ON Semiconductor FUSB302 Type C Interface Detection Solutions Board 

Tataiso ena ea mosebelisi e ts'ehetsa khiti ea tlhahlobo ea FUSB302 E lokela ho sebelisoa hammoho le maqephe a data a FUSB302 hammoho le lintlha tsa kopo tsa ON Semiconductor le sehlopha sa tšehetso sa tekheniki. Ka kopo etela ON Semiconductor's website at www.onsemi.com.

LIEKETSENG

Boto ea tlhahlobo ea FUSB302 (EVB) le software e kenyellelitsoeng e lumella bareki sethala se felletseng ho lekola tharollo ea tlhahlobo ea sebopeho sa Mofuta-C eo FUSB302 e fanang ka eona. EVB e etselitsoe ts'ebetso e ikemetseng le ho hokela lisebelisoa tsa liteko bakeng sa litlhoko tse khethehileng tsa tlhahlobo. Software ea FUSB302 e fana ka taolo ea othomathike ka botlalo le taolo ea matsoho ea mesebetsi ea FUSB302. Ka khokahanyo e le 'ngoe ho PC le litlhophiso tse peli ho GUI, EVB e ka sebetsa e le mohloli, teba kapa koung ea likarolo tse peli.

Tlhaloso

FUSB302 e shebana le baqapi ba sistimi ba batlang ho kenya ts'ebetsong sehokelo sa DRP/DFP/UFP USB Type−C se nang le bokhoni bo fokolang. FUSB302 e fumana mofuta oa USB oa mofuta-C ho kenyelletsa ho hokela, le ho shebana. FUSB302 e kopanya karolo ea 'mele ea protocol ea USB BMC Power Delivery (PD) ho lumella ho fihla ho 100 W ea matla le phapanyetsano ea karolo. Sebaka sa BMC PD se thusa ho tšehetsa ka botlalo likhokahano tse ling tsa mofuta oa mofuta-C.

Likaroloana

• Ts'ebetso ea Dual-Role:
  • Phetoho ea DRP e ikemetseng
  • Bokhoni ba ho hokahanya ka bo eona e le mohloli kapa sekoti ho latela se hoketsoeng
  • Software e ka hlophisoa e le mohloli o inehetseng, sinki e inehetseng, kapa karolo e habeli
  • Lisebelisoa tse inehetseng li ka sebetsa ka bobeli holim'a sepokelo sa Mofuta-C kapa plug ea Type-C e nang le CC e tsitsitseng le kanale ea VCONN.
• Tšehetso ea Mofuta-C 1.3 ka botlalo. E kopanya ts'ebetso e latelang ea phini ea CC:
  • Hokela/tlolla phumano e le mohloli
  • Pontšo ea bokhoni ba hajoale joalo ka mohloli
  • Ho bona bokhoni ba hajoale e le sink
  • Mokhoa oa ho sebelisa adaptara ea molumo
  • Mokhoa oa ho lokisa bothata
  •  Ho fumana thapo e sebetsang
• E kopanya CCx ho VCONN switch e nang le meeli e fetang-ea hajoale bakeng sa ho matlafatsa likhoele tse felletseng tsa USB3.1
• USB PD 3.0 tšehetso
  • Karabelo e iketsang ea pakete ea GoodCRC
  • Ho leka hape ho romella pakete ha GoodCRC e sa amoheloe
  • Pakete e iketsang ea ho seta botjha ha bonolo e rometswe le ho leka hape ha ho hlokahala
  • Automatic hard reset odara set rometsoe
  • Tšehetso bakeng sa melaetsa e atolositsoeng / e fokolang
  • Lenaneomable Power Supply (PPS) tšehetso
  • Mohloli oa mantlha-ho qoba ho thulana
• Sephutheloana sa 9−ball WLCSP (1.215 × 1.260 mm)

MATLA TS'ELISO

FUSB302 EVB e etselitsoe hore e khone ho tsamaisoa ho tsoa ho khokahanyo ea PC kapa ho tsamaisoa ka ntle ho latela litlhoko tsa tlhahlobo.

Matla a Fanoang ho tsoa Botong

FUSB302 e ka sebetsa ka botlalo ho tsoa tlhahisong ea VBUS ea micro-B USB receptacle J2. Ho sebelisa EVB, matla a USB a lokela ho fuoa boto holim'a micro-B USB. Joale, molaoli oa board o hlahisa VDD, e leng 3.3V bakeng sa phepelo ea sesebelisoa. Hang ha motlakase o sebetsang oa USB o fanoe, letšoao la LED, 3.3V, le tla buloa.

2C Puisano

Puisano le FUSB302 e etsoa ka phihlello ea I2C. EVB e lumella mekhoa e fapaneng ea ho hokahanya masters a I2C ho FUSB302.

Khokahano e tobileng ea I2C

Bareki ba batlang ho hokahanya li-master tsa bona tsa I2C ho EVB ba ka hokela matšoao a I2C ho SCL, SDA le INT_N lintlha tsa tlhahlobo.

Khokahano ea PC I2C

EVB e sebelisa PIC32MX250F128 micro−controller e le setsebi sa I2C ho laola FUSB302. Ona ke mokhoa oa puisano o sebelisoang ke FUSB302 GUI. Ka ho hokela PC ho micro-B USB receptacle J2, EVB ka bo eona e fana ka matla ho microcontroller le.

Tlhaloso: FUSB302GEVB

Setšoantšo sa 1. Sebopeho sa EVB

 

e hokahanya master ea I2C le FUSB302. EVB e iketsetsa phepelo e laoloang ea 1.8 V, U6, eo
e sebelisoa ke mofetoleli oa I2C oa kantle ho beha maemo a I2C a sebelisoang le FUSB302.

MOFUTA−C LIKHOKELO TSA TŠEBELETSO

FUSB302 EVB e lumella mekhoa e fapaneng ea ho hokela ho sesebediswa se seng sa Mofuta-C kapa ho laola matshwao a moamohedi wa Type-C ho latela mofuta wa teko e hlokahalang.

Lithapa tsa CC

Lithakhisa tsa Type−C CC1 le CC2 li hokahane ka kotloloho le mokelikeli oa Mofuta-C oa J1 botong. Hape ho na le ntlha ea teko bakeng sa phini e 'ngoe le e' ngoe e ka sebelisoang ho hokahanya likhoele tsa CC ka ntle. Hlokomela hore FUSB302 EVB e na le bonyane bokhoni ba cReceiver bo boletsoeng ho litlhaloso tsa USB PD bakeng sa liphini tsa CC e leng 200pF. Bokhoni bona ke C6 le C7 ho schematic.

V-BUS

VBUS e sebelisoa ka tsela e fapaneng ho latela mofuta oa boema-kepe oa Type−C. Joaloka boema-kepe ba teba, VBUS e hokahane ka kotloloho le mokelikeli oa Mofuta-C oa J1 le sebaka sa tlhahlobo sa VBUS se haufi le J1. Joalo ka boema-kepe ba mohloli, VBUS e ka fetisetsoa setsing sa J1 mme se laoloa ke FUSB302 GUI. Ha e laoloa ke software ea FUSB302, VBUS e fanoa ho tsoa ho khokahanyo ea USB ea PC micro−B. Software ea FUSB302 e sebelisa switch on board load ho laola ho nolofalloa ha VBUS ho moamoheli oa Type−C.

VCONN

VCONN e fanoa ho FUSB302 ho tsoa ho VBUS pin ea khokahanyo ea PC. Ho fana ka VCONN ka ntle, tlosa R6 'me u sebelise VCONN e ka ntle sebakeng sa tlhahlobo sa VCON. Hlokomela hore EVB e na le 10F mabapi le tlhahiso ea VCONN ea FUSB302 e leng bonyane boholo ba bokhoni bo boletsoeng ho tlhaloso ea Mofuta-C. Bokhoni bona ke C4.

USB2.0 le SBU

Li siuoa li butsoe ka har'a sehokelo sa Type−C 'me ha ho lihokelo botong.

Boemo li-LED

Li-LED tsa maemo a latelang li fanoa ho EVB.

Letlapa la 1. LI-LED tsa STATUS

LED	Boemo
D1	VDD e Fanoe ho FUSB302
D2	VCONN e Fanoe ho FUSB302

Setšoantšo sa 2. FUSB302 EVB FM150702B Schematic (1/2)

Setšoantšo sa 3. FUSB302 EVB FM150702B Schematic (2/2)

FUSB302 TLHOKOMELISO EA SEBAKA SA GUI

Ho kenya GUI

Litaelo tsa ho kenya ON Semiconductor FUSB302 Control Software

1. Fumana 'me u ntše faele ea file "fusb302_gui_1_0_0_Customer.exe" (liphetolelo tsa file e tla kenyelletsa nomoro ea tokollo) ho tsoa polokelong file "fusb302_gui_1_0_0_Customer.7z". The .exe e ka fumaneha sebakeng sefe kapa sefe seo u se ratang. Penya .exe habeli file ho theola GUI.
2. Hokela STD−A pheletsong ea thapo ea USB koung ea USB ea komporo ea hau. Hokela STD A pheletsong ea thapo ea USB koung ea USB ea komporo ea hau.
3. Hokela pheletsong ea micro-B ea thapo ea USB ho GUI Interface (J2 ntlheng e ka holimo ea boto) ho EVB (3.3V LED e tla khantša haeba e hokahane hantle).
4. Emela hore Boema-kepe ba USB bo hokahane le molaetsa o karolong e ka tlase ea letsoho le letšehali la GUI e reng "USB Device: VID:0x0779 PID:0x1118". Haeba molaetsa o re "Ho khaotsoe", joale ho na le bothata ba ho hokahanya

Ho ntlafatsa GUI Software:

1.  Tlosa feela mofuta o fetileng oa faele ea .exe.
2.  Pheta mokhoa oa ho kenya ka holimo.

Setšoantšo sa 4. Leqephe la Pele la FUSB302GUI

TŠEBELETSO GUI

Ho qala lenaneo

Ho sebelisa Sethala sa Tlhahlobo sa FUSB302, etsa mehato e latelang:

1. Kenya software ea FUSB302 GUI joalo ka ha ho hlalositsoe karolong e fetileng.
2. Hokela boto ea FUSB302 komporong ea hau ka thapo e nyane ea USB.
3.  Qala software ea GUI ka ho tobetsa .exe file ho tloha sebakeng seo u se bolokileng ho sona.
4.  GUI ea ts'ebetso ea mantlha e tla hlaha joalo ka ha e bonts'itsoe ho Setšoantšo sa 4 ka tlase.
5. Karolo e ka tlase e ka tlase ea skrine e tla bontša "Sesebelisoa se Hokahaneng v4.0.0" (nomoro ea phetolelo e ka 'na ea fapana ha firmware e ncha e lokolloa). Haeba sena se sa bontšoe, ho ka etsahala hore ebe ho na le bothata ba tlhophiso ea matla ka sesebelisoa sa FUSB302. Haeba matla a fanoa ka nepo, hlahloba hore na firmware e hlophisitsoe hantle. Tokomane ea ho jarolla firmware e behiloe ka thoko. Joale o ka bala, oa ngola, 'me oa hlophisa FUSB302. Lisebelisoa li ka hokeloa le ho sebelisoa.

SEBELISA GUI

Ho na le mekhoa e 'meli ea mantlha ea ts'ebetso ho sebelisa FUSB302 GUI:

• Ts'ebetso e ikemetseng e sebelisang khetho ea "Enable USB Type C State Machine" ho "General USB" tab
• Ts'ebetso ea letsoho e thibelang khetho ea "Enable USB Type C State Machine" 'me e hloka ho iketsetsa sesebelisoa ho sebelisa li-tab tsohle Mekhoa ena e' meli ha ea lokela ho sebelisoa hammoho, kaha e tla kena-kenana le mochine oa boemo bo ikemetseng. Boitsebiso ba Boemo ba Mofuta oa C le Boemo ba Phano ea Matla bo bontšoa ho "General USB" tab hammoho le ho "State Logs". Lingoliloeng li ka boela tsa kenngoa ho "Script" tab bakeng sa ho kenya mehato e mengata ea tatellano habonolo. Lintlha tse ling mabapi le ts'ebetso e ikhethileng ea karolo ka 'ngoe ea GUI e fanoe likarolong tse latelang.

Sesebelisoa sa Menu Bar

• “File”
  • Tobetsa "Tsoa" ho tsoa lenaneong la FUSB302 GUI
• "Likhetho"
  • Khetha "Auto Poll" hore GUI e lule e khetha
    FUSB302 bakeng sa ngoliso le lintlafatso tsa log
• "Thusa"
  • "About" e fana ka tlhaiso-leseling ea mofuta oa GUI

Lisebelisoa tsa Taolo ea Lisebelisoa

Li-tab li fana ka taolo e felletseng le tlhokomelo ea FUSB302. Likarolo tse ka tlase li hlalosa mokhoa oa ho sebelisa litsamaiso tsena.

Kakaretso ea USB

Thebo ea "General USB" e sebelisa mechini ea boemo ba mofuta oa C e sebetsang ho lokisa FUSB302 EVB joalo ka Dual−Role Port (DRP), Sink Port, kapa Source Port interface. Ha u qala ho hokela EVB, likhetho tse karolong ea "Boemo ba Taolo" li nchafatsoa ka bo eona. Ho lokisa sesebelisoa boemong boo u bo batlang, khetha "DRP", "Sink", kapa "Mohloli" lebokoseng le theohang la "Port Type", ebe u tobetsa konopo ea "Ngola Config" ho nchafatsa FUSB302.

Setšoantšo sa 5. Kakaretso ea Tabo ea USB

Taolo ea Mochini oa Naha ea Autonomous Type−C e nolofalitsoe le ho koaloa ka ho khetha lebokose la ho hlahloba ebe o tobetsa konopo ea "Ngola Config". Hokela kou efe kapa efe e lakatsehang ea Type−C ho FUSB302, 'me phetoho ea maemo e tla bonoa likarolong tsa Status. Mechini ea boemo ba PD e lumelloa ka ho sa feleng ha mochini oa mofuta oa mofuta-C o buletsoe. O ka nolofalletsa kapa oa tima.
PD ka ho tobetsa konopo e loketseng karolong ea Boemo ba Taolo. Ha mochini oa boemo ba PD o ntse o sebetsa, o tla buisana ka konteraka ea matla ka bo eona ho latela se fumanoeng ho "attach" le tlhophiso ho "Capabilities".

Taolo ea PD

Taba ea "PD Control" e kenya ts'ebetso efe kapa efe ea PD fensetereng ea Nalane ea Molaetsa oa USB PD. The log file e ka atolosoa kapa ea putlama ho bontša lintlha tse ngata kapa tse fokolang tsa lipakete tsa PD. Mabokose a mang a taolo a bonts'a boemo ba hajoale ba mochini oa mmuso oa PD le hore na ho ile ha buisanoa ka konteraka efe. Ha e hokahane e le sink, e bonts'a bokhoni ba mohloli oa mohloli o khomaretsoeng. Mosebelisi a ka khetha bokhoni bo fapaneng mme a etsa likopo. Mosebelisi a ka boela a romela melaetsa e fapaneng ea PD ka ho hula-down menu le ho tobetsa likonopo.

Setšoantšo sa 6. Tabo ea Taolo ea PD

Litsi tsa Naha

Liketsahalo li ka kenngoa ho software ka ho hlahloba khetho ea "Auto Poll" ho menu ea Likhetho. Li-log tsena li ka thusa ho lokisa liphoso le ho lekola nako ea ts'ebetso e fapaneng. Molaetsa o mong le o mong oa log o na le linakoamp (e nang le qeto ea 100s). Ho emisa ho rema lifate, tobetsa khetho ea "Auto Poll" ho menu ea Likhetho. Example ea mofuta oa C-C 'me phallo ea puisano ea PD e bontšitsoe ka tlase.
Ho ts'ehetsa boiteko ba ho lokisa bothata, konopo ea "Set State" e ka sebelisoa ho qobella boemo bo itseng ba mochini oa mmuso. Boemo bo ka khethoa ho menu ea ho hula ka letsohong le letšehali la konopo ea "Set State". Lits'oants'o li ka hlakoloa ka likonopo tsa "Clear State Log" le "Clear PD State Log" ka letsohong le letona la fensetere ka 'ngoe.

Setšoantšo sa 7. Lethathamo la Litaba tsa Naha

Tsebo

Taba ea "Capabilities" ke ho seta-ho theha tšebetso ea PD ea EVB. Litlhophiso tse tabeng ena li bontša hore na mochine oa boemo ba PD o tla arabela joang hang ha khokahanyo e etsoa. Ke mohloli o hlophisitsoeng le bokhoni ba ho teba ba sesebelisoa le algorithm ea ho tjhaja e sebelisetsoang ho ikhethela bokhoni ba mohloli ha o hokahantsoe le mohloli. Hlokomela, likonopo tsa "Read Src Caps", "Read Sink Caps", le "Read Settings" li hloka ho tobetsoa ho bonts'a litlhophiso tsa kamehla tsa mochini oa boemo ba PD.

Setšoantšo sa 8. Tab ea Bokhoni

Ngolisa 'mapa

Taba ea "Register Map" e nolofalletsa ho bala le ho ngola boleng bofe kapa bofe ho ngoliso efe kapa efe ho FUSB302. Ha u ngola rejisetara, rejisetara/lingolisi tse khethiloeng li baloa hape ho netefatsa ketso ea ho ngola. Kahoo konopo ea ho ngola ha e le hantle e ngola 'me e bala mosebetsi oa ho bala.Khetho ea "Poll ea Sesebelisoa" e bolella GUI hore e hlahlobe ka bo eona ngoliso ea DEVICE_ID bakeng sa aterese ea I2C e khethiloeng lebokoseng la "Addr" le ho bonts'a "Sesebelisoa se Hoketsoe ...". kapa molaetsa oa "No Device" k'honeng e ka tlase e letšehali ea GUI.
Khetho ea "Register Poll" e bolella GUI hore e lule e lekola lirekoto tsa FUSB302 le ho ntlafatsa boleng ba ngoliso. Sena se lokela ho sebelisoa feela bakeng sa ho lokisa liphoso kaha se ka sitisa ts'ebetso ea nako ea firmware mme hape se ka hlakola litšitiso tse etsahalang hobane li-registry tse sitisang FUSB302 li "Read to Clear".

Setšoantšo sa 9. Ngolisa Tab ea 'Mapa

Setšoantšo sa 10. Script Tab

Script

Taba ea "Script" e nolofalletsa tšebeliso ea mangolo ho hlophisa FUSB302. Lingoliloeng li ka eketsoa ka GUI ho sebelisa fensetere ea ho hlophisa ka letsohong le letšehali la tab. Fesetere ena ea ho hlophisa e lumella ho kopitsa ho tloaelehileng le ho peista ho kapa ho tsoa mongolong ofe kapa ofe file haeba u batla ho boloka kapa ho kopitsa mangolo a hau ho tsoa kantle files. Mohala o mong le o mong oa script o lokela ho hlophisoa ka tsela e latelang:

Taelo, boema-kepe, I2C adder, # byte, registe eketsa, data1, ..., dataN, maikutlo a boikhethelo

• Taelo ke: "r" kapa "w"
• Boema-kepe bo lula bo le 0
• I2C addr ke 0x44, 0x46, 0x48, kapa 0x4A
• # li-byte ke palo ea li-byte tseo u lokelang ho li bala kapa ho li ngola
• Rejisetara ke aterese ea ho qala
• Lintlha1, ..., dataN ke tsa boleng ba ho ngolla lirekoto
• 'Me maikutlo a boikhethelo ke a tlhahisoleseding Sebaka ka seng se ka aroloa ka sebaka (“ ”), phegelwana (“,”), kapa semikholone (“;”). r 0 0x42 3 0x04 ; bala li-byte tse 3 ho qala ka MEASURE (ngolisa aterese 0x04) An example ea ho ngolla lirejisete tse 2 tse latellanang: w 0 0x42 2 0x0E 0x22 0x55; ngola li-byte tse 2 ho qala ho MASKA (ngolisa aterese 0x0E)

Konopo ea Phethahatso e tla tsamaisa mela eohle ea script. Konopo ea Mohato e tla kenya mohala o totobalitsoeng. Karolo ea Loop e tla hokahanya mongolo kaofela ho fihlela makhetlo a 99. Ho beha palo ea Loop ho 0 ho tla lula ka nako e sa lekanyetsoang. Liphetho tsa script tse phethiloeng li bonts'oa lebokoseng le leqepheng la

lehlakore le letona la tab. Liphetho tsena li ka kopitsoa le ho beoa ho tse ling file.
MohlankanaampLethathamo la tlhahlobo ea loopback ea matla e fanoa ka tlase:

w,0,0×44,1,0x02,0x44; Liphetoho0(PU_EN1, MEAS_CC1)
w,0,0×44,1,0x03,0x01; Liphetoho1(TXCC1)
w,0,0×44,1,0x04,0x31; MDAC
w,0,0×44,1,0x05,0x20; SDAC
w,0,0×44,1,0x0B,0x0F; Lokisa Matla
w,0,0×44,1,0x06,0x10; Control0(Loopback, hlakola int mask)
w,0,0×44,1,0x43,0x12; SOP1
w,0,0×44,1,0x43,0x12; SOP1
w,0,0×44,1,0x43,0x12; SOP1
w,0,0×44,1,0x43,0x13; SOP2
w,0,0×44,1,0x43,0x82; PACKSYM e nang le li-byte tse 2
w,0,0×44,1,0x43,0x01; Boitsebiso1
w,0,0×44,1,0x43,0x02; Boitsebiso2
w,0,0×44,1,0x43,0xFF; Jam CRC
w,0,0×44,1,0x43,0x14; EOP
w,0,0×44,1,0x43,0xFE; TXOFF
w,0,0×44,1,0x43,0xA1; TXON

VDM

Taba ea VDM e tšehetsa Melaetsa e Hlalositsoeng ea Barekisi (VDM). Karolo ea "Configuration" e sebelisetsoa ho hlophisa FUSB302. Fesetere ea karolo e ka holimo ka ho le letšehali ea "FSB302" e sebelisetsoa ho bonts'a le ho fetola kapa ho eketsa tlhahisoleseding ea VDM ho EVB. Ho tobetsa ka ho le letona lebaleng la Sop ho u lumella ho eketsa li-SVID. Ho tobetsa ka ho le letona ho SVID ho u lumella ho tlosa SVID kapa ho eketsa Mokhoa. Ho tobetsa ka ho le letona ho Mode ho u fa monyetla oa ho e tlosa. Ho khutlisa tlhahisoleseling ea VDM ho sesebelisoa se hokahaneng ho ka etsoa ka fensetere ea karolo e ka tlase ea "Tse ling". Ho tobetsa ka ho le letona ho Sop ho u lumella ho kopa Discover Identity kapa Discover SVIDs. Ho tobetsa ka ho le letona ho SVID ho u lumella ho kopa Mekhoa ea Discover. Ho tobetsa ka ho le letona ho Mode ho u fa monyetla oa ho kopa ho Kena kapa ho Tsoa Mokhoa oo.

Setšoantšo sa 11. Taba ea VDM

qala, , le mabitso a mang, matšoao, le lihlahisoa li ngolisitsoe le/kapa matšoao a tloaelehileng a molao a Semiconductor Components Industries, LLC dba “onse” kapa mekhatlo e ikopantseng le/kapa lithuso tsa eona tsa United States le/kapa linaha tse ling. tsohle o na le litokelo tsa palo ea litokelo tsa molao, matšoao a khoebo, litokelo tsa molao, liphiri tsa khoebo, le thepa e 'ngoe ea bohlale. Lethathamo la tsohle's sehlahisoa/patent sekoaelo se ka fihlelleha ho www.onsemi.com/site/pdf/Patent−Marking.pdf. tsohle ke Mohiri oa Monyetla o Tekano/Affirmative Action Employer. Boto ea tlhahlobo/kit (boto ea lipatlisiso le nts'etsopele) (ka mor'a mona "boto") ha se sehlahisoa se felileng ebile ha se fumanehe bakeng sa bareki. Boto e reretsoe feela merero ea lipatlisiso, nts'etsopele, lipontšo le tlhahlobo 'me e tla sebelisoa feela libakeng tsa laboratori / nts'etsopele ke batho ba nang le koetliso ea boenjiniere / botekgeniki le ba tloaelaneng le likotsi tse amanang le ho sebetsana le likarolo tsa motlakase / tsa mochini, litsamaiso le litsamaiso tse nyane. Motho enoa o nka boikarabello bo felletseng / boikarabello ba ho sebetsana ka nepo le ka polokeho. Tšebeliso efe kapa efe e 'ngoe, thekiso kapa kabo bocha bakeng sa morero ofe kapa ofe o thibetsoe ka thata.
BOTO O FUMANA KE ONSEMI HO WENA "JOALOKAHA A LE" MME KA NTLE LE LITEMELETSO KAPA LITIISETSO TSEFELENG. KA NTLE LE HO LEKELA TSE FELELE, ONSEMI (Mmoho le BA-LICENSI/BABAPELI BA EONA) KA ONA E HLAKOLA LITEMELETSO LE TSOHLE LE LITIISETSO MAHALA LE BOTO, LIPHETOHO life kapa life, KAPA TUMELLANO ENA, E KA TSOHLE, HO HLAHALA, HO HLAHISITSOE, HO HLAHISITSOE, HO HLOKAHALA KA TSOHLE. TS'ELISO LE DITIISETSO TSA THEKISO, HO LOKELANG HO FIHLELA MORERO O KHETHEHILENG, SEHLOOHO, HO SE TLOHLO, LE TSE TSOANG HO TSOA MOKHOA OA HO SEBELISANA, TŠEBELETSO EA LIKHOEBO, LITABA TSA KHOEBO KAPA TETELO EA Kgwebo.

ka semi e na le tokelo ea ho etsa liphetoho ntle le tsebiso e 'ngoe ho boto efe kapa efe.

U na le boikarabelo ba ho etsa qeto ea hore na boto e tla ba e loketseng bakeng sa tšebeliso eo u e rerileng kapa kopo kapa e tla finyella liphello tseo u li rerileng. Pele o sebelisa kapa o aba litsamaiso life kapa life tse hlahlobiloeng, tse entsoeng kapa tse lekiloeng ka boto, u lumela ho leka le ho netefatsa moralo oa hau ho netefatsa ts'ebetso ea kopo ea hau. Tlhahisoleseding efe kapa efe ea tekheniki, lits'ebetso kapa boqapi kapa boeletsi, sebopeho sa boleng, data ea ts'epahalo kapa lits'ebeletso tse ling tse fanoang ke semi e ke ke ea ba boemeli kapa waranti efe kapa efe ka semi, 'me ha ho tlamo kapa mekoloto e tla hlaha ho tloha ka mor'a ho fana ka tlhahisoleseling kapa litšebeletso tse joalo. .

ka lihlahisoa tsa semi ho kenyeletsoa liboto ha lia etsoa, ​​​​tsa rereloa, kapa ha lia lumelloa ho sebelisoa lits'ebetsong tsa ts'ehetso ea bophelo, kapa lisebelisoa life kapa life tsa bongaka tsa FDA Class 3 kapa lisebelisoa tsa bongaka tse nang le sehlopha se ts'oanang kapa se lekanang sebakeng sa kantle ho naha, kapa lisebelisoa life kapa life tse reretsoeng ho kenngoa mmele wa motho. O lumela ho qosa, ho sireletsa le ho se be kotsi ho semi, balaoli ba eona, liofisiri, basebetsi, baemeli, baemeli, lithuso, litšebelisano, barekisi, le ho abela, khahlanong le mekoloto efe kapa efe, tahlehelo, litšenyehelo, lits'enyehelo, likahlolo le litšenyehelo tse hlahang. ho tsoa ho tseko efe kapa efe, tlhokahalo, lipatlisiso, nyeoe, ketso ea taolo kapa sesosa sa ketso e hlahang kapa e amanang le ts'ebeliso efe kapa efe e sa lumelloeng, leha tseko e joalo e qosa hore ka semi e bile bohlasoa mabapi le moralo kapa tlhahiso ea lihlahisoa life kapa life le/kapa boto. .

Boto/kite ena ea tlhahlobo ha e oele ka har'a litaelo tsa European Union mabapi le ts'ebelisano ea motlakase, lintho tse thibetsoeng (RoHS), recycling (WEEE), FCC, CE kapa UL, 'me e kanna ea se fihlelle litlhoko tsa tekheniki tsa litaelo tsena kapa tse ling tse amanang. .

TLHOKOMELISO FCC - Letlapa lena la tlhahlobo le reretsoe ho sebelisoa molemong oa nts'etsopele ea boenjineri, lipontšo, kapa tlhahlobo feela 'me ha e nkoe ke onsemi e le sehlahisoa se felileng se loketseng tšebeliso ea bareki ka kakaretso. E ka hlahisa, ea sebelisa, kapa ea khantša matla a maqhubu a seea-le-moea 'me ha e so etsetsoe teko ea ho lumellana le meeli ea lisebelisoa tsa khomphutha ho latela karolo ea 15 ea melao ea FCC, e etselitsoeng ho fana ka tšireletso e utloahalang khahlano le tšitiso ea maqhubu a radio. Ts'ebetso ea sesebelisoa sena e ka baka tšitiso ea likhokahano tsa seea-le-moea, moo mosebelisi a tla ikarabella, ka litšenyehelo tsa eona, ho nka mehato efe kapa efe e hlokahalang ho lokisa tšitiso ena.

tsohle ha e fane ka laesense efe kapa efe tlasa litokelo tsa eona tsa patent kapa litokelo tsa ba bang.

MEKHAO EA MOLAMO: onsemi e ke ke ea ikarabella bakeng sa tšenyo efe kapa efe e khethehileng, e bakoang, e sa lebelloang, e sa tobang kapa ea kotlo, ho kenyeletsoa, ​​​​empa e sa felle feela ho litšenyehelo tsa ho tšoaneleha, ho lieha, tahlehelo ea phaello kapa kamohelo, e hlahang kapa e amanang le boto, le haeba e eletsoa ka monyetla oa tšenyo e joalo. Leha ho le joalo, ha ho na ketsahalo e tla tlameha ho feta tefiso e lefshoang bakeng sa boto, haeba e le teng.

Boto e fanoa ho uena ho latela laesense le lipehelo tse ling ho latela lipehelo le lipehelo tse tloaelehileng tsa thekiso. Ho fumana lintlha tse ling le litokomane, ka kopo etela www.onsemi.com.

PHATLALATSO LA TAORO TSEBISO

PHETHAHATSO EA LIBONGOLI:
Likopo tsa lengolo-tsoibila ho: orderlit@onsemi.com
tsohle Websebaka: www.onsemi.com
TŠEHETSO EA TEKHENIKI Tšehetso ea Theknoloji ea Amerika Leboea:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Mohala: 011 421 33 790 2910

Europe, Bohareng Tšehetso ea Theknoloji ea Bochabela le Afrika:
Mohala: 00421 33 790 2910 Ho fumana lintlha tse ling, ka kopo ikopanye le Moemeli oa Thekiso ea sebakeng sa heno.

E jarollotsoe ho tsoa

Arrow.com.

Litokomane / Lisebelisoa

ON Semiconductor FUSB302 Type C Interface Detection Solutions Board [pdf] Bukana ea Mosebelisi FUSB302GEVB, FUSB302 Type C Interface Detection Tharollo Board, FUSB302, Type C Interface Detection Solutions Board, Type C Evaluation Board, Lekhotla la Tekolo ea Tharollo ea Interface Detection, Boto ea Tlhahlobo.

Litšupiso

• Bukana ea Mosebelisi