PRO DG GTA 2X10 LA 2 Way Self Powered Line Array System User Manual
Selelekela
Bukana ena e etselitsoe ho thusa basebelisi bohle ba sistimi ea GTA 2X10 LA ea Pro DG Systems hore ba e sebelise ka nepo hammoho le ho utloisisa melemo le maemo a fapaneng a eona. GTA 2X10 LA ke Sistimi ea Line Array e hlophisitsoeng ka botlalo, e entsoe le ho ntlafatsoa Spain, e sebelisa likarolo tsa Europe feela.
Tlhaloso
GTA 2X10 LA ke 2-way-self-powering Line Array system e sebetsang ka holimo e nang le libui tse peli (2) tsa 10” ka har'a kampetsoeng e lokisitsoeng. Karolo ea HF e na le li-drive tsa compression tse peli (2) tsa 1 ” tse kopantsoeng le waveguide. Phetoho ea transducer e hlahisa phallo ea symmetric le e otlolohileng ea 90º ntle le lobes ea bobeli holim'a sekhahla sa maqhubu. Ke tharollo e phethahetseng joalo ka PA e kholo, ho tlatsa ka pele le ho tlatsa ka mahlakoreng liketsahalong tsa kantle kapa ho kenya ka ho sa feleng.
Litlhaloso tsa tekheniki
Ho sebetsana le Matla: 900 W RMS (EIA 426A e tloaelehileng) / 1800 W lenaneo / 3600 W tlhōrō.
Boipuso ka Lebitso: 16 ohm.
Karolelano ea Kutlo: 101 dB / 2.83 V / 1m (karolelano ea 100-18000 Hz wideband).
E Balloang Boholo ba SPL: / 1m 129 dB e tsoelang pele / 132 dB lenaneo / 135 dB tlhoro (yuniti e le 'ngoe) / 132 dB e tsoelang pele / 135 dB lenaneo / 138 dB tlhoro (liyuniti tse' nè).
Marang-rang: +/- 3 dB ho tloha ho 70 Hz ho isa ho 20 KHz.
Nominal Directivity: (-6 dB) 90º sebaka se otlolohileng, tšireletso e otlolohileng e itšetlehile ka longitude kapa tlhophiso ea motho ka mong.
Mokhanni oa Maqhubu a Tlase / Bohareng: Libui tse peli (2) tsa Beyma tsa 10″, 400 W, 16 Ohm.
Sekhahla sa molekane oa Subwoofer: Hammoho le subwoofer tsamaiso ea GTA 118 B, GTA 218 B kapa GTA 221 B: 25 Hz Butterworth 24 filthara - 90 Hz Linkwitz-riley 24 sefa.
Khaollo ea Maqhubu a Mahare: 90 Hz Linkwitz-riley 24 filter - 1100 Hz Linkwitz-riley 24 sefa.
Mokhanni oa Maqhubu a Phahameng: Bakhanni ba babeli (2) Beyma ba 1 ″, 8 Ohm, 50 W, 25mm ho tsoa, (44.4mm) ka coil ea lentsoe Mylar diaphragm.
Khaotso ea Maqhubu a Phahameng: 1100 Hz Linkwitz-riley 24 filter - 20000 Hz Linkwitz-riley 24 filter
E khothalelitsoe Amplifereletsi: Litsamaiso tsa Pro DG GT 1.2 H ka har'a khabinete.
Lihokelo: 2 Lihokelo tsa sebuela-pele sa NL4MP Neutrik.
Acoustic Enclosure: CNC ea mohlala, 15mm e entsoeng ka birch plywood e kentsoeng ka ntle.
Qetella: Tloaelo e tloaelehileng ka pente e ntšo ea ho hanyetsa boemo ba leholimo bo phahameng.
Litekanyo tsa Kabinete: (HxWxD); 291x811x385mm (11,46”x31,93”x15,16”).
Boima ba 'mele: 36,2 Kg (79,81 lbs) letlooa / 37.5 Kg (82,67 lbs) ka liphutheloana.
Litlhaloso tsa meralo
Ka hare ho GTA 2X10 LA
GTA 2X10 LA e bala ka libui tse peli tsa Beyma tsa 10”, 400 W (RMS). E etselitsoe ka ho khetheha tlas'a liparamente tsa rona bakeng sa ts'ebetso e ntle ea sistimi.
LITŠOANTŠI TSE HLOKO
Ho sebetsana le matla a phahameng: 400 W (RMS) 2" khoele ea lentsoe ea terata ea koporo
Kutloelo-bohloko e phahameng: 96 dB (1W / 1m) FEA optimized ceramic magnetic circuit E Entsoe ka theknoloji ea MMSS bakeng sa taolo e phahameng, linearity le khopamiso e tlase ea harmonic Phekolo ea likhoune e sa keneleng metsi mahlakoreng ka bobeli a khoune.
Phallo e laoloang e atolositsoeng: Xmax ± 6 mm Xtshenyo ± 30 mm
Phatlalatso e tlase ea harmonic le karabelo ea mohala Mefuta e mengata e fapaneng ea lits'ebetso tsa maqhubu a tlase le a mahareng a tlase
LIEKETSENG MOKHOPO
Bophara ba lebitso 250 mm (10 in)
E lekantsoe Impedans 16 Ω
Bonyane ba impedance 4 Ω
Matla a matla 400 W (RMS)
Matla a lenaneo 800 W
Kutloelo-bohloko 96 dB 1W / 1m @ ZN
Sebaka sa maqhubu 50 - 5.000 Hz
Recom. Kakaretso vol. 15 / 50 l 0,53 / 1,77 ft3
Boholo ba li-coil tsa lentsoe 50,8 mm (2 in)
Bl ntlha 14,3 N/A
Ho tsamaisa boima 0,039 lik'hilograma
Bolelele ba kela ea lentsoe 15 limilimithara
Bophahamo ba lekhalo la moea 8 limilimithara
Xdamage (tlhōrō ho ea holimo) 30 limilimithara
TS'EBETSO PHAHAMENG
Ka kakaretso bophara 261 mm (10,28 in)
Bolt bophara ba selikalikoe 243,5 mm (9,59 in)
Baffle cutout bophara:
Thaba e ka pele 230 mm (9,06 in)
Botebo 115 mm (4,52 in)
Boima bo kahare 3,5 lik'hilograma (7,71 lb)
* Litekanyetso tsa TS li lekanyetsoa kamora nako ea boikoetliso ho sebelisoa tlhahlobo ea matla ea pele. Litekanyo li etsoa ka transducer ea laser ea lebelo mme e tla bonts'a mekhahlelo ea nako e telele (hang ha sebuelahole se sebelitse nako e khuts'oane).
** Xmax e baloa e le (Lvc-Hag) / 2 + (Hag / 3,5), moo Lvc e leng bolelele ba li-coil tsa lentsoe mme Hag ke bophahamo ba lekhalo la moea.
MAHALA A MOEA IMPEDANCE CURVE
HANGATA KARABO LE KHOPOTSO
Ka hare ho GTA 2X10 LA
GTA 2X10 LA e boetse e entsoe ke lenaka le sa khaotseng la tataiso e etselitsoeng ho sebetsa le li-driver tse peli tsa Pro DG Systems tsa 50 W RMS tse kopantsoeng le waveguide. Litšobotsi tse sa fetoheng tsa moetso ona li netefatsa bokhoni ba ho koahela bophara ba 90º ka bophara le 20º ka bophara ka ho otloloha, hoo e batlang e le khafetsa ka har'a sebaka sa ts'ebetso ea eona. Ho etsa bonnete ba hore ho na le bolokolohi ba ho resonance, lebone lena le entsoe ka aluminium e entsoeng ka tšepe, e nang le ntlha e ka pele e bataletseng ho thusa ho phahamisa mocheso.
LITŠOANTŠI TSE HLOKO
- E etselitsoe ho sebetsa le li-driver tse peli (2) tsa Pro DG Systems tsa 50 W RMS.
- E fana ka karabelo e ts'oanang, ho bulela le ho tima ka mokhoa o sa nke lehlakore le oa tlhaho oa ho ikatisa
- Koahela li-angles tsa 90º sefofaneng se tšekaletseng le 20º sefofaneng se otlolohileng
- Taolo e nepahetseng ea tataiso sehlopheng sa lipasa
- Kaho ea aluminium e entsoeng
LIEKETSENG MOKHOPO
Bophahamo ba 'metso (WxH) 12x208mm (0.47×8.19in)
Beamudth e tshekaletseng 90º (+22º, -46º) (-6 dB, 1.2 – 16 kHz)
Beamidth e otlolohileng 20º (+27º , -15º) (-6 dB, 2 – 16 kHz)
Ntlha ea Directivity (Q) 60 (karolelano ea 1.2 - 16 kHz)
Index ea Directivity (DI) 15.5 dB (+7 dB, -8.1 dB)
Maqhubu a Cutoff 800 Hz
Boholo (WxHxD) 210x260x147mm (8.27×10.2×5.79in)
Cutout dimensions(WxH) 174x247mm (6.85×9.72in)
Boima bo kahare 1.5 lik'hilograma (3.3 lb)
Kaho Aluminium e entsoeng
Ka hare ho GTA 2X10 LA
GTA 2X10 LA e boetse e entsoe ke bakhanni ba babeli ba compression ba Beyma ba 50 W RMS ba kopantsoeng le tataiso ea maqhubu. E etselitsoe ka ho khetheha tlas'a liparamente tsa rona bakeng sa ts'ebetso e ntle ea sistimi. Motsoako oa matla a phahameng a neodymium compression driver a nang le waveguide e fana ka tsela e ntle ka ho fetisisa bakeng sa ts'ebetso e ntle ka ho fetisisa ea GTA 2X10 LA ho rarolla bothata bo boima ba ho fumana khokahanyo e ntle pakeng tsa li-transducers tse phahameng tse haufi. Sebakeng sa ho sebelisa lisebelisoa tse theko e boima le tse thata tsa ho bopa leqhubu, waveguide e bonolo empa e sebetsang e fetola lesoba le chitja la mokhanni oa khatello hore e be bokaholimo ba khutlonnetsepa, ntle le lesoba le sa lokelang ho fana ka kobeho e tlase ho leqhubu la acoustic leqhubu, le fihlang ho phethahatsa tlhoko e hlokahalang ea kotlo bakeng sa motsoako o nepahetseng oa acoustic coupling lipakeng tsa mehloli e haufi le 18KH ho fihlela mehloli e haufi. Sena se finyelloa ka bonyane bolelele bo ka khonehang bakeng sa ho khopama ho fokolang, empa ntle le ho ba nako e khutšoanyane haholo, e ka bakang litšitiso tse matla tsa maqhubu a phahameng.
- 4" x 0.5" ho tsoa ka khutlonnetsepa
- Neodymium magnetic circuit bakeng sa katleho e phahameng
- Khokahano e sebetsang ea acoustical ho fihla ho 18 KHz
- Kutlo ea 'nete ea 105 dB 1w@1m (karolelano ea 1-7 KHz)
- Nako e atolositsoeng ea maqhubu: 0.7 - 20 KHz
- 1.75" coil ea lentsoe e nang le matla a ho tšoara 50 W RMS
Li-Frequency Drivers le Li-Curves tse sothang
Mokokotlo oa mahala oa Air Impedance
KHASANE TS'ELISO
KHASANE THAKA
Lintlha: Phahamiso e lekantsoeng ka li-waveguides tse peli tse kopantsoeng le lenaka la 90º x 5º ka kamoreng ea anechoic, 1w @ 2m. Litekanyo tsohle tsa li-angle li tsoa ho axis (45º e bolela +45º).
LIEKETSENG MOKHOPO
Bophara ba 'metso 20.5 mm (0.8 in)
E lekantsoe impedance 8 ohm
Bonyane ba impedance 5.5 ohms @ 4.5 kHz
DC Khanyetso 5.6 ohm
Matla a matla 50 W RMS ka holimo ho 1.5 kHz
Matla a lenaneo 100 W ka holimo ho 1.5 kHz
Kutloisiso * 105 dB 1w @ 1m hammoho le lenaka la 90º x 5º
Sebaka sa maqhubu 0.7 - 20 kHz
Crossover e khothalelitsoeng 1500 Hz kapa ho feta (12 dB/oct. min.)
Boholo ba li-coil tsa lentsoe 44.4 mm (1.75 in)
Boima ba kopano ea magnetic 0.6 lik'hilograma (1.32 lb)
Boima ba flux 1.8 T
BL ntlha 8 N/A
LIEKETSENG LITŠOANTŠISO
Hlokomela: *Boikutlo bo lekantsoe ka sebaka sa 1m ho axis ka 1w input, ka karolelano ho 1-7 KHz
TS'EBETSO PHAHAMENG
Ka kakaretso bophara 80 mm (3.15 in)
Botebo 195 mm (7.68 in)
Ho phahamisa Likoti tse 'nè tsa bophara ba limilimithara tse 6
Boima ba nete (1 unit) 1.1 lik'hilograma (2.42 lb)
Boima ba thomello (2 diyuniti) 2.6 lik'hilograma (5.72 lb)
LITŠOANTŠISO TSA KAHO
Waveguide Aluminium
Diaphragm ea mokhanni Polyester
Koele ea lentsoe la mokhanni Mohala oa ribone oa Edgewound aluminium
Mokhanni lentsoe coil ea pele Kapton
Mokhanni oa makenete Neodymium
Amptokafatso
GTA 2X10 LA e kenyelletsa amplifier module GT 1.2 H ho tloha Pro DG Systems. GT 1.2 H ke dijithale tsa Sehlopha sa D amplifier module ea moloko oa ho qetela. E kenyelletsa motlakase oa digital o nang le Input ea XLR le Output + USB le Ethernet sehokelo.DSP Software bakeng sa GTA 2X10 LA e fumaneha, e kenyelletsa mesebetsi eohle ea taolo e hlokahalang ho boenjiniere ba morao-rao ba acoustic, ho ba le ts'ebetso e hlakileng le e bonolo ho e sebelisa. Software ea rona e fumaneha bakeng sa mefuta e fapaneng ea Windows, Mac OS X le iOS (iPad). Ikopanye le Ts'ebeletso ea rona ea Tekheniki bakeng sa tlhaiso-leseling e batsi.
LIEKETSENG MOKHOPO
Matla a tsoang ho mocha ka mong: 1 x 1000 W @ 4 Ohm – 1 x 400 W @ 4 Ohm
Outpuit Circuitry: UMAC™ Sehlopha sa D - sehlopha se felletseng se nang le modulator ea PWM e nang le khopamiso e tlase haholo.
Khumo Voltage: 70 Vp / 140 Vpp (e sa laolloa) / Bridged 140 Vp / 280 Vpp (e sa laolloa)
AmpLifier Fumana: 26dB.
Karolelano ea Lerata ho ea ho Lerata: > 119 dB (A-weighted, 20 Hz – 20 kHz, 8 Ω load)
THD+N (e tloaelehileng): <0.05 % (20 Hz – 20 kHz, 8 Ω mojaro, 3 dB ka tlase ho matla a lekantsoeng)
Hangata Karabo: 20 Hz - 20 kHz ± 0.15 dB (moroalo o 8 Ω, 1 dB ka tlase ho matla a lekantsoeng)
DampNtlha: > 900 (moroalo o 8 Ω, 1 kHz le ka tlase)
Lipotoloho tsa Tšireletso: Tšireletso e khutšoanyane ea potoloho, tšireletso ea DC, tlas'a voltage tšireletso, tšireletso ea mocheso, tšireletso ea overload.
Lintlha tse baloang bakeng sa DSP/Network: Sireletsa / Thibela (semumu), mocheso oa Heatsink, Clip (bakeng sa mocha ka mong)
Phepelo ea motlakase: UREC™ universal mains switch mode motlakase o nang le Power Factor Correction (PFC) le converter ea bohlokoa ea standby.
Tshebetso Voltage: Universal Mains, 85-265VAux. Matla a DSP ±15 V (100 mA), +7.5 V (500 mA)
Tšebeliso e Emeng: < 1 W (E lumellana le Green Energy Star)
Litekanyo (HxWxD): 296 x 141 x 105 mm / 11.65 x 5,55 x 4,13 ho
Boima ba 'mele: 1,28 Kg / 2.82 lbs
Ho cheka Hardware.
Magnetic pinlock ke tokiso e ncha ea ts'ireletso e qobang tahlehelo ea eona mme e lumella ho lekana ha bonolo le hardware ea sefofane ka lebaka la thepa ea eona ea makenete.
Rigging Hardware bakeng sa GTA 2X10 LA E entsoe ke: foreimi ea tšepe e bobebe + 4 magnetic pinlocks + shackle ho tšehetsa boima ba boima ba lithane tse 1.5. E lumella ho phahamisa kakaretso ea likarolo tse 16 tsa GTA 2X10 LA
Lisebelisoa tsa sefofane li kenyelelitsoe ka har'a khabinete ka limaraka tse fapaneng tsa angulation.
Mokhoa oa Stack bakeng sa ho feto-fetoha ha maemo le ho fana ka litaba.
BOHLOKOA HAHOLO: tšebeliso e mpe ea foreime le likaroloana e ka ba sepheo sa ho petsoha ho ka senyang polokeho ea sehlopha. Ho sebelisa foreimi e senyehileng le likaroloana ho ka baka mathata a tebileng.
Software ea ho bolela esale pele.
Ho Pro DG Systems rea tseba hore ho etsa libui tsa boleng bo holimo ke karolo ea bohlokoa ea mosebetsi oa rona. Joale, ho fana ka tiisetso ea ho sebelisa libui hantle ke karolo e 'ngoe eo hape e leng ea bohlokoa mosebetsing oa rona. Lisebelisoa tse ntle li etsa phapang bakeng sa tšebeliso e nepahetseng ea sistimi. Ka software ea ho bolela esale pele ea Ease Focus V2 bakeng sa GTA 2X10 LA re ka rala litlhophiso tse fapaneng lipakeng tsa litsamaiso le ho etsisa boitšoaro ba tsona libakeng le maemo a fapaneng joalo ka ho fumana leseli la: khaso, khafetsa, SPL le boits'oaro bo akaretsang ba sistimi ka tsela e bonolo le e bonolo. Ho bonolo ho sebetsana le eona mme re fana ka lithupelo bakeng sa basebelisi ba Pro DG Systems. Ho fumana lintlha tse ling, sheba litšebeletso tsa rona tsa tekheniki ho: sat@prodgsystems.com
Lisebelisoa
Pro DG Systems e fa bareki ba bona mefuta eohle ea lisebelisoa le lisebelisoa bakeng sa litsamaiso tsa bona. GTA 2X10 LA e na le mokotla oa sefofane kapa boto ea li-dolly le likoahelo bakeng sa lipalangoang ho kenyelletsa le cabling e felletseng bakeng sa sistimi e seng e loketse ho sebelisoa.
Sefofane sa sefofane bakeng sa lipalangoang 4 diyuniti GTA 2X10 LA Ka ho feletseng dimensioni bakeng sa pakete hermetic 'me e loketse ho tsamaea.
Boto ea li-Dolly le likoahelo bakeng sa ho tsamaisa likarolo tse 4 tsa GTA 2X10 LA E entsoe ka mokhoa o phethahetseng ho tsamaisa ka mofuta ofe kapa ofe oa teraka.
Complete cabling bakeng sa tsamaiso e teng 'me e loketse ho sebelisoa.
Litokomane / Lisebelisoa
 |
PRO DG GTA 2X10 LA 2 Way Self Powered Line Array System [pdf] Bukana ea Mosebelisi GTA 2X10 LA 2 Way Self Powered Line Array System, GTA 2X10 LA, 2 Way Self Powered Line Array System, Powered Line Array System, Line Array System, Array System |
