MIDAS M32 LIVE Digital Console bakeng sa Live le Studio

Tlhahisoleseding ya Sehlahiswa

Litlhaloso

• Mohlala: M32 PHELELA
• Mofuta: Digital Console bakeng sa Live le Studio
• Likanale tsa ho kenya: 40
• Midas PRO Microphone Preamplifiers: 32
• Kopanya Libese:25
• Live Multitrack Recording
• Mofuta: 6.0

Litaelo tsa Tšebeliso ea Sehlahisoa

Litaelo tsa Tšireletseho
Ho bohlokoa ho latela litaelo tsa polokeho tse fanoeng bukeng ea litaelo ho netefatsa ts'ebetso e bolokehileng ea sesebelisoa. Lintlha tse ling tsa bohlokoa tsa polokeho li kenyelletsa:

• Qoba ho pepesehela voltage
• Qoba ho kopana le pula le mongobo
• Se ke oa leka ho sebeletsa sesebelisoa ka bouena
• Sireletsa thapo ea motlakase hore e se senyehe
• Sebelisa lisebelisoa tse khothalelitsoeng feela
• Etsa bonnete ba hore ho na le motheo o nepahetseng le likhokahano tsa motlakase

Ho seta le ho Kenya
Pele o sebelisa M32 LIVE, etsa bonnete ba hore:

1. Bala bukana e felletseng ea mosebelisi
2. Etsa bonnete ba hore likarolo tsohle li kenyelelitsoe ka har'a sephutheloana
3. Beha console sebakeng se tsitsitseng
4. Hokela motlakase ho latela litataiso tsa polokeho

Litaelo tsa Ts'ebetso
Ho tsamaisa M32 LIVE

1. Kenya matla ho sesebelisoa u sebelisa konopo ea matla e khethiloeng
2. Fetola maemo a ho kenya o sebelisa preamplifiers
3. Sebelisa mefuta ea libese bakeng sa ho tsamaisa molumo
4. Kenya letsoho ho rekota ha multitrack ha ho hlokahala

LBH

P: A na nka sebelisa M32 LIVE bakeng sa litšoantšiso le lirekoto tsa studio?
A: E, M32 LIVE e etselitsoe tšebeliso e phelang le ea studio, e fana ka ts'ebetso e fapaneng bakeng sa litlhophiso tse fapaneng.

P: M32 LIVE e tšehetsa liteishene tse kae tsa ho kenya?
A: M32 LIVE e na le liteishene tse 40 tsa ho kenya, ho fana ka ample dikgetho bakeng sa ho kenya mamelwang.

P: Na ho bolokehile ho sebelisa M32 LIVE nakong ea sefefo?
A: Ho kgothaletswa ho ntsha sesebediswa nakong ya sefefo kapa ha se sa sebediswa ho thibela tshenyo e ka bang teng ka lebaka la ho phahama ha matla.

Litaelo tsa Bohlokoa tsa Tšireletso

• Litheminale tse tšoailoeng ka letšoao lena li na le motlakase oa boholo bo lekaneng ho beha kotsi ea ho tsukutloa ke motlakase.
• Sebelisa feela lithapo tsa libui tsa boleng bo holimo tse nang le ¼” TS kapa li-twist-locking plug tse kentsoeng esale pele. Ts'ebetso e 'ngoe kapa liphetoho tse ling kaofela li lokela ho etsoa feela ke basebetsi ba tšoanelehang.
• Letšoao lena, hohle moo le hlahang teng, le u hlokomelisa ka boteng ba voltage ka hare ho sebaka se kampetsoeng - voltage ka ba ho lekaneng ho etsa kotsi ea ho makala.
• Letšoao lena, kae kapa kae moo le hlahang teng, le u lemosa ka litaelo tsa bohlokoa tsa ts'ebetso le tlhokomelo libukeng tse tsamaeang le sehlooho sena. Ka kopo bala bukana ea tataiso.
• Tlhokomeliso
  • Ho fokotsa kotsi ea ts'oaetso ea motlakase, u se ke ua tlosa sekoahelo se ka holimo (kapa karolo e ka morao).
  • Ha ho likarolo tse sebelisoang ke motho kahare. Sheba litšebeletso ho basebetsi ba tšoanelehang.
  • Ho fokotsa kotsi ea mollo kapa ts'oaetso ea motlakase, u se ke ua pepesetsa sesebelisoa sena pula le mongobo.
  • Lisebelisoa ha li na ho pepesetsoa lino tse rothang kapa tse fafatsang 'me ha ho lintho tse tlatsitsoeng ka metsi, joalo ka li-vase, tse tla beoa holim'a sesebelisoa.
  • Litaelo tsena tsa litšebeletso ke tsa ho sebelisoa ke basebetsi ba nang le litsebo feela.
  • Ho fokotsa kotsi ea ts'oaetso ea motlakase u se ke ua etsa litšebeletso tse ling ntle le tse fanoeng litaelong tsa ts'ebetso.
• Litokiso li tlameha ho etsoa ke basebeletsi ba tšoanelehang ba litšebeletso.

Tlhokomediso
Ka kopo, sheba tlhahisoleseling e bokantle ba sebaka se ka tlase bakeng sa tlhaiso-leseling ea motlakase le polokeho pele o kenya kapa o sebelisa sesebelisoa.

1. Ka kopo bala le ho latela litaelo tsohle le litemoso.
2. Beha lisebelisoa hole le metsi (ntle le lihlahisoa tsa kantle).
3. Hloekisa feela ka lesela le omeletseng.
4. Se ke oa thibela menyetla ea moea. Se ke oa kenya sebakeng se koaletsoeng. Kenya feela ho latela litaelo tsa moetsi.
5. Sireletsa thapo ea motlakase hore e se senyehe, haholo li-plug le sokete ea lisebelisoa.
6. Se ke oa kenya haufi le mehloli efe kapa efe ea mocheso joalo ka li-radiator, lirejista tsa mocheso, litofo kapa lisebelisoa tse ling (ho kenyeletsoa amplifiers) tse hlahisang mocheso.
7. Se ke oa hlola sepheo sa polokeho ea polaka e entsoeng ka polarized kapa e thehileng fatše. Polarized plug e na le li-blade tse peli tse nang le bophara bo boholo ho feta bo bong (feela USA le Canada). Polaka ea mofuta oa fatše e na le li-blades tse peli le prong ea boraro ea motheo. Lehare le sephara kapa prong ea boraro li fanoe molemong oa polokeho ea hau. Haeba polaka e fanoeng e sa lekane sehokelong sa hau, ikopanye le ramotlakase bakeng sa ho nchafatsa sekheo sa khale.
8. Sireletsa thapo ea motlakase hore e se senyehe, haholo li-plug le sokete ea lisebelisoa.
9. Sebelisa feela lihokelo le lisebelisoa tse khothaletsoang ke moetsi.
10. Sebelisa feela likariki, litulo, li-tripods, masakaneng kapa litafole tse boletsoeng. E-ba hlokolosi ho thibela li-tip-overs ha u tsamaisa motsoako oa kariki / lisebelisoa.
11. Tlosa plug nakong ea lifefo, kapa haeba e sa sebelisoe nako e telele.
12. Sebelisa feela basebetsi ba tšoanelehang bakeng sa litšebeletso, haholo-holo ka mor'a tšenyo.
13. Lisebelisoa tse nang le terminal e sireletsang ea lefatše li tla hokeloa le sokete ea MAINS e nang le khokahano e sireletsang ea lefatše.
14. Moo polaka ea MAINS kapa sesebelisoa se kopanyang lisebelisoa e le sesebelisoa sa ho hakolla, sesebelisoa sa ho hakolla se tla lula se sebetsa habonolo.
15. Qoba ho kenya libakeng tse koaletsoeng joalo ka mekotla ea libuka.
16. Se ke oa beha mehloli ea malakabe e hlobotseng, joalo ka likerese tse bonesitsoeng, holim'a lisebelisoa.
17. Thempereichara ea ho sebetsa e fapana ho 5° ho isa ho 45°C (41° ho isa ho 113°F).

TLHOKOMELO MOLAO
Music Tribe ha e amohele molato bakeng sa tahlehelo efe kapa efe e ka hlahelwang ke motho ofe kapa ofe ya itshetlehileng ka botlalo kapa karolo e itseng hodima tlhaloso, senepe, kapa polelo efe kapa efe e teng mona. Litlhaloso tsa tekheniki, ponahalo le lintlha tse ling li ka fetoha ntle le tsebiso. Matshwao ohle a kgwebo ke thepa ya beng ba ona. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones le Coolaudio ke matšoao a khoebo kapa matšoao a ngolisitsoeng a Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2024 Litokelo tsohle boloketsoe.

TIISETSO MOEKETSI
Bakeng sa lipehelo le lipehelo tse sebetsang tsa tiisetso le lintlha tse ling mabapi le Tiisetso e Lekanyelitsoeng ea Music Tribe, ka kopo bona lintlha tse felletseng inthaneteng ho community.musictribe.com/support.

Bokaholimo ba taolo

1. TLHOKOMELISO / PREAMP - Fetola ea peleamp phaello bakeng sa kanale e khethiloeng e nang le taolo ea rotary ea GAIN. Tobetsa konopo ea 48 V ho kenya matla a phantom bakeng sa tšebeliso ea li-microphone tsa condenser ebe o tobetsa konopo ea to ho khutlisa karolo ea kanale. Metara ea LED e bonts'a boemo ba mocha o khethiloeng. Tobetsa konopo ea LOW CUT ebe u khetha makhetlo a batlang ho feta a phahameng ho tlosa maemo a sa batleheng. Tobetsa konopo ea VIEW konopo ho fumana lintlha tse qaqileng haholoanyane ho Main Display.
2. GATE/DYNAMICS – Tobetsa konopo ea GATE ho kenya heke ea lerata le ho lokisa monyako ka nepo. Tobetsa konopo ea COMP ho kenya compressor le ho lokisa moeli ka nepo. Ha boemo ba pontšo ka methareng ea LCD bo theoha ka tlase ho monyako oa heke e khethiloeng, heke ea lerata e tla khutsisa mocha. Ha boemo ba pontšo bo fihla moeling oa matla a khethiloeng, litlhōrō li tla hatelloa. Tobetsa ea VIEW konopo ho fumana lintlha tse qaqileng haholoanyane ho Main Display.
3. EQUALIZER - Tobetsa konopo ea EQ ho kenya karolo ena. Khetha e 'ngoe ea lihlopha tse' nè tsa maqhubu ka likonopo tsa LOW, LO MID, HI MID le HIGH. Tobetsa konopo ea MODE ho potoloha mefuta ea EQ e fumanehang. Matlafatsa kapa khaola maqhubu a khethiloeng ka taolo ea rotary ea GAIN. Khetha maqhubu a khethehileng a lokelang ho lokisoa le FREQUENCY rotary control 'me u lokise bandwidth ea maqhubu a khethiloeng ka taolo ea rotary ea WIDTH. Tobetsa ea VIEW konopo ho fumana lintlha tse qaqileng haholoanyane ho Main Display.
4. BESE E ROMELA – Ka potlako fetola libese tse romellang ka ho khetha e 'ngoe ea libanka tse' nè, e lateloa ke e 'ngoe ea li-control tse' nè tsa rotary. Tobetsa ea VIEW konopo ho fumana lintlha tse qaqileng haholoanyane ho Main Display.
5. MOTLATSI - Hokela memori ea kantle ho kenya liapdeite tsa firmware, ho kenya le ho boloka data ea show, le ho rekota lits'ebetso. Tobetsa ea VIEW konopo ho fumana lintlha tse qaqileng tsa Recorder ho Main Display.
6. BESE E Khōlō - Tobetsa likonopo tsa MONO CENTER kapa MAIN STEREO ho abela mocha libese tse kholo tsa mono kapa stereo. Ha MAIN STEREO (bese) e khethoa, PAN/BAL e ikamahanya le maemo ho tloha ho le letšehali ho ea ho le letona. Fetola boemo ba ho romela ka kakaretso beseng ea mono ka taolo ea rotary ea M/C LEVEL. Tobetsa ea VIEW konopo ho fumana lintlha tse qaqileng haholoanyane ho Main Display.
7. PONTSHO EA KA KHOLO - Boholo ba litsamaiso tsa M32 li ka hlophisoa le ho beoa leihlo ka Main Display. Ha the VIEW konopo e tobetsoe ho efe kapa efe ea likarolo tsa taolo ea taolo, ke mona moo li ka bang teng viewed. Pontšo e kholo e boetse e sebelisetsoa ho fihlella litlamorao tse ka bang 60+. Sheba karolo ea 3. Pontšo e kholo.
8. MOHLOLI – Fetola boemo ba sephetho sa li-monitor ka taolo ea rotary ea MONITOR LEVEL. Fetola boemo ba li-headphones ka taolo ea rotary ea PHONES LEVEL. Tobetsa konopo ea MONO ho beha leihlo molumo ho mono. Tobetsa konopo ea DIM ho fokotsa molumo oa ho shebella. Tobetsa ea VIEW konopo ho fetola palo ea ho fokotsa matla hammoho le mesebetsi e meng e amanang le ho lekola.
9. TALKBACK - Hokela maekrofounu ea ho bua ka thapo e tloaelehileng ea XLR ka sokete ea EXT MIC. Fetola boemo ba maeke a talkback ka taolo ea rotary ea TALK LEVEL. Kgetha moo letshwao la talkback le yang teng ka dikonopo tsa TALK A/TALK B. Tobetsa ea VIEW konopo ho hlophisa tsela ea ho bua hape bakeng sa A le B.
10. SENES - Karolo ena e sebelisetsoa ho boloka le ho hopola liketsahalo tse iketsang ka har'a komporo, ho lumella meralo e fapaneng hore e hopoloe hamorao. Ka kopo sheba ho Manual Manual bakeng sa lintlha tse ling ka taba ena.
11. Abela – Abela li-control tse 'ne ho li-parameter tse fapaneng bakeng sa ho fihlella hanghang mesebetsing e sebelisoang hangata. Lipontšo tsa LCD li fana ka tšupiso e potlakileng ea likabelo tsa karolo e sebetsang ea taolo ea tloaelo. Abela konopo e 'ngoe le e 'ngoe ho tse robeli tsa tloaelo ASSIGN (a linomoro 5-12) ho li-parameter tse fapaneng bakeng sa phihlello ea hang-hang ea mesebetsi e sebelisoang hangata. Tobetsa e 'ngoe ea likonopo tsa SET ho kenya tšebetsong e 'ngoe ea likarolo tse tharo tsa li-control tse ka abeloang. Ka kopo sheba Buka ea Mosebelisi bakeng sa lintlha tse ling mabapi le sehlooho sena.
12. LIHLOPHA TSA BUUTSA - Tobetsa e 'ngoe ea likonopo tse karolong ea MUTE GROUPS ho kenya se seng sa dihlopha tse dimumu tshebetsong. Bakeng sa lintlha tse ling, sheba MUTE GRP karolong ea 3. Pontšo e kholo.
13. LITŠOANTŠISO TSA HO KENYA - Karolo ea Input Channels ea console e fana ka lihlopha tse 16 tse arohaneng tsa ho kenya. Li-strip li emela likarolo tse 'ne tse arohaneng tsa ho kenya letsoho bakeng sa console, e' ngoe le e 'ngoe e ka fihlellehang ka ho tobetsa e' ngoe ea likonopo tse latelang:
    • INPUTS 1-16 - ea pele le ea bobeli e thibela liteishene tse robeli tse fanoeng leqepheng la ROUTING / HOME
    • LITLHAKISO 17-32 - li-block tsa boraro le tsa bone tsa liteishene tse robeli tse fanoeng leqepheng la ROUTING / HOME
    • AUX IN / USB - sebaka sa bohlano sa liteishene tse tšeletseng le USB Recorder, le liteishene tse robeli tsa FX (1L ... 4R)
    • BUS MAST - sena se o lumella ho fetola maemo a 16 Mix Bus Masters, a bohlokoa ha o kenyelletsa Bus Masters ho likabelo tsa Sehlopha sa DCA, kapa ha o kopanya libese ho matrices 1-6.
      Tobetsa leha e le efe ea likonopo tse ka holimo (e ka letsohong le letšehali la Channel Strip) ho chencha banka ea mocha e kenang ho efe kapa efe ea mekhahlelo e mene e thathamisitsoeng ka holimo. Konopo e tla khantša ho bontša hore na ke lera lefe le sebetsang.
      U tla fumana konopo ea SEL (khetha) ka holim'a mocha o mong le o mong o sebelisetsoang ho lebisa tlhokomelo ea taolo ea sebopeho sa mosebedisi, ho kenyelletsa le liparamente tsohle tse amanang le mocha oa mocha oo.
      Kamehla ho na le kanale e le 'ngoe e khethiloeng.
      Pontšo ea LED e bonts'a boemo ba hajoale ba molumo oa molumo ka kanale eo.
      Konopo ea SOLO e arola lets'oao la molumo bakeng sa ho lekola kanale eo.
      LCD Scribble Strip (e ka hlophisoang ka Pontšo e Kholo) e bonts'a kabelo ea hajoale ea kanale.
      Konopo ea MUTE e fetola molumo bakeng sa kanale eo.
14. LICHANELE TSA SEHLOPHA/BESE - Karolo ena e fana ka liteishene tse robeli, tse abetsoeng e 'ngoe ea mekhahlelo e latelang:
    • GROUP DCA 1-8 – Eight DCA (Digitally Controled Amplifier) ​​lihlopha
    • BUS 1-8 - Mix Bus masters 1-8
    • BUS 9-16 - Mix Bus Masters 9-16
    • MTX 1-6 / MAIN C - Matrix Outputs 1-6 le bese ea Main Center (Mono).
      Likonopo tsa SEL, SOLO & MUTE, ponts'o ea LED, le lesela le ngotsoeng la LCD kaofela li itšoara ka tsela e ts'oanang le ea LITLHAKU TSA HO KENYA.
15. KHALE E KHOLO - Sena se laola bese ea Master Output mix stereo.
    Likonopo tsa SEL, SOLO & MUTE, le lesela le ngotsoeng la LCD kaofela li itšoara ka tsela e ts'oanang le ea LITLHAKU TSA INPUT.
    Konopo ea CLR SOLO e tlosa mesebetsi efe kapa efe ea solo ho tsoa ho liteishene tse ling.

Ka kopo sheba ho Manual Manual bakeng sa tlhaiso-leseling e batsi ho e 'ngoe le e' ngoe ea lihlooho tsena.

Panele e ka morao

1. TLHOKOMELISO/LAOLI LITLHAHISO TSA KAmore - hokela li-studio tsa li-studio u sebelisa lisebelisoa tsa XLR kapa ¼ ”. E kenyelletsa 12 V / 5 W lamp kgokelo.
2. TSE HLAHANG 1 - 16 - Romella molumo oa analogue lisebelisoa tsa kantle u sebelisa likhoele tsa XLR. Liphetho tsa 15 le 16 ka ho sa feleng li na le matšoao a mantlha a libese tsa stereo.
3. LIKETSO 1 - 32 - Hokela mehloli ea molumo (joalo ka li-microphone kapa mehloli ea boemo ba mohala) ka lithapo tsa XLR.
4. MATLA - Sokete ea mantlha ea IEC le switch ea ON/OFF.
5. DN32-LIVE INTERFACE CARD – Fetisetsa liteishene tse fihlang ho tse 32 ho tsoa komporong le ho tsoa komporong ka USB 2.0, 'me u rekote likanale tse fihlang ho tse 32 ho likarete tsa SD/SDHC.
6. LITLHAKISO TSA TAOLI TSA REMOTE - Hokela ho PC bakeng sa taolo e hole ka thapo ea Shielded Ethernet.
7. MIDI IN/OUT - Romela le ho amohela litaelo tsa MIDI ka likhoele tsa 5-pin DIN.
8. AES/EBU OUT - Romella molumo oa dijithale ka thapo ea 3-pin AES/EBU XLR.
9. ULTRANET - Hokela ho sistimi ea ho beha leihlo, joalo ka Behringer P16, ka thapo ea Shielded Ethernet.
10. AES50 A/B – Fetisetsa likanale tse fihlang ho tse 96 ka hare le kantle ka lithapo tsa Shielded Ethernet.
11. AUX IN/OUT - Hokela le ho tsoa lisebelisoa tsa kantle ka lithapo tsa ¼” kapa tsa RCA.

Ka kopo sheba ho Manual Manual bakeng sa tlhaiso-leseling e batsi ho e 'ngoe le e' ngoe ea lihlooho tsena.

Pontsho e ka Sehloohong

1. BONTŠA Skrine - Litaolo tse karolong ena li sebelisoa 'moho le skrini sa mebala e le ho tsamaisa le ho laola likarolo tsa setšoantšo seo se nang le sona. Ka ho kenyelletsa litaolo tsa rotary tse tsamaellanang le li-control tse haufi skrineng, hammoho le ho kenyelletsa likonopo tsa cursor, mosebelisi a ka khona ho tsamaisa le ho laola likarolo tsohle tsa skrini sa mebala. Skrine ea mebala e na le lipontšo tse fapaneng tse fanang ka maikutlo a pono bakeng sa ts'ebetso ea console, hape e lumella mosebelisi ho etsa liphetoho tse fapaneng tse sa fanoang ke taolo ea lisebelisoa tse inehetseng.
2. MAIN/SOLO MTERS - Metara ena e likarolo li tharo ea likarolo tse 24 e bonts'a bophahamo ba leqhubu la audio ho tsoa beseng e kholo, hammoho le setsi se seholo kapa bese ea solo ea console.
3. LIKONANE TSA HO KHETHA SKREEN - Likonopo tsena tse robeli tse boneselitsoeng li lumella mosebelisi ho ea hang-hang ho efe kapa efe ea li-skrini tse hloahloa tse robeli tse arabang likarolo tse fapaneng tsa khokahano. Likarolo tse ka tsamaisoang ka sekepe ke:
   • LEHAE - Skrini sa HOME se na le tse fetangview ea mocha o khethiloeng oa ho kenya kapa oa tlhahiso, 'me e fana ka liphetoho tse fapaneng tse sa fumaneheng ka li-control panel tse inehetseng.
     Sesepa sa HOME se na le li-tab tse arohaneng tse latelang:
     • home: Tsela ya letshwao la kakaretso bakeng sa sekeno se kgethilweng kapa kanale e ntshiwang.
     • config: E lumella khetho ea mohloli oa lets'oao / sebaka seo se eang ho sona bakeng sa mocha, tlhophiso ea sebaka sa ho kenya, le litlhophiso tse ling.
     • heke: E laola le ho bonts'a phello ea heke ea kanale ho feta tse fanoang ke li-control tse inehetseng tse holimo.
     • dyn: Dynamics - e laola le ho bonts'a phello ea li-channel dynamics (compressor) ho feta tse fanoang ke li-control tse inehetseng tse holimo.
     • eq: E laola le ho bonts'a phello ea mocha oa EQ ho feta tse fanoang ke li-control tse inehetseng tse holimo.
     • sends: Ditaolo le dipontsho tsa dikanale tse rometsweng, jwalo ka ho romela methara le ho romela dimuting.
     • mantlha: Litaolo le lipontšo bakeng sa tlhahiso ea kanale e khethiloeng.
   • METSI - Skrine sa limithara se bonts'a lihlopha tse fapaneng tsa limithara tsa boemo bakeng sa litsela tse fapaneng tsa mats'oao, 'me se bohlokoa bakeng sa ho tseba kapele hore na likanale life kapa life li hloka ho lokisoa ha boemo. Kaha ha ho na litlhophiso tse lokelang ho lokisoa bakeng sa lipontšo tsa metering, ha ho le e 'ngoe ea li-skrini tsa metering tse nang le li-control tsa "tlase ho skrine" tseo ka tloaelo li ka lokisoang ke li-control tse tšeletseng tsa rotary. Skrine sa METER se na le li-tabo tsa skrine tse arohaneng tse latelang, e 'ngoe le e 'ngoe e na le limithara tsa boemo bakeng sa litsela tse amehang tsa matšoao: kanale, mix bese, aux/fx, in/out le rta.
   • TSELA - Skrine sa ROUTING ke moo patching eohle ea mats'oao e etsoang, e lumellang mosebelisi ho tsamaisa litselana tsa mats'oao a kahare ho tsoa le ho tsoa ho lihokelo tsa 'mele / liphetho tse fumanehang karolong e ka morao ea console.
     Skrine ea ROUTING e na le likhaba tse latelang tse arohaneng:
     • Lehae: E lumella ho ts'oaroa ha lintho tse kenang 'meleng ho likanale tse 32 tsa ho kenya le lisebelisoa tse ling tsa khomphutha.
     • tsoa 1-16: E lumella ho ts'oaroa ha litsela tsa mats'oao a kahare ho liphetho tsa XLR tse 16 tse ka morao.
     • aux out: E lumella ho ts'oaroa ha litsela tsa mats'oao a kahare ho phanele e ka morao ea khomphutha ¼” / liphetho tse thusang tsa RCA.
     • p16 out: E lumella ho patch ea litsela tsa mats'oao a kahare ho liphetho tse 16 tsa tlhahiso ea 16-channel P16 Ultranet ea console.
     • card out: E lumella ho patch ea litsela tsa mats'oao a kahare ho liphetho tse 32 tsa karete ea katoloso.
     • aes50-a: E lumella ho ts'oaroa ha litsela tsa matšoao a kahare ho liphetho tse 48 tsa phanele e ka morao ea AES50-A.
     • aes50-b: E lumella ho ts'oaroa ha litsela tsa matšoao a kahare ho liphetho tse 48 tsa phanele e ka morao ea AES50-B.
     • xlr out: E lumella mosebelisi ho hlophisa ho tsoa ha XLR ka morao ho khomphutha ka li-blocks tse 'ne, ho tsoa ho tse ling tsa lehae, melapo ea AES, kapa karete ea katoloso.
   • TLHOPHISO - Sesepa sa SETUP se fana ka taolo bakeng sa ts'ebetso ea lefatše ka bophara, e phahameng, joalo ka liphetoho tsa bonts'a, sample rates & amahanyo, litlhophiso tsa basebelisi, le tlhophiso ea marang-rang.
     Sesepa sa SETUP se na le li-tab tse latelang tse arohaneng:
     • global: Skrine sena se fana ka liphetoho bakeng sa likhetho tse fapaneng tsa lefats'e tsa hore na console e sebetsa joang.
     • config: Skrine sena se fana ka liphetoho bakeng sa sample litekanyetso le ho hokahanya, hammoho le ho hlophisa litlhophiso tsa boemo bo holimo bakeng sa libese tsa litsela tsa matšoao.
     • remote: Skrine sena se fana ka litsamaiso tse fapaneng tsa ho theha console joalo ka sebaka sa taolo bakeng sa software e fapaneng ea ho rekota ea DAW komporong e hokahaneng. E boetse e hlophisa likhetho tsa MIDI Rx/Tx.
     • marang-rang: Skrine sena se fana ka litsamaiso tse fapaneng tsa ho hokela console ho netweke e tloaelehileng ea Ethernet. (Aterese ea IP, Subnet Mask, Gateway.)
     • scribble strip: Skrine sena se fana ka litsamaiso bakeng sa mokhoa o fapaneng oa ho etsa li-stribble tsa LCD tsa console.
     • pele hoamps: E bonts'a phaello ea analogue bakeng sa lisebelisoa tsa maeke tsa lehae (XLR ka morao) le matla a phantom, ho kenyelletsa le ho seta ho tsoa ho stagMabokose a e (mohlala, DL16) a hoketsoeng ka AES50.
     • karete: Skrine sena se khetha tlhophiso ea ho kenya / tlhahiso ea karete ea sebopeho e kentsoeng.
   • LAEBRARI - Sesepa sa LIBRARY se lumella ho kenya le ho boloka li-setups tse sebelisoang haholo bakeng sa lisebelisoa tsa mocha, li-processor tsa litlamorao le maemo a tsela.
     Sesepa sa LIBRARY se na le li-tab tse latelang:
     • mocha: Taba ena e lumella mosebelisi ho kenya le ho boloka metsoako e sebelisoang hangata ea ts'ebetso ea kanale, ho kenyelletsa le matla le ho lekana.
     • liphello: tab ya ena lumella mosebedisi ho laela le ho boloka ka tloaelo sebelisoa liphello processor presets.
     • routing: Taba ena e lumella mosebelisi ho kenya le ho boloka litsamaiso tsa mats'oao tse sebelisoang hangata.
   • LITŠOANTŠISO - Sesepa sa EFFECTS se laola likarolo tse fapaneng tsa li-processor tsa litlamorao tse robeli. Ho skrineng sena mosebelisi a ka khetha mefuta e itseng ea litlamorao bakeng sa li-processor tse robeli tsa litlamorao tsa kahare, a hlophise tsela ea tsona ea ho kenya le ho tsoa, ​​ho lekola maemo a tsona, le ho lokisa mekhahlelo e fapaneng ea litlamorao.
     Sesepa sa EFFECTS se na le likhaba tse latelang tse arohaneng:
     • lapeng: Skrine sa lapeng se fana ka kakaretso e akaretsangview ea litlamorao tse hlakileng, tse bonts'ang phello e kentsoeng ho e 'ngoe le e' ngoe ea marulelo a robeli, hammoho le ho bonts'a litsela tsa ho kenya / ho tsoa bakeng sa sekotjana ka seng le maemo a lets'oao la I / O.
     • fx1-8: Lits'oants'o tsena tse robeli tse kopitsoang li bonts'a lintlha tsohle tse amehang bakeng sa li-processor tse robeli tse arohaneng, tse lumellang mosebelisi ho fetola liparamente tsohle bakeng sa phello e khethiloeng.
   • LUMULA GRP - Skrine sa MUTE GRP se lumella kabelo e potlakileng le taolo ea lihlopha tse tšeletseng tsa limumu, 'me e fana ka mesebetsi e' meli e arohaneng:
     1. E khutsisa skrine e sebetsang nakong ea ho abela liteishene ho lihlopha tse khutsitseng. Sena se etsa bonnete ba hore ha ho liteishene tse khutsisoang ka phoso nakong ea tšebetso ea likabelo nakong ea ts'ebetso e etsahalang.
     2. E fana ka sebopeho se eketsehileng bakeng sa ho khutsisa / ho theola lihlopha ho kenyelletsa likonopo tse inehetseng tsa sehlopha sa limumu tlase ho khomphutha.
   • SEBELISA - Sesepa sa UTILITY ke skrine e tlatselletsang e etselitsoeng ho sebetsa hammoho le li-skrini tse ling tse ka bang teng view nako efe kapa efe. Sesebelisoa sa UTILITY ha se bonngoe ka bosona, se lula se le teng maemong a skrine se seng, 'me hangata se tlisa mesebetsi ea kopi, ho peista le laeborari kapa ea ho iketsetsa.
4. LITSAMAISO TSA ROTARY - Lisebelisoa tsena tse tšeletseng tsa rotary li sebelisetsoa ho fetola likarolo tse fapaneng tse kaholimo ho tsona. E 'ngoe le e' ngoe ea litsamaiso tse tšeletseng e ka sutumelletsoa kahare ho kenya ts'ebetso ea konopo. Mosebetsi ona o na le thuso ha o laola likarolo tse nang le boemo ba ho bulela / ho tima tse laoloang hantle ke konopo, ho fapana le maemo a fapaneng a ntlafatsoang hantle ke taolo ea rotary.
5. HOLIMO/TLAS'A/LE-LETEM/LE LETSATSI LA HO TSAMAISA TSAMAISO - Litaolo tsa LEFT le RIGHT li lumella ho sesa ka ho le letšehali hara maqephe a fapaneng a fumanehang ka har'a seteishene. Pontšo ea lits'oants'o e bonts'a leqephe leo u leng ho lona hona joale. Ho li-skrini tse ling ho na le mekhahlelo e mengata ho feta e ka fetoloang ke litsamaiso tse tšeletseng tsa rotary ka tlase. Maemong ana, sebelisa likonopo tsa UP le DOWN ho sheba likarolo tse ling tse fumanehang leqepheng la skrine. Ka linako tse ling likonopo tsa LEFT le RIGHT li sebelisoa ho netefatsa kapa ho hlakola li-pop-up tsa netefatso.

Ka kopo sheba ho Manual Manual bakeng sa tlhaiso-leseling e batsi ho e 'ngoe le e' ngoe ea lihlooho tsena.

Karolo e Potlakileng ea Referense

Ho fetola li-LCD tsa Strip Channel

1. Tšoara konopo ea khetho bakeng sa kanale eo u lakatsang ho e fetola ebe u tobetsa UTILITY.
2. Sebelisa li-rotary control tse ka tlase ho skrine ho fetola li-parameter.
3. Hape ho na le tabo e inehetseng ea Scribble Strip ho SETUP menu.
4. Khetha kanale ha u ntse u viewkenya skrine sena ho se hlophisa.

Ho sebelisa libese

• Ho seta bese:
  • M32 e fana ka libese tse feto-fetohang haholo kaha bese e 'ngoe le e 'ngoe ea seteishene e ka ikemela pele kapa Post-Fader, (e khethiloeng ka lipara tsa libese). Kgetha kanale ebe o tobetsa VIEW karolong ea BUS SENDS karolong ea mocha.
  • Hlahisa likhetho tsa Pre / Post / Subgroup ka ho tobetsa konopo ea Down Navigation ka skrini.
  • Ho hlophisa bese lefatšeng ka bophara, tobetsa konopo ea SEL ebe o tobetsa VIEW ho CONFIG / PREAMP karolo ea sekhechana sa mocha. Sebelisa taolo ea rotary ea boraro ho fetola maemo. Sena se tla ama liteishene tsohle tse romelloang beseng ena.
    Tlhokomeliso: Libese tse kopantseng li ka hokahana ka lipara tse sa tloaelehang esita le tse haufi ho theha libese tse tsoakaneng tsa stereo. Ho hokahanya libese hammoho, khetha e le 'ngoe ebe o tobetsa ea VIEW konopo haufi le CONFIG / PREAMP karolo ea mocha oa mocha.
  • Tobetsa taolo ea rotary ea pele ho hokahanya. Ha u romella libese tsena, taolo ea rotary ea BUS SEND e sa tloaelehang e tla fetola boemo ba ho romella esita le taolo ea rotary ea BUS SEND e tla lokisa pan/balance.

Metsoako ea Matrix

• Metsoako ea Matrix e ka fepeloa ka bese efe kapa efe ea Remix hammoho le bese ea MAIN LR le Center / Mono.
• Ho romela ho Matrix, tobetsa pele konopo ea SEL ka holimo ho bese eo u batlang ho e romela. Sebelisa li-rotary control tse 'ne karolong ea BUS SENDS ea sebaka sa seteishene. Litaolo tsa rotary 1-4 li tla romella ho Matrix 1-4.
• Tobetsa konopo ea 5-8 ho sebelisa litsamaiso tse peli tsa pele tsa rotary ho li romella ho Matrix 5-6. Haeba u tobetsa VIEW konopo, o tla fumana lintlha tse qaqileng view ea Matrix a tšeletseng e romella bese e khethiloeng.
• Finyella metsoako ea Matrix u sebelisa lera la bone ho lihlahisoa tse hlahisang lihlahisoa. Khetha motsoako oa Matrix molemong oa ho fihlella sekhechana sa mocha oa eona, ho kenyeletsoa le matla a nang le li-parametric EQ tse 6-band le crossover.
• Bakeng sa stereo Matrix, khetha Matrix ebe o tobetsa konopo VIEW konopo ho CONFIG / PREAMP karolo ea sekhechana sa mocha. Tobetsa taolo ea pele ea "rotary" haufi le skrine ho hokela, ho etsa para ea stereo.
  Hlokomela, panning ea stereo e sebetsoa ke le BUS SEND rotary control joalo ka ha ho hlalositsoe ho Sebelisa libese kaholimo.

Ho sebelisa Lihlopha tsa DCA
Sebelisa Lihlopha tsa DCA ho laola bophahamo ba liteishene tse ngata ka fader e le 'ngoe.

1. Ho abela kanale ho DCA, qala ka ho netefatsa hore u na le lera la GROUP DCA 1-8 le khethiloeng.
2. Tobetsa o tšoare konopo e khethiloeng ea DCA eo u lakatsang ho e hlophisa.
3. Ka nako e tšoanang, tobetsa likonopo tse khethiloeng tsa kanale eo u lakatsang ho e eketsa kapa ho e tlosa.
4. Ha mocha o abetsoe, konopo ea ona e khethiloeng e tla khanya ha o tobetsa konopo ea SEL ea DCA ea eona.

E romella Fader
Ho sebelisa Send on Faders, tobetsa konopo ea Send on Faders e haufi le bohareng ba konsole.
Hona joale o ka sebelisa Send On Faders ka e 'ngoe ea litsela tse peli tse fapaneng.

1. U sebelisa li-fader tse 16 tsa ho kenya: Khetha bese karolong e ka ho le letona 'me li-fader tse ka letsohong le letšehali li tla bonts'a motsoako o romelloang beseng e khethiloeng.
2. U sebelisa li-fader tsa libese tse robeli: Tobetsa konopo ea khetho ea kanale ea ho kenya karolong ea ho kenya ka lehlakoreng le letšehali. Phahamisa fader ea bese ka lehlakoreng le letona la console ho romella kanale bese eo.

Limumu Groups

1. Ho abela/ho tlosa kanale ho Sehlopha sa Limumu, tobetsa konopo ea ho khetha skrine ea MUTE GRP. U tla tseba hore u boemong ba ho fetola ha konopo ea MUTE GRP e khantša 'me Lihlopha tse tšeletseng tsa Mute li hlaha ho li-control tse tšeletseng tsa rotary.
2. Joale tobetsa 'me u tšoare e' ngoe ea likonopo tse tšeletseng tsa Sehlopha sa Limumu tseo u lakatsang ho li sebelisa 'me ka nako e le' ngoe u tobetse konopo ea SEL ea kanale eo u lakatsang ho e eketsa kapa ho e tlosa sehlopheng seo sa Mute.
3. Ha o qetile, tobetsa konopo ea MUTE GRP hape ho bula likonopo tse inehetseng tsa Sehlopha sa Mute ho M32.
4. Lihlopha tsa hau tsa Limumu li se li loketse ho sebelisoa.

Taolo e Abeloang

1. M32 e na le li-control tse ka abeloang ke mosebelisi le likonopo ka mekhahlelo e meraro. Ho li abela, tobetsa konopo ea VIEW konopo karolong ea ASSIGN.
2. Sebelisa konopo ea ho tsamaea ka ho le letšehali le ka ho le letona ho khetha Seta kapa lera la taolo. Tsena li tla tsamaellana le likonopo tsa SET A, B le C ho console.
3. Sebelisa li-rotary control ho khetha taolo le ho khetha tšebetso ea eona.

Hlokomela: LCD Scribble Strips e tla fetoha ho bonts'a taolo eo e behetsoeng eona.

Rack ea Liphello

1. Tobetsa konopo ea EFFECTS haufi le skrine ho bona ho fetaview ea li-processor tse robeli tsa litlamorao tsa stereo. Hopola hore litlamorao tsa 1-4 ke tsa litlamorao tsa mofuta oa Send, 'me likhahla tsa 5-8 ke tsa litlamorao tsa mofuta oa Insert.
2. Ho hlophisa phello, sebelisa taolo ea rotary ea botšelela ho khetha sekhahla sa litlamorao.
3. Ha sekhetho sa likhetho se ntse se khethoa, sebelisa taolo ea bohlano ea rotary ho fetola hore na ke phello efe ho slot eo, 'me u netefatse ka ho tobetsa taolo. Tobetsa taolo ea rotary ea botšelela ho hlophisa likarolo tsa seo.
4. Liphello tse fetang 60 li kenyelletsa Maele, Ho lieha, Chorus, Flanger, Limiter, 31-Band GEQ, le tse ling. Ka kopo sheba ho Manual Manual bakeng la lenane le felletseng la tšebetso.

Lisebelisoa tsa Firmware le Rekoto ea USB Stick

• Ho Ntlafatsa Firmware:
  • Khoasolla firmware e ncha ho tsoa leqepheng la sehlahisoa sa M32 ho ea boemong ba motso oa sticker ea memori ea USB.
  • Tobetsa o tšoare likarolo tsa RECORDER VIEW konopo ha u ntse u bulela konopo ho kenya mokhoa oa ntlafatso.
  • Tšoaea molamu oa memori oa USB kaholimo ho sehokelo sa USB.
  • M32 e tla emela hore USB drive e lokisoe ebe e tsamaisa ntlafatso ea firmware ka botlalo.
  • Ha drive ea USB e sa khone ho itokisa, ntlafatso e ke ke ea khonahala mme re khothaletsa ho tima konopo hape ho bulela firmware e fetileng.
  • Ts'ebetso ea ntlafatso e tla nka metsotso e 'meli ho isa ho e meraro ho feta tatellano ea boot e tloaelehileng.
• Ho Rekota ho USB Stick:
  • Kenya USB Stick koung ea RECORDER ebe u tobetsa konopo ea VIEW konopo.
  • Sebelisa leqephe la bobeli ho hlophisa sehatisi.
  • Tobetsa taolo ea bohlano ea rotary tlasa skrine ho qala ho rekota.
  • Sebelisa taolo ea pele ea rotary ho emisa. Emela lebone la ACCESS hore le time pele u tlosa molamu.
    Lintlha: Thupa e tlameha ho hlophisoa bakeng sa FAT file tsamaiso. Nako e kholo ea ho rekota ke lihora tse ka bang tharo ho e 'ngoe le e 'ngoe file,ka a file moeli oa boholo ba 2 GB. Ho rekota ho 16-bit, 44.1 kHz kapa 48 kHz ho ipapisitse le console s.ample sekhahla.

Setšoantšo se Thibeloang

Setšoantšo sa Block Block MIDAS M32 LIVE:

Litlhaloso

• Ho sebetsa
  

  Litsela tsa ho kenya letsoho	Litsela tse 32 tsa ho kenya, Litsela tse 8 tsa Aux, Litsela tse 8 tsa ho Khutlisa tsa FX
  Litsela tsa Phatlalatso ea Khumo	16
  Libese tse 16, matrices a 6, LRC e kholo	100
  Lienjineri tsa kahare (True Stereo / Mono)	16
  Pontšo ea ka hare ea li-automation (li-Cue / Snippets tse hlophisitsoeng)	500/100
  Likarolo tsa ka hare tsa kakaretso tse ka hare (inc. Peleamplifiers le Faders)	100
  Tshebetso ea Letshwao	Sebaka se Phaphameng sa 40-Bit
  Phetoho ea A / D (8-kanale, 96 kHz e loketse)	114 dB Dynamic Range (A-weighted*)
  Phetoho (stereo, 96 kHz e loketse)	120 dB Dynamic Range (A-weighted*)
  Latency ea I / O (Keletso ea Console ho Phallo)	0.8 ms
  Latency ea Marangrang (StagLebokose In> Console> S.tagE Box Out)	1.1 ms

• Lihokelo
  

  Microphone ea Series Series ea MIDAS PRO Peleampsefofane (XLR)	32
  Keletso ea Microphone ea Talkback (XLR)	1
  Lits'ebetso / Lintho tsa RCA	2
  Litholoana tsa XLR	16
  Litholoana tsa ho Lekola (XLR / ¼ ”TRS e Leka-lekane)	2
  Litheko / Liphetho tsa Aux (¼ ”TRS e leka-lekaneng)	6
  Lits'oalo tsa Mehala (¼ ”TRS)	2 (stereo)
  Digital AES/EBU Output (XLR)	1
  Likepe tsa AES50 (Klark Teknik SuperMAC)	2
  Sebopeho sa Karete ea Katoloso	32 Channel Audio Keletso / di neng di kwalwa
  Sehokedi sa ULTRANET P-16 (Ha ho Matla a Fanoang)	1
  Liphumano / Liphetho tsa MIDI	1
  Mofuta oa USB A (Audio le Data Import / Export)	1
  Mofuta oa B oa USB, karolo e ka morao bakeng sa taolo e hole	1
  Ethernet, RJ45, karolo e ka morao, bakeng sa taolo e hole	1

• Litšobotsi tsa ho kenya Mic
  

  Moralo	Sehlopha sa Midas PRO
  THD + N (phaello ea 0 dB, tlhahiso ea 0 dBu)	<0.01% (ntle le boima)
  THD + N (+40 dB phaello, 0 dBu ho +20 dBu tlhahiso)	<0.03% (ntle le boima)
  Input Impedance (E sa leka-lekanang / e leka-lekaneng)	Tse 10 kΩ / 10 kΩ
  Boemo ba Keketso e sa Buoang Boholo	+23 dBu
  Matla a Phantom (switchable per input)	+ 48 V
  Lerata le lekanang la Input @ +45 dB (150 Ω mohloli)	-125 dBu (22 Hz-22 kHz, e se nang boima)
  CMRR @ Unity Gain (Tloaelehileng)	> 70dB
  CMRR @ 40 dB Ho Fumana (Tloaelehileng)	> 90dB

• Litšobotsi tsa ho kenya / ho tsoa
  

  Kakaretso ea Karabo @ 48 kHz S.ample Rate	0 dB ho ea -1 dB (20 Hz-20 kHz)
  Palo ea Matla, Analogue In to Analogue Out	106 dB (22 Hz-22 kHz, e se nang boima)
  Palo ea Matla a A / D, Peleamplifier le Converter (Tloaelehileng)	109 dB (22 Hz-22 kHz, e se nang boima)
  D / A Dynamic Range, Converter le Output (Tloaelehileng)	109 dB (22 Hz-22 kHz, e se nang boima)
  Khahlanong le Crosstalk @ 1 kHz, Litsela tse Haufi	100dB
  Boemo ba tlhahiso, XLR lihokedi (Ka lebitso / Boholo)	+4 dBu / + 21 dBu
  Impedance ea Phallo, Lihokelo tsa XLR (Tse sa Lekaneng / Tse leka-lekaneng)	50 Ω / 50 Ω
  Phallo ea ho kenya, TRS Connectors (E sa leka-lekanang / e leka-lekaneng)	20k Ω / 40k Ω
  Nete ​​ea ho Kena e sa reng letho, Lihokelo tsa TRS	+15 dBu
  Boemo ba ho tsoa, ​​TRS (Ka lebitso / Boholo)	-2 dBu / +15 dBu
  Tlhahiso ea Impedance, TRS (E sa leka-lekanang / e leka-lekaneng)	100 Ω / 200 Ω
  Mehala ea Phallo ea Phallo / Boemo bo phahameng ba tlhahiso	40 Ω / +21 dBu (tsa stereo)
  Lebelo la Lerata le Setseng, Kantle ho 1-16 XLR Lihokedi, Bonngoe bo Fumana	-85 dBu 22 Hz-22 kHz e se nang boima
  Maemo a lerata a salletseng, kantle ho 1-16 XLR lihokelo	-88 dBu 22 Hz-22 kHz e se nang boima
  Lekala la Lerata le Setseng, TRS le Monitor tsoa XLR Lihokedi	-83 dBu 22 Hz-22 kHz e se nang boima

• Sesebelisoa sa USB sa DN32-LIVE
  

  Lebelo le phahameng la USB 2.0, mofuta-B (sebopeho sa audio / MIDI)	1
  Litsela tsa ho kenya / tsa tlhahiso tsa USB, duplex	32, 16, 8, 2
  Lisebelisoa tsa Windows DAW (ASIO, WASAPI le WDM interface ea sesebelisoa sa audio)	Fumana 7 32/64-bit, Win10 32/64-bit
  Likopo tsa Mac OSX DAW (Intel CPU feela, ha ho tšehetso ea PPC, CoreAudio)	Mac OSX 10.6.8 **, 10.7.5, 10.8, 10.9, 10.10, 10.11, 10.12

• Sebopeho sa DN32-LIVE SD Card
  

  Likarete tsa SD, SD / SDHC	2
  SD / SDHC e ts'ehetsoa file tsamaiso	FAT32
  Bokhoni ba karete ea SD / SDHC, sekotjana ka seng	1 ho isa ho 32 GB
  Leshala bakeng sa motlakase o tima tšireletso (ha o ikhethela)	CR123A Lithium sele
  Litsela tsa ho kenya / ho kenya karete ea SD	32, 16, 8
  Samplitefiso (hora ea console)	44.1 kHz / 48 kHz
  Sample bolelele ba lentsoe	PCM e 32 hanyane
  File fomati (liteishene tse ngata tse sa hatelloang)	Litsela tsa WAV 8, 16 kapa 32
  Nako e phahameng ea ho rekota (32 ch, 44.1 kHz, 32-bit ho li-media tse 32 GB SDHC)	200 mets
  Ts'ebetso e tloaelehileng ea ho rekota kapa ho bapala	Likanale tse 32 mecheng ea litaba ea sehlopha sa 10, liteishene tse 8 kapa tse 16 mecheng ea litaba ea sehlopha sa 6

• Pontšo
  

  Sekrine se seholo	7, TFT LCD, 800 x 480 Qeto, 262k Colours
  Sesebelisoa sa LCD sa Channel	128 x 64 LCD e nang le RGB Colourlightlight
  Metara e ka sehloohong	Karolo ea 24 (-57 dB ho Clip)

• Matla
  

  Phepelo ea Matla a Switch-Mode	Auto-Ranging 100-240 VAC (50/60 Hz) ± 10%
  Tšebeliso ea Matla	120 W

• Ea nama
  

  Standard sebetsa Mocheso Range	5°C – 45°C (41°F – 113°F)
  Litekanyo	891 x 612 x 256 mm (35.1 x 24.1 x 10.1″)
  Boima ba 'mele	25 lik'hilograma (55 lbs)

* Lipalo tse boima ba A li atisa ho ba ~ 3 dB
** OSX 10.6.8 Core Audio e tšehetsa molumo oa kanale oa 16×16

TLHOKOMELO

• Se ke oa kenya betri, Kotsi ea Chelete ea Chelete
• Sehlahisoa sena se na le coin/button cell battery. Haeba betri ea sele ea tšepe / konopo e metsoa, ​​e ka baka ho chesa ho matla ka hare ho lihora tsa 2 feela 'me e ka lebisa lefung.
• Boloka libeteri tse ncha le tse sebelisitsoeng hole le bana.
• Haeba karolo ea betri e sa koalehe ka mokhoa o sireletsehileng, emisa ho sebelisa sehlahisoa 'me u se behe hole le bana.
• Haeba u nahana hore libeteri li ka 'na tsa metsoa kapa li kentsoe ka har'a karolo efe kapa efe ea 'mele, batla thuso ea bongaka hanghang.
• Phetolo ea betri e nang le mofuta o fosahetseng o ka hlolang ts'ireletso! Kenya sebaka ka mofuta o tšoanang kapa o lekanang!
• Ho siea betri ka mocheso o phahameng haholo o potileng tikoloho e ka lebisang ho phatloheng kapa ho dutla hoa mokelikeli kapa khase e ka chang habonolo; le
• Betri e tlas'a khatello e tlase haholo ea moea e ka baka ho phatloha kapa ho dutla ha mokelikeli o tukang kapa khase.
• Tlhokomelo e lokela ho lebisoa ho likarolo tsa tikoloho tsa ho lahla betri.

Lintlha tse ling tsa bohlokoa

1. Ngolisa inthaneteng. Ka kopo, ngolisa lisebelisoa tsa hau tse ncha tsa Music Tribe hang ka mor'a hore u li reke ka ho etela musictribe.com. Ho ngolisa theko ea hau ka ho sebelisa foromo ea rona e bonolo ea Marang-rang ho re thusa ho sebetsana le likopo tsa hau tsa ho lokisa kapele le ka nepo. Hape, bala lipehelo le lipehelo tsa tiisetso ea rona, haeba ho hlokahala.
2. Ha e sebetse hantle. Haeba morekisi oa hau oa 'mino oa' mino oa 'mino a sa fumanehe sebakeng sa heno, o ka ikopanya le' mino oa moloko oa 'mino oa naha ea heno o thathamisitsoeng tlasa "Ts'ehetso" ho musictribe.com. Haeba naha ea heno e sa ngolisoe, ka kopo sheba hore na bothata ba hau bo ka sebetsoa ke "Ts'ehetso ea Marang-rang" e kanna ea fumanoa tlasa "Ts'ehetso" ho bokella.com. Ntle le moo, ka kopo romella kopo ea waranti ea inthaneteng ho bokella.com Pele o khutlisa sehlahisoa.
3. Maqhama a Matla. Pele o hokela yuniti ka har'a sokete ea motlakase, ka kopo etsa bonnete ba hore o sebelisa matla a motlakase a nepahetsengtage bakeng sa mohlala oa hau o khethehileng. Li-fuse tse fosahetseng li tlameha ho nkeloa sebaka ke li-fuse tsa mofuta o tšoanang le litekanyetso ntle le mokhelo.

LIEKETSENG FCC

Lebitso la Mokha o nang le Boikarabello: Khoebo ea 'Mino oa Khoebo NV Inc.
Aterese: 122 E. 42nd St.1, 8th Floor NY, NY 10168, United States
Aterese ea imeile: legal@musictribe.com

M32 PHELELA
Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa A, ho latela karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi ha thepa e sebelisoa sebakeng sa khoebo. Thepa ena e hlahisa, e sebelisa, 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela bukana ea litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Ho sebetsa ha thepa ena sebakeng sa bolulo ho ka 'na ha baka tšitiso e kotsi moo mosebedisi a tla hlokeha ho lokisa tšitiso eo ka litšenyehelo tsa hae.

Sesebelisoa sena se lumellana le Karolo ea 15 ea melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:

1. sesebelisoa sena se ke ke sa baka tšitiso e kotsi, le
2. sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.

Tlhokomeliso: Ho sebetsa ha thepa ena sebakeng sa bolulo ho ka baka tšitiso ea seea-le-moea.
Lintlha tsa bohlokoa:
Liphetoho kapa litokiso ho thepa e sa amoheloang ka ho hlaka ke Music Tribe li ka hlakola matla a mosebelisi a ho sebelisa thepa.

Ka hona, Music Tribe e phatlalatsa hore sehlahisoa sena se lumellana le Directive 2014/35/ EU,Directive 2014/30/EU, Directive 2011/65/EU le Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/ 2012 REACH SVHC le Directive 1907/2006/EC. Ho lahlwa ka nepo ha sehlahiswa sena: Letshwao lena le bontsha hore sehlahiswa sena ha se a tshwanela ho lahlwa le ditshila tsa ka tlung, ho ya ka Taelo ya WEEE (2012/19/EU) le molao wa naha ya hao. Sehlahisoa sena se lokela ho isoa setsing sa pokello se nang le laesense ea ho sebelisoa hape ha litšila tsa lisebelisoa tsa motlakase le tsa elektroniki (EEE). Tšoaro e mpe ea mofuta ona oa litšila e ka ba le tšusumetso e mpe tikolohong le bophelong ba batho ka lebaka la lintho tse ka bang kotsi tseo ka kakaretso li amahanngoang le EEE. Ka nako e ts'oanang, tšebelisano-'moho ea hau ka mokhoa o nepahetseng oa ho lahla sehlahisoa sena e tla kenya letsoho ts'ebelisong e ntle ea lisebelisoa tsa tlhaho. Ho fumana lintlha tse ling mabapi le moo u ka nkang lisebelisoa tsa hau tsa litšila hore li sebelisoe hape, ka kopo ikopanye le ofisi ea toropo ea heno, kapa tšebeletso ea ho bokella litšila lapeng.
Temana e felletseng ea EU DoC e fumaneha ho https://community.musictribe.com/
Moemeli oa EU: Lihlopha tsa 'Mino oa Tribe DK A/S
Aterese: Gammel Strand 44, DK-1202 København K, Denmark
Moemeli oa UK: Tribe ea 'Mino Brands UK Ltd.
Aterese: 8th Floor, 20 Farringdon Street London EC4A 4AB, United Kingdom

Litokomane / Lisebelisoa

MIDAS M32 LIVE Digital Console bakeng sa Live le Studio [pdf] Bukana ea Mosebelisi V 6.0, M32 LIVE Digital Console bakeng sa Live le Studio, M32 LIVE, M32 LIVE Digital Console, Digital Console bakeng sa Live le Studio, M32 LIVE Console, Digital Console, Console

Litšupiso

• Bukana ea Mosebelisi