Lethathamo la lintlha tsa V2406C
Tataiso ea ho Kenya ka Potlako
Lik'homphieutha tse kenyelelitsoeng
Phetolelo ea 1.2, Loetse 2021
Information Support Contact Information
www.moxa.com/support
P/N: 1802024060042
Fetileview
Likhomphutha tse kentsoeng tsa V2406C Series li thehiloe ho li-processor tsa Intel® 7th le 8th Gen 'me li na le likou tse 4 tsa RS-232/422/485, likou tse peli tsa LAN, le likou tse 4 tsa USB 3.0. Lik'homphieutha tsa V2406C li tla le 1 VGA e hlahisoang le 1 HDMI port e nang le tšehetso ea 4k resolution. Lik'homphieutha li lumellana le lintlha tsa EN 50155: 2017, tse koahelang mocheso o sebetsang, matla a ho kenya matla.tage, surge, ESD, le vibrate, e etsang hore li tšoanelehe bakeng sa lits'ebetso tse fapaneng tsa indasteri.
Sebaka sa mSATA, lihokelo tsa SATA, le likou tsa USB li fa likhomphutha tsa V2406C ts'epahalo e hlokahalang bakeng sa lits'ebetso tsa indasteri tse hlokang katoloso ea polokelo bakeng sa ho boloka data. Habohlokoa le ho feta, likhomphutha tsa V2406C li tla le literei tse 2 tsa polokelo bakeng sa ho kenya mecha ea litaba ea polokelo e eketsehileng, joalo ka hard disk kapa solid-state drives, e ts'ehetsang phetoho e chesang bakeng sa phetisetso e bonolo, e potlakileng le e bonolo ea polokelo. Sebaka se seng le se seng sa polokelo se na le LED ea sona e bontšang hore na mochine oa polokelo o kentsoe.
Lethathamo la Pakete
Sephutheloana se seng le se seng sa mohlala oa sistimi se romelloa ka lintho tse latelang:
- V2406C Series e kenyellelitsoeng k'homphieutha
- Setsi sa ho hloa mabota
- Li-trays tse 2 tsa HDD
- Li-screw tse 8 tsa ho boloka literei tsa HDD
- Sesebelisoa sa thapo sa HDMI
- Tataiso ea ho kenya kapele (e hatisitsoe)
- Karete ea tiisetso
Ho kenya Hardware
Pele View
Ka morao View
Litekanyo
Lipontšo tsa LED
Tafole e latelang e hlalosa matšoao a LED a fumanehang ka pele le ka morao ea komporo ea V2406C.
| LED Lebitso | Boemo | Mosebetsi |
| Matla (Ka konopo ea matla) | Botala | Matla a teng |
| E tima | Ha ho motlakase kapa phoso efe kapa efe ea matla | |
| Ethernet (100 Mbps) (1000 Mbps) | Botala | E tsitsitseng: 100 Mbps Ethernet sehokelo Ho panya: Phetiso ea data e ntse e tsoela pele |
| Bosehla | E tsitsitseng: 1000 Mbps Ethernet sehokelo Ho panya: Phetiso ea data e ntse e tsoela pele |
|
| E tima | Lebelo la phetiso ea data ho 10 Mbps kapa thapo ha e hokahane | |
| Lethathamo (TX/RX) | Botala | Tx: Phetiso ea data e ntse e tsoela pele |
| Bosehla | Rx: Ho Fumana Boitsebiso | |
| E tima | Ha ho ts'ebetso | |
| Polokelo | Bosehla | Lintlha li ntse li fumaneha ho tsoa ho li-drive tsa mSATA kapa tsa SATA |
| E tima | Lintlha ha li fumanehe ho tsoa ho li-drive tsa polokelo |
Ho kenya V2406C
K'homphieutha ea V2406C e tla le li-brackets tse peli tse kentsoeng leboteng. Hokela li-brackets khomphuteng u sebelisa li-screw tse 'nè ka lehlakoreng le leng. Netefatsa hore li-brackets tse ntseng li hokahantsoe li hokeletsoe komporong ea V2406C ka tsela e bontšitsoeng setšoantšong se latelang.
Li-screws tse robeli tsa li-brackets tse ntseng li kenngoa li kenyelelitsoe ka har'a sephutheloana sa lihlahisoa. Ke li-screw tse tloaelehileng tsa IMS_M3x5L 'me li hloka torque ea 4.5 kgf-cm. Sheba papiso e latelang bakeng sa lintlha.
Sebelisa li-screw tse peli (M3 * 5L standard e khothalelitsoe) ka lehlakoreng le leng ho hokela V2406C leboteng kapa khabinete. Sephutheloana sa sehlahisoa ha se kenye li-screws tse 'nè tse hlokehang bakeng sa ho kopanya lerako la lebota leboteng; li hloka ho rekoa ka thoko. Netefatsa hore komporo ea V2406C e kentsoe ka lehlakoreng le bontšitsoeng setšoantšong se latelang.
Ho hokela Matla
Lik'homphieutha tsa V2406C li na le lihokelo tsa motlakase oa M12 karolong e ka pele. Hokela lithapo tsa motlakase ho likhokahanyo ebe u tiisa likhokahano. Tobetsa konopo ea matla; Power LED (konopo ea matla) e tla khantša ho bontša hore matla a fanoa khomphuteng. Ho lokela ho nka metsotsoana e ka bang 30 ho isa ho e 60 hore sistimi e phethe mosebetsi oa ho qalisa.
| Pina ea 1 | Tlhaloso |
| 2 | V+ |
| 3 | NC |
| 4 | V- |
| NC |
Litaelo tsa ho kenya motlakase li fanoe ka tlase:
• Lisebelisoa tse kholo tsa DC tse nang le matla a matla a 24 V @ 2.74 A; 100 V @ 0.584 A, le bonyane ba 18 AWG.
Bakeng sa tšireletso ea ho surge, hokela sehokelo sa fatše se ka tlase ho sehokelo sa matla le lefatše (fatše) kapa bokaholimo ba tšepe.
Ho kopanya Lipontšo
V2406C e na le 1 VGA interface e tlang le sehokelo sa basali sa D-Sub 15-pin. Ho phaella moo, sebopeho se seng sa HDMI se boetse se fanoa ka lehlakoreng le ka pele.
HLOKOMELA: E le hore u be le video e ka tšeptjoang haholo, sebelisa lisebelisoa tsa premium, HDMI-certified.
Li-port tsa USB
V2406C e tla le likou tse peli tsa USB 2 phanele e ka pele le likou tse ling tse 3.0 tsa USB 2 karolong e ka morao. Likou tsa USB li ka sebelisoa ho hokahanya le lisebelisoa tse ling, joalo ka keyboard, mouse, kapa li-flash drive bakeng sa ho holisa bokhoni ba polokelo ea sistimi.
Li-ports tsa serial
V2406C e tla le likou tse 4 tse khethiloeng tsa RS-232/422/485 karolong e ka morao. Boema-kepe ba 1 le Port 2 ke boema-kepe ba UART bo ikhethileng. Likou li sebelisa lihokelo tsa banna tsa DB9.
Sheba tafole e latelang bakeng sa likabelo tsa phini:
|
Pin |
RS-232 | RS-422 | RS-485 (4-terata) |
RS-485 (2-terata) |
|
1 |
DCD |
TXDA (-) |
TXDA (-) |
– |
|
2 |
RxD |
TxDB(+) |
TxDB(+) |
– |
|
3 |
TxD |
RxDB(+) |
RxDB(+) |
BoitsebisoB(+) |
|
4 |
DTR |
RxDA(-) |
RxDA(-) |
LintlhaA(-) |
| 5 | GND | GND | GND |
GND |
|
6 |
DSR |
– |
– |
– |
|
7 |
RTS |
– |
– |
– |
|
8 |
CTS |
– |
– |
– |
Li-ports tsa Ethernet
V2406C e na le likou tse 2 100/1000 Mbps RJ45 Ethernet tse nang le lihokelo tsa M12 karolong e ka morao. Sheba tafole e latelang bakeng sa likabelo tsa phini:
| Pin | Tlhaloso |
| 1 | DA+ |
| 2 | DA- |
| 3 | DB+ |
| 4 | DB- |
| 5 | DD+ |
| 6 | DD- |
| 7 | DC- |
| 8 | DC+ |
Digital Inputs/Digital Outputs
V2406C e tla le lisebelisoa tse tšeletseng tsa dijithale le liphetho tse peli tsa dijithale ka har'a block ea terminal. Sheba lipalo tse latelang bakeng sa litlhaloso tsa phini le lintlha tsa hajoale.
| Lisebelisoa tsa Dijithale Ho omella Logic 0: Short to Ground Ntlha ea 1: Bula Kopana le Metsi (DI ho ea ho COM) Logic 1: 10 ho isa ho 30 VDC Logic 0: 0 ho 3 VDC |
Digital Outputs Lintlha tsa Hona Joale: 200 mA mocha ka mong Moqtage: 24 ho 30 VDC |
Bakeng sa lintlha tse qaqileng tsa mekhoa ea ho kenya likhoele, sheba Bukana ea Basebelisi ba Hardware V2406C.
Ho kenya li-Store Disks
V2406C e na le li-sockets tse peli tsa polokelo, tse lumellang basebelisi ho kenya li-disk tse peli bakeng sa polokelo ea data.
Latela mehato ena ho kenya hard disk drive.
- Hlakola terei ea polokelo ho tsoa sephutheloana sa sehlahisoa.
- Beha disk drive holim'a tray.
- Fetola tlhophiso ea disk le tray ho potoloha view lehlakore le ka morao la terei. Fasten li-screws tse 'nè ho tiisa disk ho tray.
- Tlosa sekoere sekoahelong sa sekotjana sa polokelo 'me u thellele sekoahelo fatše ho fihlella sekotjana.
- Fumana sebaka sa terene ea tray ea disk.
- Kenya terei e le hore e ikamahanye le liporo ka mahlakoreng a mabeli 'me u kenye terei ka har'a slot.
Ho ntša terei, hula clutch ka ho le letona ebe u hula terei ka ntle.
Bakeng sa litaelo tsa ho kenya lisebelisoa tse ling tsa peripheral kapa li-module tsa waelese, sheba Bukana ea Basebelisi ba Hardware V2406C.
HLOKOMELA: Khomphuta ena e reretsoe ho kengoa sebakeng se thibetsoeng ho kena feela. Ho phaella moo, ka mabaka a tšireletso, k'homphieutha e lokela ho kenngoa le ho tšoaroa feela ke litsebi tse tšoanelehang le tse nang le phihlelo.
HLOKOMELA: Khomphuta ena e etselitsoe hore e fanoe ke lisebelisoa tse thathamisitsoeng ho 24 ho isa ho 110 VDC, bonyane 2.74 ho 0.584 A, le minimumTma=70˚C. Haeba o hloka thuso ka ho reka adaptara ea motlakase, ikopanye le sehlopha sa tšehetso sa tekheniki sa Moxa.
HLOKOMELA: Setsi sena se reretsoe ho fanoa ke DC Busway, se hlahisoang ke 24 ho isa ho 110 VDC, bonyane 2.74 A, le mohloli oa Matla oa DC o nang le vol.tage mamello ea + 20% le -15%. Bakeng sa mohlalaample, mohloli oa matla o thathamisitsoeng ka UL o loketseng ho sebelisoa ka bonyane ba Tma 75°C, o lekantsoe ho 24 ho isa ho 110 VDC le 2.74 A bonyane.
Ho fetola Battery
V2406C e tla le slot e le 'ngoe bakeng sa betri, e kentsoeng ka betri ea lithium e nang le lintlha tsa 3 V/195 mAh. Ho khutlisa betri, latela mehato e ka tlase:
- Sekoaelo sa betri se ka lehlakoreng le ka pele la komporo.
- Tlosa li-screws tse peli sekoahelong sa betri.
- Tlosa sekoahelo; betri e khomaretsoe sekoahelong.
- Arola sehokelo 'me u tlose likurufu tse peli holim'a poleiti ea tšepe.
- Tlosa betri e ncha ka har'a sets'oants'o sa betri, beha tšepe holim'a betri ebe u fasa likurufu tse peli ka thata.
- Hokela sehokelo hape, beha se ts'oereng betri ka har'a sekotjana, 'me u sireletse sekoaelo sa sekotjana ka ho tiisa li-screws tse peli sekoahelong.
HLOKOMELA: Etsa bonnete ba hore o sebelisa mofuta o nepahetseng oa betri. Betri e fosahetseng e ka baka tšenyo ea sistimi. Ikopanye le basebetsi ba tšehetso ea tekheniki ea Moxa bakeng sa thuso, ha ho hlokahala.
Litokomane / Lisebelisoa
 |
MOXA V2406C Series Intel 7th Gen Core processor Railway e kenelletseng likhomphutha [pdf] Tlhophiso Tataiso V2406C Series, Intel 7th Gen Core Processor Railway e kenyellelitsoeng likhomphutha, V2406C Series Intel 7th Gen Core processor Railway e kenelletseng likhomphutha. |
