MOXA EDS-518E Series Layer 2 Managed Ethernet Switch
Lethathamo la Pakete
EDS-518E e romelloa le lintho tse latelang. Haeba e 'ngoe ea lintho tsena e le sieo kapa e senyehile, ka kopo ikopanye le moemeli oa litšebeletso tsa bareki bakeng sa thuso.
- 1 EDS-518E Ethernet switch
- Mohala oa USB
- Li-caps tse sireletsang bakeng sa likou tse sa sebelisoeng
- Tataiso ea ho kenya kapele (e hatisitsoe)
- Karete ea tiisetso
Sebopeho
- Likou tse 4 tsa Gigabit combo Ethernet hammoho le likou tse 14 tsa Fast Ethernet tsa koporo le fiber
- Turbo Ring le Turbo Chain (nako ea ho hlaphoheloa <20 ms @ 250 switches), RSTP/STP, le MSTP bakeng sa tlhokeho ea netweke.
- RADIUS, TACACS+, SNMPv3, IEEE 802.1x, HTTPS, le SSH ho matlafatsa ts'ireletso ea marang-rang.
- EtherNet/IP, PROFINET, le liprothokholo tsa Modbus/TCP tse tšehelitsoeng bakeng sa taolo le tlhahlobo ea sesebelisoa
Phanele Views tsa EDS-518E
- Seta botjha konopo
- Boema-kepe ba USB console
- Li-switches tsa DIP bakeng sa Turbo Ring, Ring Master, le Ring Coupler
- Sesepa sa motheo
- Li-terminal block tsa 4-pin bakeng sa kenyelletso ea dijithale le ho kenya matla 2
- Li-terminal block tsa 4-pin bakeng sa tlhahiso ea relay le ho kenya matla 1
- Boema-kepe ba 10/100BaseT(X), boema-kepe ba 1 ho isa ho 14
- 100BaseT(X) Letšoao la LED
- 10BaseT(X) Letšoao la LED
- Boemo ba sistimi ea LED:
STATE LED pontshi
Letšoao la LED la PWR1
Letšoao la LED la PWR2
PHOSO EA LED letšoao
Letšoao la LED la MSTR / HEAD
Letšoao la LED la CPLR/TAIL - Kou ea polokelo ea USB
- Letšoao la LED la G1 ho ea ho G4
- 10/100/1000BaseT(X) kapa
100/1000BaseSFP combo port, boema-kepe ba G1 ho isa G4 - Lebitso la Mohlala
- Sekoti bakeng sa Wall Mounting Kit
- DIN-Rail Kit
Phanele Views ea EDS-518E (SC/ST Mofuta)
HLOKOMELA:
Ponahalo ea EDS-518E-SS-SC e tšoana le EDS-518E-MM-SC. Ponahalo ea
EDS-518E-MM-ST e tšoana le EDS-518E-MM-SC.
- Seta botjha konopo
- Boema-kepe ba USB console
- Li-switches tsa DIP bakeng sa Turbo Ring, Ring Master, le Ring Coupler
- Sesepa sa motheo
- Li-terminal block tsa 4-pin bakeng sa kenyelletso ea dijithale le ho kenya matla 2
- Li-terminal block tsa 4-pin bakeng sa tlhahiso ea relay le ho kenya matla 1
- Letšoao la LED la boema-kepe ba 100BaseFX: 13, 14
- Boema-kepe ba 100BaseFX (mofuta oa SC), boema-kepe ba 13, 14
- Boema-kepe ba 10/100BaseT(X), boema-kepe ba 1 ho isa ho 12
- 100BaseT(X) Letšoao la LED
- 10BaseT(X) Letšoao la LED
- Boemo ba sistimi ea LED:
STATE LED pontshi
Letšoao la LED la PWR1
Letšoao la LED la PWR2
PHOSO EA LED letšoao
Letšoao la LED la MSTR / HEAD
Letšoao la LED la CPLR/TAIL - Kou ea polokelo ea USB
- Letšoao la LED la G1 ho ea ho G4
- 10/100/1000BaseT(X) kapa
100/1000BaseSFP combo port, boema-kepe ba G1 ho isa G4 - Lebitso la Mohlala
- Sekoti bakeng sa Wall Mounting Kit
- DIN-Rail Kit
Mounting Dimensions
DIN-Rail Ho hloa
Setsi sa tšepe sa DIN-rail se behiloe karolong e ka morao ea EDS-518E ha u e ntša ka lebokoseng. Hloma EDS-518E holim'a liporo tse se nang kutu tse lumellanang le maemo a EN 60715.
Ho kenya
MOHATO 1: Kenya molomo o ka holimo oa seporo sa DIN ka har'a khiti ea ho hlomamisoa ea DIN-rail.
MOHATO 2: Tobetsa letoto la EDS-518E le lebile seporong sa DIN ho fihlela se fihla sebakeng.
Ho tloswa
MOHATO 1: Hula latch holim'a khiti e ntseng e phahama ka screwdriver.
MOHATO 2 & 3: Hula EDS-518E pele hanyane ebe u e phahamisa ho e tlosa seporong sa DIN.
TLHOKOMELO
- Lisebelisoa tsena ke lisebelisoa tsa mofuta o bulehileng tse lokelang ho kenngoa ka har'a sebaka se kampetsoeng se nang le sekoahelo sa sesebelisoa se tlosoang kapa lemati le loketseng tikoloho sebakeng seo.
- Thepa ena e loketse ho sebelisoa ho Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C, le D kapa libakeng tse seng kotsi feela.
Ho Beha Lebota (Ha ho boikhethelo)
Bakeng sa lits'ebetso tse ling, u tla fumana ho le bonolo ho beha Moxa EDS-518E leboteng, joalo ka ha ho bonts'itsoe lipapisong tse latelang:
- MOHATO 1: Tlosa aluminium ea DIN-rail attachment plate ho tloha karolong e ka morao ea EDS-518E, ebe u hokela lipoleiti tsa lebota ka li-screws tsa M3, joalokaha ho bontšitsoe setšoantšong se ka ho le letona.
- MOHATO 2: Ho beha letoto la EDS-518E leboteng ho hloka li-screw tse 4. Sebelisa EDS-518E, e nang le lipoleiti tsa lebota tse khomaretsoeng, e le tataiso ea ho tšoaea libaka tse nepahetseng tsa li-screw tse 4. Lihlooho tsa li-screws li lokela ho ba ka tlase ho 6.0 mm ka bophara, 'me li-shafts li be ka tlase ho 3.5 mm ka bophara, joalokaha ho bontšitsoe setšoantšong se ka ho le letona.
HLOKOMELA: Pele o tiisa likurufu leboteng, etsa bonnete ba hore hlooho ea sekurufu le boholo ba shank li loketse ka ho kenya screw ho e 'ngoe ea li-apertures tse bōpehileng joaloka lesoba la lipoleiti tsa lebota.
Se ke oa phurula li-screw ka hohle-hohle-tlohela limilimithara tse ka bang 2 ho lumella sebaka sa ho thellela lerako la lebota pakeng tsa lebota le likurufu.
MOHATO 3: Hang ha li-screw li tsitsitse leboteng, kenya li-screw lihlooho tse 'nè likarolong tse pharaletseng tsa li-apertures tse bōpehileng joaloka senotlolo, ebe u thellela EDS-518E tlase, joalokaha ho bontšitsoe setšoantšong se ka ho le letona. Tiisa li-screws tse 'nè bakeng sa botsitso bo boholo.
TLHOKOMELO
- KOTSI EA HO PHAHAMA—Se ke oa hakolla lisebelisoa ntle le haeba motlakase o tlositsoe kapa sebaka seo ho tsejoa hore ha se kotsi.
- KOTSI EA HO PHAHLOA—Ho nkela karolo efe kapa efe sebaka ho ka sitisa ho nepahala ha Sehlopha sa I, Karolo ea 2.
- HO HLAHALA KA HO HLAHALA KA LIKHEMIKALI TSE LING HO KA HANYETSA MESEBETSI EA TIISO EA LINTHO TSE SEBELISANG TŠEBELETSO EA RELAY.
Litlhoko tsa Wiring
TLHOKOMELO
Se ke oa hakolla li-module kapa lithapo ntle le haeba motlakase o tingoe kapa sebaka seo ho tsejoa hore ha se kotsi. Lisebelisoa li ka hokahanngoa feela le phallo ea motlakasetage bonts'itsoeng letlapeng la mofuta. Lisebelisoa li etselitsoe ho sebetsa ka Safety Extra-Low Voltage. Ka hona, li ka 'na tsa kopanngoa feela le matla a phepelotaglikhokahano tsa e le khokahanong ea lets'oao le Safety Extra-Low Voltages (SELV) ho latela IEC950/ EN60950/ VDE0805.
TLHOKOMELO
Yuniti ena ke mofuta o hahelletsoeng ka hare. Ha yuniti e kentsoe sesebelisoa se seng, lisebelisoa tse koaletsoeng yuniti li tlameha ho latela melaoana ea sekoaelo sa mollo IEC 60950/EN60950 (kapa molao o tšoanang).
TLHOKOMELO
Tšireletseho Pele!
Etsa bonnete ba hore o khaola thapo ea motlakase pele o kenya le/kapa o kenya mohala oa hau oa EDS-518E.
Bala boholo bo ka khonehang terateng e 'ngoe le e 'ngoe ea motlakase le terata e tloaelehileng. Ela hloko likhoutu tsohle tsa motlakase tse laelang boholo ba hajoale bo lumelletsoeng bakeng sa saese ka 'ngoe ea terata.
Haeba hona joale ho feta litekanyetso tse phahameng, wiring e ka chesa haholo, ea baka tšenyo e kholo ho thepa ea hau.
Ka kopo bala le ho latela litataiso tsena:
- Sebelisa litsela tse arohaneng ho tsamaisa lithapo bakeng sa motlakase le lisebelisoa. Haeba lithapo tsa motlakase le litsela tsa lisebelisoa li tlameha ho tšela, etsa bonnete ba hore lithapo li perpendicular sebakeng sa mateano.
HLOKOMELA: Se ke oa kenya mehala ea mats'oao kapa likhokahano le likhoele tsa motlakase ka kotopong e ts'oanang ea terata. Ho qoba tšitiso, mehala e nang le litšobotsi tse fapaneng tsa matšoao e lokela ho tsamaisoa ka thoko - U ka sebelisa mofuta oa lets'oao le fetisoang ka mohala ho fumana hore na ke lithapo life tse lokelang ho aroloa. Molao oa monoana ke hore likhoele tse nang le litšobotsi tse tšoanang tsa motlakase li ka kopanngoa hammoho
- U lokela ho arola lithapo tsa ho kenya letsoho ho tloha ho li-output wiring
- Re u eletsa hore u ngole mohala ho lisebelisoa tsohle tsa sistimi.
Ho theola Moxa EDS-518E
Ho beha fatše le ho tsamaisa terata ho thusa ho fokotsa litlamorao tsa lerata ka lebaka la tšitiso ea motlakase (EMI). Matha khokahanyo ea fatše ho tloha ho sekoti sa fatše ho ea sebakeng se fatše pele u kopanya lisebelisoa.
TLHOKOMELO
Sehlahisoa sena se reretsoe ho behoa sebakeng se hloekisitsoeng hantle se kang setsi sa tšepe.
Ho thaepa Lebitso la Relay
Letoto la EDS-518E le na le tlhahiso e le 'ngoe ea relay. Lebitso lena la relay le sebelisa likhokahano tse peli tsa "terminal block" ho phanele e kaholimo ea EDS-518E. Sheba karolo e latelang bakeng sa litaelo tse qaqileng mabapi le mokhoa oa ho hokela lithapo ho sehokelo sa terminal block, le mokhoa oa ho hokela sehokelo sa terminal block ho receptor block. Karolong ena, re bonts'a moelelo oa likhokahano tse peli tse sebelisoang ho hokahanya khokahano ea phepelo.
MOLATO:
Likhokahano tse peli tsa sehokelo sa li-terminal block tsa 4-pin li sebelisetsoa ho bona liketsahalo tse hlophisitsoeng ke basebelisi. Lithapo tse peli tse khomaretsoeng ho li-contacts tsa phoso li theha potoloho e bulehileng ha ketsahalo e hlophisitsoeng ke mosebedisi e qala. Haeba ketsahalo e hlophisitsoeng ke mosebelisi e sa etsahale, potoloho ea phoso e lula e koetsoe.
Ho Kenya Mehala ea Matla a sa Hlokehang
EDS-518E e na le lihlopha tse peli tsa lisebelisoa tsa matla-ho kenya matla 1 le ho kenya matla 2. Ka holimo. view Lihokelo tsa li-terminal block li bonts'itsoe mona.
- MOHATO 1: Kenya lithapo tse mpe/tse ntle tsa DC ho li-terminals tsa V-/V+, ka ho latellana.
- MOHATO 2: Ho thibela lithapo tsa DC hore li se ke tsa theoha, sebelisa screwdriver e nyane e nang le lehare ho tiisa terata.amp dikurufu ka pele ho sehokedi sa boloko ba theminale.
- MOHATO 3: Kenya li-prong tsa sehokelo sa li-terminal block tsa polasetiki ka har'a li-receptor block, tse fumanehang ho
Setšoantšo sa EDS-518E
Ho thaepa Lisebelisoa tsa Dijithale
EDS-518E e na le mochine o le mong oa digital (DI). DI e na le likhokahano tse peli tsa sehokelo sa li-terminal block tsa 4-pin holim'a phanele e kaholimo ea EDS-518E, e sebelisetsoang ho kenya likarolo tse peli tsa DC. Bokaholimo view Lihokelo tsa li-terminal block li bonts'itsoe mona.
- MOHATO 1: Kenya lithapo tse mpe (fatše)/positive DI ho litheminale tsa ┴/I, ka ho latellana.
- MOHATO 2: Ho thibela lithapo tsa DI hore li se ke tsa thella, sebelisa screwdriver e nyane ea lehare ho tiisa terata.amp dikurufu ka pele ho sehokedi sa boloko ba theminale.
- MOHATO 3: Kenya li-prong tsa sehokelo sa li-terminal block tsa polasetiki ho terminal block receptor, e fumanehang holim'a phanele e kaholimo ea EDS-518E.
Likhokahano tsa Puisano
Sesebelisoa se seng le se seng sa EDS-518E se na le mefuta e 4 ea likou tsa puisano:
- 1 USB console port (sehokelo sa mofuta oa B)
- 1 kou ea polokelo ea USB (sehokelo sa mofuta oa A)
- 14 10/100BaseTX Ethernet ports (EDS-518E-4GTXSFP series) kapa 12 10/100BaseT(X) Ethernet ports hammoho le 2 100BaseFX (SC/ST-type connector) fiber ports (EDS-518E-MM-SC-4GTXSFP/
EDS-518E-SS-SC-4GTXSFP/EDS-518E-MM-ST-4GTXSFP) - Likou tse 4 tsa li-combo tsa Gigabit Ethernet: 4 10/100/1000BaseT(X) le likou tse 4 100/1000BaseSFP
Khokahano ea Console ea USB
EDS-518E e na le kou e le 'ngoe ea USB console (sehokelo sa mofuta oa B) se karolong e ka holimo. Sebelisa thapo ea USB (e fanoeng sephutheloaneng sa sehlahisoa) ho hokela kou ea khomphutha ea EDS-518E boema-kepeng ba USB ba PC ea hau ebe o kenya mokhanni oa USB ho PC. Joale u ka sebelisa lenaneo la "console terminal", joalo ka Moxa PCm Terminal Emulator, ho fihlella ts'ebeliso ea tlhophiso ea khomphutha ea EDS-518E.
Boema-kepe ba USB Console (Mofuta oa Sehokelo sa B) Li-pinouts
| Pin | Tlhaloso |
| 1 | D– (Boitsebiso–) |
| 2 | VCC (+5V) |
| 3 | D+ (Boitsebiso+) |
| 4 | GND (Fatše) |
Khokahano ea polokelo ea USB
EDS-518E e na le kou e le 'ngoe ea polokelo ea USB (sehokelo sa mofuta oa A) phanele e ka pele. Sebelisa setlhophiso sa "backup" sa Moxa ABC-02-USB-T ho hokela boema-kepe ba USB ba EDS-518E bakeng sa bekapo ea tlhophiso, ntlafatso ea firmware, kapa log log. file bekapo.
Kemiso ea ABC-02-USB
Hokela ABC-02-USB koung ea polokelo ea USB ea Moxa EDS-518E. ABC-02-USB e ka ts'ireletsoa leboteng ka sekoti sa M4.
Boema-kepe ba polokelo ea USB (Mofuta oa Sehokelo) Li-pinouts
| Pin | Tlhaloso |
| 1 | VCC (+5V) |
| 2 | D– (Boitsebiso–) |
| 3 | D+ (Boitsebiso+) |
| 4 | GND (Fatše) |
10/100BaseT(X) Khokelo ea Ethernet Port
Likou tsa 10/100BaseT(X) tse karolong e ka pele ea EDS-518E li sebelisoa ho hokela lisebelisoa tse sebetsang ka Ethernet. Basebelisi ba bangata ba tla khetha ho lokisa likou tsena bakeng sa Auto MDI/MDI-X mode, moo pinouts ea koung e fetoloang ka bo eona ho latela mofuta oa thapo ea Ethernet e sebelisitsoeng (ho otloloha kapa ho tšela), le mofuta oa sesebelisoa.
(Mofuta oa NIC kapa HUB/Switch-mofuta) o hoketsoe boema-kepeng.
Ho tse latelang, re fana ka li-pinouts bakeng sa li-port tsa MDI (NIC-type) le MDI-X (HUB/Switch-type). Hape re fana ka litšoantšo tsa lithapo tsa lithapo bakeng sa likhoele tse otlolohileng le tse tšelang Ethernet.
10/100Base T(x) RJ45 Pinouts
MDI Port Pinouts
| Pin | Letshwao |
| 1 | Tx + |
| 2 | TX- |
| 3 | Rx + |
| 6 | Rx- |
MDI X Port Pinouts
| Pin | Letshwao |
| 1 | Rx + |
| 2 | Rx- |
| 3 | Tx + |
| 6 | TX- |
8-phini RJ45
RJ45 (8-pin) ho ea ho RJ45 (8-pin) Ho Otloloha ka Lithapo tsa Cable
RJ45 (8-pin) ho ea ho RJ45 (8-pin) Cross-Over Cable Wiring
100BaseFx Ethernet Port Connection
Mohopolo o ka morao ho boema-kepe ba SC/ST le thapo o hlakile. Ha re re u hokahanya lisebelisoa tsa I le II. Ho fapana le matšoao a motlakase, matšoao a optical ha a hloke potoloho e le hore a fetise data. Ka lebaka leo, e 'ngoe ea mela ea optical e sebelisetsoa ho fetisetsa data ho tloha mochine oa I ho ea ho sesebelisoa sa II,' me mohala o mong oa optical o sebelisoa ho fetisetsa data ho tloha mochine oa II ho ea ho sesebelisoa sa I, bakeng sa phetisetso e feletseng ea duplex.
Sohle seo u hlokang ho se hopola ke ho hokahanya boema-kepe ba Tx (phetisetsa) sesebelisoa sa I ho boema-kepe ba Rx (amohela) sesebelisoa sa II, le boema-kepe ba Rx (amohela) sesebelisoa sa I ho sekepe sa Tx (ho fetisa) sa sesebelisoa II. Haeba u iketsetsa thapo, re fana ka maikutlo a hore u ngole mahlakore a mabeli a mola o le mong ka litlhaku tse tšoanang (A-to-A le B-to-B, joalokaha ho bontšoa ke papiso e latelang, kapa A1-to-A2 le B1 -ho-B2).
SC-Port pinouts
SC-Port ho ya SC-Port Cable Wiring
TLHOKOMELO
Ena ke sehlahisoa sa Class 1 Laser/LED. Ho thibela tšenyo ea mahlo a hau, u se ke ua sheba ka ho toba lebone la laser.
1000BaseT Ethernet Port Connection
Lintlha tsa 1000BaseT li fetisoa ka lipara tse fapaneng tsa TRD+/- holim'a lithapo tsa koporo.
MDI/MDI-X Port pinouts
| Pin | Letshwao |
| 1 | TRD(0)+ |
| 2 | TRD(0)- |
| 3 | TRD(1)+ |
| 4 | TRD(2)+ |
| 5 | TRD(2)- |
| 6 | TRD(1)- |
| 7 | TRD(3)+ |
| 8 | TRD(3)- |
100/1000BaseSFP (mini-GBIC) Fiber Port
Li-port tsa Gigabit Ethernet fiber ho EDS-518E ke 100 / 1000BaseSFP fiber ports, tse hlokang ho sebelisa 100M kapa 1G mini-GBIC fiber transceivers ho sebetsa hantle. Moxa e fana ka khetho e felletseng ea mefuta ea transceiver bakeng sa litlhoko tse fapaneng tsa sebaka.
Mohopolo o ka morao ho boema-kepe ba LC le cable o otlolohile. Ha re re u hokahanya lisebelisoa tsa I le II; khahlanong le matšoao a motlakase, matšoao a optical ha a hloke potoloho e le hore a fetise data. Ka lebaka leo, e 'ngoe ea mela ea optical e sebelisetsoa ho fetisetsa data ho tloha mochine oa I ho ea ho sesebelisoa sa II,' me mohala o mong oa optical o sebelisoa ho fetisetsa data ho tloha mochine oa II ho ea ho sesebelisoa sa I, bakeng sa phetisetso e feletseng ea duplex.
Hopola ho hokela boema-kepe ba Tx (phetisetsa) sesebelisoa sa I ho boema-kepe ba Rx (fumana) ea sesebelisoa II, le boema-kepe ba Rx (amohela) sesebelisoa sa I boema-kepeng ba Tx (ho fetisa) ea sesebelisoa II. Haeba u iketsetsa thapo, re fana ka maikutlo a hore u ngole mahlakore a mabeli a mola o le mong ka litlhaku tse tšoanang (A-to-A le B-to-B, joalokaha ho bontšitsoe ka tlase, kapa A1-to-A2 le B1-to-B2 ).
LC-Port pinouts
LC-Port ho ea LC-Port Cable Wiring
TLHOKOMELO
Ena ke sehlahisoa sa Class 1 Laser/LED. Ho qoba ho baka tšenyo e tebileng mahlong a hau, u se ke ua sheba ka ho toba Beam ea Laser.
Seta Botjha Konopo
Konopo ea ho Seta Botjha e tshehetsa ditshebetso tse pedi. E 'ngoe ke ho seta bocha switch ea Ethernet ho li-setting tsa kamehla tsa feme ka ho tobetsa le ho ts'oara konopo ea Reset bakeng sa metsotsoana e 5. Sebelisa ntho e nchocho, joalo ka sekotwana sa pampiri se otlolohileng kapa toothpick, ho hatella konopo ea Reset. Sena se tla etsa hore STATE LED e panye hang ka motsotsoana. Kamora ho hatella konopo bakeng sa metsotsoana e 5 e tsoelang pele, STATE LED e tla qala ho panya ka potlako, e bonts'a hore litlhophiso tsa kamehla tsa feme li kentsoe 'me u ka lokolla konopo ea reset.
Ha ABC-02-USB e hoketsoe ho switch ea EDS-518E Ethernet, konopo ea reset e lumella tlhophiso e potlakileng le ho boloka lintlha tsa morao-rao. files ho ABC-02-USB. Tobetsa konopo ea Reset ka holim'a EDS-518E; switch ea Ethernet e tla qala ho boloka tlhophiso ea sistimi ea hajoale files le lintlha tsa liketsahalo ho ABC-02-USB.
HLOKOMELA SE KE UA tima switch ea Ethernet ha u kenya li-setting tsa kamehla.
Turbo Ring DIP Switch Settings
Li-switch tsa EDS-518E ke li-switch tsa Ethernet tse laoloang ke plug-and-play. Proprietary Turbo Ring protocol e ile ea ntlafatsoa ke Moxa ho fana ka ts'episo e ntle ea marang-rang le nako ea ho hlaphoheloa kapele. Nako ea ho hlaphoheloa ea Moxa Turbo Ring e ka tlase ho 300 ms (Turbo Ring) kapa 20 ms (Turbo Ring V2) - ha e bapisoa le metsotso e 3 ho isa ho e 5 ea ho hlaphoheloa ha li-switches tsa khoebo - e fokotsa tahlehelo e ka bakoang ke ho hlōleha ha marang-rang sebakeng sa indasteri. .
Liphetoho tse 4 tsa DIP tse fumanehang karolong e ka holimo ea EDS-518E li ka sebelisoa ho lokisa Turbo Ring habonolo feela ka metsotsoana e seng mekae. Haeba u sa batle ho sebelisa sesebelisoa sa DIP sa hardware ho lokisa Turbo Ring, u ka sebelisa a web sebatli, Telnet, kapa serial console ho tima li-switches tsa DIP.
HLOKOMELA Sheba karolo ea Ring ea Turbo ho Buka ea Mosebelisi ea Khaello ea Lipuisano bakeng sa lintlha tse qaqileng mabapi le litlhophiso le tšebeliso ea Turbo Ring le Turbo Ring V2.
Liphetoho tsa EDS-518E Series DIP
Tlhophiso ea kamehla bakeng sa Switch ka 'ngoe ea DIP e TIMA. Tafole e latelang e hlalosa phello ea ho beha DIP Switjha ho boemo ba ON.
"Turbo Ring" DIP Switch Settings
| KOTSA 1 | KOTSA 2 | KOTSA 3 | KOTSA 4 |
| E boloketsoe | ON: E nolofalletsa sena | ON: E nolofalletsa ho | ON: E kenya tshebetsong |
| tshebediso ya nako e tlang. | EDS joalo ka Ring | default "Ring | DIP switjha 2 le |
| Monghadi. | Ho kopanya” le | 3 ho lokisa | |
| “Ho Kopana ha Ring | "Turbo Ring" | ||
| Laola" likou. | litlhophiso. | ||
| TLOA: EDS ena | TLOA: U se ke ua sebelisa | TLOA: Sesebelisoa sa DIP | |
| e ke ke ea ba | EDS ena e le eona | 1, 2, le 3 e tla ba | |
| Ring Master. | ring coupler. | bokooa. |
"Turbo Ring V2" DIP Switch Settings
| KOTSA 1 | KOTSA 2 | KOTSA 3 | KOTSA 4 |
| ON: E nolofalletsa boema-kepe ba kamehla ba "Ring Coupling (bekapo)" ha DIP switjha 3 e se e butswe. | ON: E nolofalletsa EDS ena joalo ka Ring Master. | ON: E nolofalletsa boema-kepe ba kamehla ba "Ring Coupling". | ON: E kenya tšebetsong switch ea DIP 1, 2,
le 3 ho lokisa litlhophiso tsa "Turbo Ring V2". |
| TLOA: E nolofalletsa kou ea "Ring Coupling (ea mantlha)" ea kamehla ha DIP switch 3 e se e ntse e le teng
nolofalitsoe. |
TLOA: EDS ena
e ke ke ea e-ba Ring Master. |
TLOA: Se ke oa sebelisa EDS ena joalo ka ring coupler. | TLOA: DIP
li-switches 1, 2, le 3 li tla tingoa. |
HLOKOMELA U tlameha ho nolofalletsa ts'ebetso ea Turbo Ring pele u sebelisa sesebelisoa sa DIP ho kenya tšebetsong mesebetsi ea Master le Coupler. \
HLOKOMELA Haeba u sa lumelle leha e le efe ea li-switch tsa EDS-518E hore e be Ring Master, protocol ea Turbo Ring e tla ikhethela letoto la EDS-518E ka lethathamo le lenyenyane la liaterese tsa MAC hore e be Ring Master. Haeba ka phoso u nolofalitse letoto le fetang le le leng la EDS-518E hore e be Ring Master, li-switch tsena tsa EDS-518E li tla buisana ka bohona ho fumana hore na ke ofe eo e tla ba Ring Master.
Lipontšo tsa LED
Karolo e ka pele ea Moxa EDS-518E e na le matšoao a 'maloa a LED. Mosebetsi oa LED ka 'ngoe o hlalosoa tafoleng e latelang:
| LED | Mmala | Boemo | Tlhaloso |
|
TŠEBELETSO |
Botala |
On | Sistimi e fetisitse tlhahlobo ea ho itlhahloba ha e qala 'me e se e loketse ho sebetsa. |
|
Ho panya |
• Hang ka motsotsoana o mong le o mong: Swichi e ntse e seta bocha.
• Hang ka metsotswana e meng le e meng e mmedi: ABC-02-USB e hoketsoe ho switjha. |
||
|
Khubedu |
On |
Sistimi e hlolehile ho itlhahloba ha e qala.
• Ho hloleha ha Teko ea RAM / Boitsebiso ba Tsamaiso. Bala Fail / Fetola Phoso ea Pele / Phoso ea PTP PHY. (+ MSTR e tala e bonesitsoe: HW FAIL) • FW Checksum Fail / Uncompress Fail. (+ Green Coupler e bonesitsoe: SW FAIL) |
|
|
PHOTO |
Khubedu |
On |
1. Lebitso la lets'oao le bulehile.
2. ABC Loading / Saving Fail. 3. Boema-kepe bo a koaloa hobane lipakete tsa ingress multicast le khaso li feta moeli oa sekhahla sa ho kena. 4. Khokahano e fosahetseng ea loop ho switjha e le 'ngoe. 5. Khokelo e sa sebetseng ea Ring port. |
| LED | Mmala | Boemo | Tlhaloso |
|
EA-1-PWR |
Amber |
On | Matla a ntse a fanoa mojulung o moholo oa motlakase oa PWR1. |
| E tima | Matla ha a kenngoe mojulung o moholo oa motlakase oa PWR1. | ||
|
EA-2-PWR |
Amber |
On | Matla a ntse a fanoa mojulung o moholo oa motlakase oa PWR2. |
| E tima | Matla ha a kenngoe mojulung o moholo oa motlakase oa PWR2. | ||
|
MSTR/ HLOOHO |
Botala |
On |
1. Sesebelisoa se behiloe e le Monghali oa Ring ea Turbo, kapa e le Hlooho ea Chain ea Turbo.
2. POST HW Fail (+Stat on and Fault panya). |
|
Ho panya |
1. Phetoho e fetohile Monghali oa Ring oa Turbo Ring.
2. Phetoho e fetohile Hlooho ea Turbo Chain, ka mor'a hore Ring ea Turbo kapa Turbo Chain e theohe. 3. Sesebelisoa se behiloe joalo ka Turbo Chain's Member le koung ea ketane e tsamaellanang e theohile. |
||
|
E tima |
1. Phetoho ha se Mong'a Ring ena ea Turbo.
2. Switjha ena e behilwe e le Setho sa Turbo Chain. |
||
|
CPLR/ MOELA |
Botala |
On |
1. Ts'ebetso ea ho kopanya ea switjha e nolofalitsoe ho theha tsela ea ho boloka.
2. Phetoho e behiloe e le Mohatla oa Turbo Chain. 3. POST SW Fail (+Stat on and Fault ho panya) |
|
Ho panya |
1. Turbo Chain e theohile.
2. Sesebelisoa se behiloe e le Setho sa Turbo Chain mme boema-ketane bo tsamaisanang le bona bo theohile. |
||
|
E tima |
1. Sesebelisoa sena se holofalitse ts'ebetso ea ho kopanya.
2. Switjha ena e behilwe e le Setho sa Turbo Chain. |
||
| PHOSO + MSTR/HLOOHO +
CPLR/MOHATLA |
Rotate Ho panya
Ka tatellano |
ABC-02-USB e reka kantle ho naha files. |
|
| STATE + FAULT + MSTR/HLOOHO +
CPLR/MOHATLA |
Ho panya |
Switch e ntse e sibolloa/e fumaneha ke MXview (habeli motsotsoana). |
|
| 10M (TP) |
Botala |
On | Sehokelo sa TP port sa 10 Mbps se ea sebetsa. |
| Ho panya | Lintlha li fetisoa ho 10 Mbps. | ||
| E tima | Sehokelo sa TP port sa 10 Mbps ha se sebetse. | ||
| 100M (TP/
E tsitsitse FX) |
Botala |
On | Sehokelo sa TP/Fixed FX sa 100 Mbps se ea sebetsa. |
| Ho panya | Lintlha li fetisoa ho 100 Mbps. | ||
| E tima | Sehokelo sa TP/Fixed FX sa 100 Mbps se
e sa sebetseng. |
||
| LED | Mmala | Boemo | Tlhaloso |
| 100M | On | TP/SFP combo port ea 100 Mbps sehokelo ke | |
| (TP/ | mafolofolo. | ||
| SFP | Amber | Ho panya | Lintlha li fetisoa ho 100 Mbps. |
| combo | E tima | TP/SFP combo port ea 100 Mbps sehokelo ke | |
| likou) | e sa sebetseng. | ||
| 1000M | On | TP/SFP combo port ea 1000 Mbps sehokelo ke | |
| (TP/ | mafolofolo. | ||
| SFP | Botala | Ho panya | Lintlha li fetisoa ho 1000 Mbps. |
| combo | E tima | TP/SFP combo port ea 1000 Mbps sehokelo ke | |
| boema-kepe) | e sa sebetseng. |
Litlhaloso
| Thekenoloji | |
| Litekanyetso | IEEE 802.3 bakeng sa 10BaseT
IEEE 802.3u bakeng sa 100BaseT(X) le 100BaseFX IEEE 802.3ab bakeng sa 1000BaseT(X) IEEE 802.3z bakeng sa 1000BaseX IEEE 802.3x bakeng sa Taolo ea Phallo IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1s bakeng sa Multiple Spanning Tree Protocol IEEE 802.1Q bakeng sa VLAN Tagho tsofala IEEE 802.1p bakeng sa Sehlopha sa Tshebeletso IEEE 802.1x bakeng sa Botiisetso IEEE 802.3ad bakeng sa Trunk ea Port e nang le LACP |
| Melao-motheo | IGMPv1/v2/v3, GMRP, GVRP, SNMPv1/v2c/v3,
DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog, EtherNet/IP, PROFINET, Modbus/TCP, SNMP Inform, LLDP, IEEE 1588 v2 PTP, IPv6, Seva/Moreki oa NTP |
| MIB | MIB-II, Ethernet-Joaloka MIB, P-BRIDGE MIB,
Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Sehlopha sa 1, 2, 3, 9 |
| Taolo ea Phallo | IEEE 802.3x taolo ea phallo, taolo ea khatello ea mokokotlo |
| Sehokedi | |
| RJ45 Boema-kepe | EDS-518E-MM-ST/SC-4GTXSFP le EDS-518E-SS-SC-4GTXSFP:
10/100BaseT(X) likou: 12 10/100/1000BaseT(X) likou: 4 EDS-518E-4GTXSFP: 10/100BaseT(X) likou: 14 10/100/1000BaseT(X) likou: 4 |
| Likepe tsa Fiber | EDS-518E-MM-ST/SC-4GTXSFP le EDS-518E-SS-SC-4GTXSFP:
Likou tsa 100BaseFX (SC/ST sehokelo): 2 100/1000BaseSFP slots: 4 |
| Li-port tsa USB | USB console port (sehokelo sa mofuta oa B)
Kou ea polokelo ea USB (sehokelo sa mofuta oa A) |
| Konopo | Seta botjha konopo |
| Lipontšo tsa LED | PWR1, PWR2, FAULT, STATE, 10/100M, 100/1000M,
MSTR/HLOOHO, CPLR/MOHATLA |
| Lebitso la Alamo | 1 tlhahiso ea relay e nang le bokhoni ba hajoale ba 1 A
@24 VDC |
| Input ea dijithale | Kenyeletso e le 1 e nang le mobu o ts'oanang, empa e arohane ka motlakase ho lisebelisoa tsa elektroniki.
+13 ho ea ho +30 V bakeng sa boemo "1" -30 ho +3 V bakeng sa boemo "0" Max. hona joale ho kenya: 8 mA |
| Matla | |
| Keletso Voltage | 12/24/48/-48 VDC, lintho tse kenang tse peli tse sa hlokahaleng |
| Kenya Hona Jwale | EDS-518E-4GTXSFP: 0.37 A @ 24 V
EDS-518E-MM-ST/SC-4GTXSFP: 0.41 A @ 24 V EDS-518E-SS-SC-4GTXSFP: 0.41 A @ 24 V |
| Khokahano | Li-terminals tse 2 tse ka tlosoang tse 4 |
| Ho Tlameha Hona Joale
Tshireletso |
Hlahisa |
| Khutlisa Ts'ireletso ea Polarity | Hlahisa |
| Litšobotsi Tsa 'Mele | |
| Matlo | Tšireletso ea tšepe, IP30 |
| Litekanyo | 94 x 135 x 138 mm (3.7 x 5.31 x 5.44 in) |
| Ho kenya | Ho hlomamisoa ka DIN-rail, ho kenya lebota (ka khiti ea boikhethelo) |
| Meeli ea Tikoloho | |
| Ho sebetsa
Mocheso |
-10 ho 60 ° C (14 ho 140 ° F) bakeng sa mehlala e tloaelehileng
-40 ho 75 ° C (-40 ho 167 ° F) bakeng sa mefuta ea -T |
| Polokelo
Mocheso |
-40 ho isa ho 85°C (-40 ho isa ho 185°F) |
| Leloko la Ambient
Mongobo |
5 ho isa ho 95% (ha e fokotsehe) |
| Bophahamo | Ho fihlela ho 2000 m |
| Tlhokomeliso: Ka kopo ikopanye le Moxa haeba o hloka hore lihlahisoa tse netefalitsoeng li tla sebetsa
hantle libakeng tse phahameng. |
|
| Litumello tsa Taolo | |
| Polokeho | UL 508 |
| EMI | FCC Karolo ea 15 Karolo ea B Sehlopha sa A, EN 55022 Sehlopha sa A |
| EMS | EN 61000-4-2 (ESD) Mohato 4, EN 61000-4-3 (RS)
Mohato 3, EN 61000-4-4 (EFT) Mohato 4, EN 61000-4-5 (Surge) Level 4, EN 61000-4-6 (CS) Mohato 3, EN 61000-4-8 |
| Ho tshoha | Tlhaloso: IEC 60068-2-27 |
| Hoetla mahala | Tlhaloso: IEC 60068-2-32 |
| Ho thothomela | Tlhaloso: IEC 60068-2-6 |
| Tiisetso | |
| Tiisetso | 5 lilemo |
Litokomane / Lisebelisoa
 |
MOXA EDS-518E Series Layer 2 Managed Ethernet Switch [pdf] Tlhophiso Tataiso EDS-518E Series, Layer 2 Managed Ethernet Switch, EDS-518E Series Layer 2 Managed Ethernet Switch |
