LITŠOANTŠISO TSA SECHABA SCXI-1313A Terminal Block
Tlhahisoleseding ya Sehlahiswa
SCXI-1313A Terminal Block ke sesebelisoa sa khokahano ea matšoao se reretsoeng ho sebelisoa le mojule oa SCXI-1125. E kenyelletsa liteishene tse 18 tsa screw bakeng sa khokahano e bonolo ea lets'oao. Para e le 'ngoe ea li-screw terminals e hokahana le sebaka sa chassis ea SCXI-1125 ha lipara tse robeli tse setseng tsa li-screw terminals li hokela matšoao ho tse robeli tsa analoge. Sebaka sa li-terminal block se kenyelelitse mokotla oa fatše o sireletsehileng le sekontiri se thusang ho sireletsa lithapo tsa mats'oao. Sehlahisoa sena se entsoe ke National Instruments 'me se lumellana le lisebelisoa tse fapaneng tsa hardware le software.
Litaelo tsa Tšebeliso ea Sehlahisoa
Pele o sebelisa SCXI-1313A Terminal Block, etsa bonnete ba hore o na le lintho tse latelang:
- Hardware (SCXI-1313A Terminal Block, SCXI-1125 module, joalo-joalo)
- Lisebelisoa (screwdriver, wire stripper, joalo-joalo)
- Litokomane (SCXI-1313A Tataiso ea ho Kenya Terminal Block)
Ho hokela lets'oao ho block block, latela mehato ena:
- Sheba Tokomane ea 'Mpa Pele: Tšireletseho le Tšitiso ea Radio-Frequency pele o tlosa likoahelo tsa thepa kapa o hokela kapa o khaola lithapo life kapa life tsa matšoao.
- Hlakola li-screws tse ka holimo ebe u tlosa sekoahelo se ka holimo.
- Lokolla likurufu tsa ho imolla khatello 'me u tlose sebaka sa ho imolla khatello.
- Lokisetsa mohala oa mats'oao ka ho hlobola insulation eseng ho feta 7 mm (0.28 in.).
- Tsamaisa lithapo tsa mats'oants'o ka har'a phallo e fokotsang mathata. Haeba ho hlokahala, eketsa insulation kapa padding.
- Hokela lithapo tsa mats'oants'o ho litheminale tse loketseng tsa skruru block block, o lebisa ho Figure 1 le 2 bukeng ea ho instola tataiso bakeng sa thuso.
- Sireletsa lithapo tsa mats'oao u sebelisa sekoaelo le li-screw.
- Tlosa sekoahelo se ka holimo 'me u tiise li-screws tse ka holimo.
Hlokomela hore tlhokomeliso e lokela ho sebelisoa ha ho ts'oaroa kapa ho hokela lithapo life kapa life tsa matšoao, le hore mehato e loketseng ea polokeho e lokela ho nkuoa ho latela tokomane ea 'Male Pele: Polokeho le Tšitiso ea Radio-Frequency.
Tataiso ena e hlalosa mokhoa oa ho kenya le ho sebelisa block block ea SCXI-1313A ka module ea SCXI-1125. The SCXI-1313A terminal block e sirelelitsoe mme e na le li-screw terminals tse fanang ka likhokahano tsa ho kenya bakeng sa SCXI-1125. Mocha o mong le o mong oa SCXI-1313A o na le 100: 1 e hanyetsanang le voltage divider eo o ka e sebedisang ho metha voltagho fihla ho 150 Vrms kapa ± 150 VDC. Ka bomong, ka bo mong u ka feta voltage dividers bakeng sa low-voltaglisebelisoa tsa ho lekanya. Terminal block e na le li-screw terminal tse 18 bakeng sa khokahano e bonolo ea lets'oao. Para e le 'ngoe ea li-screws terminals e hokela sebakeng sa chassis SCXI-1125. Lipara tse robeli tse setseng tsa li-screw terminals li kopanya matšoao ho tse robeli tsa analoge.
Likopano
Litumellano tse latelang li sebelisoa tataisong ena: Letšoao le u lebisa linthong tse behiloeng tsa menu le likhetho tsa lebokose la puisano ho ea ketsong ea ho qetela. Tatelano File»Setapo sa Leqephe»Likhetho li u laela hore u theole File menu, kgetha ntho ya Ho Seta Leqephe, ebe o kgetha Dikgetho ho tswa lebokoseng la ho qetela la puisano. Letšoao lena le bolela molaetsa, o u lemosang ka lintlha tsa bohlokoa. Letšoao lena le fana ka tlhokomeliso, e u eletsang ka mehato eo u lokelang ho e nka ho qoba kotsi, tahlehelo ea data kapa ho senyeha ha sistimi. Ha letšoao lena le tšoailoe sehlahisoa, sheba ho 'Mpe Pele: Tšireletseho le Tšitiso ea Maqhubu a Sea-le-moea bakeng sa tlhahisoleseding mabapi le mehato e lokelang ho nkuoa. Ha letšoao le tšoailoe sehlahisoa, le bolela temoso e u eletsang hore u nke mehato ea ho qoba ho tsukutloa ke motlakase. Ha letšoao le tšoauoa sehlahisoa, le bolela karolo e ka 'nang ea chesa. Ho ama karolo ena ho ka baka kotsi 'meleng.
- mongolo o bold Bold o bolela lintho tseo o tlamehang ho li khetha kapa ho li tobetsa ho software, joalo ka lintho tsa menu le likhetho tsa lebokose la puisano. Mongolo o motenya o boetse o bolela mabitso a paramethara.
- Sengoloa se ngotsoeng ka mongolo o tšekaletseng se bolela lintho tse fapaneng, khatiso, litšupiso tse fapaneng, kapa selelekela sa mohopolo oa sehlooho. Mongolo o tšekaletseng o boetse o bolela mongolo oo e leng setšoantšisi sa lentsoe kapa boleng boo u tlamehang ho fana ka bona.
- Mongolo oa monospace fonteng ena o bolela mongolo kapa litlhaku tseo u lokelang ho li kenya ho tsoa ho keyboard, likarolo tsa khoutu, ex programmingamples, le syntax examples. Fonte ena e boetse e sebelisetsoa mabitso a nepahetseng a li-drive tsa disk, litsela, li-directory, mananeo, li-subprogram, li-subroutines, mabitso a lisebelisoa, mesebetsi, ts'ebetso, mefuta-futa, filemabitso, le likeketso.
- Mongolo o ngotsoeng ka mongolo o tšekaletseng ka mongolo o tšekaletseng fonteng ena o bolela mongolo oo e leng setšoantšisi sa lentsoe kapa boleng boo u tlamehang ho fana ka bona.
Seo U se Hlokang ho Qala
Ho theha le ho sebelisa block ea SCXI-1313A, o hloka lintho tse latelang:
- Lisebelisoa
- SCXI-1313A block block
- Setšoantšo sa SCXI-1125
- SCXI kapa PXI/SCXI motsoako oa chassis
- Cabling le lisensara kamoo ho hlokahalang bakeng sa ts'ebeliso ea hau
- Lisebelisoa
- Nomoro ea 1 le ea 2 ea Phillips-head screwdrivers
- 1/8 in. flathead screwdriver
- Lisebelisoa tsa nko e telele
- Sehang terata
- Mochine oa ho qhoqhoa ka terata
- Litokomane
- SCXI-1313A Tataiso ea ho kenya Terminal Block
- Mpalle Pele: Tšireletseho le Tšitiso ea Radio-Frequency
- Tataiso ea ho Qala ea DAQ
- SCXI Quick Start Guide
- SCXI-1125 Buka ea mosebelisi
- SCXI chassis kapa PXI/SCXI motsoako oa chassis buka ea mosebelisi
Ho kopanya Lipontšo
Hlokomela Sheba Tokomane ea 'Mpa Pele: Tšireletseho le Tšitiso ea Radio-Frequency pele o tlosa likoahelo tsa thepa kapa o hokela kapa o khaola lithapo life kapa life tsa matšoao.
Ho hokela lets'oao ho block block, sheba Figure 1 le 2 ha o ntse o tlatsa mehato e latelang:
- Top Cover Screws
- Sekoahelo se Phahameng
- Terminal Block Enclosure
- Sekoahelo sa monoana (2)
- Sehokedi sa Morao
- Boto ea Potoloho
- Safety-Ground Lug
- Li-Screw tsa Sekhomaretsi sa Boto ea Potoloho
- Sebaka sa ho Thusa Mathata
- Likokoana-hloko tsa Thuso
Setšoantšo sa SCXI-1313A likarolo tsa Locator
- Hlakola li-screws tse ka holimo ebe u tlosa sekoahelo se ka holimo.
- Lokolla likurufu tsa ho imolla khatello 'me u tlose sebaka sa ho imolla khatello.
- Lokisetsa mohala oa mats'oao ka ho hlobola insulation eseng ho feta 7 mm (0.28 in.).
- Tsamaisa lithapo tsa mats'oants'o ka har'a phallo e fokotsang mathata. Haeba ho hlokahala, eketsa insulation kapa padding.
- Kenya ntlha e hlobotseng ea lithapo tsa matšoao ka botlalo ka har'a theminale. Etsa bonnete ba hore ha ho terata e pepenene e fetang ho feta theminale ea screw. Mohala o pepesitsoeng o eketsa kotsi ea potoloho e khutšoanyane e ka bakang ho hlōleha ha potoloho
- Nomoro ea letoto
- Nomoro ea Kopano le Lengolo la Tlhabollo
- Relays ho nolofalletsa kapa ho feta Attenuator (libaka tse 8)
- Chassis Ground Terminal (libaka tse 2)
- Lebitso la Sehlahiswa
- Thermistor
- Screw Terminal (libaka tse 16)
- Ho Ngola Channel (libaka tse 8)
- Moqtage Divider (libaka tse 8)
- Tiisa li-screws ho torque ea 0.57 ho isa ho 0.79 N ⋅ m (5 ho isa ho 7 lb – in.).
- Kenya hape sekoahelo sa ho kokobetsa khatello 'me u tiise li-screw tse fokotsang mathata.
- Kenya sekoahelo se ka holimo hape 'me u tiise li-screw tse ka holimo.
- Hokela SCXI-1313A ho SCXI-1125 u sebelisa li-thumbscrews.
- Sheba ho SCXI Quick Start Guide ho matlafatsa chassis ea SCXI le ho lokisa sistimi ho software.
Hlokomela Bakeng sa matšeliso a nepahetseng a sebaka se batang, beha chassis hole le phapang e feteletseng ea mocheso
Ho hlophisa Molumo o Phahamengtage Attenuator
Seteishene se seng le se seng se na le 100: 1 high-voltage attenuator. Ho nolofaletsa kapa ho tima attenuator, fetola li-setting tsa tlhophiso tsa kamehla bakeng sa SCXI-1313A ho Measurement & Automation Explorer (MAX) kapa u lokise meedi ea ho kenya ts'ebelisong ea hau. Ha o sebelisa liteishene tsa sebele, meeli ea ho kenya e hlophisitsoeng ho setlhophiso sa mocha oa sebele e sebelisoa ho beha potoloho ea attenuation ka nepo. Hlokomela SCXI-1313 ke moqapi oa bobeli ba SCXI-1313 le SCXI-1313A ho MAX le NI-DAQ. EEPROM ea calibration ho SCXI-1313A e boloka likarolo tsa calibration tse fanang ka litekanyetso tsa tokiso ea software. Litekanyetso tsena li sebelisoa ke software ea nts'etsopele ea ts'ebeliso ho lokisa litekanyo bakeng sa liphoso tsa ho fumana li-circuits tsa attenuation.
| Ka kakaretso Fumana |
Ka kakaretso Moqtage Range1 |
Mojule Fumana | Theminale Thibela Phaello |
| 0.02 | ± 150 Vrms kapa ± 150 VDC | 2 | 0.01 |
| 0.05 | ± 100 Vtlhoro kapa ±100 VDC | 5 | 0.01 |
| 0.1 | ± 50 Vtlhoro kapa ±50 VDC | 10 | 0.01 |
| 0.2 | ± 25 Vpeak kapa ± 25 VDC | 20 | 0.01 |
| 0.5 | ± 10 Vtlhoro kapa ±10 VDC | 50 | 0.01 |
| 1 | ± 5 Vtlhoro kapa ±5 VDC | 1 | 1 |
| 2 | ± 2.5 Vpeak kapa ± 2.5 VDC | 2 | 1 |
| 2.5 | ± 2 Vpeak kapa ± 2 VDC | 250 | 0.01 |
| 5 | ± 1 Vtlhoro kapa ±1 VDC | 5 | 1 |
| 10 | ± 500 mVtlhoro kapa ± 500 mVDC | 10 | 1 |
| 20 | ± 250 mVpeak kapa ± 250 mVDC | 20 | 1 |
| 50 | ± 100 mVtlhoro kapa ± 100 mVDC | 50 | 1 |
| 100 | ± 50 mVtlhoro kapa ± 50 mVDC | 100 | 1 |
| 200 | ± 25 mVpeak kapa ± 25 mVDC | 200 | 1 |
| 250 | ± 20 mVtlhoro kapa ± 20 mVDC | 250 | 1 |
| Ka kakaretso Fumana |
Ka kakaretso Moqtage Range1 |
Mojule Fumana | Theminale Thibela Phaello |
| 500 | ± 10 mVtlhoro kapa ± 10 mVDC | 500 | 1 |
| 1000 | ± 5 mVtlhoro kapa ± 5 mVDC | 1000 | 1 |
| 2000 | ± 2.5 mVpeak kapa ± 2.5 mVDC | 2000 | 1 |
| 1 Sheba ho Litlhaloso karolo ea sebaka sa ho kenya. | |||
Ho lekanya Terminal Block
Litokomane tse ngata tsa kantle tsa tlhahlobo ea sehlahisoa sa SCXI lia fumaneha hore u ka khoasolla ho tsoa ho ni.com/calibration ka ho tobetsa Mehato ea Tlhakiso ea Manual. Bakeng sa tlhahlobo ea kantle ea lihlahisoa tse sa thathamisitsoeng moo, Tšebeletso ea Motheo ea Calibration kapa Detailed Calibration Service ea khothaletsoa. U ka fumana leseli mabapi le lits'ebeletso tsena tse peli tsa calibration ho ni.com/calibration. NI e khothaletsa ho etsa tlhahlobo ea kantle hang ka selemo.
Sephetho sa Sensor ea Mocheso le ho Nepaha
The SCXI-1313A sensor ea mocheso e hlahisa 1.91 ho 0.65 V ho tloha 0 ho ea 50 °C.
Ho fetola Thermistor Voltage ho Mocheso
Software ea NI e ka fetola thermistor voltage ho mocheso oa thermistor bakeng sa setšoantšo sa potoloho se bontšitsoeng ho Setšoantšo sa 3. LabVIEW, u ka sebelisa Convert Thermistor Reading VI e fumanoang ho Data Acquisition»Signal Conditioning palette. Haeba u sebelisa CVI kapa NI-DAQmx, sebelisa mosebetsi oa Thermistor_Convert. VI e nka tlhahiso ea voltage ea sensor ea mocheso, molumo oa referensetage, le ho hanyetsa ka nepo le ho khutlisa mocheso oa thermistor. Ntle le moo, o ka sebelisa mekhoa e latelang: T(°C) = TK – 273.15
moo TK e leng mocheso oa Kelvin
- a = 1.295361 × 10–3
- b = 2.343159 × 10–4
- c = 1.018703 × 10–7
RT = khanyetso ea thermistor ka ohms
VTEMPOUT = tlhahiso ea voltage ea sensor ea mocheso
moo T(°F) le T(°C) e leng lipalo tsa mocheso ka likhato tsa Fahrenheit le likhato tsa Celsius, ka ho latellana. Hlokomela Sebelisa karolelano ea palo e kholo ea sample ho fumana 'malo o nepahetseng haholo. Libaka tse lerata li hloka samples bakeng sa ho nepahala ho hoholo.
Ho bala Sensor ea Mocheso ho LabVIEW
Ka LabVIEW, ho bala VTEMPOUT, sebelisa NI-DAQmx ka khoele e latelang: SC(x)Mod(y)/_cjTemp Ho bala VTEMPOUT ka Traditional NI-DAQ (Legacy), sebelisa khoele ea aterese: obx ! scy! mdz! cjtemp U ka ba le khoele ea aterese ea kanale ka har'a lethathamo la likhoele tse tšoanang le likanale tse ling mojuleng o tšoanang oa SCXI-1125 'me u e bitsa hangata ka har'a lethathamo la likhoele tse tšoanang. Bakeng sa tlhaiso-leseling e batsi mabapi le li-channel-string arrays le syntax ea li-address tsa SCXI, bona Lab.VIEW Litekanyo Bukana
Setšoantšo sa Potoloho ea Sensor ea mocheso
Ha ho hlokahale hore u bale karolo ena ho sebelisa SCXI-1313A. Setšoantšo sa potoloho ho Setšoantšo sa 3 ke boitsebiso ba boikhethelo boo u ka bo sebelisang haeba u batla lintlha tse eketsehileng mabapi le mocheso oa mocheso oa SCXI-1313A.
Litlhaloso
Litlhaloso tsohle li tloaelehile ho 25 ° C ntle le ha ho boletsoe ka tsela e 'ngoe.
- Mefuta e kenyellelitsoeng …………………………………………….150 Vrms kapa VDC
- Sehlopha sa litekanyo………………………….CAT II
- Likanale tse kenyang………………………………………..8
Sensor-junction e batang
- Mofuta oa sensor ……………………………………..Thermistor
- Nepahalo1 …………………………………….±0.5 °C ho tloha ho 15 ho isa ho 35 °C ±0.9 °C ho tloha 0 ho isa 15 °C le 35 ho isa ho 55 °C
- Pheta-pheta ………………………………±0.2 °C ho tloha ho 15 ho isa ho 35 °C
- Sephetho ………………………………………………… 1.91 ho isa ho 0.65 V ho tloha ho 0 ho isa ho 50 °C
- Boemo bo phahameng ba mocheso lipakeng tsa sensor le terminal efe kapa efe…. ±0.4 °C (e seng isothermal) E phahameng-voltage divider
- Ho nepahala …………………………………………… ±0.06% (bakeng sa litlhophiso tsa 100:1)
- Drift…………………………………………………. 15 ppm/°C
- Resistance ………………………………………… 1 MΩ
- Attenuation ratio ………………………….. 100:1 kapa 1:1 ho latela lenaneo
Ho itšehla thajana ka mokhoa o tloaelehileng
- Channel ho ea ho kanale……………………….. 150 Vrms kapa ±150 VDC
- Channel ho ea fatše………………………… 150 Vrms kapa ±150 VDC
- Ho kopanya………………………………………… DC feela
Lihokelo tsa lithapo tsa lebaleng Li-terminals tsa Screw
- Li-terminals tsa matšoao …………………….. 16 (lipara tse 8)
- Li-terminals tsa fatše tse sebetsang…. 2
- Boholo ba terata gauge ………….. 16 AWG
- Sekheo sa litheminale ………………… 0.5 cm (0.2 in.) bohareng ho isa bohareng
- Boholo ba monyako o ka pele ………. 1.2 × 7.3 cm (0.47 × 2.87 in.)
Lisebelisoa tsa solder bakeng sa
- likarolo tse ling …………………..Ha ho letho
- Lisebelisoa tsa polokeho ea lefats'e ……………….. 1
- Ho imolla khatello ea maikutlo ……………………………………. Sebaka sa liphallelo ho
- monyako oa li-terminal-block
- Boholo ba mosebetsi oa voltage………………….. 150 V
Ea nama
Boima ba 'mele ………………………………………………….408 g (14.4 oz)
Tikoloho
- Mocheso oa ho sebetsa ………………………….0 ho isa ho 50 °C
- Mocheso oa polokelo ………………………………..–20 ho 70 °C
- Mongobo………………………………………………….10 ho isa ho 90% RH, ha e fokotsehe
- Boholo ba bophahamo ………………………………..2,000 metres
- Tekanyo ea Pollution (tšebeliso ea ka tlung feela) ……..2
Polokeho
Sehlahisoa sena se etselitsoe ho fihlela litlhoko tsa litekanyetso tse latelang tsa polokeho bakeng sa lisebelisoa tsa motlakase bakeng sa tekanyo, taolo le ts'ebeliso ea laboratori:
- IEC 61010-1, EN 61010-1
- UL 61010-1, CSA 61010-1
Tlhokomeliso Bakeng sa UL le litifikeiti tse ling tsa polokeho, sheba leibole ea sehlahisoa kapa etela ni.com/ certification, batla ka nomoro ea mohlala kapa mohala oa sehlahisoa, 'me u tobetse sehokelo se loketseng kholomong ea Setifikeiti.
Tšebelisano ea Motlakase
Sehlahisoa sena se etselitsoe ho fihlela litlhoko tsa litekanyetso tse latelang tsa EMC bakeng sa lisebelisoa tsa motlakase bakeng sa tekanyo, taolo le ts'ebeliso ea laboratori:
- Litlhoko tsa EN 61326 EMC; Bonyane Immunity
- Metsi ea EN 55011; Sehlopha sa 1, Sehlopha sa A
- CE, C-Tick, ICES, le FCC Karolo ea 15 Emissions; Sehlopha sa A
Hlokomela Ho latela melao ea EMC, sebelisa sesebelisoa sena ho latela litokomane tsa sehlahisoa.
Ho lumellana ha CE
Sehlahisoa sena se kopana le litlhoko tsa bohlokoa tsa Litaelo tsa Europe tse sebetsang, joalo ka ha li fetotsoe bakeng sa ho tšoaea CE, ka tsela e latelang:
- 2006/95/EC; Molumo o tlasetage Directive (tšireletseho)
- 2004/108/EC; Taelo e lumellanang ea Motlakase (EMC)
Tlhokomeliso Sheba Sheba Declaration of Conformity (DoC) bakeng sa sehlahisoa sena bakeng sa tlhahisoleseding efe kapa efe ea tlatsetso ea melao ea tsamaiso. Ho fumana DoC bakeng sa sehlahisoa sena, etela ni.com/ certification, batla ka nomoro ea mohlala kapa mohala oa sehlahisoa, 'me u tobetse sehokelo se loketseng kholomong ea Setifikeiti.
Tsamaiso ea Tikoloho
National Instruments e ikemiseditse ho rala le ho etsa dihlahiswa ka mokgwa o nang le boikarabelo tikolohong. NI e hlokomela hore ho tlosa lintho tse ling tse kotsi lihlahisoa tsa rona ha ho na thuso ho tikoloho feela empa le ho bareki ba NI. Bakeng sa lintlha tse ling tsa tikoloho, sheba NI le Tikoloho Web leqepheng la ni.com/environment. Leqephe lena le na le melao le litaelo tsa tikoloho tseo NI e li ikobelang, hammoho le tlhahisoleseding efe kapa efe e meng ea tikoloho e sa kenyelletsoeng tokomaneng ena.
Thepa ea Matla a Motlakase le Elektronike (WEEE)
EU Customers Qetellong ea potoloho ea bophelo ba bona, lihlahisoa tsohle li tlameha ho romeloa setsing sa WEEE sa recycling. Bakeng sa tlhaiso-leseling e batsi mabapi le litsi tsa ntlafatso tsa WEEE le matsapa a National Instruments WEEE, etela ni.com/environment/weee.htm.
National Instruments, NI, ni.com, le LabVIEW ke matšoao a khoebo a National Instruments Corporation. Sheba karolo ea Melao ea Tšebeliso ho ni.com/legal bakeng sa tlhahisoleseding e eketsehileng mabapi le matshwao a kgwebo a National Instruments. Mabitso a mang a lihlahisoa le a khamphani a boletsoeng mona ke matšoao a khoebo kapa mabitso a khoebo a lik'hamphani tse fapaneng. Bakeng sa litokelo tsa molao tse koahelang lihlahisoa tsa National Instruments, sheba sebaka se loketseng: Thuso»Patents ho software ea hau, patents.txt file mecheng ea litaba ea hau, kapa ni.com/patents. © 2007–2008 National Instruments Corporation. Litokelo tsohle li sirelelitsoe
Litokomane / Lisebelisoa
 |
LITŠOANTŠISO TSA SECHABA SCXI-1313A Terminal Block [pdf] Tlhophiso Tataiso SCXI-1313A Terminal Block, SCXI-1313A, Terminal Block, Block |
