NEO BLINDER ARRAY W Clusterable Multipurpose RGBAW LED Blinder
Litlhaloso
- Lebitso la Sehlahisoa: BLINDER ARRAY W
- Mohlala: NEO-BLINDER ARRAY W
- Kenyeletso ea Matla: AC 100V ~ 240V 50/60Hz
- Tšebeliso ea matla: 220W
- Matla a Strobe: 600W
- Taolo ea Tsamaiso: Protocol e tloaelehileng ea DMX512/RDM
- Liteishene tsa DMX: Likhetho tse fapaneng ho tloha ho 1 ho isa ho liteishene tse 41
- Boholo: 400 x 200 x 192.5mm
- Boima ba 'mele: 10.5 lik'hilograma
Litaelo tsa Tšebeliso ea Sehlahisoa
Taolo le Mananeo:
- Hokela sehlahisoa u sebelisa 3-pin kapa 5-pin signal input/output (XLR 5-pin) kapa USB input.
- Sebelisa protocol ea DMX512/RDM ho laola litlamorao tsa mabone.
- Pontšo ea OLED e fana ka maikutlo a pono bakeng sa litlhophiso le liphetoho.
Lamp Sebōpeho sa 'Mele le Phallo ea Mocheso:
- Sehlahisoa se na le kaho ea alloy ea aluminium bakeng sa ho tšoarella.
- Sebelisa lebelo le feto-fetohang, lerata le tlase, le fene e sa keneleng metsi bakeng sa ho felisa mocheso hantle.
- Moqapi o lumella ho arohana ho sa lekanyetsoang ha li-unit tse ngata bakeng sa lisebelisoa tse atolositsoeng tsa mabone.
Matla:
- Netefatsa hore matla a kentsoeng a lumellana le mofuta o boletsoeng oa AC 100V ~ 240V 50/60Hz.
- Hokela ho sebelisa Motlakase oa Motlakase O sa Keneng Metsi (TRUE1) bakeng sa ho hokela motlakase.
Optics le Liphello:
- Sehlahisoa se fana ka lintlafatso tse potlakileng le tse bonolo ka lets'oao la DMX kapa ntlafatso ea software ea USB.
- Tšireletso e bohlale ea mocheso e sireletsa LED lamp bophelo ba tšebeletso ea lifaha.
- Natefeloa ke ho fifala ha 0~100% bakeng sa litlamorao tse fapaneng tsa mabone.
TS'IRELETSO TSEBISO
Lihlahisoa tsohle li phuthetsoe hantle ha li tsoa fekthering. Ka kopo latela bukana ea ts'ebetso ea mosebelisi, Ho hloleha ha mochini ho bakoang ke mabaka a entsoeng ke motho ha ho koaheloe ke tiisetso.
- Ha u fumana leseli, ka kopo, e phutholle ho bona hore na ha ho na tšenyo e bakiloeng ke lipalangoang. Haeba ho na le tšenyo e bakoang ke lipalangoang, ka kopo u se ke ua sebelisa l enaamp mme o ikopanye le moabi kapa moetsi kapele kamoo ho kgonehang.
- Sehlahisoa sena se loketse tšebeliso ea ka tlung, boemo ba eona ba tšireletso IP65, lamps e lokela ho bolokoa e hloekile, e qobe sebakeng se metsi kapa se lerōle, tšebeliso, e lokela ho etsoa likhoeli tse ling le tse ling tse tharo: tlhokomelo.
- Ke kopa o seke oa kenya lamp ka kotloloho holim'a lintho tse tloaelehileng tse tukang.
- Ke litsebi tse tšoanelehang feela tse ka kenyang, ho sebetsa le ho boloka lamps le mabone, 'me u netefatse hore ts'ebetso e lumellana ka thata le mekhoa e hlalositsoeng bukeng ena ea ts'ebetso.
- U se ke ua hlahisa leseli ka ho toba nthong e ka chang. Boloka sebaka se pakeng tsa luminaire le ntho e bonesitsoeng ka holimo ho limithara tse 3.
- U se ke ua sheba ka ho toba lamp mohloli o khanyang (haholo-holo bakeng sa bakuli ba lefu la sethoathoa), e le hore ba se ke ba baka tšenyo ea mahlo!
- Ke kopa o seke oa bulela lamps ho itokisa, 'me u se ke ua etsa liphetoho leha e le life mohahong oa mabone.
- Motho ea hokahanyang motlakase o tlameha ho ba le tsebo ea ho sebetsa.
- Pele o kenya, ka kopo etsa bonnete ba hore phepelo ea motlakase e ka ba tengtage u sebelisa e tšoana le voltage bonts'itsoeng ke lebone.
- E mong le e mong lamp e tla theoa hantle 'me e kenngoe motlakase ho latela maemo a amehang.
- Se ke oa hokela lebone lena ho sesebelisoa leha e le sefe se fifatsang.
- Ha lamp e fanyehiloe bophahamong, ka mabaka a ts'ireletso, ka kopo, kenya thapo ea polokeho ka moheleng kapa likarolo tse amanang le eona ho thusa ho kenya, ka kopo sheba likarolo tse amehang tsa bukana ena.
- Ha lense ea LED le sekoaelo sa khalase li hlajoa haholo kapa li robehile, li hloka ho nkeloa sebaka.
- Ka mor'a ho sebetsa ka metsotso e 5, mocheso oa holim'a lebone ke 45 ° C, 'me mocheso oa holim'a leseli ke 60 ° C ha leseli le tsitsitse (ka mor'a mocheso o sa khaotseng).
- Ha ho na likarolo tse lokisoang ke basebelisi ka har'a leseli. Pele o qala ho sebetsa lebone, ka kopo netefatsa hore lipoleiti tsohle tsa sekoaelo (kapa tse koaletsoeng) li kentsoe.
- Na li-screws li tiisitsoe ka mokhoa o sireletsehileng? Le ka mohla u se ke ua sebelisa lebone le nang le sekoahelo (kapa ntlo) se bulehileng.
- Haeba u na le lipotso kapa litlhahiso, ka kopo ikopanye le morekisi kapa moetsi.
SEBOPEHO LE HO KENYA LAMPS LE MABANE
MOKHOA OA
- Mohloli oa Leseli: 2x 300W Khubelu, Amber, Bosoeu bo Mofuthu
- Nako ea bophelo: 50000 H
- CRI: 88 @ 2800K
- Sephetho: 20.800Lm 32LM/W
- Beam Angle: 50 ° Angle ea likhohola: 87 °
TS'ELISO
- Sistimi e kopaneng ea ho kopanya mebala ea RAW
- Motlakase o potlakileng oa Strobe: 1 ~ 20 Hz
- Sekhahla sa ho Nchafatsa: 800 ~ 25K Hz(800Hz, 1.200Hz, 2.000Hz, 3.600Hz, 12kHz, 25kHz)
- Nako ea ho fifala: mefuta e meraro
- Dimmer: Li-curve tse 4 tse fifalang
- Sekena se otlolohileng: 360°
SOFTWARE
- Ntlafatso e potlakileng le e bonolo ka sesebelisoa sa DMX / sesebelisoa sa USB
- Tšireletso e bohlale ea mocheso ho netefatsa bophelo ba tšebeletso ea LED lamp lifaha
- 0 ~ 100% e fokotsehile
TAOLI LE LETSATSI
- Protocol: Protocol e tloaelehileng ea DMX512/RDM
- Khokahano ea data: 3-pin kapa 5-pin line line input/output (XLR 5-pin), USB input
- DMX channels: 1/2/4/9/6 STROBE/6RGB/10/14/13/22/24/33/10/12/17/24/41CH
- Pontšo: Pontšo ea OLED
LAMP KAHO EA MMELE LE HO PHAHAMA MOCHESO
- Mohaho oa motsoako oa aluminium
- Lebelo le feto-fetohang, lerata le tlase, fene e sa keneleng metsi, phepelo ea mocheso oa convection e qobelloang
- splicing e se nang moeli
MATLA
- Kenyelletso: AC 100V ~ 240V 50/60Hz
- Khokelo ea Motlakase: Kenyeletso ea Motlakase O sa Keneng Metsi (TRUE1)
- Matla a matla: 600W
- Tšebeliso: 220W
BA BANG
- Tekanyo ea tšireletso: IP65
- Tikoloho ea mosebetsi: -20°C ~ 40°C
- Qala tikoloho: -20°C 40°C
KHOLO
- Boholo: 400 x 200 x 192.5mm
- Boima ba 'mele: 10.5 lik'hilograma
DMX KHALE THABO
| CH | 1CH DWE | 2CH DWE | 4CH DWE | 5CH STROBE |
| 1 | Dimmer | Dimmer1 | Dimmer | Monghali Dimmer |
| 2 | Dimmer2 | Sekhahla sa Dimmer | Shutter | |
| 3 | Karabelo ea Dimmer | Nako | ||
| 4 | Redshift | Fokotsa 1 | ||
| 5 | Fokotsa 2 |
| CH | 7CH STANDARD (ea kamehla) | 10CHEKANE | 13CH E KEKETSO |
| 1 | Monghali Dimmer | Monghali Dimmer | Monghali Dimmer |
| 2 | Shutter | Shutter | Master Dimmer e ntle |
| 3 | Fokotsa 1 | Nako | Shutter |
| 4 | Fokotsa 2 | Fokotsa 1 | Nako |
| 5 | Sekhahla sa Dimmer | Fokotsa 2 | Fokotsa 1 |
| 6 | Karabelo ea Dimmer | Sekhahla sa Dimmer | Dimmer 1 e ntle |
| 7 | Redshift | Karabelo ea Dimmer | Fokotsa 2 |
| 8 | Redshift | Dimmer 2 e ntle | |
| 9 | Phello | Sekhahla sa Dimmer | |
| 10 | Litlhophiso tsa Sesebelisoa | Karabelo ea Dimmer | |
| 11 | Redshift | ||
| 12 | Phello | ||
| 13 | Litlhophiso tsa Sesebelisoa |
| 1CH DWE | ||||
| CH | Mosebetsi | Boleng | Peresente/ Boemo | Ela hloko |
| 1 | Dimmer | 000-255 | 0 - 100% | |
| 2CH RE | ||||
| CH | Mosebetsi | Boleng | Peresente/ Boemo | Ela hloko |
| 1 | Dimmer1 | 000-255 | 0 - 100% | |
| 2 | Dimmer2 | 000-255 | 0 - 100% | |
| 4CH RE | ||||
| CH | Mosebetsi | Boleng | Peresente/ Boemo | Ela hloko |
| 1 | Dimmer1 | 000-255 | 0 - 100% | |
| 2 | Sekhahla sa Dimmer | 000-51 | Ha ho na Mosebetsi - Preset ea hajoale ho tsoa ho Litlhophiso tsa Menu | |
| 052-101 | Linear Dimmer Curve | |||
| 102-152 | Exponential Dimmer Curve | |||
| 153-203 | Logarithmic Dimmer Curve | |||
| 204-255 | S-Curve Dimmer Curve | |||
| 3 | Karabelo ea Dimmer | 000-063 | Ha ho na Mosebetsi - Preset ea hajoale ho tsoa ho Litlhophiso tsa Menu | |
| 064-127 | LED / ka potlako | |||
| 128-191 | Mahareng | |||
| 192-255 | Halogen/ E liehang | |||
| 4 | Redshift | 000-084 | Ha ho na Mosebetsi - Preset ea hajoale ho tsoa ho Litlhophiso tsa Menu | |
| 085-170 | Redshift Off | |||
| 171-255 | Redshift On | |||
| 5CH STROBE | ||||
| CH | Mosebetsi | Boleng | Peresente/ Boemo | Ela hloko |
| 1 | Master Dimmer | 000-255 | 0-100% | |
| 2 | Shutter | 0-19 | Koala koala | |
| 20-24 | Shutter e bulehile | |||
| 25-64 | Strobe 1 (ka potlako → butle) | |||
| 65-69 | Shutter e bulehile | |||
| 70-84 | Strobe 2: ho bula pulse (ka potlako butle) | |||
| 85-89 | Shutter e bulehile | |||
| 90-104 | Strobe 3: ho koala sekhahla (ka potlako butle) | |||
| 105-109 | Shutter e bulehile | |||
| 110-124 | Strobe 4: strobe e sa sebetseng (e liehang ka potlako) | |||
| 125-129 | Shutter e bulehile | |||
| 130-144 | Strobe 5: phallo e sa reroang ea ho bula (e liehang ka potlako) | |||
| 145-149 | Shutter e bulehile | |||
| 150-164 | Strobe 6: phallo e koalang e sa reroang (e liehang ka potlako) | |||
| 165-169 | Shutter e bulehile | |||
| 170-184 | Strobe 7: phallo e phatlohileng (e liehang ka potlako) | |||
| 185-189 | Shutter e bulehile | |||
| 190-204 | Strobe 8: ho phatloha ho sa reroang (ho lieha ka potlako) | |||
| 205-209 | Shutter e bulehile | |||
| 210-224 | Strobe 9: sine wave (e liehang ka potlako) | |||
| 225-229 | Shutter e bulehile | |||
| 230-244 | Strobe 10: ho phatloha (ka potlako butle) | |||
| 245-255 | Shutter e bulehile | |||
| 3 | Nako | 000-255 | 0 - 100% (0ms - 510ms) | e ama feela ho kanaleng 2 Strobe
1 025-064 |
| 4 | Dimmer1 | 000-255 | 0 - 100% | |
| 5 | Dimmer2 | 000-255 | 0 - 100% | |
| 7CH STANDARD (ea kamehla) | ||||
| CH | Mosebetsi | Boleng | Tlhophiso | Ela hloko |
| 1 | Master Dimmer | 000-255 | 0-100% | |
| 2 | Shutter | 0-19 | Koala koala | |
| 20-24 | Shutter e bulehile | |||
| 25-64 | Strobe 1 (ka potlako → butle) | |||
| 65-69 | Shutter e bulehile | |||
| 70-84 | Strobe 2: ho bula pulse (ka potlako butle) | |||
| 85-89 | Shutter e bulehile | |||
| 90-104 | Strobe 3: ho koala sekhahla (ka potlako butle) | |||
| 105-109 | Shutter e bulehile | |||
| 110-124 | Strobe 4: strobe e sa sebetseng (e liehang ka potlako) | |||
| 125-129 | Shutter e bulehile | |||
| 130-144 | Strobe 5: phallo e sa reroang ea ho bula (e liehang ka potlako) | |||
| 145-149 | Shutter e bulehile | |||
| 150-164 | Strobe 6: phallo e koalang e sa reroang (e liehang ka potlako) | |||
| 165-169 | Shutter e bulehile | |||
| 170-184 | Strobe 7: phallo e phatlohileng (e liehang ka potlako) | |||
| 185-189 | Shutter e bulehile | |||
| 190-204 | Strobe 8: ho phatloha ho sa reroang (ho lieha ka potlako) | |||
| 205-209 | Shutter e bulehile | |||
| 210-224 | Strobe 9: sine wave (e liehang ka potlako) | |||
| 225-229 | Shutter e bulehile | |||
| 230-244 | Strobe 10: ho phatloha (ka potlako butle) | |||
| 245-255 | Shutter e bulehile | |||
| 3 | Dimmer1 | 000-255 | 0 - 100% | |
| 4 | Dimmer2 | 000-255 | 0 - 100% | |
| 5 | Sekhahla sa Dimmer | 000-51 | Ha ho na Mosebetsi - Preset ea hajoale ho tsoa ho Litlhophiso tsa Menu | |
| 052-101 | Linear Dimmer Curve | |||
| 102-152 | Exponential Dimmer Curve | |||
| 153-203 | Logarithmic Dimmer Curve | |||
| 204-255 | S-Curve Dimmer Curve | |||
| 6 | Dimmer - karabo | 000-063 | Ha ho na Mosebetsi - Preset ea hajoale ho tsoa ho Litlhophiso tsa Menu | |
| 064-127 | LED / ka potlako | |||
| 128-191 | Mahareng | |||
| 192-255 | Halogen/ E liehang | |||
| 7 | Redshift | 000-084 | Ha ho na Mosebetsi - Preset ea hajoale ho tsoa ho Litlhophiso tsa Menu | |
| 085-170 | Redshift Off | |||
| 171-255 | Redshift On | |||
| 215-244 | 2m - 4m50s (mehato e 10s) | |||
| 245-255 | 5m - 15m (1m mehato) |
| 10CH E KEKETSO | ||||
| CH | Mosebetsi | Boleng | Tlhophiso | Ela hloko |
| 1 | Monghali Dimmer | 000-255 | 0-100% | |
| 2 | Shutter | 0-19 | Koala koala | |
| 20-24 | Shutter e bulehile | |||
| 25-64 | Strobe 1 (ka potlako → butle) | |||
| 65-69 | Shutter e bulehile | |||
| 70-84 | Strobe 2: ho bula pulse (ka potlako butle) | |||
| 85-89 | Shutter e bulehile | |||
| 90-104 | Strobe 3: ho koala sekhahla (ka potlako butle) | |||
| 105-109 | Shutter e bulehile | |||
| 110-124 | Strobe 4: strobe e sa sebetseng (e liehang ka potlako) | |||
| 125-129 | Shutter e bulehile | |||
| 130-144 | Strobe 5: phallo e sa reroang ea ho bula (e liehang ka potlako) | |||
| 145-149 | Shutter e bulehile | |||
| 150-164 | Strobe 6: phallo e koalang e sa reroang (e liehang ka potlako) | |||
| 165-169 | Shutter e bulehile | |||
| 170-184 | Strobe 7: phallo e phatlohileng (e liehang ka potlako) | |||
| 185-189 | Shutter e bulehile | |||
| 190-204 | Strobe 8: ho phatloha ho sa reroang (ho lieha ka potlako) | |||
| 205-209 | Shutter e bulehile | |||
| 210-224 | Strobe 9: sine wave (e liehang ka potlako) | |||
| 225-229 | Shutter e bulehile | |||
| 230-244 | Strobe 10: ho phatloha (ka potlako butle) | |||
| 245-255 | Shutter e bulehile | |||
| 3 | Nako | 000-255 | 0 - 100% (0ms - 510ms) | e ama feela mocha oa 2 - Strobe 1
025-064 |
| 4 | Dimmer1 | 000-255 | 0 - 100% | |
| 5 | Dimmer2 | 000-255 | 0 - 100% | |
| 6 | Sekhahla sa Dimmer | 000-51 | Ha ho Mosebetsi - Setulo sa hajoale ho tsoa ho Litlhophiso tsa Menu | |
| 052-101 | Linear Dimmer Curve | |||
| 102-152 | Exponential Dimmer Curve | |||
| 153-203 | Logarithmic Dimmer Curve | |||
| 204-255 | S-Curve Dimmer Curve | |||
| 7 | Karabelo ea Dimmer | 000-063 | Ha ho Mosebetsi - Setulo sa hajoale ho tsoa ho Litlhophiso tsa Menu | |
| 064-127 | LED / ka potlako | |||
| 128-191 | Mahareng | |||
| 192-255 | Halogen/ E liehang | |||
| 8 | Redshift | 000-084 | Ha ho Mosebetsi - Setulo sa hajoale ho tsoa ho Litlhophiso tsa Menu | |
| 085-170 | Redshift Off | |||
| 171-255 | Redshift On |
| 9 | Phello | 000-040 | Ha ho Mosebetsi | |
| 041-083 | Phello 1 (e lieha ho fihla kapele) | |||
| 084-126 | Phello 2 (e lieha ho fihla kapele) | |||
| 0127-169 | Phello 3 (e lieha ho fihla kapele) | |||
| 170-212 | Phello 4 (e lieha ho fihla kapele) | |||
| 213-255 | Phello 5 (e lieha ho fihla kapele) | |||
| 10 | Litlhophiso tsa Sesebelisoa (ka kopo, sheba hape *1) | 000-029 | Ha ho ts'ebetso | |
| 030-034 | Hlahisa Backlight On (tšoara 3s) | |||
| 035-039 | Hlahisa Backlight Off (tšoara 3s) | |||
| 040-044 | Ha ho ts'ebetso | |||
| 045-049 | DMX Fail Blackout (tšoara 3s) | |||
| 050-054 | DMX Fail Hold (tšoara 3s) | |||
| 055-059 | DMX Fail - Leseli la Tšohanyetso (tšoara 3s) | |||
| 060-064 | Ha ho ts'ebetso | |||
| 065-069 | RAW (tšoara 3s) | |||
| 070-074 | Mosebelisi o lekantsoe (tšoara 3s) | |||
| 075-079 | Ha ho ts'ebetso | |||
| 080-084 | LED Frequency 800Hz (tšoara 3s) | |||
| 085-089 | LED Frequency 1200Hz (tšoara 3s) | |||
| 090-094 | LED Frequency 2000Hz (tšoara 3s) | |||
| 095-099 | LED Frequency 3600Hz (tšoara 3s) | |||
| 100-104 | Maqhubu a LED 12kHz (tšoara 3s) | |||
| 105-109 | Maqhubu a LED 25kHz (tšoara 3s) | |||
| 110-114 | Ha ho ts'ebetso | |||
| 115-119 | Fan Auto (tšoara 3s) | |||
| 120-124 | Fan Silent (tšoara 3s) | |||
| 125-129 | Fan Off (tšoara 3s) | |||
| 130-134 | Fan High Power (tšoara 3s) | |||
| 135-139 | Ha ho ts'ebetso |
| 140-144 | nvert Mapping On (tšoara 3s) | |||
| 145-149 | Kenyelletsa 'mapa o Tlohile (tšoara 3s) | |||
| 150-154 | Ha ho ts'ebetso | |||
| 155-159 | Mokhoa oa LED - Leseli (tšoara 1,5s) | |||
| 160-164 | Mokhoa oa LED - Matlafatsa (tšoara 1,5s) | |||
| 165-169 | Ha ho ts'ebetso | |||
| 170-174 | Hlahisa Fektheri bocha (tšoara 3s) | Ho seta bocha ho qala feela haeba kanale ea Shutter e setetsoe ho DMX 250 | ||
| 175-179 | Seta botjha (tšoara 3s) | Ho seta bocha ho qala feela haeba kanale ea Shutter e setetsoe ho DMX 250 | ||
| 180-255 | Ha ho ts'ebetso |
| 13CH E KEKETSO | ||||
| CH | Mosebetsi | Boleng | Tlhophiso | Ela hloko |
| 1 | Monghali Dimmer | 000-255 | 0-100% | |
| 2 | Master Dimmer e ntle | 000-255 | 0-100% | |
| 3 | Shutter | 0-19 | Koala koala | |
| 20-24 | Shutter e bulehile | |||
| 25-64 | Strobe 1 (ka potlako → butle) | |||
| 65-69 | Shutter e bulehile | |||
| 70-84 | Strobe 2: ho bula pulse (ka potlako butle) | |||
| 85-89 | Shutter e bulehile | |||
| 90-104 | Strobe 3: ho koala sekhahla (ka potlako butle) | |||
| 105-109 | Shutter e bulehile | |||
| 110-124 | Strobe 4: strobe e sa sebetseng (e liehang ka potlako) | |||
| 125-129 | Shutter e bulehile | |||
| 130-144 | Strobe 5: phallo e sa reroang ea ho bula (e liehang ka potlako) | |||
| 145-149 | Shutter e bulehile | |||
| 150-164 | Strobe 6: phallo e koalang e sa reroang (e liehang ka potlako) | |||
| 165-169 | Shutter e bulehile | |||
| 170-184 | Strobe 7: phallo e phatlohileng (e liehang ka potlako) | |||
| 185-189 | Shutter e bulehile | |||
| 190-204 | Strobe 8: ho phatloha ho sa reroang (ho lieha ka potlako) | |||
| 205-209 | Shutter e bulehile | |||
| 210-224 | Strobe 9: sine wave (e liehang ka potlako) | |||
| 225-229 | Shutter e bulehile | |||
| 230-244 | Strobe 10: ho phatloha (ka potlako butle) | |||
| 245-255 | Shutter e bulehile | |||
| 4 | Nako | 000-255 | 0 - 100% (0ms - 510ms) | e ama feela mocha oa 2 - Strobe 1
025-064 |
| 5 | Fokotsa 1 | 000-255 | 0 - 100% | |
| 6 | Dimmer1 e ntle | 000-255 | 0 - 100% | |
| 7 | Fokotsa 2 | 000-255 | 0 - 100% | |
| 8 | Dimmer 2 e ntle | 000-255 | 0 - 100% | |
| 9 | Sekhahla sa Dimmer | 000-51 | Ha ho Mosebetsi - Setulo sa hajoale ho tsoa ho Litlhophiso tsa Menu | |
| 052-101 | Linear Dimmer Curve | |||
| 102-152 | Exponential Dimmer Curve | |||
| 153-203 | Logarithmic Dimmer Curve | |||
| 204-255 | S-Curve Dimmer Curve | |||
| 10 | Karabelo ea Dimmer | 000-063 | Ha ho Mosebetsi - Setulo sa hajoale ho tsoa ho Litlhophiso tsa Menu | |
| 064-127 | LED / ka potlako | |||
| 128-191 | Mahareng | |||
| 192-255 | Halogen/ E liehang | |||
| 11 | Redshift | 000-084 | Ha ho Mosebetsi - Setulo sa hajoale ho tsoa ho Litlhophiso tsa Menu | |
| 085-170 | Redshift Off | |||
| 171-255 | Redshift On | |||
| 12 | Phello | 000-040 | Ha ho Mosebetsi | |
| 041-083 | Phello 1 (e lieha ho fihla kapele) | |||
| 084-126 | Phello 2 (e lieha ho fihla kapele) | |||
| 0127-169 | Phello 3 (e lieha ho fihla kapele) | |||
| 170-212 | Phello 4 (e lieha ho fihla kapele) | |||
| 213-255 | Phello 5 (e lieha ho fihla kapele) |
| 13 | Litlhophiso tsa Sesebelisoa (ka kopo, sheba hape *1) | 000-029 | Ha ho ts'ebetso | |
| 030-034 | Hlahisa Backlight On (tšoara 3s) | |||
| 035-039 | Hlahisa Backlight Off (tšoara 3s) | |||
| 040-044 | Ha ho ts'ebetso | |||
| 045-049 | DMX Fail Blackout (tšoara 3s) | |||
| 050-054 | DMX Fail Hold (tšoara 3s) | |||
| 055-059 | DMX Fail - Leseli la Tšohanyetso (tšoara 3s) | |||
| 060-064 | Ha ho ts'ebetso | |||
| 065-069 | RAW (tšoara 3s) | |||
| 070-074 | Mosebelisi o lekantsoe (tšoara 3s) | |||
| 075-079 | Ha ho ts'ebetso | |||
| 080-084 | LED Frequency 800Hz (tšoara 3s) | |||
| 085-089 | LED Frequency 1200Hz (tšoara 3s) | |||
| 090-094 | LED Frequency 2000Hz (tšoara 3s) | |||
| 095-099 | LED Frequency 3600Hz (tšoara 3s) | |||
| 100-104 | Maqhubu a LED 12kHz (tšoara 3s) | |||
| 105-109 | Maqhubu a LED 25kHz (tšoara 3s) | |||
| 110-114 | Ha ho ts'ebetso | |||
| 115-119 | Fan Auto (tšoara 3s) | |||
| 120-124 | Fan Silent (tšoara 3s) | |||
| 125-129 | Fan Off (tšoara 3s) | |||
| 130-134 | Fan High Power (tšoara 3s) | |||
| 135-139 | Ha ho ts'ebetso | |||
| 140-144 | nvert Mapping On (tšoara 3s) | |||
| 145-149 | Kenyelletsa 'mapa o Tlohile (tšoara 3s) | |||
| 150-154 | Ha ho ts'ebetso | |||
| 155-159 | Mokhoa oa LED - Leseli (tšoara 1,5s) | |||
| 160-164 | Mokhoa oa LED - Matlafatsa (tšoara 1,5s) | |||
| 165-169 | Ha ho ts'ebetso | |||
| 170-174 | Hlahisa Fektheri bocha (tšoara 3s) | Ho seta bocha ho qala feela haeba kanale ea Shutter e setetsoe ho DMX 250 | ||
| 175-179 | Seta botjha (tšoara 3s) | Ho seta bocha ho qala feela haeba kanale ea Shutter e setetsoe ho DMX 250 | ||
| 180-255 | Ha ho ts'ebetso |
TLHOKOMELO
- E le ho eketsa bophelo ba tšebeletso ea lamps le mabone, tlhokomelo ea lamps le mabone a bohlokoa haholo. Haeba tikoloho ea kantle e mpe, kapa lamps li behiloe nako e telele, mouoane oa metsi le lerōle li tla bokella sekoahelo sa lense,amp khetla, joalo-joalo, ka nako e ts'oanang e ka thibela lerōle le khase ea asiti holim'a khetla e bakoang ke ho bola.
- Khafetsa ea ho hloekisa e itšetlehile ka makhetlo a ts'ebetso le tikoloho e potolohileng. Ha u hloekisa ka lesela le bonolo le lihlahisoa tse tloaelehileng tsa ho hloekisa likhalase ka hloko, ho khothalletsoa bonyane matsatsi a mang le a mang a 20 ho hloekisa hang.
- Ka kopo u se ke ua sebelisa joala le metsoako e meng ea tlhaho ho hloekisa lamp khetla, e le hore e se ke ea baka tšenyo.
KAKARETSO MATHATA
| Ketsahalo ea ho hloleha | Lebaka la ho hloleha | Mokhoa |
| Ha ho pontšo ea menu | 1. Ha ho tlhahiso ea AC
2. Motlakase oa ho fetola matla o senyehile 3. Ho hloleha ha phanele ho bonts'a |
1. Sheba lithapo tsa motlakase
2. Sheba molumotage tlhahiso ea phepelo ea motlakase e fetohang 3. Kenya sebaka sa pontšo |
| ha e fumane lets'oao la DMX | 1. Ho hlōleha ha mohala oa letšoao la DMX
2. Tatelano ea lithapo tsa mohala oa lets'oao e fosahetse 3. Letšoao la pontšo le amohetse tšenyo ea IC 4. Tlhophiso ea khoutu ea aterese ea DMX le kholiso, taolo e tsamaellanang ha e tsamaellane 5. Phoso ea ho beha liparamente tse ling 6. Ha o kenya lenaneng, ha o tobetse konopo ea netefatso kapa konopo ea ESC ho tsoa ho menu e kholo. |
1. Sheba kapa u fetole mela ea matšoao
2. Sheba tatellano ea lithapo tsa mela ea matšoao 3. Lekola hore na lets'oao la phanele le amohela IC 'me lihanyetsi tse peli tse kentsoeng moleng oa lets'oao li bulehile. 4. Sheba kapa seta bocha khoutu ea aterese, kapa khutlisetsa li-setting tsa feme 'me u leke hape 5. Tobetsa ESC ho tswela ho menu e kgolo |
| Mocheso o ka holimo oa lamp 'mele o feta 75 ° | 1. Leseli la lamp ho hloleha ha thermistor board
2. Potoloho ea taolo ea mocheso letlapeng la pontšo ke e tsoile taolong |
1. Kenya sebaka sa thermistor
2. Sheba potoloho ea taolo ea mocheso ho motherboard |
| Lahlela leseli le tsoakiloeng ka 'mala o sa lekaneng, matheba a mebala a sa lekanang | 1. Leseli la LED ha lea nepahala
2. Lense kapa borakete ha ea kengoa hantle |
1. Hlahloba tjheseletsa ea LED lamp sefaha
2. Hlahloba mokhoa oa ho kopanya lense 'me u fetole tataiso ea kopano ea bracket |
| Lifaha ha li khanye kapa ha li panyehe hanyenyane | Tšenyo ea LED kapa ha ho na boto ea hona joale ea tlhahiso ea koloi | 1. Kenya sebaka sa LED lamp lifaha
2. Kenya sebaka sa li-leds tse senyehileng kapa u hlahlobe li-wiring tsa boto ea koloi 3. Kenya sebaka sa mokhanni ea tsamaisanang le IC |
| Liparamente ha lia bolokoa | IC bobolu bakeng sa ho boloka liparamente | Kenya sebaka sa polokelo ea IC |
| Ka kakaretso lamp e matlafetse ebile ha e sebetse | Ha mocheso o le holimo haholo, o bakoa ke ts'ireletso ea taolo ea mocheso, ho fetola phepelo ea motlakase ho feta tekano
tshireletso ha e sebetse |
Emela lamp mmele ho tsidifala pele o bulela |
LIEKETSENG LUMINAIRES
| Mekhahlelo ea Optical | |
| Mohloli oa leseli | 2x 300W Bosoeu bo Mofuthu+Amber+Bokhubelu |
| Khanya | ALL＇24250Lux@1＇ ALL:2600Lun@3＇ ALL:1200Lun@5＇ |
| Mocheso oa 'mala | WW＇2750K＇±100K＇ |
| Sistimi ea optical | Sehlahisoa se nang le lense ea mahlo e kopantsoeng |
| Lenane la tlhahiso ea mebala | Ra≥87 |
| R9 | R9≥87 |
| Boholo ba waveleng | 587nm |
| Bophelo ba mohloli oa leseli | 50000＇＇ |
| Beam angle ＇50%＇ | 50° |
| Maximum angle＇10%＇ | 87° |
| Pixel matrix | Taolo ea lintlha/taolo ka kakaretso |
| Strobe | 0＇20Hz |
| Litekanyetso tsa phepelo ea motlakase | |
| Keletso voltage le khafetsa | 100＇240VAC, 50＇60Hz |
| Khokahano ea matla | Motlakase o sa keneleng metsi, palo e kahodimodimo ya dikgokelo |
| 6@230V | |
| Khokahano ea matšoao | Mohala oa phetisetso ea mats'oao a mararo a sa keneleng metsi a kenang / sephetho, boholo |
| palo ea likhokahano 32 | |
| Matla a kamehla | 220W |
| Boholo ba matla | 610W |
| Ntlha ea matla | 0.95/230V |
| Tikoloho ea Mosebetsi | -20＇45＇ |
| Ho fetola phepelo ea motlakase | 100＇240VAC, 50＇60Hz |
| Litekanyetso tsa sebopeho | |
| Boholo | Litekanyo tsa sehlahisoa＇465*80.3*239.8mm＇ Boholo ba ho paka＇538*320*180mm |
| Boima ba 'mele | boima ba NET ~ 10.3 lik'hilograma |
| Boemo ba ts'ireletso | IP65 |
| Sistimi ea ho pholisa | Pholiso ea fene |
| Khetla | Aluminium ea die-cast, e ntšo ('mala o ka khonehang) |
| Mokhoa oa ho kenya | Sebaka se bataletseng, se leketlileng se otlolohileng, se leketlileng ka mahlakoreng |
| Taolo | |
| Mokhoa oa ho laola | DMX512/Wired RDM |
| Setsi sa DMX | 1CH DWE/2CH DWE/4CH DWE/5CH STROBE/7CH MAEMO (kamehla)/
10CHEXTENDED/13CH |
| EKETSENG | |
| Pontšo | Pontšo ea OLED e na le likonopo tse 'ne tsa ho ama |
| Sekhahla sa ho nchafatsa | 800Hz/1200Hz/2000Hz/3600Hz/12000Hz/25000Hz |
| Ho lieha ha dimmer | LED/Bohareng/Halogen |
| Khetho e fokolang ea curve | Linear /Exponential/Logarithmic/S-Curve |
| Lisebelisoa | |
| Taba e tloaelehileng | Khoele ea matla e sa keneleng metsi ea Europe 1PCS; Tlhaloso: 1PCS |
SEBOPEHO LE DIMENSION
Phetolelo ea Sesotho | NEO-BLINDER ARRAY W
FAQs
P: Nka nchafatsa software joang ho BLINDER ARRAY W?
A: U ka ntlafatsa software ka lets'oao la DMX kapa ntlafatso ea software ea USB. Sheba buka ea mosebedisi bakeng sa litaelo tse qaqileng.
P: A na nka hokela liyuniti tse ngata bakeng sa seta e kholoanyane ea mabone?
A: E, sehlahisoa se lumella ho arohana ho sa lekanyetsoang, ho u nolofalletsa ho hokahanya lihlopha tse ngata bakeng sa tlhophiso e atolositsoeng ea mabone.
Litokomane / Lisebelisoa
 |
NEO BLINDER ARRAY W Clusterable Multipurpose RGBAW LED Blinder [pdf] Buka ea Taelo BLINDER ARRAY W-8, BLINDER ARRAY W Clusterable Multipurpose RGBAW LED Blinder, BLINDER ARRAY W, Clusterable Multipurpose RGBAW LED Blinder, Multipurpose RGBAW LED Blinder, RGBAW LED Blinder, LED Blinder, Blinder |