PATCHING PANDA ETNA Triple Multimode Analog Filter
LIEKETSENG
Etna ke filthara e tsoetseng pele ea analog ea multimode morphing, e hlophisitsoeng ka makhethe bakeng sa sebopeho se hlakileng le se matla sa molumo. E lumella phetoho e potlakileng kapa e boreleli lipakeng tsa litlhophiso tse fapaneng tsa filthara, tse tsejoang e le li-snapshots.
Senepe se seng le se seng se hlalosa ka botlalo liparamente tsohle tsa sefa, tse ka fetoloang kapele kapa butle-butle. Liphetoho tsena li laoloa ka matla a sebelisitsoengtage kapa oache le lintho tse susumetsang, tse nang le monyetla oa ho sebelisa ho fihla ho li-s tse robeli tse ikhethilengtages bakeng sa ho theha litlamorao tse rarahaneng tsa ho sefa lits'ebetsong tse fapaneng tsa molumo.
Ntle le bokhoni ba eona ba morphing, Etna e kenyelletsa li-analog control tse nolofalletsang liphetoho tsa nako ea nnete, tse hlakileng ho paramethara ea senepe se seng le se seng se bolokiloeng. Ntlafatso ena ha e ntlafatse ts'ebetso ea morphing feela empa e boetse e fana ka boiphihlelo bo monate, bo hlakileng bo eketsang botebo bo boholo ho tlhahiso ea molumo, e e etsa sesebelisoa se matla bakeng sa li-studio le litlhophiso tsa ts'ebetso e phelang.
KEKETSO
- Hakolla synth ea hau mohloling oa matla.
- Lekola polarity habeli ho tsoa mothapong oa ribone. Ka bomalimabe haeba u senya module ka ho kenya matla ka tsela e fosahetseng e ke ke ea koaheloa ke waranti.
- Ka mor'a ho kopanya cheke ea module hape u kopantse tsela e nepahetseng, mohala o mofubelu o tlameha ho ba ho -12V
A:Sefaele se kenyang molumo 1
B: Filter ea ho kenya molumo 2
C: Filter ea ho kenya molumo 3
D: Kenyelletso ea FM
E: Kenyelletso ea CV Freq 1
F: Kenyelletso ea CV Freq 2
G: Kenyelletso ea CV Freq 3
H: Kenyelletso ea CV Freq ALL
I: Kenyelletso ea CV Q
J: Fetola li-Snapshots tsohle BTN
K: Filter ea molumo oa 1
L: Filter ea molumo oa 2
M: Filter ea molumo oa 3
N: Sefahla sa tlhahiso ea molumo MIX
O: notlela le ho kenya letsoho
P: Seta jeke ea ho kenya bocha
Q: CV Freq 3 snapshot output
R: Bapala Btn
S: Jack ea ho kenya CV Boemo
T: CV Lenght input jack
U: Encoder e potolohang
V: Stagle LED
W: Taolo ea dijithale Freq 1
X: Taolo ea dijithale Freq 2
Y: Taolo ea dijithale Freq 3
Z: Digital control Q bakeng sa bohle
(1) Taolo ea analoge Freq All
(2) Edita, Bolelele, Boemo ba LED
(3) Taolo ea dijithale Ampthuto 1
(4) Taolo ea dijithale Ampthuto 2
(5) Taolo ea dijithale Ampthuto 3
(6) Taolo ea ho glide
(7) Taolo ea analogue Freq 1
(8) Taolo ea analogue Freq 2
(9) Taolo ea analogue Freq 3
(10) Pitsa ea FM ea taolo ea analogue
(11) Analogue attenuverter Freq 1
(12) Analogue attenuverter Freq 2
(13) Analogue attenuverter Freq 3
(14) Filter 1 mode switch
(15) Filter 2 mode switch
(16) Filter 3 mode switch
Sebopeho sa Filter
Etna e na le li-filters tse tharo tsa mefuta e mengata ea analog, ho kenyelletsa le sefe e tlase-pass e nang le moepa oa 24 dB/octave (4-pole), filthara ea "band-pass", le filthara e phahameng e nang le 12 dB/octave (2-pole). ) letsoapo. Li-circuits tsa filthara li fana ka molumo o hloekileng ka ho fetesisa ka lebaka la ho sotha ho tlase ha SSI2164, ho kopantsoe le op- rail-to-rail op-amps ho eketsa moeli ntle le ho sotha maqhubu.
Li-filters tsa Etna li kenyelletsa potoloho ea matšeliso ea Q, ho netefatsa hore ho eketseha ha resonance ha ho etse hore molumo oa tlhahiso o theohe.
Morphing thru snapshots
Senepe se seng le se seng se hlalosa ka botlalo liparamente tsohle tsa sefa, tse ka fetoloang kapele kapa butle-butle.
Setšoantšo se bontša li-control tsa digital
Reng ea LED e bonts'a linepe moo litlhophiso tsa filthara e 'ngoe le e' ngoe li bolokiloeng, li fetoloe, 'me li kenngoe tšebetsong.
Senepeng se seng le se seng, li-parameter tse tla fetoloa hore li bapaloe ke:
Khafetsa ho tsoa ho sefe 1, sefa 2 le sefe 3
Amplitude ho tsoa ho sefa 1, sefa 2 le sefa 3
Resonance ho tsoa lihloeng tsohle
Phetoho ea glide ho tsoa ho li-snapshots
Ho boloka senepe, lokisa selaete sefe kapa sefe. Boleng bo tla ngolisoa ho stage ho fihlela o tsamaisa selaete hape.
Ho tobetsa konopo ea PLAY (LED E TŠEHLA) ho tla hokahanya ho bapala le oache ho latela nako ea s.tages (li-LED tse FUBELU). Ka mokhoa oa STOP, ho potoloha ENCODER kapa ho romela CV ho jack input POSITION ho tla tsamaisa PLAY LED (YELLOW LED).
Ka ho tobetsa EDIT ALL, tokiso efe kapa efe ea fader e tla bontšoa setšoantšong se seng le se seng.
Ka ho tobetsa encoder o ka fetoha ho tsoa mekhoeng e 3 e fapaneng
EDISA: LED e Tala e bonts'a senepe se khethiloeng bakeng sa ho hlophisoa ha oache e ntse e bapala.
BOEMO: Ho potoloha encoder, hammoho le jack ea ho kenya ea POS, ho fokotsa Snapshot 1.
LENGTH: Ho potoloha encoder, hammoho le jack e kenang ea LEN, ho lokisa boholo ba fensetere.
Haeba LED e tala e butse, u ka tsepamisa maikutlo ho stage ha LED e tšehla (PLAY_LED) e ntse e bapala. Haeba mokhoa o motala oa LED o sa khethoa, ho fetola parameter leha e le efe ho tla ama stage bapala ka nako eo.
Etna e ka amahanngoa le oache ea kantle ka ho hokela lets'oao ho jeke ea ho kenya CLOCK. E tla fetela pele ho stage ka molumo o mong le o mong, e u lumellang hore u romele lipaterone tsa trigger ho bapala linepe. Ka ho ts'oara encoder ka metsotsoana e 3, o ka arola sekhahla sa oache ho etsa hore morphing e be butle ka har'a li-snapshots. Ho romela li-trigger ho jack ea ho kenya ea RESET ho tla khutlisetsa PLAY LED ho Snapshot 1.
Oache e ka hare e behiloe ho 120 BPM. Leha ho le joalo, e reretsoe ho sebelisoa le oache ea ka ntle bakeng sa ho hokahanya.
Ha konopo ea EDIT ALL e kentsoe, ho tobetsa konopo ea PLAY ho tla fetola tsela ea ho bapala. Mefuta ea ho bapala e fumanehang ke FORWARD, PENDULUM, le RANDOM.
GLIDE ke nako ea moepa oa mola ka milliseconds, e baloang ho tloha ho boleng bo ngolisitsoeng ba ADC ho isa ho se latelang.tage ADC boleng. Nako ea ho glide e tloha ho 0 ho isa ho 500 ms. Oache e hloka ho lokisoa ho latela nako ea ho fofa. Bakeng sa mohlalaample, haeba ho khethoa glide e phahameng ea metsotsoana e 5, oache e lokela ho hlophisoa ho 3 BPM, 4/4 nako, base 16. Haeba ho khethoa maqhubu a phahameng a oache, ho fofa ho tla sitisoa ke oache.
Motlakase oa FREQ3 o hlahisa lintlha tsa snapshot ho tloha ho FREQ3 slider, e nang le mefuta e mengata ho tloha ho 0V ho ea ho 9V.
Setšoantšo se bonts'a li-control tsa analog le liphetho tsa li-filters.
Litaolo tsena li tla akaretsa boleng ka litokiso tsa dijithale, tse nolofalletsang liphetoho tsa nako ea sebele, tse hlakileng ho paramethara ea senepe se seng le se seng se bolokiloeng. Tšobotsi ena ha e ntlafatse mokhoa oa morphing feela empa e boetse e fana ka tšebelisano e bonahalang, e phelang e kenyang botebo le ho rarahana ho litlhophiso tsa ts'ebetso e phelang.
Li-audio input le Frequency CV li-jacks tsa ho kenya li tlanngoe ka mahlaahlela, 'me karolo e' ngoe le e 'ngoe ea frequency cutoff CV e na le attenuverter e inehetseng.
Kenyelletso ea FREQ ALL, FREQ ALL CV, le kenyelletso ea FM li tla khanna lihloela tsohle tse tharo ka nako e le 'ngoe, ka CV ea tlhahiso ea FM e nang le taolo e inehetseng ea attenuator.
Setlhopha sengwe le sengwe se ka fetolwa magareng ga low-pass (LP), band-pass (BP), le high-pass (HP).
Litšoantšo li bontša 10VPP le 18VPP, tse amanang le liphello tsa motho ka mong.
Ha resonance e eketseha, lets'oao le ka fihla ho 18VPP.
Ka tlhahiso ea MIX, mocha o mong le o mong o fokotsehile ho 8VPP ho fana ka mefuta e mengata ho li-slider tsa AM le ho thibela ho sotha. Haeba resonance e phahame ho tse itseng stagKa hona, li-slider tsa AM li lokela ho lokisoa ho qoba ho sekoa.
Litokomane / Lisebelisoa
 |
PATCHING PANDA ETNA Triple Multimode Analog Filter [pdf] Bukana ea Mosebelisi ETNA Triple Multimode Analog Filter, ETNA, Triple Multimode Analog Filter, Multimode Analog Filter, Analog Filter, Filter |
