TŠEBELETSO
TS'OANELO TS'OANELO
KEKETSOE
1275 Danner Dr
Aurora, OH 44202
Te1:330-562-7070
Fax:330-562-1999
www.networktechnc.com
Letoto la ENVIROMUX®
Buka ea ho Kenya Sensor ea Mocheso / Mongobo
ENVIROMUX Series Environmental Monitoring System Remote Network Sensor Alarm
LIEKETSENG
Li-sensor tse ngata tse fapaneng li ka hokahanngoa le ENVIROMUX Series Enterprise Environment Monitoring Systems. Letoto la mefuta e koahetsoeng ke bukana ena e kenyelletsa ENVIROMUX-SEMS-16U le E-16D/5D/2D. Lethathamo le felletseng la li-sensor tse fumanehang le lisebelisoa li ka fumanoa ho
http://www.networktechinc.com/enviro-rems.html bakeng sa ENVIROMUX-SEMS-16U,
http://www.networktechinc.com/environment-monitor-16d.html bakeng sa E-16D,
http://www.networktechinc.com/environment-monitor-5d.html bakeng sa E-5D,
http://www.networktechinc.com/environment-monitor-2d.html bakeng sa E-2D, le Litaelo tsa Sistimi e 'ngoe le e 'ngoe ea Tlhokomelo ea Tikoloho e koahelang ho kenya le ho hlophisoa ha likarolo tsohle le tsona li ka fumanoa ho tsena. weblibaka.
Buka ena e fanoa feela ho laela mokhoa oa ho kenya lisebelisoa tsa mocheso le mongobo oa ENVIROMUX ho mekhoa ena.
KHABANE
Boholo ba li-sensor tsa ENVIROMUX Temperature le Humidity li etselitsoe tšebeliso ea ka tlung feela.
Kenya sebaka leha e le sefe empa u kenyeletse le lesoba la senotlolo ka morao ho thusa ho kenya lebota ka potlako ha ho hlokahala.
Li-sensor tsena li ka kenngoa
Setšoantšo sa 1- Sekotjana sa Keyhole bakeng sa ho kenngoa ho tloaelehileng
Hlokomela: Ha o kenya ESTHS-LSH Low Self-Heating Temperature\ Humidity Sensor, ho molemo ho beha sensor ka ho otloloha 'me mosi oa fan o shebile holimo ho thusa ho thibela lerole ho tsoa.
Haeba u rekile ENVIROMUX Sensor e nang le sekotwana sa seporo sa DIN bakeng sa ho kenya seporo sa DIN, bona setšoantšo (leqephe la 2) bakeng sa litaelo tsa ho kenya sensor ho seporo sa DIN.
NTI ENVIROMUX TEMPERATURE/HUMIDITY SENSOR ATTACHMENT
- Beha DIN Rail Clip hantle ho DIN Rail hoo litsebe tsa sekotwana li lutseng ka holim'a Seporo sa DIN.
- Tobetsa fatše ka tieo le ka mokhoa o lekanang ho ENVIROMUX ha u ntse u potoloha khetsi ho hula sekotwana tlas'a moeli o ka tlase oa DIN Rail.
- Yuniti ea ho lokolla. Litsebe tsa clip li tla pota-pota mathōko a seporo, li tšoere yuniti sebakeng se sireletsehileng. Ho tlosa yuniti, khutlisetsa tšebetso morao.
E-STHS-LCDW
E-STHS-LCDW ke sensor ea Mocheso le Mongobo e hahiloeng ka har'a ponts'o e kholo ea lebota ea LCD e nang le bolelele ba litlhaku tse 2" hore e be bonolo. viewho lla hole. Ho na le likoti tse peli tsa linotlolo ka morao, 4-1 / 2 "ka thoko, bakeng sa ho fanyeha sensor leboteng. Ho fanoe ka template ho etsa hore ho behoa le sebaka sa hardware se be bonolo. Hape ho na le li-brackets tse peli (tse nang le li-screw) tse ka kenngoa ka mahlakoreng. Tsena li fanoa bakeng sa mokhoa o mong oa ho homa.
Peleview ea E-STHS-LCDW (E bonts'itsoe ntle le masaka a ka lehlakoreng)
Ka moraoview ea E-STHS-LCDW
Mounting Taelo
Ho Sebelisa Masakana a Mahlakoreng
- Beha bracket e lehlakoreng le leng lehlakoreng le leng le le leng la sensara ka li-screws tse fanoeng.
- Sensor ea boemo 'me u tšoaee holim'a likoti tsa linotlolo.
- Cheka masoba a mabeli a bophara ba 3/16 ” moo bokaholimo ba masoba a linotlolo bo tšoailoeng.
- Kenya li-ankora tsa lebota (ho fanoe) 'me u qale li-screws tse ntseng li eketseha.
- Kenya sensor holim'a li-screw 'me u theole li-screw.
Ho Sebelisa Rear Keyhole Slots
- Beha template sebakeng se hloahloa 'me u tšoaee holim'a masoba a linotlolo.
- Cheka masoba a mabeli a bophara ba 3/16 ” moo bokaholimo ba masoba a linotlolo bo tšoailoeng.
- Kenya li-ankora tsa lebota (ho fanoe) 'me u qale li-screws tse ntseng li eketseha.
- Kena ho fihlela hlooho ea screw e batla e le 1/8-3/16" ” ho tloha leboteng.
- Kenya sensor holim'a li-screw.
KHOKANG MATSOSO
Li-sensor tsa RJ45
Lisebelisoa tsa mocheso le mongobo bakeng sa E-16D/5D/2D le E-SEMS-16(U) Enterprise Environment Monitoring Systems li na le likou tsa khokahanyo tsa RJ45. Kopanya sensor e 'ngoe le e' ngoe ho e 'ngoe ea li-connectors tsa basali tse ngotsoeng "RJ45 Sensors" ho ENVIROMUX u sebelisa cable ea CAT5. Lihokelo tsa banna tsa RJ45 li lokela ho kenella sebakeng. (Sheba leqephe la 12 bakeng sa litlhaloso tsa wiring le pinout.) Cable ea CAT5 e kopanyang sensor ho ENVIROMUX e ka ba bolelele ba limithara tse 1000 (ntle le E-STHS-LCDW, e lekanyelitsoeng ho maoto a 150).
Hlokomela: Ho bohlokoa haholo ho fumana lisensara tsa mocheso le/kapa tsa mongobo hole le mehloli ea moea le lifenehi.
Hlokomela: Cable e sirelelitsoeng ea CAT5 e hlokahala pakeng tsa sensor le ENVIROMUX ho boloka ho latela melao ea CE ea sensor.
Tlhokomeliso ea Kopo:
Ha o hokahanya li-sensor tsa mocheso le mongobo ho ENVIROMUX, the web interface e tla khetholla sensor ho latela mofuta oa sensor eo e leng eona. Sebaka sa boemo le leqephe la tlhophiso li tla kenya boholo bo boholo le bo fokolang boo mofuta ona oa sensor o ka bo bonts'ang haeba o sebelisoa le ENVIROMUX, eseng hakaalo sebaka sa ts'ebetso ea sensor ka boeona. Mefuta e fapaneng ea sensor ea mocheso le mongobo e fanoang ke NTI e na le mefuta e fapaneng ea bokhoni ba ts'ebetso, joalo ka ha ho bonts'itsoe lethathamong le leqepheng la 14. Etsa bonnete ba hore o bapisa sensor e kentsoeng le sebaka sa ts'ebetso sa tikoloho eo ho tla lebelloa hore e sebetse ho eona. sensor ka ntle ho mocheso oa mocheso o reretsoeng ho ka baka tšenyo ho sensor.
E-xD firmware version 2.31 kapa hamorao ea hlokahala ho tšehetsa sensor ena.
E-STHS-LCDW
E-STHS-LCDW ke sensor ea mocheso / mongobo e nang le ponts'o ea LCD e hahelletsoeng e nang le litlhaku tse 2" tse telele bakeng sa bonolo. viewho tloha bohole bohole. . E na le mocheso o fapaneng oa -4 ho 140 ° F (-20 ho 60 ° C) ± 0.7 ° F (± 0.4 ° C) 'me e tla utloa 0 ho 90% mongobo o amanang le ± 4% RH (30 ° C). E kenyelletsa likonopo tse peli tse sa utloeng bohloko. E 'ngoe e laola khanya ea LCD,' me e 'ngoe ke ho potoloha mokhoa oa pontšo pakeng tsa mocheso ka likhato tsa Fahrenheit, mocheso ka likhato tsa Celsius, le percentage ea mongobo.
E-STHS-LCDW e kenyelletsa li-slots ka morao bakeng sa lisebelisoa tse patiloeng tse patiloeng le li-brackets tse peli bakeng sa mefuta e meng e ntseng e eketseha ho tloha mahlakoreng.
Ho sebelisa konopo ea MODE, thetsa 'me u lokolle ho potoloha ponts'o ho tloha ho Degrees F. ho ea ho Degrees C, le ho percencetage of Humidity, le hang hape ho khutlela ho Degrees F. Pontšo e tla tšoara mokhoa o behiloeng, nako le nako, ho fihlela MODE e tongoa hape.
Ho sebelisa konopo ea LIGHT, tobetsa ho bonesa skrineng bakeng sa metsotsoana e 5.
Ho boloka ponts'o e bonesitsoe, ama 'me u tšoare
Konopo ea LIGHT bonyane metsotsoana e 6.
Thetsa 'me u lokolle hape ho emisa ho bonesa kamora metsotsoana e meng e 5.
Ho phahamisa sensor, sebelisa lisebelisoa tse fanoeng ho sireletsa sensor leboteng (sheba leqephe la 2-3).
Ha e se e kentsoe, hokela thapo ea CATx lipakeng tsa sehokelo sa RJ45 le sistimi ea ho shebella ea ENVIROMUX.
Mohala o tsoang ho ENVIROMUX o tla hokela sensor boema-kepeng ba RJ45 botlaaseng ba E-STHS-LCDW. E-STHS-LCDW e tla tsamaisoa ke ENVIROMUX Monitoring System ka mohala oa CATx. Re khothaletsa ho sebelisa thapo ea CAT5/5e/6/6a (bonyane 24 AWG) ho fihla ho 150 ft (45.7 m) bolelele.|
Hlokomela: Haeba ho sebelisoa thapo e telele (ho fihla ho 1000ft), konopo ea MODE e ke ke ea sebetsa ha pontšo e bonesitsoe ka ho tobetsa konopo ea LIGHT.
Pontšo e 'ngoe (E-xD firmware version 3.0 kapa hamorao ea hlokahala)
E-STHS-LCDW e ka hlophisoa ho bonts'a ho baloa ha sensor ho tsoa ho li-sensor tse ling tsa RJ45 kapa ho Sensor ea Digital e nang le tlhahiso ea lipalo (joalo ka Winnds Speed sensor (E-WSS), Barometric Pressure Transmitter (E-BPT) kapa Ultrasonic Level Transmitter (E-ULT).
Ha E-STHS-LCDW e hokahane, menu ea tlhophiso ea sensor e kenyelletsa sebaka sa "Display Option". Ka har'a menu e theoha (sheba setšoantšo se leqepheng le latelang), li-sensor tsohle tse tšoanelehang ho ba le data e bonts'itsoeng ho LED li tla fumaneha bakeng sa khetho. Ke pontšo ea LCD feela e tla etsoa. Litlhophiso tse setseng li ntse li tla amana le karolo ea E-STHS ea E-STHS-LCDW.
E-PLSD
E-PLSD ke ponts'o ea Sensor ea LED e nang le litlhaku tse 2 ″ tse telele ho bonts'a boleng ba sensor le litlhaku tse 0.68 ″ ho bonts'a hore na ho hlahisoa data efe le tekanyo ea tekanyo. E kenyelletsa likonopo tse tharo tse sa utloeng letho.
- "Khanya" ho laola khanya ea pontšo ea LED (ho thella ka monoana oa hau ho tloha ho le letšehali ho ea ho le letona)
- "Sensor" ho khetha data ea sensor e tla hlahisoa
- "Mokhoa" ho potoloha mokhoa oa ponts'o lipakeng tsa thempereichara ka likhato tsa Fahrenheit le mocheso oa likhato tsa Celsius.
Litlhaku tse bonts'itsoeng tsa LED li tla ba Botala ha boemo ba sensor bo tloaelehile, bo mosehla ha sensor e le tlhokomeliso e seng ea bohlokoa, 'me e khubelu ha e le maemong a bohlokoa a tlhokomeliso.
E-PLSD e kenyelletsa li-flange tse ntseng li hola tse nang le li-slots bakeng sa ho hloella sebakeng seo u se batlang.
Hlokomela: E-PLSD e tšehetsa litlhaku tsa Senyesemane feela.
Ho boetse ho na le linotlolo tse peli tsa linotlolo ka morao ho mokotla haeba u ka rata ho li sebelisa bakeng sa ho hola.
Ho na le likou tse tharo tsa khokahano ka tlase ho E-PLSD. E 'ngoe bakeng sa khokahanyo ea matla, e' ngoe bakeng sa khokahano ea cable ea CATx ho boema-kepe ba E-xD RJ45 Sensor (ho fihlela bolelele ba limithara tse 1000 ho sebelisoa thapo ea 24AWG), 'me ea boraro bakeng sa Mocheso o eketsehileng oa E-TRHM-E7, Mongobo le Dewpoint sensor (ho ikhethela) e tla amoheloa ke E-xD hang ha e hokahantsoe. Ke mofuta ona oa sensor feela o ka hokahanngoang. E-TRHM-E7 e ka atolosoa ho tloha ho E-PLSD ho fihlela maotong a 500 ho sebelisa cable ea 24AWG.
Hlokomela: Pontšo ea LED e ke ke ea BUA ntle le haeba 1) matla a hokahane ho eona le 2) thapo ea CATx e hokahane pakeng tsa E-PLSD le E-xD.
E-PLSD e na le litlhophiso tse ka hlophisoang ho tsoa ho E-xD web interface (firmware version 4.7 kapa hamorao). Lethathamong la Tlhokomelo, khetha Lipontšo tsa LED, ebe o tobetsa Edit (kapa Tlosa haeba u batla ho e tlosa lethathamong la hau). Ho fihla ho 10 E-PLSD e ka hokela ho E-16D, E-5D kapa E-2D. (E-RJ8-RS485 RJ45 RS485 Sensor Port Hub (e rekisoang ka thoko) e ka sebelisoa.)
Lintlha tse tsoang ho li-sensor tsohle tse hokahantsoeng le E-xD li ka khethoa hore li bontšoe ke E-PLSD.
Tlhaloso e ka fetoloa ho eng kapa eng eo u e ratang. Ena e tla ba Tlhaloso ea E-PLSD joalo ka ha e bonts'itsoe lethathamong la tlhahlobo ea E-xD.
Nako ea ho Scroll Character e ka hlophisoa lipakeng tsa 200 le 1000 milliseconds (0.2 ho isa ho 1 motsotsoana). Ena ke nako eo e tla e nka ho bonts'a sebapali se latelang ha u ntse u bala lebitso la sensor. (Sena ke sa li-sensor tse nang le litlhaku tse fetang 14 lebitsong la tsona. Haeba sensor e na le lebitso le nang le litlhaku tse 14 kapa ka tlase ho bolelele, E-PLSD e tla bonts'a lebitso feela mme ha e hloke ho e tsamaisa.)
Lebitso le lekhutšoanyane (lebitso la bosoasoi) le ka abeloa viewe bonts'a feela skrineng sa LED se bolelele ba litlhaku tse 14. Sena se ka hlophisoa 'me sa khethoa ho sebopeho sa sensor (sheba Setšoantšo sa 13).
Haeba u khetha "Scan sensors in Alert", ho tla hlaha li-sensor tse tsoang Lethathamong la Hona Joale tse leng tlhokomeliso (litlhaku tse mosehla kapa tse khubelu). Haeba ho se na li-sensor tse falimehileng, li-sensor tsohle li tla hlahlojoa (litlhaku tse tala).
Seta bocha Nako ea ho Hlakola e beha bolelele ba nako eo sensor ka 'ngoe e tla hlaha skrineng. Sebaka se amohelehang ke metsotsoana e 5 ho isa ho 1000. Linomoro tse kentsoeng tse ka tlase ho 5 li tla fetoleloa ho 5, 'me lipalo tse fetang 1000 li tla fetoleloa ho 1000.
Kamora ho khetha boleng, tlanya "Seta Nako ea Scan" 'me li-sensor tsohle tse ho "Sensor Scan List li tla fetola boleng ba nako ea tsona hore e be palo eo.
Tobetsa Clear All ho tlosa li-sensor tsohle Lethathamong la Sensor Scan.
Tobetsa Eketsa Tsohle ho kenyelletsa li-sensor tsohle tse fumanehang Lethathamong la Sensor Scan.
Ho tlosa kutlo ea motho ka mong lethathamong, kapa ho kenyelletsa kutlo ea motho ka mong lethathamong, hula feela le ho theola sensor ho tloha lethathamong le leng ho ea ho le leng. Lintlha tsa nako ea ho skena li ka abeloa hang ha sensor e le Lethathamong la Sensor Scan.
Haeba u batla ho fetola tatellano eo li hlahlojoang ka eona, hula feela li-sensor holimo kapa tlase ho ea maemong a fapaneng lethathamong.
Ho sa tsotellehe liphetoho tseo u li etsang leqepheng lena, etsa bonnete ba hore u tobetsa konopo ea "Boloka" ha u qetile ho etsa hore liphetoho li sebetse ho E-PLSD. Ha "Save" e tobetse, E-PLSD e tla qala ka bo eona ho skena ho tloha kaholimo ho lenane la hajoale la scan.
Sensor konopo
Haeba konopo ea Sensor e hatelloa, ponts'o e tla fetela ho sensor e latelang lethathamong ebe e bonts'a ho bala ha sensor ka metsotsoana e 30 pele e tsoela pele ho skena. Leha ho le joalo, haeba nako ea ho hlahloba kutlo (sheba Setšoantšo sa 12) e le kholo ho feta metsotsoana e 30 sebaka sa pontšo bakeng sa nako e hlophisitsoeng ea scan pele e tsoela pele ho hlahloba.
E-STS-O/-IP67 Ts'ebetso ea Kopano ea Sensor ea Kantle ea Mocheso oa Sensor
- Kenya reng ea tiiso ka har'a ntlo.
- Hlobola baki ea cable e sirelelitsoeng ea CATx (6mm-7mm OD) hoo e ka bang ½” 'me u kenye thapo ka har'a nate e koalang, screw nut le ntlo. (Hlokomela: Mocheso o fokotsang mocheso o ka sebelisoa ho thapo ho eketsa OD ea thapo ea CATx ho 6mm-7mm.)
- Tlosa thapo e sirelelitsoeng ea CATx ka sehokelo sa RJ45.
- Beha sehokelo sa RJ45 ka har'a ntlo e le hore sehokelo sa snap se be boemong ba notch.
- Etsa bonnete ba hore reng ea tiiso e lutse ka ho feletseng ka tlung.
MOHATO ENA O BOHLOKOA HAHOLO HO SEBELISA TIISO E SA FUMANENG METSI!
- Hokela kopano ka har'a sokete ho E-STS-O 'me u boloke screw nut. Ebe u sebelisa nate ea ho tiisa 'me u tiise ka mokhoa o sireletsehileng.
Ho phahamisa
Ho kenya E-STS-O, ho fanoe ka li-brackets tse peli tseo e 'ngoe le e' ngoe e sirelelitsoeng ka screw (e fanoeng).
Kenya bracket e 'ngoe le e' ngoe e nang le moqomo o phahamisitsoeng ho ea ka pele ho sensor, e le hore bracket e lule e bataletse 'me e lekana hantle khahlanong le kesi ea sensor.
U se ke ua fetelletsa li-screws kapa ho tlosoa ha mokotla ho tla etsahala.
E-STS-IP67 e kenyelletsa libakete tse peli tsa tšepe sebakeng sa polasetiki, empa li hokela likoti tse 4 tse ka morao ho nyeoe. Joalo ka E-STS-O, e-ba hlokolosi hore u se ke ua tiisa li-screws tse fanoeng kapa ho tlosoa ha nyeoe ho tla etsahala.
LINTLHA TSA MOCHESO LE MONGOO
| MOHLALA MOHLALA | SEBELISA MOCHESO MOCHESO | BOIKOKOBETSO LEHATA | PHOMOLO | |
| E-STS | 32 ho isa ho 122°F (0 ho isa ho 50°C) | n/a | ± 0.9 ° F (± 0.5 ° C) | |
| E-STS-O / E-STS-IP67 | -40°F ho ya ho 185°F (-40°C ho ya +85°C) | n/a | ± 0.9 ° F (± 0.5 ° C) | |
| E-STSM-E7 | -4 ho isa ho 140°F (-20 ho isa ho 60°C) | n/a | ±1.26°F (±0.70°C) bakeng sa -4 ho 41°F (-20 ho 5°C) ±0.72°F (±0.40°C) bakeng sa 41 ho isa ho 140°F (5 ho isa ho 60°C) | |
| E-STHS-LSH | -4 ho isa ho 140°F (-20 ho isa ho 60°C) | 0 ho isa ho 90% RH | ±1.44°F (±0.80°C) bakeng sa -4 ho isa ho 41°F (-20 ho isa ho 5°C) ±0.72°F (±0.40°C) bakeng sa 41 ho isa ho 140°F (5 ho isa ho 60°C) Inflation ka lebaka la ho iphuthumatsa <0.9°F (0.5°C) e tlwaelehileng, 2.3°F (1.3°C) max. 0 ho 20% RH, ± 4% 20 ho 80% RH, ± 3%
80 ho isa ho 90% RH, ± 4% |
|
| E-STHSB | -4 ho isa ho 185°F (-20 ho isa ho 85°C) | 0 ho isa ho 90% RH | ±1.44°F (±0.80°C) bakeng sa -4 ho isa ho 41°F (-20 ho isa ho 5°C) ±0.72°F (±0.40°C) bakeng sa 41 ho isa ho 140°F (5 ho isa ho 60°C) ±1.62°F (±0.90°C) bakeng sa 140 ho isa ho 185°F (60 ho isa ho 85°C) 0 ho isa ho 20% RH, ±4% 20 ho isa ho 80% RH, ±3% 80 ho isa ho 90%RH, ±4% (ka 77°F/25°C) | |
| E-STHSM-E7 | -4 ho isa ho 140°F (-20 ho isa ho 60°C) | 0 ho isa ho 90% RH | ±1.44°F (±0.80°C) bakeng sa -4 ho isa ho 41°F (-20
ho isa ho 5°C) ±0.72°F (±0.40°C) bakeng sa 41 ho isa ho 40°F (5 ho isa ho 60°C) 0 ho isa ho 20% RH, ±4% 20 ho isa ho 80% RH, ±3% 80 ho isa ho 90%RH, ±4% (ka 77°F/25°C) |
|
| E-STHS-LCD(W) | -4 ho isa ho 140°F (-20 ho isa ho 60°C) | 0 ho isa ho 90% RH | ±1.44°F (±0.80°C) bakeng sa -4 ho isa ho 41°F (-20 ho isa ho 5°C) ±0.72°F (±0.40°C) bakeng sa 41 ho isa ho 140°F (5 ho isa ho 60°C) 0 ho isa ho 20% RH, ±4% 20 ho isa ho 80% RH, ±3% 80 ho isa ho 90%RH, ±4% (ka 77°F/25°C) | |
| E-STHS-PRC | 32 ho isa ho 140°F | (0 ho isa ho 60 ° C) | 10% ho isa ho 80% RH | ± 0.4°F(±0.2°C) ± 1.8%RH@86°F (30°C) |
| E-STSP E-STSP-SL-7 | -40 ho isa ho 185°F (-40 ho isa ho 85°C) | n/a | ±1.0°F (±0.5°C). | |
Tlhaloso ea Sensor
Li-sensor tsohle tsa motsoako oa mocheso / mongobo le li-sensor tsa mongobo feela li etselitsoe ho nepahala ka har'a lintlha tse boletsoeng chateng e kaholimo. Ha lia etsetsoa ho lekoa bocha. Haeba u batla hore ho hlahlojoe sensor ea hau, ka kopo ikopanye le NTI bakeng sa RMA ho khutlisa kutlo ea hau. Ho nepahala ha sensor ho tla hlahlojoa bakeng sa tefiso ea lebitso. Li-sensor ka har'a tiisetso tse fumanoeng li se maemong a feme li tla lokisoa kapa li nkeloe sebaka ntle le tefo e eketsehileng. Mosebetsi o tlwaelehileng
kapa litefiso tsa ho nchafatsa li tla sebetsa ho lisensara tse se nang tiisetso le ho tsoa ka mokhoa o hlakileng.
Tšebeliso ea Matla
Lisebelisoa tsohle tsa rona tsa mocheso le mocheso / mongobo li sebetsa ho 5VDC 'me li hula pakeng tsa 10-56mA (e phahameng ka ho fetisisa ke ESTHS-LCDW).
Ho nepahala
Ho nepahala ho tlalehiloeng ha li-sensor tsena ho thehiloe tikolohong ea moea o tsamaeang. Ho joalo katagnant moea tikolohong, kutlo e ka bala ho feta mocheso oa 'nete.
Kakaretso
Sebaka sa tšireletso bakeng sa li-sensor tsa mocheso / mongobo ha se khone ho hlalosoa kaha ho na le mefuta e mengata haholo e ka amang sebaka sa tikoloho ea sensor.
Boitšoaro
Ha E-STHS-xx, E-STHSB kapa E-STHSM-E7 e hokahane le tsamaiso ea ENVIROMUX, litekanyetso tse tharo tsa li-sensor li tla tlalehoa bakeng sa sekepe se kopantsoeng;
Taba ea pele e tla bonts'a boleng ba mocheso oa sensor.
Ea bobeli e tla bonts'a boleng ba mongobo bo hlokometsoeng ba sensor.
Ea boraro, ke boleng bo baloang ho sebelisoa litekanyetso tsa Mocheso le Mongobo o bitsoang Dew Point. Thempereichara ea phoka ke boleng boo ho ka fihleloang mongobo oa 100%. Haeba moea le/kapa mocheso oa holim'a metsi o ka tlase ho boleng bona, ho tla ba le condensation.
Dew Point Measurement joalo ka ha e amana le Electronic Equipment
Sebaka sa phoka ke mocheso oo moea o tlala mouoane oa metsi.
Ha o pholile hape, mouoane oa metsi o tsoang moeeng o tla kopana ho etsa metsi a metsi (Phoka ke example).
Lintlha tse peli tse ka sehloohong tse susumetsang Dew Point ke Mocheso le Mongobo o Batlang. Ha mongobo o ntse o nyoloha, sebaka sa Dew Point se tla ba haufi le mocheso oa hajoale.
Sebakeng se laoloang ke habohlokoa ho boloka condensation hole le thepa ea elektronike. Lisebelisoa tse ngata tsa elektroniki li ka hloleha ho hloleha ha li le tikolohong e khutsitseng.
Hape maemong a tlase haholo a Dew Point ho na le menyetla e mengata ea ho tsoa ha static, ho beha lisebelisoa tsa elektroniki kotsing.
Hlokomela: Ho batho, Dew Points e holimo ho 21°C (70°F) le ka tlase ho -22°C (-8°F) ke libaka tse sa phutholohang.
Litemoso le Litlhokomeliso tse tsoang ho ENVIROMUX
Ho beha litlhokomeliso tsa Dew Point ho tla itšetleha ka tikoloho e behiloeng leihlo.An exampe tla ba kamore ea lisebelisoa eo ka tloaelo e sebetsang ho 21°C (70°F).
E ka ba ntho e lakatsehang ho lemosoa ha Dew Point e fihla ho 19°C (66°F) le ho hlokomelisoa ha Dew Point e fihla 21°C (70°F)
kaha condensation e ne e tla fetoha monyetla o moholo.
Bakeng sa lintlha tse tlase tsa phoka, ho ka ba molemo ho hlokomelisoa ha Dew Point e fihla ho -1°C (30°F) le ho hlokomelisoa ha phoka e fihla ho -4°C (25°F) kaha maemo ana a tla ba a phethahetseng bakeng sa static. liketsahalo tsa ho ntša.
RJ45 Sensor Cable
Mohala oa khokahanyo oa CAT5 pakeng tsa ENVIROMUX le li-sensor tsa ka ntle tse hokahaneng li felisitsoe ka li-connectors tsa RJ45 'me li tlameha ho kenngoa ka mohala ho ea ka maemo a indasteri ea EIA / TIA 568 B. Wiring e tšoana le tafole le setšoantšo se ka tlase. Li-sensor tse hokelang boema-kepeng ba "RJ45 Sensor" (E-16(U)/xD) kaofela li etselitsoe ho sebelisa likhoele tse hoketsoeng ho latela maemo ana.
| Pin | Mobala oa Mohala | Kopanya |
| 1 | Bosoeu/Namune | 2 |
| 2 | namunu | 2 |
| 3 | Bosoeu/Botala | 3 |
| 4 | Boputsoa | 1 |
| 5 | Bosoeu/Boputsoa | 1 |
| 6 | Botala | 3 |
| 7 | Bosoeu/Bosootho | 4 |
| 8 | Brown | 4 |
MOKHOEBO
ENVIROMUX le logo ea NTI ke matšoao a ngolisitsoeng a Network Technologies Inc ho la US le linaheng tse ling. Mabitso a mang kaofela le matshwao a kgwebo kapa matshwao a kgwebo a ngodisitsweng ke thepa ya beng ba ona.
MOPIRI
Copyright © 2008, 2022 ke Network Technologies Inc. Litokelo tsohle li sirelelitsoe. Ha ho karolo ea sengoliloeng sena e ka hlahisoang bocha, ho bolokoa ka mokhoa ofe kapa ofe kapa ka mokhoa ofe kapa ofe, oa elektroniki, oa mochini, oa ho etsa likopi, oa rekota, kapa ka litsela tse ling, ntle le tumello e ngotsoeng pele ho Network Technologies Inc, 1275 Danner Drive. , Aurora, Ohio 44202.
LIPHETOHO
Litaba tse tataisong ena ke tsa tlhahisoleseling feela 'me li ka fetoha ntle le tsebiso. Network Technologies Inc e na le tokelo ea ho etsa liphetoho moralong oa sehlahisoa ntle le ho behelloa ka thoko le ntle le tsebiso ho basebelisi ba eona.
MAN215 REV 3/17/2022
Litokomane / Lisebelisoa
 |
NTI ENVIROMUX Series Environmental Monitoring System Remote Network Sensor Alarm [pdf] Buka ea Taelo ENVIROMUX Series, Environmental Monitoring System Alarm Remote Network Sensor, Remote Network Sensor Alarm, Network Sensor Alarm, Sensor Alarm, Sensor |
