawv / Cov ntaub ntawv

ROGA Instruments VC-02 Vibration Calibrator [ua pdf] Cov neeg siv phau ntawv qhia VC-02, Vibration Calibrator, VC-02 Vibration Calibrator

Cov ntaub ntawv

• Cov neeg siv phau ntawv