Contents
hide
NEO BLINDER ARRAY W Clusterable Multipurpose RGBAW LED Blinder
Specifications
- Product Name: BLINDER ARRAY W
- Model: NEO-BLINDER ARRAY W
- Power Input: AC 100V ~ 240V 50/60Hz
- Power Consumption: 220W
- Strobe Power: 600W
- Control Protocol: Standard DMX512/RDM protocol
- DMX Channels: Various options from 1 to 41 channels
- Size: 400 x 200 x 192.5mm
- Weight: 10.5 kg
Product Usage Instructions
Control and Programming:
- Connect the product using a 3-pin or 5-pin signal line input/output (XLR 5-pin) or USB input.
- Use DMX512/RDM protocol to control the lighting effects.
- The OLED display provides visual feedback for settings and adjustments.
Lamp Body Structure and Heat Dissipation:
- The product features an aluminum alloy construction for durability.
- Utilize the adjustable speed, low noise, and waterproof fan for efficient heat dissipation.
- The design allows for unlimited splicing of multiple units for expanded lighting setups.
Power:
- Ensure the input power matches the specified range of AC 100V ~ 240V 50/60Hz.
- Connect using the Waterproof Power Cord Input (TRUE1) for power connection.
Optics and Effects:
- The product offers quick and easy upgrades via DMX signal or USB software update.
- Intelligent temperature protection safeguards the LED lamp beads’ service life.
- Enjoy 0~100% dimming capability for versatile lighting effects.
SECURITY GUIDANCE INFORMATION
All the products are in good packing when they leave the factory. Please follow the user's manual for operation, Machine failure caused by man-made reasons is not covered by warranty.
- Upon receipt of the luminaire, please unpack it to check for any damage caused by transportation. In case of damage due to transportation, please do not use this lamp and contact the distributor or manufacturer as soon as possible.
- This product is suitable for indoor use, its protection level IP65, lamps should be kept clean, avoid in a wet or dusty environment, use, should be carried out every three months: maintenance.
- Please do not install the lamp directly on the surface of common combustible material.
- Only qualified professionals can install, operate and maintain the lamps and lanterns, and ensure that the operation is strictly in accordance with the procedures described in this operation manual.
- Do not project the luminaire directly on the combustible object. Keep the distance between the luminaire and the illuminated object above 3 meters.
- Do not look directly at the lamp light source (especially for patients with epilepsy), so as not to cause damage to the eyes!
- Please do not turn on the lamps to repair themselves, and do not make any changes to the lighting structure.
- The person who makes the electrical connection must be qualified to operate.
- Before installation, please make sure that the power supply voltage you use is the same as the voltage indi-cated by the luminaire.
- Each lamp shall be properly grounded and electrically installed by relevant standards.
- Do not connect this luminaire to any other dimming device.
- When the lamp is suspended at a height, for safety reasons, please put the safety rope through the handle or related parts to assist the installation, please refer to the relevant parts of this manual.
- When the LED lens and the glass cover are seriously scratched or broken, they need to be replaced.
- After working for 5 minutes, the surface temperature of the luminaire is 45 ° C, and the surface temperature of the luminaire is 60 ° C when the luminaire is stable (after constant temperature).
- There are no user-repairable parts inside the luminaire. Before starting to operate the luminaire, please check that all the cover plates (or enclosures) are installed.
- Are the screws securely tightened? Never use a luminaire with the cover (or housing) open.
- If you have any questions or suggestions, please contact the distributor or manufacturer.
STRUCTURE AND INSTALLATION OF LAMPS AND LANTERNS
OPTICS
- Light Source: 2x 300W Red, Amber, Warm-White
- Lifespan: 50000 H
- CRI: 88 @ 2800K
- Output: 20.800Lm 32LM/W
- Beam Angle: 50° Flooding Angle: 87°
EFFECT
- Uniformed RAW color mixing system
- Fast Electric Strobe: 1 ~ 20 Hz
- Refresh Rate: 800 ~ 25K Hz(800Hz, 1.200Hz, 2.000Hz, 3.600Hz, 12kHz, 25kHz)
- Dimming duration: three types
- Dimmer: 4 dimming curves
- Vertical Scanning: 360°
SOFTWARE
- Quick and easy upgrade via DMX signal/USB software update
- Intelligent temperature protection to ensure the service life of LED lamp beads
- 0~100% dimming
CONTROL AND PROGRAMMING
- Protocol: Standard DMX512/RDM protocol
- Data connection: 3-pin or 5-pin signal line input/output (XLR 5-pin), USB input
- DMX channels: 1/2/4/9/6 STROBE/6RGB/10/14/13/22/24/33/10/12/17/24/41CH
- Display: OLED display
LAMP BODY STRUCTURE AND HEAT DISSIPATION
- Aluminum alloy construction
- Adjustable speed, low noise, waterproof fan, forced convection heat dissipation
- Unlimited splicing
POWER
- Input: AC 100V ~ 240V 50/60Hz
- Power Connection: Waterproof Power Cord Input (TRUE1)
- Strobe power: 600W
- Consumption: 220W
OTHERS
- Degree of protection: IP65
- Working environment: -20°C~ 40°C
- Start the environment: -20°C 40°C
SIZE
- Size: 400 x 200 x 192.5mm
- Weight: 10.5 kg
DMX CHANNEL TABLE
| CH | 1CH DWE | 2CH DWE | 4CH DWE | 5CH STROBE |
| 1 | Dimmer | Dimmer1 | Dimmer | Master Dimmer |
| 2 | Dimmer2 | Dimmer Curve | Shutter | |
| 3 | Dimmer Response | Duration | ||
| 4 | Redshift | Dimmer 1 | ||
| 5 | Dimmer 2 |
| CH | 7CH STANDARD (default) | 10CHEXTENDED | 13CH EXTENDED |
| 1 | Master Dimmer | Master Dimmer | Master Dimmer |
| 2 | Shutter | Shutter | Master Dimmer Fine |
| 3 | Dimmer 1 | Duration | Shutter |
| 4 | Dimmer 2 | Dimmer 1 | Duration |
| 5 | Dimmer Curve | Dimmer 2 | Dimmer 1 |
| 6 | Dimmer Response | Dimmer Curve | Dimmer 1 Fine |
| 7 | Redshift | Dimmer Response | Dimmer 2 |
| 8 | Redshift | Dimmer 2 Fine | |
| 9 | Effect | Dimmer Curve | |
| 10 | Device Settings | Dimmer Response | |
| 11 | Redshift | ||
| 12 | Effect | ||
| 13 | Device Settings |
| 1CH DWE | ||||
| CH | Function | Value | Percent/Setting | Remark |
| 1 | Dimmer | 000-255 | 0 – 100% | |
| 2CH WE | ||||
| CH | Function | Value | Percent/Setting | Remark |
| 1 | Dimmer1 | 000-255 | 0 – 100% | |
| 2 | Dimmer2 | 000-255 | 0 – 100% | |
| 4CH WE | ||||
| CH | Function | Value | Percent/Setting | Remark |
| 1 | Dimmer1 | 000-255 | 0 – 100% | |
| 2 | Dimmer Curve | 000-51 | No Function – Current Preset from Menu Settings | |
| 052-101 | Linear Dimmer Curve | |||
| 102-152 | Exponential Dimmer Curve | |||
| 153-203 | Logarithmic Dimmer Curve | |||
| 204-255 | S-Curve Dimmer Curve | |||
| 3 | Dimmer Response | 000-063 | No Function – Current Preset from Menu Settings | |
| 064-127 | LED / fast | |||
| 128-191 | Medium | |||
| 192-255 | Halogen / slow | |||
| 4 | Redshift | 000-084 | No Function – Current Preset from Menu Settings | |
| 085-170 | Redshift Off | |||
| 171-255 | Redshift On | |||
| 5CH STROBE | ||||
| CH | Function | Value | Percent/Setting | Remark |
| 1 | Master Dim- mer | 000-255 | 0-100% | |
| 2 | Shutter | 0-19 | Shutter close | |
| 20-24 | Shutter open | |||
| 25-64 | Strobe 1 (fast → slow) | |||
| 65-69 | Shutter open | |||
| 70-84 | Strobe 2: opening pulse (fast slow) | |||
| 85-89 | Shutter open | |||
| 90-104 | Strobe 3: closing pulse (fast slow) | |||
| 105-109 | Shutter open | |||
| 110-124 | Strobe 4: random strobe (fast slow) | |||
| 125-129 | Shutter open | |||
| 130-144 | Strobe 5: random opening pulse (fast slow) | |||
| 145-149 | Shutter open | |||
| 150-164 | Strobe 6: random closing pulse (fast slow) | |||
| 165-169 | Shutter open | |||
| 170-184 | Strobe 7: burst pulse (fast slow) | |||
| 185-189 | Shutter open | |||
| 190-204 | Strobe 8: random burst pulse (fast slow) | |||
| 205-209 | Shutter open | |||
| 210-224 | Strobe 9: sine wave (fast slow) | |||
| 225-229 | Shutter open | |||
| 230-244 | Strobe 10: burst (fast slow) | |||
| 245-255 | Shutter open | |||
| 3 | Duration | 000-255 | 0 – 100% (0ms – 510ms) | only affects to channel 2 Strobe
1 025-064 |
| 4 | Dimmer1 | 000-255 | 0 – 100% | |
| 5 | Dimmer2 | 000-255 | 0 – 100% | |
| 7CH STANDARD (default) | ||||
| CH | Function | Value | Setting | Remark |
| 1 | Master Dim- mer | 000-255 | 0-100% | |
| 2 | Shutter | 0-19 | Shutter close | |
| 20-24 | Shutter open | |||
| 25-64 | Strobe 1 (fast → slow) | |||
| 65-69 | Shutter open | |||
| 70-84 | Strobe 2: opening pulse (fast slow) | |||
| 85-89 | Shutter open | |||
| 90-104 | Strobe 3: closing pulse (fast slow) | |||
| 105-109 | Shutter open | |||
| 110-124 | Strobe 4: random strobe (fast slow) | |||
| 125-129 | Shutter open | |||
| 130-144 | Strobe 5: random opening pulse (fast slow) | |||
| 145-149 | Shutter open | |||
| 150-164 | Strobe 6: random closing pulse (fast slow) | |||
| 165-169 | Shutter open | |||
| 170-184 | Strobe 7: burst pulse (fast slow) | |||
| 185-189 | Shutter open | |||
| 190-204 | Strobe 8: random burst pulse (fast slow) | |||
| 205-209 | Shutter open | |||
| 210-224 | Strobe 9: sine wave (fast slow) | |||
| 225-229 | Shutter open | |||
| 230-244 | Strobe 10: burst (fast slow) | |||
| 245-255 | Shutter open | |||
| 3 | Dimmer1 | 000-255 | 0 – 100% | |
| 4 | Dimmer2 | 000-255 | 0 – 100% | |
| 5 | Dimmer Curve | 000-51 | No Function – Current Preset from Menu Settings | |
| 052-101 | Linear Dimmer Curve | |||
| 102-152 | Exponential Dimmer Curve | |||
| 153-203 | Logarithmic Dimmer Curve | |||
| 204-255 | S-Curve Dimmer Curve | |||
| 6 | Dimmer Res- ponse | 000-063 | No Function – Current Preset from Menu Settings | |
| 064-127 | LED / fast | |||
| 128-191 | Medium | |||
| 192-255 | Halogen / slow | |||
| 7 | Redshift | 000-084 | No Function – Current Preset from Menu Settings | |
| 085-170 | Redshift Off | |||
| 171-255 | Redshift On | |||
| 215-244 | 2m – 4m50s (10s steps) | |||
| 245-255 | 5m – 15m (1m steps) |
| 10CH EXTENDED | ||||
| CH | Function | Value | Setting | Remark |
| 1 | Master Dimmer | 000-255 | 0-100% | |
| 2 | Shutter | 0-19 | Shutter close | |
| 20-24 | Shutter open | |||
| 25-64 | Strobe 1 (fast → slow) | |||
| 65-69 | Shutter open | |||
| 70-84 | Strobe 2: opening pulse (fast slow) | |||
| 85-89 | Shutter open | |||
| 90-104 | Strobe 3: closing pulse (fast slow) | |||
| 105-109 | Shutter open | |||
| 110-124 | Strobe 4: random strobe (fast slow) | |||
| 125-129 | Shutter open | |||
| 130-144 | Strobe 5: random opening pulse (fast slow) | |||
| 145-149 | Shutter open | |||
| 150-164 | Strobe 6: random closing pulse (fast slow) | |||
| 165-169 | Shutter open | |||
| 170-184 | Strobe 7: burst pulse (fast slow) | |||
| 185-189 | Shutter open | |||
| 190-204 | Strobe 8: random burst pulse (fast slow) | |||
| 205-209 | Shutter open | |||
| 210-224 | Strobe 9: sine wave (fast slow) | |||
| 225-229 | Shutter open | |||
| 230-244 | Strobe 10: burst (fast slow) | |||
| 245-255 | Shutter open | |||
| 3 | Duration | 000-255 | 0 – 100% (0ms – 510ms) | only affects to channel 2 – Strobe 1
025-064 |
| 4 | Dimmer1 | 000-255 | 0 – 100% | |
| 5 | Dimmer2 | 000-255 | 0 – 100% | |
| 6 | Dimmer Curve | 000-51 | No Function – Current Preset from Menu Set- tings | |
| 052-101 | Linear Dimmer Curve | |||
| 102-152 | Exponential Dimmer Curve | |||
| 153-203 | Logarithmic Dimmer Curve | |||
| 204-255 | S-Curve Dimmer Curve | |||
| 7 | Dimmer Respon- se | 000-063 | No Function – Current Preset from Menu Set- tings | |
| 064-127 | LED / fast | |||
| 128-191 | Medium | |||
| 192-255 | Halogen / slow | |||
| 8 | Redshift | 000-084 | No Function – Current Preset from Menu Set- tings | |
| 085-170 | Redshift Off | |||
| 171-255 | Redshift On |
| 9 | Effect | 000-040 | No Function | |
| 041-083 | Effect 1 (slow to fast) | |||
| 084-126 | Effect 2 (slow to fast) | |||
| 0127-169 | Effect 3 (slow to fast) | |||
| 170-212 | Effect 4 (slow to fast) | |||
| 213-255 | Effect 5 (slow to fast) | |||
| 10 | Device Settings (please see re- mark *1) | 000-029 | No function | |
| 030-034 | Display Backlight On (hold 3s) | |||
| 035-039 | Display Backlight Off (hold 3s) | |||
| 040-044 | No function | |||
| 045-049 | DMX Fail Blackout (hold 3s) | |||
| 050-054 | DMX Fail Hold (hold 3s) | |||
| 055-059 | DMX Fail – Emergency Light (hold 3s) | |||
| 060-064 | No function | |||
| 065-069 | RAW (hold 3s) | |||
| 070-074 | User Calibrated (hold 3s) | |||
| 075-079 | No function | |||
| 080-084 | LED Frequency 800Hz (hold 3s) | |||
| 085-089 | LED Frequency 1200Hz (hold 3s) | |||
| 090-094 | LED Frequency 2000Hz (hold 3s) | |||
| 095-099 | LED Frequency 3600Hz (hold 3s) | |||
| 100-104 | LED Frequency 12kHz (hold 3s) | |||
| 105-109 | LED Frequency 25kHz (hold 3s) | |||
| 110-114 | No function | |||
| 115-119 | Fan Auto (hold 3s) | |||
| 120-124 | Fan Silent (hold 3s) | |||
| 125-129 | Fan Off (hold 3s) | |||
| 130-134 | Fan High Power (hold 3s) | |||
| 135-139 | No function |
| 140-144 | nvert Mapping On (hold 3s) | |||
| 145-149 | Invert Mapping Off (hold 3s) | |||
| 150-154 | No function | |||
| 155-159 | LED Mode – Illumination (hold 1,5s) | |||
| 160-164 | LED Mode – Boost (hold 1,5s) | |||
| 165-169 | No function | |||
| 170-174 | Factory Reset (hold 3s) | Reset only starts if Shutter channel is set to DMX 250 | ||
| 175-179 | User Reset (hold 3s) | Reset only starts if Shutter channel is set to DMX 250 | ||
| 180-255 | No function |
| 13CH EXTENDED | ||||
| CH | Function | Value | Setting | Remark |
| 1 | Master Dimmer | 000-255 | 0-100% | |
| 2 | Master Dimmer Fine | 000-255 | 0-100% | |
| 3 | Shutter | 0-19 | Shutter close | |
| 20-24 | Shutter open | |||
| 25-64 | Strobe 1 (fast → slow) | |||
| 65-69 | Shutter open | |||
| 70-84 | Strobe 2: opening pulse (fast slow) | |||
| 85-89 | Shutter open | |||
| 90-104 | Strobe 3: closing pulse (fast slow) | |||
| 105-109 | Shutter open | |||
| 110-124 | Strobe 4: random strobe (fast slow) | |||
| 125-129 | Shutter open | |||
| 130-144 | Strobe 5: random opening pulse (fast slow) | |||
| 145-149 | Shutter open | |||
| 150-164 | Strobe 6: random closing pulse (fast slow) | |||
| 165-169 | Shutter open | |||
| 170-184 | Strobe 7: burst pulse (fast slow) | |||
| 185-189 | Shutter open | |||
| 190-204 | Strobe 8: random burst pulse (fast slow) | |||
| 205-209 | Shutter open | |||
| 210-224 | Strobe 9: sine wave (fast slow) | |||
| 225-229 | Shutter open | |||
| 230-244 | Strobe 10: burst (fast slow) | |||
| 245-255 | Shutter open | |||
| 4 | Duration | 000-255 | 0 – 100% (0ms – 510ms) | only affects to channel 2 – Strobe 1
025-064 |
| 5 | Dimmer 1 | 000-255 | 0 – 100% | |
| 6 | Dimmer1 Fine | 000-255 | 0 – 100% | |
| 7 | Dimmer 2 | 000-255 | 0 – 100% | |
| 8 | Dimmer 2 Fine | 000-255 | 0 – 100% | |
| 9 | Dimmer Curve | 000-51 | No Function – Current Preset from Menu Set- tings | |
| 052-101 | Linear Dimmer Curve | |||
| 102-152 | Exponential Dimmer Curve | |||
| 153-203 | Logarithmic Dimmer Curve | |||
| 204-255 | S-Curve Dimmer Curve | |||
| 10 | Dimmer Respon- se | 000-063 | No Function – Current Preset from Menu Set- tings | |
| 064-127 | LED / fast | |||
| 128-191 | Medium | |||
| 192-255 | Halogen / slow | |||
| 11 | Redshift | 000-084 | No Function – Current Preset from Menu Set- tings | |
| 085-170 | Redshift Off | |||
| 171-255 | Redshift On | |||
| 12 | Effect | 000-040 | No Function | |
| 041-083 | Effect 1 (slow to fast) | |||
| 084-126 | Effect 2 (slow to fast) | |||
| 0127-169 | Effect 3 (slow to fast) | |||
| 170-212 | Effect 4 (slow to fast) | |||
| 213-255 | Effect 5 (slow to fast) |
| 13 | Device Settings (please see re- mark *1) | 000-029 | No function | |
| 030-034 | Display Backlight On (hold 3s) | |||
| 035-039 | Display Backlight Off (hold 3s) | |||
| 040-044 | No function | |||
| 045-049 | DMX Fail Blackout (hold 3s) | |||
| 050-054 | DMX Fail Hold (hold 3s) | |||
| 055-059 | DMX Fail – Emergency Light (hold 3s) | |||
| 060-064 | No function | |||
| 065-069 | RAW (hold 3s) | |||
| 070-074 | User Calibrated (hold 3s) | |||
| 075-079 | No function | |||
| 080-084 | LED Frequency 800Hz (hold 3s) | |||
| 085-089 | LED Frequency 1200Hz (hold 3s) | |||
| 090-094 | LED Frequency 2000Hz (hold 3s) | |||
| 095-099 | LED Frequency 3600Hz (hold 3s) | |||
| 100-104 | LED Frequency 12kHz (hold 3s) | |||
| 105-109 | LED Frequency 25kHz (hold 3s) | |||
| 110-114 | No function | |||
| 115-119 | Fan Auto (hold 3s) | |||
| 120-124 | Fan Silent (hold 3s) | |||
| 125-129 | Fan Off (hold 3s) | |||
| 130-134 | Fan High Power (hold 3s) | |||
| 135-139 | No function | |||
| 140-144 | nvert Mapping On (hold 3s) | |||
| 145-149 | Invert Mapping Off (hold 3s) | |||
| 150-154 | No function | |||
| 155-159 | LED Mode – Illumination (hold 1,5s) | |||
| 160-164 | LED Mode – Boost (hold 1,5s) | |||
| 165-169 | No function | |||
| 170-174 | Factory Reset (hold 3s) | Reset only starts if Shutter channel is set to DMX 250 | ||
| 175-179 | User Reset (hold 3s) | Reset only starts if Shutter channel is set to DMX 250 | ||
| 180-255 | No function |
MAINTENANCE
- In order to extend the service life of lamps and lanterns, the maintenance of lamps and lanterns is very neces-sary. If the outdoor environment is bad, or the lamps are placed for a long time, the water vapor and dust will accumulate in the lens cover, the lamp shell, etc. , at the same time also can prevent dust and acid gas on the shell caused by corrosion.
- The frequency of cleaning depends on the frequency of operation and the surrounding environment. When cle-aning with soft cloth and general glass cleaning products carefully wipe, recommended at least every 20 days to clean once.
- Please do not use alcohol and other organic solvents to clean the lamp shell, so as not to cause damage.
GENERAL TROUBLESHOOTING
| Failure phenomenon | Cause of failure | Method |
| No menu display | 1. No AC input
2. The switching power supply is damaged 3. Display panel failure |
1. Check the power lines
2. Check the voltage output of the switching power supply 3. Replace the display panel |
| not getting a DMX signal | 1. DMX signal line failure
2. The wiring sequence of the signal line is wrong 3. Signal input received signal IC damage 4. DMX address code setting and con- sole, the corresponding control does not match 5. Error setting otherparameters 6. When you enter the menu, you don＇t press the confirm key or the ESC key to exit to the main menu |
1. Check or replace signal lines
2. Check the wiring order of the signal lines 3. Check whether the display panel signal accepts IC and the two resistors strung on the signal line are open 4. Check or reset the address code, or restore the factory settings and test again 5. Press ESC to exit to the main menu |
| The surface temperature of lamp body is over 75 ° | 1. LED lamp bead board thermistor failure
2. The temperature control circuit on the display board is out of order |
1. Replace the thermistor
2. Check the temperature control circuit on the motherboard |
| Cast light mixed color uneven, uneven color spots | 1. LED welding is not correct
2. The lens or bracket is not fitted properly |
1. Check the welding of LED lamp bead
2. Inspect lens assembly process and adjust bracket assembly direction |
| The beads are not bright or flicker a little | LED damage or no current output drive board | 1. Replace LED lamp beads
2. Replace damaged leds or check drive board wiring 3. Replace the corresponding driver IC |
| Parameters are not saved | IC corruption for storing parameters | Replace the storage IC |
| The whole lamp is energized and does not work | When the temperature is too high, caused by temperature control protec- tion, switching power supply overtem- perature
protection does not work |
Wait for the lamp body to cool before turning on |
PARAMETERS OF LUMINAIRES
| Optical parameters | |
| Light source | 2x 300W Warm White+Amber+Red |
| Illumination | ALL＇24250Lux@1＇ ALL:2600Lun@3＇ ALL:1200Lun@5＇ |
| Color temperature | WW＇2750K＇±100K＇ |
| Optical systems | A reflector with a compound eye lens |
| Color rendering index | Ra≥87 |
| R9 | R9≥87 |
| Main wavelength | 587nm |
| Light source life | 50000＇＇ |
| Beam angle ＇50%＇ | 50° |
| Maximum angle＇10%＇ | 87° |
| Pixel matrix | Point Control/overall control |
| Strobe | 0＇20Hz |
| Power supply parameters | |
| Input voltage and frequency | 100＇240VAC , 50＇60Hz |
| Power connection | Waterproof power line input/output, the maximum number of connections |
| 6@230V | |
| Signal connection | Three-core waterproof signal transfer line input/output, the maximum |
| number of connections 32 | |
| Constant power | 220W |
| Maximum power | 610W |
| Power factor | 0.95/230V |
| Working Environment | -20＇45＇ |
| Switching power supply | 100＇240VAC , 50＇60Hz |
| Structure parameters | |
| Size | Product dimensions＇465*80.3*239.8mm＇ Packing size＇538*320*180mm |
| Weight | NET weight＇10.3 kg |
| Protection level | IP65 |
| Cooling system | Fan cooling |
| The shell | Die-cast aluminum, black (customizable color) |
| Installation mode | Flat ground, vertical hanging, side hanging |
| Control | |
| Control mode | DMX512/Wired RDM |
| DMX channel | 1CH DWE/2CH DWE/4CH DWE/5CH STROBE/7CH STANDARD (default)/
10CHEXTENDED/13CH |
| EXTENDED | |
| Display | The OLED display has four touch buttons |
| Refresh rate | 800Hz/1200Hz/2000Hz/3600Hz/12000Hz/25000Hz |
| Dimmer delay | LED/Medium/Halogen |
| Dimming curve selection | Linear /Exponential/Logarithmic/S-Curve |
| Accessories | |
| Standard issue | European waterproof power cord 1PCS; specification 1PCS |
SHAPE AND DIMENSION DRAWING
English Version | NEO-BLINDER ARRAY W
FAQs
Q: How can I update the software on BLINDER ARRAY W?
A: You can update the software either via DMX signal or USB software update. Refer to the user manual for detailed instructions.
Q: Can I connect multiple units for a larger lighting setup?
A: Yes, the product allows for unlimited splicing, enabling you to connect multiple units for expanded lighting configurations.
Documents / Resources
 |
NEO BLINDER ARRAY W Clusterable Multipurpose RGBAW LED Blinder [pdf] Instruction Manual BLINDER ARRAY W-8, BLINDER ARRAY W Clusterable Multipurpose RGBAW LED Blinder, BLINDER ARRAY W, Clusterable Multipurpose RGBAW LED Blinder, Multipurpose RGBAW LED Blinder, RGBAW LED Blinder, LED Blinder, Blinder |