PCE Instruments PCE-WSAC 50 Airflow Meter Alarm Controller
Rea leboha ka ho reka selaoli sa alamo ea lebelo la moea ho PCE Instruments.
Lintlha tsa polokeho
Ka kopo bala bukana ena ka hloko le ka botlalo pele u sebelisa sesebelisoa ka lekhetlo la pele. Sesebelisoa se ka sebelisoa feela ke basebetsi ba tšoanelehang le ho lokisoa ke basebetsi ba PCE Instruments. Tšenyo kapa likotsi tse bakoang ke ho se latele bukana ha li kenyellelitsoe boikarabellong ba rona mme ha li koaheloe ke waranti ea rona.
- Sesebelisoa se tlameha ho sebelisoa feela joalokaha ho hlalositsoe bukeng ena ea litaelo. Haeba e sebelisoa ka tsela e 'ngoe, sena se ka baka maemo a kotsi ho mosebelisi le tšenyo ea metara.
- Sesebelisoa se ka sebelisoa feela ha maemo a tikoloho (thempereichara, mongobo o lekanyelitsoeng, ...) a le ka har'a mekhahlelo e boletsoeng ho litlhaloso tsa tekheniki. Se ke oa beha sesebelisoa mochesong o feteletseng, mahlaseling a letsatsi, mongobo o feteletseng kapa mongobo.
- Se ke oa pepesetsa sesebelisoa ho makala kapa ho thothomela ho matla.
- Nyeoe e lokela ho buloa feela ke basebetsi ba tšoanelehang ba PCE Instruments.
- Le ka mohla u se ke ua sebelisa sesebelisoa ha matsoho a hau a le metsi.
- Ha oa tlameha ho etsa liphetoho tsa tekheniki ho sesebelisoa.
- Sesebelisoa se lokela ho hloekisoa feela ka papatsoamp lesela. Sebelisa feela pH-neutral cleaner, ha ho na li-abrasives kapa solvents.
- Sesebelisoa se tlameha ho sebelisoa feela le lisebelisoa tse tsoang ho PCE Instruments kapa tse lekanang le tsona.
- Pele o sebelisoa, hlahloba mokotla bakeng sa tšenyo e bonahalang. Haeba ho na le tšenyo e bonahalang, u se ke ua sebelisa sesebelisoa.
- Se ke oa sebelisa sesebelisoa maemong a leholimo a phatlohang.
- Methati ea litekanyo joalo ka ha ho boletsoe ho lintlha ha ea tlameha ho fetisoa tlas'a maemo afe kapa afe.
- Ho se boloke lintlha tsa polokeho ho ka baka tšenyo ho sesebelisoa le likotsi ho mosebelisi.
Ha re nke boikarabello bakeng sa liphoso tsa khatiso kapa liphoso tse ling bukeng ena. Re supa ka ho hlaka lipehelo tsa rona tsa tiisetso tse akaretsang tse ka fumanoang ho latela maemo a rona a akaretsang a khoebo. Haeba u na le lipotso ka kopo ikopanye le PCE Instruments. Lintlha tsa mabitso li ka fumanoa qetellong ea bukana ena.
Matšoao a tšireletso
Litaelo tse amanang le polokeho tseo ho se ketekoe ha tsona ho ka bakang tšenyo ea sesebelisoa kapa kotsi ea motho e na le letšoao la polokeho.
| Letšoao | Boikemisetso / tlhaloso |
 |
Tlhokomediso: sebaka se kotsi Ho se hlokomele ho ka baka tšenyo ho sesebelisoa le likotsi ho mosebelisi. |
 |
Tlhokomeliso: matla a motlakasetage Ho se hlokomele ho ka baka ts'oaetso ea motlakase. |
Litlhaloso
Litlhaloso tsa Tekheniki
- Phepelo ea motlakase: 115 V AC, 230 V AC, 24 V DC
- Phepelo voltage bakeng sa lisensara (sephetho): 24 V DC / 150 MA
- Lekhalo la litekanyo: 0 … 50 m/s
- Qeto: 0.1 m/s
- Ho nepahala: ±0.2 m/s
- Kenyeletso ea lets'oao (e ka khethoang): 4 … 20 mA 0 … 10 V
- Alarm relay: 2 x SPDT, 250 V AC / 10 A AC, 30 V DC / 10 A DC
- Sehokelo (boikhethelo): RS-485
- Thempereichara ea ho sebetsa: 0 ho isa ho 50 °C
- Boholo: N/A
Likahare tsa Phano
- 1 x PCE-WSAC 50 Airflow Meter Alarm Controller
- 1 x Buka ea Mosebelisi
Khoutu ea Odara
Khoutu ea odara ea PCE-WSAC 50 e nang le mefuta e fapaneng tlhophiso:
- PCE-WSAC 50-ABC
- PCE-WSAC 50-A1C: Kutlo ea lebelo la moea 0 … 50 m/s / Output 4 … 20 mA
- PCE-WSAC 50-A2C: Kutlo ea lebelo la moea 0 … 50 m/s / Output 0 … 10 V
ExampLe: PCE-WSAC 50-111
- Phepelo ea motlakase: 230 V AC
- Kenyeletso ea lets'oao: 4… 20 mA
- Puisano: RS-485 segokanyimmediamentsi sa sebolokigolo
Lisebelisoa
PCE-WSAC 50-A1C:
PCE-FST-200-201-I Wind speed sensor 0 … 50 m/s / Output 4…20 mA
PCE-WSAC 50-A2C:
PCE-FST-200-201-U Wind speed sensor 0 … 50 m/s / Output 0…10 V
Tlhaloso ea Tsamaiso
PCE-WSAC 50 Airflow Meter Alarm Controller e na le matšoao a alamo ea LED, pontšo ea tekanyo, konopo ea ho kenya, konopo ea motsu o nepahetseng, phepelo ea motlakase, mohala oa cable, khokahanyo ea relay, khokahano ea sensor ea moea, le RS-485 interface (ho ikhethela).
Tlhaloso ea sesebelisoa
| 1 | Ho bula groove | 8 | Motsu oa holimo |
| 2 | LED "tloaelehileng" | 9 | Hlahisa sekala sa moea (phefo ea matla) |
| 3 | LED "pre-alarm" | 10 | Phepelo ea motlakase ea tšoelesa ea cable |
| 4 | LED "alamo" | 11 | Sensor ea tšoelesa ea cable / moea oa sensor |
| 5 | Bontša boleng bo lekantsoeng | 12 | Sensor ea moea ea khokahano |
| 6 | Kenya senotlolo | 13 | RS-485 segokanyimmediamentsi sa sebolokigolo (boikhethelo) |
| 7 | Senotlolo se ka ho le letona |
Motlakase Wiring
Mosebetsi oa phini bakeng sa ,,Sign Input plug ke joalo ka e latela:
- Tlanya 1: Vcc (Tlhahiso ea phepelo ea matla)
- Tlanya 2: GND
- Tlanya 3: Letshwao
- Tlanya 4: Lefats'e le sireletsang
Mosebetsi oa phini bakeng sa plug ea interface ea RS-485 e tjena:
- Tlanya 1: B
- Tlanya 2: A
- Tlanya 3: GND
Rea qala
Kopano
Hokela selaoli sa alamo ea lebelo la moea moo u batlang. Litekanyo li ka nkoa setšoantšong sa kopano se ka tlase.
Phepelo ea motlakase
Theha phepelo ea motlakase ka likhokahano tse amehang, 'me u hlophise khokahano ea lisebelisoa tse tsamaisanang le sistimi ea hau kapa sesebelisoa sa matšoao (sheba 3.2). Etsa bonnete ba hore polarity le phepelo ea motlakase li nepahetse.
HLOKOMELA: Vol. E feteletsengtage ka senya sesebelisoa! Netefatsa hore zero voltage ha ho theha khokahano!
Sesebelisoa se tla tima hang hang ha se hokahantsoe le phepelo ea motlakase. 'Malo oa hajoale o tla hlahisoa ha sensor e hokahantsoe. Haeba ha ho sensor e kentsoeng, ponts'o e tla bonts'a "00,0" haeba u na le e 'ngoe ea liphetolelo tsa PCE-WSAC 50-A2C (ho kenya letsoho 0…10 V) kapa. "Phoso" haeba u na le mofuta oa PCE-WSAC 50-A1C (Signal input 4…20 mA).
Ho kopanya li-sensor
Kopanya sensor (e sa kenyelletsoeng sephutheloana se tloaelehileng) le sebopeho sa (boikhethelo), u sebelisa li-plug tse hlalositsoeng ho 3.3 le 3.4. Etsa bonnete ba hore polarity le phepelo ea motlakase li nepahetse.
HLOKOMELA: Ho se hlokomele polarity ho ka senya molaoli oa alamo ea lebelo la moea le sensor.
Tshebetso
Tekanyo
Sesebelisoa se lekanya ka ho tsoelang pele ha feela se hokahane le phepelo ea motlakase. Tlhophiso ea kamehla ea fektheri bakeng sa alamo ea pele (S1) e tsoa ho 8 m/s le bakeng sa alamo (S2), boemo ba kamehla bo tsoa ho 10.8 m/s. Alamo ea pele e tla etsa switch ea pre-alarm relay, LED e mosehla e tla khanya 'me molumo oa beep o tla hlahisoa ka linako tse ling. Haeba ho na le alamo, ho tla chencha alamo, LED e khubelu e tla khanya 'me molumo oa beep o sa khaotseng o tla buloa.
N/A
Litlhophiso
PCE-WSAC 50 e na le likhetho tse latelang tsa litlhophiso:
- Etsoa: Tloha ho li-setting tsa menu
- Voralarm: Beha moeli oa pele ho alamo
- Alamo: Beha moeli oa alamo
- Sefe: Beha nako ea filthara kamehla
- Str: Litlhophiso tsa kamehla tsa feme
Ho fihla ho menu ea ho seta, tobetsa konopo ea ENTER (6) ho fihlela nomoro ea pele e benya. Ebe u kenya "888". Ka konopo e ka ho le letona ea Motsu (7), u ka tsamaea ka har'a linomoro ebe u fetola boleng ba nomoro ka konopo ea Arrow up (8). Tiisa ka ENTER (6).
Likhetho tse latelang li ka khethoa ho sebelisoa konopo ea Arrow up (8):
| Pontšo | Tlhaloso | Tlhaloso |
| Keketso | Etsoa | Khutlela ho mokhoa o tloaelehileng oa ho metha |
| S1 | Pele ho alamo | Kenya boleng bo lakatsehang (boholo ba 50 m/s). U ka tsamaisa sesupa ka konopo e nepahetseng ea Motsu (7) ebe u fetola boleng ba linomoro ka konopo ea Arrow up (8). Tiisa ka ENTER (6). Lemoha ka kopo: Theko ea pele ho alamo ha ea lokela ho ba holimo ho boleng ba alamo le boleng ba alamo ha ea lokela ho ba ka tlase ho boleng ba pele ho alamo. |
| S2 | Alamo | Kenya boleng bo lakatsehang (boholo ba 50 m/s). U ka tsamaisa sesupa ka konopo e nepahetseng ea Motsu (7) ebe u fetola boleng ba linomoro ka konopo ea Arrow up (8). Tiisa ka ENTER (6). Lemoha ka kopo: Theko ea pele ho alamo ha ea lokela ho ba holimo ho boleng ba alamo le boleng ba alamo ha ea lokela ho ba ka tlase ho boleng ba pele ho alamo. |
| flt | Sefe | U ka sebelisa konopo e nepahetseng ea Motsu (7) ho tsamaea ka har'a linomoro le konopo ea Arrow up (8) ho fetola boleng ba linomoro. Tiisa ka ENTER (6). Likhetho tse latelang li ka khethoa: "000" Lebelo la moea la hajoale Fetola nako ea ponts'o: 200 ms Fetola nako ea relay: 200 ms "002" karolelano ea boleng ba metsotso e 2 Fetola nako ea pontšo: 120 s Fetola nako ea relay: 120 s " 005“ Boleng ba karolelano ea metsotso e 5 Fetola nako ea pontšo: 300 s Fetola karohano ea relay: 300 s |
| Str | Litlhophiso tsa feme | E seta li-parameter tsohle ho li-setting tsa feme |
Ho kenya lenane le amehang, khetha menu ka konopo ea Arrow up (8) ebe u tiisa ka ENTER (6). O ka tloha ho menu ka ho khetha "Ext" le ho netefatsa ka konopo ea ENTER (6). Haeba ho se senotlolo se tobetsoeng metsotsoana e 60, sesebediswa se kena mokgweng o tlwaelehileng wa ho metha ka bohona.
RS-485 Interface (boikhethelo)
Puisano le molaoli oa alamo ea lebelo la moea PCE-WSAC 50 e lumelloa ke protocol ea MODBUS RTU le boema-kepe ba serial RS-485. Sena se lumella lirejisete tse fapaneng tse nang le lebelo le lekantsoeng la moea, sekala sa moea le lintlha tse ling hore li baloe.
Puisano Protocol
- Rejisetara e ka baloa ka mokhoa oa Modbus function 03 (03 hex) mme e ngoloe ho eona ke ts'ebetso ea 06 (06 hex).
Protocol ea puisano bakeng sa sebopeho sa RS-485 e ts'ehetsa likhahla tse latelang:
- 1200, 2400, 4800, 9600, 14400, 19200, 38400, 56000, 57600, 115200
| Litefiso tsa baud tse tšehetsoeng | 1200, 2400, 4800, 9600, 14400, 19200,38400, 56000, 57600, 115200 |
| Lintlha tsa data | 8 |
| Parity hanyane | Ha ho letho |
| Emisa likotoana | 1 kapa 2 |
| Mofuta oa data oa lirekoto | 16-bit palo e felletseng e sa saenneng |
Boemo bo tloaelehileng
| Sekhahla sa Baud | 9600 |
| Parity | Ha ho letho |
| Emisa hanyane | 1 |
| Aterese | 123 |
Boemo bo tloaelehileng ba sebopeho sa RS-485 ke li-data bits tse 8, ha ho na parity, le 1 kapa 2 stop bits.
E qotsitsoe ho Liaterese tsa Ngoliso
| Ngodisa aterese (December) | Ngolisa aterese (hex) | Tlhaloso | R/W |
| 0000 | 0000 | Lebelo la hona jwale la moya ka m/s | R |
| 0001 | 0001 | Sekala sa moea sa hajoale | R |
| 0034 | 0022 | Pele ho alamo | R/W |
| 0035 | 0023 | Alamo | R/W |
| 0080 | 0050 | Aterese ea Modbus | R/W |
| 0081 | 0051 | Sekhahla sa baud (12 = 1200 baud, 24 = 2400 baud, joalo-joalo) | R/W |
| 0084 | 0054 | Emisa likotoana (1 kapa 2) | R/W |
Ikopanye
Haeba u na le lipotso, litlhahiso kapa mathata a tekheniki, ka kopo u se ke oa qeaqea ho ikopanya le rona. U tla fumana lintlha tse amanang le mabitso qetellong ea bukana ena ea mosebelisi.
Ho lahla
Bakeng sa ho lahloa ha libeteri ho EU, ho sebetsa taelo ea 2006/66/EC ea Paramente ea Europe. Ka lebaka la lintho tse silafatsang tse teng, libeteri ha lia tlameha ho lahloa e le litšila tsa ka tlung. Li tlameha ho fuoa libaka tsa pokello tse etselitsoeng morero oo. E le ho latela taelo ea EU 2012/19/EU re khutlisetsa lisebelisoa tsa rona morao. Re ka li sebelisa hape kapa ra li fa k'hamphani e etsang lintho hape e tsamaisang lisebelisoa ho latela molao. Bakeng sa linaha tse kantle ho EU, libeteri le lisebelisoa li tlameha ho lahloa ho latela melao ea sebaka sa heno ea litšila. Haeba u na le lipotso, ka kopo ikopanye le PCE Instruments.
Lintlha tsa puisano tsa PCE Instruments
Jeremane
- PCE Deutschland GmbH
- Ke Langel 4
- D-59872 Mechede
- Deutschland
- Mohala: +49 (0) 2903 976 99 0
- Fax: +49 (0) 2903 976 99 29 info@pce-instruments.com
- Websebaka: www.pce-instruments.com/deutsch
LBH
- P: Phallo ea matla ke engtage bakeng sa PCE-WSAC 50?
A: PCE-WSAC 50 e ka tsamaisoa ke 115 V AC, 230 V AC, kapa 24 V DC. - P: Na PCE-WSAC 50 e tla le sensor ea lebelo la moea?
A: Che, sensor ea lebelo la moea ha e kenyelelitsoe ka har'a litaba tsa phano. E hloka ho rekoa ka thoko. - Q: ke eng segokanyimmediamentsi sa sebolokigolo kgetho bakeng sa PCE-WSAC 50?
A: PCE-WSAC 50 e na le sebopeho sa boikhethelo sa RS-485 bakeng sa puisano.
Litokomane / Lisebelisoa
 |
PCE Instruments PCE-WSAC 50 Airflow Meter Alarm Controller [pdf] Bukana ea Mosebelisi PCE-WSAC 50 Airflow Meter Alarm Controller, PCE-WSAC 50, Airflow Meter Alarm Controller, Meter Alarm Controller, Alarm Controller, Controller |
