PHANTEKS ECLIPSE G500A Tataiso ea ho Kenya Khomphutha

Kea leboha ha u khethile Phanteks. Bukana ena e tla u tataisa ts'ebetsong ea ho kenya mochine oa Eclipse G500A. Haeba u na le lipotso, ka kopo ikopanye le rona ka litšebeletso tsa rona tsa bareki kapa mecha ea litaba ea sechaba.

Bukana ena ke ea mehlala e latelang

PH-EC500GA_DBK01A
PH-EC500GA_DMW01A
PH-EC500GA_BBK01
PH-EC500GA_DBK01B
D-RGB Satin Black
D-RGB Matte White
Tshebetso
D-RGB e se nang Fans
3x 140mm D-RGB Fans Black
3x 140mm D-RGB Fans White
4x 140mm Fans e Ntšo
Ha ho Fans

Phanteks e ke ke ea jara boikarabello bakeng sa ts'enyehelo efe kapa efe e bakiloeng ke ts'ebetso e fosahetseng kapa ts'ebeliso ea sehlahisoa sena.

KEKERETSENG MOTLATSI

TŠEBELETSO EA MOHLASI LE MOSEBETSI

KAPELE KE / O

G500A | D-RGB

G500A | KETSAHALO LE D-RGB E SA FANETSENG

D-RGB MOLAOLI

E sebetsa feela bakeng sa mehlala e latelang

PH-EC500GA_DBK01A & PH-EC500GA_DMW01A

TIMA li-LED

Tobetsa 'me u tšoare konopo ea MODE metsotsoana e 'meli ho tima li-LED, tobetsa hape ho bulela.

HLOKOMELA: Likonopo tsa taolo tsa D-RGB lia tima ha li hokahantsoe le boardboard.

NTLHAKUOA

CPU Cooler Height: 185 limilimithara
Bolelele ba GPU: 435 limilimithara
Phepelo ea motlakase: 250 mm 195mm Haeba ho sebelisoa maemo a 4 a tlase a HDD

Sehlopha sa Pele: 33 mm Ka morao phanele e ka pele
Radiator ea pele ea 360: 95 limilimithara
Radiator ea holimo ea 360: 70 limilimithara
Radiator ea pele ea 420: 142 x 475 limilimithara

MOTHIBANE LESAKANE

Etsa bonnete ba hore u kenya likarete tsohle tsa GPU & PCI esale pele. Beha borakete ea anti-sag ea GPU ka morao. Ho fihlella habonolo, tlosa bracket ea SSD pele.
Kenya li-thumbcrews ntle le ho li tiisa.
Tobetsa li-screw (1) ka bowena, ebe o notlela li-thumbscrews sebakeng (2).

KEKETSO PHEKO

E kenyelelitsoe VERTICAL GPU MOUNT

GEN 4 RISER CABLE E REKISITSOE PH-CBRS4.0_FL22

Chassis ea G500A e ts'ehetsa ho beoa ha GPU e otlolohileng e nang le sehokelo se otlolohileng sa GPU. Thaba ea Vertical GPU e na le maemo a mabeli a holimo, A kapa B joalo ka ha a bonoa mohatong oa 03.

Hokela thapo e phahamang holima GPU e emeng 'me u e sireletse ka li-screw tse 2x tse telele tsa thapo tse phahamang.

Sireletsa Vertical GPU mount ho chassis ka 2x PSU screws.
Boemo A bo ka tšoara likarete tsa GPU tse 3-slot.
Boemo ba B bo ka tšoara likarete tsa GPU tsa 2-slot

GEN 4 VERTICAL GPU BRACKET PH-VGPUKT4.0_03 (GEN 4.0 RISER CABLE E KENYELETSOE)

Joalo ka mokhoa o mong, G500A e ts'ehetsa Phanteks Vertical GPU Bracket e ts'ehetsang ho fihla ho 4 slots GPU. Hape bracket ena e beha GPU hole le phanele ea khalase e halefileng bakeng sa phallo ea moea e eketsehileng.

PELE TS'ELISO

Ho kgothaletswa ho tlosa likarolo tsohle tsa ka ntle pele o qala ts'ebetso ea ho kenya. G500A e tla le liphanele tsa sekoaelo sa polokelo tse ka morao ho lehlakore le letona, li tšehetsa ho fihla ho 6x 2.5 ”SSD haufi le 3x 2.5” SSD tse kentsoeng pele.

LETS'ELISI LEHLAKO

Bula karolo e ka letsohong le letšehali 'me u phahamisetse holimo ho e tlosa.

LEHLAKOANA LEHAKOANA

Bula lehlakore le letona 'me u phahamisetse holimo ho e tlosa.

SEKOAHELO MAPELE

Ho fihlella sebaka sa polokelo, sutumelletsa likhechana ho phanele e 'ngoe le e' ngoe ea sekoaelo ho e lokolla.

PANELE LE LEROLE LESEFA

Tlosa phanele e ka pele ka ho hula phanele ho tloha ka tlase ho uena. Sefefo se ka holimo se ka boela sa ntšoa ka ho se hulela holimo ka morao. Sefahla sa PSU se ka tlosoa ka ho se thellela kantle.

PELE MABAKA

Li-brackets tsa fan tse ka pele li ka sireletsoa sebakeng sa fan sa 120mm ka li-screws tse 6x.
Ka ntle ho lebokose li-brackets li behiloe boemong ba 140mm.

LITLHAKISO HARDWARE

MOTS'EOA

Kenya board ea mama ea ATX u sebelisa 9x motherboard screws. Bakeng sa M-ATX Motherboards latela litaelo tsa motherboard ho tsamaisa li-stand-offs sebakeng se nepahetseng. Sebelisa 'sesebelisoa sa ho tlosa se emeng' ha u sebelisa boardboard e nyane.

PHEPELO EA MOTLAKASE

(01) Tlosa bracket ea PSU pele ka ho lokolla li-screw tsa 2x. (02) Kenya phepelo ea motlakase ka li-screw tsa 4x PSU holim'a bracket. (03) E behe hape ka har'a chassis 'me u tiise li-screw tse 2x tsa monoana o motona.

POLOKO | 2.5" SSD

Tsamaisa Bracket ea SSD holimo ho e tlosa ho chassis.
Sireletsa SSD ka li-screw tsa 4x SSD ho Bracket ea SSD.

Bakeng sa polokelo e eketsehileng, sireletsa SSD ka li-screw tsa 4x SSD ka kotloloho holim'a liphanele.

POLOKO | 3.5" HDD

Tsamaisa HDD ea 3.5” ka har'a lesaka la HDD. Ha u kenya li-brackets tsa 2x 3.5” HDD, li behe pele pele u li kenya ka har'a chassis.

Tsamaisa bracket ea HDD karolong e ka tlase ea chassis, etsa bonnete ba hore ba tobetsa ha e kentsoe ho netefatsa hore e kentsoe ka nepo.

Tlosa sekoaelo sa monoana o motona oa HDD ho tlosa (li)sekoahelo ka har'a chassis.

Kenya bracket ea HDD ho eona, ebe u e tobetsa ho e boloka.
Ho notlela borakete ea HDD, sebelisa 2x Thumb screws ka borakete.

LIKHABANE

Hokela lithapo tsa I/O tse ka pele ho boardboard le phepelo ea motlakase.

LEBOTO KA PELE I/O

LITLHAKU TSE D-RGB

E sebetsa feela bakeng sa mehlala e latelang

PH-EC500GA_DBK01A, PH-EC500GA_DMW01A & PH-EC500GA_DBK01B

Lihlahisoa tse ling tsa mabone tsa D-RGB li ka hokahana le molaoli o kopaneng oa D-RGB. Ka boikhethelo, mabone a ka hokahanngoa le ho laoloa ka software ea motherboard.

AKATSA KA LIHLAHISO TSE DING TSA D-RGB