Digital Console ea Live le Studio e nang le Likanale tse 40 tsa ho Kena, Tataiso ea mosebelisi ea MIDAS PRO ea 16

Sebelisa feela lithapo tsa libui tsa boleng bo holimo tse nang le ¼” TS kapa li-twist-locking plug tse kentsoeng esale pele. Ts'ebetso e 'ngoe kapa liphetoho tse ling kaofela li lokela ho etsoa feela ke basebetsi ba tšoanelehang.
Letšoao lena, hohle moo le hlahang teng, le u hlokomelisa ka boteng ba voltage ka hare ho sebaka se kampetsoeng - voltage ka ba ho lekaneng ho etsa kotsi ea ho makala.

Letšoao lena, kae kapa kae moo le hlahang teng, le u lemosa ka litaelo tsa bohlokoa tsa ts'ebetso le tlhokomelo libukeng tse tsamaeang le sehlooho sena. Ka kopo bala bukana ea tataiso.
Ho fokotsa kotsi ea ts'oaetso ea motlakase, u se ke ua tlosa sekoahelo se ka holimo (kapa karolo e ka morao). Ha ho na likarolo tse sebetsang tsa mosebelisi kahare. Fetisetsa litšebeletso ho basebetsi ba tšoanelehang.

Ho fokotsa kotsi ea ho cha le motlakase, se ke oa pepesetsa sesebelisoa sena pula le mongobo. Lisebelisoa li ke ke tsa pepesetsoa metsi a rothelang kapa a fafatsang mme ha ho na lintho tse tlatsitsoeng ka lintho tse metsi, joalo ka lijana, tse tla beoa lisebelisoa.
Litaelo tsena tsa litšebeletso ke tsa ho sebelisoa ke basebetsi ba nang le litsebo feela. Ho fokotsa kotsi ea ts'oaetso ea motlakase u se ke ua etsa litšebeletso tse ling ntle le tse fanoeng litaelong tsa ts'ebetso. Litokiso li tlameha ho etsoa ke basebeletsi ba tšoanelehang ba litšebeletso.

Bala litaelo tsena.
Boloka litaelo tsena.

Mamela litemoso tsohle.
Latela litaelo tsohle.

Se ke oa sebelisa sesebelisoa sena haufi le metsi.
Hloekisa feela ka lesela le omeletseng.

Se ke oa thibela menyetla efe kapa efe ea moea. Kenya ho latela litaelo tsa moetsi.
Se ke oa kenya haufi le mehloli efe kapa efe ea mocheso joalo ka li-radiator, lirejista tsa mocheso, litofo, kapa lisebelisoa tse ling (ho kenyeletsoa amplifiers) tse hlahisang mocheso.

Se ke oa hlola sepheo sa polokeho kapa polaka ea mofuta oa fatše. Polaka e polarised e na le mahare a mabeli ka bophara bo bong ho feta bo bong. Polaka ea mofuta oa fatše e na le mahare a mabeli le prong ea boraro ea motheo. Lehare le pharaletseng kapa prong ea boraro li fanoa bakeng sa polokeho ea hau. Haeba polaka e fanoeng e sa fihlele lebenkeleng la hau, ikopanye le setsebi sa motlakase bakeng sa sebaka se seng se felile.
Sireletsa thapo ea motlakase hore e se ke ea tsamauoa kapa e penngoa haholo-holo ho li-plug, lisebelisoa tse bonolo, le moo li tsoang teng.

Sebelisa feela liphutheloana/lisebelisoa tse boletsoeng ke moetsi.
Sebelisa feela ka kolotsana, stand, tripod, bracket, kapa tafole e boletsoeng ke moetsi, kapa e rekisoang ka lisebelisoa. Ha kariki e sebelisoa, ela hloko ha u tsamaisa motsoako oa kariki / lisebelisoa ho qoba ho tsoa kotsi ho tloha qetellong.

Tlosa sesebelisoa sena nakong ea sefefo sa lehalima kapa ha se sa sebelisoe ka nako e telele.
Fetisetsa lits'ebeletso tsohle ho basebetsi ba tšoanelehang. Ts'ebeletso e hlokahala ha lisebelisoa li senyehile ka tsela efe kapa efe, joalo ka thapo ea phepelo ea motlakase kapa plug e senyehile, mokelikeli o tšolohile kapa lintho li oele ka har'a lisebelisoa, sesebelisoa se pepesehetse pula kapa mongobo, ha se sebetse ka mokhoa o tloaelehileng, kapa e theotsoe.

Thepa e tla hokahana le socket socket ea MAINS e nang le khokahano e sireletsang ea lefatše.
Moo polaka ea MAINS kapa sesebelisoa se kopanyang lisebelisoa e le sesebelisoa sa ho hakolla, sesebelisoa sa ho hakolla se tla lula se sebetsa habonolo.

Ho lahlwa ka nepo ha sehlahiswa sena: Letshwao lena le bontsha hore sehlahiswa sena ha se a tshwanela ho lahlwa le ditshila tsa ka tlung, ho ya ka Taelo ya WEEE (2012/19/EU) le molao wa naha ya hao. Sehlahisoa sena se lokela ho isoa setsing sa pokello se nang le laesense ea ho sebelisoa hape ha litšila tsa lisebelisoa tsa motlakase le tsa elektroniki (EEE). Tšoaro e mpe ea mofuta ona oa litšila e ka ba le tšusumetso e mpe tikolohong le bophelong ba batho ka lebaka la lintho tse ka bang kotsi tseo ka kakaretso li amahanngoang le EEE. Ka nako e ts'oanang, ts'ebelisano ea hau ka ho lahla sehlahisoa sena ka nepo e tla kenya letsoho ts'ebelisong e ntle ea lisebelisoa tsa tlhaho. Ho fumana lintlha tse ling mabapi le moo u ka nkang lisebelisoa tsa hau tsa litšila hore li sebelisoe hape, ka kopo ikopanye le ofisi ea toropo ea heno, kapa tšebeletso ea ho bokella litšila lapeng.
Se ke oa kenya sebakeng se koaletsoeng, joalo ka mokotla oa buka kapa yuniti e ts'oanang.

Se ke oa beha mehloli ea malakabe e hlobotseng, joalo ka likerese tse bonesitsoeng, holim'a lisebelisoa.
Ka kopo hopola likarolo tsa tikoloho tsa ho lahloa ha betri. Libetri li tlameha ho lahleloa sebakeng sa pokello ea betri.

Sebelisa sesebelisoa sena libakeng tsa tropike le/kapa boemo ba leholimo bo itekanetseng.

TLHOKOMELO MOLAO

Morabe oa 'Mino ha o amohele boikarabello bakeng sa tahlehelo efe kapa efe e ka bang teng ho motho ofe kapa ofe ea itšetlehileng ka botlalo kapa ka karolo e itseng holima tlhaloso, foto kapa polelo efe kapa efe e teng mona.
Litlhaloso tsa mahlale, ponahalo le tlhaiso-leseling e ngoe li ka fetoha ntle le tsebiso.
Matshwao ohle a kgwebo ke thepa ya beng ba ona. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA le COOLAUDIO ke matshwao a kgwebo kapa matshwao a kgwebo a ngodisitsweng a MUSIC Group IP Ltd.
© MUSIC Group IP Ltd. 2018 Litokelo tsohle li bolokiloe.

TIISETSO MOEKETSI

Bakeng sa lipehelo le lipehelo tse sebetsang tsa waranti le tlhaiso-leseling e eketsehileng mabapi le Tribe ea MUSIC
Guarantee e lekantsoeng, ka kopo bona lintlha tse felletseng marang-rang ho music-group.com/warranty.

Lintlha tsa bohlokoa

Ingolise inthaneteng. Ka kopo ngolisa lisebelisoa tsa hau tsa 'Mino oa LITLHAKU TSE KHOLO hang kamora hore u li reke ka ho etela midasconsoles.com. Ho ngolisa theko ea hau u sebelisa foromo ea rona e bonolo ea inthanete ho re thusa ho sebetsana le likopo tsa hau tsa tokiso kapele le ka nepo. Hape, bala lipehelo le lipehelo tsa waranti ea rona, haeba ho hlokahala.
Ha e sebetse hantle. Haeba mohoebi oa hau ea tumello ea 'mino oa' mino oa 'mino a sa fumanehe sebakeng sa heno, o ka ikopanya le MUSIC Tribe Authorized Fulfiller bakeng sa naha ea heno e thathamisitsoeng tlasa "Ts'ehetso" ho midasconsoles.com. Haeba naha ea heno e sa ngolisoe, ka kopo sheba hore na bothata ba hau bo ka sebetsoa ke "Ts'ehetso ea Marang-rang" e kanna ea fumanoa tlasa "Ts'ehetso" ho arabella.
Ntle le moo, ka kopo romella kopo ea waranti ea inthaneteng ho midasconsoles.com PELE u khutlisa sehlahisoa.
Maqhama a Matla. Pele o hokela yuniti ka har'a sokete ea motlakase, ka kopo etsa bonnete ba hore o sebelisa matla a motlakase a nepahetsengtage bakeng sa mohlala oa hau.
Li-fuse tse fosahetseng li tlameha ho nkeloa sebaka ke li-fuse tsa mofuta o tšoanang le lintlha ntle le khethollo.

Bokaholimo ba taolo

TLHOKOMELISO / PREAMP - Fetola ea peleamp phaello bakeng sa kanale e khethiloeng e nang le taolo ea rotary ea GAIN. Tobetsa konopo ea 48 V ho kenya matla a phantom bakeng sa tšebeliso ea li-microphone tsa condenser ebe o tobetsa konopo ea to ho khutlisa karolo ea kanale. Metara ea LED e bonts'a boemo ba mocha o khethiloeng. Tobetsa konopo ea LOW CUT ebe u khetha makhetlo a batlang ho feta a phahameng ho tlosa maemo a sa batleheng. Tobetsa konopo ea VIEW konopo ho fumana lintlha tse qaqileng haholoanyane ho Main Display.
GATE / DYNAMICS - Tobetsa konopo ea GATE ho kenya heke ea lerata le ho lokisa monyako hantle. Tobetsa konopo ea COMP ho kenya konteraka le ho lokisa moeli ho latela. Ha boemo ba lets'oao methareng ea LCD bo theoha ka tlasa monyako o khethiloeng oa heke, heke ea lerata e tla khutsisa kanale. Ha boemo ba lets'oao bo fihla moeling o khethiloeng oa matla, litlhoro li tla hatelloa. Tobetsa konopo ea VIEW konopo ho fumana lintlha tse qaqileng haholoanyane ho Main Display.
EQUALIZER - Tobetsa konopo ea EQ ho kenya karolo ena. Khetha e 'ngoe ea lihlopha tsa makhetlo a mane tse nang le likonopo tsa LOW, LO MID, HI MID le HIGH. Tobetsa konopo ea MODE ho potoloha ka mefuta ea EQ e fumanehang. Matlafatsa kapa ho khaola maqhubu a khethiloeng ka taolo ea rotary ea GAIN. Khetha maqhubu a ikhethileng a lokelang ho fetoloa ka taolo ea rotary ea FREQUENCY 'me u fetole botsitso ba maqhubu a khethiloeng ka taolo ea WIDTH rotary. Tobetsa konopo ea VIEW konopo ho fumana lintlha tse qaqileng haholoanyane ho Main Display.
PUSELETSO - Hokela maekrofono oa puisano ka thapo e tloaelehileng ea XLR ka socket ea EXT MIC. Fetola boemo ba mic ea talkback ka taolo ea rotary LEAL LEVEL. Khetha sebaka sa lets'oao la ho bua ka likonopo tsa TALK A / TALK B. Tobetsa konopo ea VIEW konopo ho hlophisa tsela ea ho bua hape bakeng sa A le B.
MONITOR - Fetola boemo ba lisebelisoa tsa ho lekola ka taolo ea rotary ea MONITOR LEVEL. Fetola boemo ba li-headphone ka taolo ea rotary ea PHONES LEVEL. Tobetsa konopo ea MONO ho lekola molumo ka mono. Tobetsa konopo ea DIM ho fokotsa molumo oa lisebelisoa. Tobetsa konopo ea VIEW konopo ho fetola palo ea ho fokotsa matla hammoho le mesebetsi e meng e amanang le ho lekola.
REKOTO - Hokela memori ea kantle ho kenya lisebelisoa tsa firmware, ho jarisa le ho boloka data ea show le ho rekota lipina. Tobetsa konopo ea VIEW konopo ho fumana lintlha tse qaqileng tsa Recorder ho Main Display.
BUS E romella - Tobetsa konopo ena ho fumana lintlha tse qaqileng ho Pontšo e kholo. Fetola ka potlako bese e romelloang ka ho khetha e 'ngoe ea libanka tse' ne, e lateloe ke e 'ngoe ea taolo e tsamaellanang ea rotary tlasa Main Display.
SEBESE SE SEHOLO - Tobetsa konopo ea MONO CENTRE kapa MAIN STEREO ho fa mocha mocha oa bese e kholo ea mono kapa stereo. Ha MAIN STEREO (bese ea stereo) e khethoa, PAN / BAL e ikamahanya le boemo ba ho le letšehali ho ea ho le letona. Fetola boemo ba kakaretso ba ho romella bese ea mono ka taolo ea rotary ea M / C LEVEL. Tobetsa konopo ea VIEW konopo ho fumana lintlha tse qaqileng haholoanyane ho Main Display.
PONTSHO EA SEHOLO - Boholo ba taolo ea M32R e ka hlophisoa le ho beoa leihlo ka Main Display. Ha file ea VIEW konopo e tobetsoe ho efe kapa efe ea likarolo tsa taolo ea taolo, ke mona moo li ka bang teng viewed. Pontšo e kholo e boetse e sebelisetsoa ho fihlella litlamorao tse ka bang 60+. Sheba karolo ea 3. Pontšo e kholo.
ASSIGN - Abela litsamaiso tse 'ne tsa rotary ho mekhahlelo e fapaneng bakeng sa phihlello ea hanghang ho mesebetsi e sebelisoang hangata. Lipontšo tsa LCD li fana ka litšupiso tse potlakileng ho likabelo tsa karolo e sebetsang ea taolo ea hau. Fana ka moetlo o mong le o mong ho e robeli
FANA ka likonopo (tse 5-12) ho lipalo tse fapaneng bakeng sa ho fihlella hanghang mesebetsi e sebelisoang hangata. Tobetsa e 'ngoe ea likonopo tsa SET ho kenya tšebetsong e' ngoe ea likarolo tse tharo tsa taolo e ka sebelisoang. Ka kopo sheba ho Manual Manual bakeng sa lintlha tse ling ka taba ena.

LAYER SELECT - Tobetsa e 'ngoe ea likonopo tse latelang ho khetha lera le lumellanang le kanaleng e loketseng:
• LITLHAKU TSA 1-8, 9-16, 17-24 & 25-36 - ea pele, ea bobeli, ea boraro le ea bone ea literata tse robeli tse abetsoeng leqephe la ROUTING / HOME
• FX RET - lumella u ho fetola maemo a litla khutlela.
• AUX IN / USB - karolo ea bohlano ea liteishene tse tšeletseng le USB Recorder, le liteishene tse robeli tsa FX (1L… 4R)
• BUS 1-8 & 9-16 - sena se o lumella ho ntlafatsa maemo a 16 Mix Bus Masters, e leng molemo ha o kenyelletsa Bus Masters ho likabelo tsa DCA Group, kapa ha o kopanya libese le matrices 1-6
• REM - Konopo ea Remote ea DAW - Tobetsa konopo ena ho nolofalletsa taolo ea remoutu ea software ea hau ea Digital Audio Workstation u sebelisa sehlophisi sa karolo ea Group / Bus fader. Karolo ena e ka etsisa puisano ea HUI kapa Mackie Control Universal le DAW ea hau
• FADER FLIP - E ROMA KHONONONG YA FADER - Tobetsa ho kenya tshebetsong M32R's Sits on Fader function. Bona Referense e Potlakileng (ka tlase) kapa Buka ea mosebelisi bakeng sa lintlha tse ling.
Tobetsa konopo efe kapa efe e kaholimo ho chencha banka ea kenyo ho efe kapa efe ea likarolo tse 'ne tse thathamisitsoeng kaholimo. Konopo e tla bonesa ho bonts'a hore na ke lera lefe le sebetsang.
LITLHAKU TSA HO KENYA - Karolo ea Input Channel ea console e fana ka litselana tse robeli tse kenelletseng tsa mocha oa ho kenya. Mekhabiso e emetse likarolo tse 'ne tse arohaneng tsa kenyelletso bakeng sa khokahano, e ka fihlelloang ka' ngoe ka ho tobetsa konopo e le 'ngoe karolong ea LAYER SELECT. U tla hlahisa konopo ea SEL (khetha) ka holim'a kanale e 'ngoe le e' ngoe e sebelisetsoang ho lebisa tlhokomelo ea taolo ea sehokelo sa mosebelisi, ho kenyeletsoa le likarolo tsohle tse amanang le kanale ho kanale eo. Kamehla ho lula ho khethoa kanale e le 'ngoe.
Pontšo ea LED e bonts'a boemo ba hajoale ba molumo oa molumo ka kanale eo.
Konopo ea SOLO e arola lets'oao la molumo bakeng sa ho lekola kanale eo.
LCD Scribble Strip (e ka hlophisoang ka Pontšo e Kholo) e bonts'a kabelo ea hajoale ea kanale.
Konopo ea MUTE e fetola molumo bakeng sa kanale eo.
LITLHAKU TSA GROUP / BUS - Karolo ena e fana ka likaroloana tse robeli tsa kanale, tse abeloang e 'ngoe ea likarolo tse latelang:
• GROUP DCA 1-8 - DCA e Robeli (e Laoloang ka Marang-rang Amplifier) lihlopha
• BESE 1-8 - Kopanya benghali ba libese 1-8
• BUS 9-16 - Kopanya Masters Masters 9-16
• MTX 1-6 / MAIN C - Liphetho tsa Matrix 1-6 le bese ea Main Center (Mono).
Likonopo tsa SEL, SOLO & MUTE, ponts'o ea LED, le lesela le ngotsoeng la LCD kaofela li itšoara ka tsela e ts'oanang le ea LITLHAKU TSA HO KENYA.

MAIN CHANNEL - Sena se laola bese ea Master Output stereo mix.
Likonopo tsa SEL, SOLO & MUTE, le lesela le ngotsoeng la LCD kaofela li itšoara ka tsela e ts'oanang le ea LITLHAKU TSA INPUT.
Konopo ea CLR SOLO e tlosa mesebetsi efe kapa efe ea solo ho tsoa ho liteishene tse ling.

Ka kopo sheba ho Manual Manual bakeng sa tlhaiso-leseling e batsi ho e 'ngoe le e' ngoe ea lihlooho tsena.

Panele e ka morao

TLHOKOMELISO / LITLHAKU TSE KHOLO
hokela li-studio tsa li-studio u sebelisa lisebelisoa tsa XLR kapa ¼ ”. E kenyelletsa 12 V / 5 W lamp kgokelo.
AUX IN / OUT - Hokela ho le ho tsoa lisebelisoa tsa kantle ka ¼ ”kapa ka mehala ea RCA.
LITLHAKU TSE KHOLO 1 - 16 - Hokela mehloli ea molumo (joalo ka li-microphone kapa mehloli ea line) ka mehala ea XLR.

MATLA - The IEC mains socket le ON / OFF switch.
LITLHAHISO 1 - 8 - Romela molumo oa analoko ho lisebelisoa tsa kantle u sebelisa likhoele tsa XLR. Liphetho tsa 15 le 16 ka boiketsetso li na le matšoao a libese tsa stereo.
KARETE EA DN32-LIVE INTERFACE - Fetisetsa liteisheneng tse 32 tsa molumo ho tloha le ho tsoa khomphuteng ka USB 2.0, hape le ho rekota liteishene tse 32 ho likarete tsa SD / SDHC.

LITLHAKISO TSA TAOLO EA REMOTE - Hokela ho PC bakeng sa taolo e hole ka thapo ea Ethernet.
MIDI IN / OUT - Romella 'me u fumane litaelo tsa MIDI ka mehala ea 5-pin DIN.
ULTRANET - Hokela ho sistimi ea hau ea ho lekola, joalo ka BEHRINGER P16, ka mohala oa Ethernet.

AES50 A / B - Fetisetsa ho liteishene tse 96 ho kena le ho tsoa ka mehala ea Ethernet.

Ka kopo sheba ho Manual Manual bakeng sa tlhaiso-leseling e batsi ho e 'ngoe le e' ngoe ea lihlooho tsena.

Pontsho e ka Sehloohong

BONTS'A SENAKO

Litaolo tsa karolo ena li sebelisoa hammoho le 'mala oa skrineng ho tsamaisa le ho laola likarolo tsa lits'oants'o tseo e nang le tsona.
Ka ho kenyelletsa litsamaiso tsa rotary tse inehetseng tse tsamaellanang le litsamaiso tse haufi tse skrineng, hape le ho kenyelletsa li-button tsa motsokotso, mosebelisi a ka tsamaea le ho laola likarolo tsohle tsa skrine ea 'mala kapele.
Skrine ea 'mala e na le lipontšo tse fapaneng tse fanang ka maikutlo a bonts'ang ts'ebetsong ea konsole, hape e lumella mosebelisi ho etsa liphetoho tse fapaneng tse sa fanoeng ke li-control tsa li-Hardware tse inehetseng.

METSI / MAHOLO SOLO

Metara ena e likarolo li tharo ea likarolo tse 24 e bonts'a bophahamo ba leqhubu la audio ho tsoa beseng e kholo, hammoho le setsi se seholo kapa bese ea solo ea console.

LITLHAKU TSE KHOLO TSA KHAOLO

Likonopo tsena tse robeli tse boneselitsoeng li lumella mosebelisi ho ea hang-hang ho efe kapa efe ea li-skrini tse hloahloa tse robeli tse arabang likarolo tse fapaneng tsa khokahano. Likarolo tse ka tsamaisoang ka sekepe ke:

• LAPENG - Skrini sa HOME se na le tse fetangview ea mocha o khethiloeng oa ho kenya kapa oa tlhahiso, 'me e fana ka liphetoho tse fapaneng tse sa fumaneheng ka li-control panel tse inehetseng.
Sesepa sa HOME se na le li-tab tse arohaneng tse latelang:
lapeng: Tsela e akaretsang ea letšoao bakeng sa mocha o khethiloeng oa ho kenya kapa oa ho tsoa.
config: E lumella khetho ea mohloli oa letšoao / sebaka sa kanale, tlhophiso ea ntlha ea ho kenya, le li-setting tse ling.
Keiti: E laola le ho bonts'a phello ea heke ea seteishene ho feta tse fanoang ke li-control tsa top-panel.
lesika: Matla a laola le ho bonts'a matla a matla a kanale (compressor) ho feta a fanoang ke li-control-top-panel control.
eq: E laola le ho bonts'a kanale
Phello ea EQ ho feta e fanoang ke li-control-panel tse inehetseng. e romela: Taolo le lipontšo bakeng sa liteishene tse romelloang, joalo ka ho romella metering le ho romela ho emisa ka sehloohong: Ho laola le ho bonts'a sephetho sa kanale e khethiloeng.

• METER - Skrine ea limithara e bontša lihlopha tse fapaneng tsa limithara tsa methati bakeng sa litsela tse fapaneng tsa lipontšo, 'me e na le thuso bakeng sa ho netefatsa kapele hore na liteishene life kapa life li hloka phetoho ea boemo. Kaha ha ho na meeli e lokelang ho fetoloa bakeng sa lipontšo tsa metering, ha ho na li-skrini tsa metering tse nang le taolo ea 'tlase ea skrineng' eo ka tloaelo e ka fetoloang ke litsamaiso tse tšeletseng tsa rotary.
Sesepa sa METER se na le li-tab tse latelang tse arohaneng tsa skrini, e 'ngoe le e' ngoe e na le limithara tsa methati bakeng sa litsela tse loketseng tsa letshwao: kanale, kopanya bese, aux / fx, ka / kantle le rta.

• HO TSAMAYA - Sesebelisoa sa ROUTING ke moo lipontšo tsohle tsa matšoao li etsoang teng, ho lumella mosebelisi ho tsamaisa litsela tsa matšoao a kahare ho tloha le ho lihokelo tsa 'mele tsa ho kenya / tse hlahisang tse kamorao ho kh'amera.
Skrine ea ROUTING e na le likhaba tse latelang tse arohaneng:

lapeng: E lumella ho kenyelletsoa ha lisebelisoa tsa 'mele litsing tse 32 tsa ho kenya le ho kenya lisebelisoa tsa console. kantle ho 1-16: E lumella ho ts'oaroa ha litsela tsa matšoao a kahare liphethong tsa 16 tsa morao-rao tsa phanele ea XLR.
aux tsoa: Lumella patching tsa litsela pontšo ka hare ho tšelisa ea tse tsheletseng ka phanele "/" / RCA thusang outputs. p16 tsoa: E lumella ho ts'oaroa ha litsela tsa matšoao a kahare liphethong tse 16 tsa sephetho sa 16-channel P16 ULTRANET.
karete tsoa: E lumella ho ts'oaroa ha litselana tsa matšoao a kahare liphethong tse 32 tsa karete ea katoloso.
EA-50-AE E lumella ho ts'oaroa ha litselana tsa kahare ho liphetho tsa 48 tsa karolo e ka morao ea AES50-A.
b50-b: E lumella ho ts'oaroa ha litsela tsa matšoao a kahare ho liphetho tsa 48 tsa phanele e ka morao ea AES50-B.
xlr ka ntle: E lumella mosebelisi ho hlophisa faele ea
XLR e tsoa ka morao ho console ka li-block tse nne, ho tloha ho lisebelisoa tsa lehae, melapo ea AES, kapa karete ea katoloso.

• LIBRARI - Sesepa sa LIBRARY se lumella ho kenya le ho boloka li-setups tse sebelisoang haholo bakeng sa lisebelisoa tsa mocha, li-processor tsa litlamorao le maemo a tsela.
Sesepa sa LIBRARY se na le li-tab tse latelang:
kanale: Taba ena e lumella mosebelisi ho boloka le ho boloka metsoako e sebelisoang khafetsa ea ts'ebetso ea kanale, ho kenyeletsoa le matla le ho lekana. liphello:
Taba ena e lumella mosebelisi ho jarisa le ho boloka li-presets tsa li-processor tse sebelisoang hangata.

ho tsamaisa: Taba ena e lumella mosebelisi ho jarisa le ho boloka litselana tse sebelisoang hangata.

• LIPHELLO - Sesepa sa EFFECTS se laola likarolo tse fapaneng tsa li-processor tsa litlamorao tse robeli. Ho skrineng sena mosebelisi a ka khetha mefuta e itseng ea litlamorao bakeng sa li-processor tse robeli tsa litlamorao tsa kahare, a hlophise tsela ea tsona ea ho kenya le ho tsoa, ho lekola maemo a tsona, le ho lokisa mekhahlelo e fapaneng ea litlamorao.
Sesepa sa EFFECTS se na le likhaba tse latelang tse arohaneng:

lapeng: Skrini sa lapeng se fana ka kakaretso e akaretsangview ea litlamorao tse hlakileng, tse bonts'ang phello e kentsoeng ho e 'ngoe le e' ngoe ea marulelo a robeli, hammoho le ho bonts'a litsela tsa ho kenya / ho tsoa bakeng sa sekotjana ka seng le maemo a lets'oao la I / O.
fx1-8: Lits'oants'o tsena tse robeli tse kopilitsoeng li bonts'a tlhaiso-leseling e nepahetseng bakeng sa li-processor tse robeli tsa litlamorao tse lumellang mosebelisi ho fetola likarolo tsohle tsa sephetho se khethiloeng.

• TLHOPHISO - Sesepa sa SETUP se fana ka taolo bakeng sa ts'ebetso ea lefatše ka bophara, e phahameng, joalo ka liphetoho tsa bonts'a, samplitefiso le khokahanyo, litlhophiso tsa mosebelisi, le phetolo ea netweke.
Sesepa sa SETUP se na le li-tab tse latelang tse arohaneng:

lefatshe ka bophara: Skrine ena e fana ka liphetoho bakeng sa likhetho tse fapaneng tsa lefats'e tsa hore na konsole e sebetsa joang.
config: Sesepa sena se fana ka liphetoho bakeng sa sampLitefiso le khokahano, hammoho le ho hlophisa maemo a boemo bo holimo bakeng sa libese tsa tsela.
hole: Skrine ena e fana ka litsamaiso tse fapaneng bakeng sa ho theha konteraka e le sebaka sa taolo bakeng sa software e fapaneng ea ho rekota ea DAW khomphuteng e hoketsoeng. E hlophisa le likhetho tsa MIDI Rx / Tx.
marang-rang: Skrine ena e fana ka taolo e fapaneng ea ho hokela khokahano ho netweke e tloaelehileng ea Ethernet. (Aterese ea IP, Subnet Mask, Gateway.)
sekhahla sa mongolo: Skrine ena e fana ka taolo bakeng sa likhetho tse fapaneng tsa likhetho tsa LCD tsa console.
pele hoamps: E bonts'a phaello ea analogue bakeng sa lisebelisoa tsa mic ea lehae (XLR ka morao) le matla a phantom, ho kenyeletsoa ho seta ho tsoa holetagMabokose a e (mohlala, DL16) a hoketsoeng ka AES50.
karete: Sesepa sena se khetha ho kenya / ho hlahisa tlhahiso ea karete ea li-interface.

• MOEKETSI - E bonts'a ts'ebetso ea karolo ea MONITOR ho Main Display.
• MEKHOA - Karolo ena e sebelisetsoa ho boloka le ho hopola liketsahalo tse iketsang ka har'a komporo, ho lumella meralo e fapaneng hore e hopoloe hamorao. Ka kopo sheba ho Manual Manual bakeng sa lintlha tse ling ka taba ena.
• METE GRP - Sesepa sa MUTE GRP se lumella ho abeloa ka potlako le taolo ea lihlopha tse tšeletseng tsa limumu, mme se fana ka mesebetsi e 'meli e arohaneng:

1. E tsamaisa skrine e sebetsang nakong ea ts'ebetso ea ho fana ka liteishene ho lihlopha tse sa bueng. Sena se netefatsa hore ha ho na metjha e khutsisoang ka phoso nakong ea ts'ebetso ea kabelo nakong ea ts'ebetso ea 'mino.
2. E fana ka segokanyimmediamentsi sa sebolokigolo bakeng sa ho khutsisa / ho nyarolla lihlopha ho kenyelletsa likonopo tsa sehlopha sa limumu tse tlasa konteraka.

Tshebediso - Sesepa sa UTILITY ke skrine e tlatselletsang e etselitsoeng ho sebetsa hammoho le li-skrini tse ling tse ka bang teng view nako efe kapa efe. Sesebelisoa sa UTILITY ha se bonngoe ka bosona, se lula se le teng maemong a skrine se seng, 'me hangata se tlisa mesebetsi ea kopi, ho peista le laeborari kapa ea ho iketsetsa.

LIEKETSENG ROTARY –

Lisebelisoa tsena tse tšeletseng tsa rotary li sebelisetsoa ho fetola likarolo tse fapaneng tse kaholimo ho tsona. E 'ngoe le e' ngoe ea litsamaiso tse tšeletseng e ka sutumelletsoa kahare ho kenya ts'ebetso ea konopo. Mosebetsi ona o na le thuso ha o laola likarolo tse nang le boemo ba ho bulela / ho tima tse laoloang hantle ke konopo, ho fapana le maemo a fapaneng a ntlafatsoang hantle ke taolo ea rotary.

LIHLOOHO TSE LI TSOANG PELE / TLAS'A / LEFU / LE letona

Litaolo tsa LEFT le RIGHT li lumella ho sesa ka ho le letšehali hara maqephe a fapaneng a fumanehang ka har'a seteishene. Pontšo ea lits'oants'o e bonts'a leqephe leo u leng ho lona hona joale. Ho li-skrini tse ling ho na le mekhahlelo e mengata ho feta e ka fetoloang ke litsamaiso tse tšeletseng tsa rotary ka tlase. Maemong ana, sebelisa likonopo tsa UP le DOWN ho sheba likarolo tse ling tse fumanehang leqepheng la skrine. Ka linako tse ling likonopo tsa LEFT le RIGHT li sebelisoa ho netefatsa kapa ho hlakola li-pop-up tsa netefatso.
Ka kopo sheba ho Manual Manual bakeng sa tlhaiso-leseling e batsi ho e 'ngoe le e' ngoe ea lihlooho tsena.

Karolo e Potlakileng ea Referense

Ho fetola li-LCD tsa Strip Channel

Tšoara konopo ea khetho bakeng sa kanale eo u lakatsang ho e fetola ebe u tobetsa UTILITY.

Sebelisa li-rotary control tse ka tlase ho skrine ho fetola li-parameter.
Hape ho na le tabo e inehetseng ea Scribble Strip ho SETUP menu.
Khetha kanale ha u ntse u viewkenya skrine sena ho se hlophisa.

Ho sebelisa libese

Ho seta bese:
M32R e fana ka libese tse fetohang habonolo ha bese e 'ngoe le e' ngoe e romella e ka ikemela Pre- kapa Post-Fader, (e khethiloeng ka bobeli ba libese). Kgetha kanale ebe o tobetsa VIEW karolong ea BUS SENDS karolong ea mocha.
Hlahisa likhetho tsa Pre / Post / Subgroup ka ho tobetsa konopo ea Down Navigation ka skrini.
Ho hlophisa bese lefatšeng ka bophara, tobetsa konopo ea SEL ebe o tobetsa VIEW ho CONFIG / PREAMP karolo ea sekhechana sa mocha. Sebelisa taolo ea rotary ea boraro ho fetola maemo. Sena se tla ama liteishene tsohle tse romelloang beseng ena.

Hlokomela: Li-mix tsa libese li ka hokahanngoa ka lipara tse makatsang esita le tse haufinyane ho etsa libese tsa motsamao oa stereo. Ho hokahanya libese hammoho, khetha e le 'ngoe ebe u tobetsa konopo VIEW konopo haufi le CONFIG / PREAMP karolo ea leqhubu la mocha. Tobetsa taolo ea pele ea rotary ho hokela. Ha u romella libese tsena, taolo e makatsang ea BUS SEND e tla fetola maemo a ho romella esita le BUS SEND control rotary e tla fetola pan / balance.

Metsoako ea Matrix

Metsoako ea Matrix e ka fepeloa ka bese efe kapa efe ea Remix hammoho le bese ea MAIN LR le Center / Mono.
Ho romela ho Matrix, qala ka ho tobetsa konopo ea SEL ka holim'a bese eo u batlang ho e romella. Sebelisa li-rotary tse 'nè tsa taolo karolong ea BUS SENDS ea leqhubu la kanale. Lisebelisoa tsa Rotary 1-4 li tla romella ho Matrix 1-4.
Tobetsa konopo ea 5-8 ho sebelisa litsamaiso tse peli tsa pele tsa rotary ho li romella ho Matrix 5-6. Haeba u tobetsa VIEW konopo, o tla fumana lintlha tse qaqileng view ea Matrix a tšeletseng e romella bese e khethiloeng.

Finyella metsoako ea Matrix u sebelisa lera la bone ho lihlahisoa tse hlahisang lihlahisoa. Khetha motsoako oa Matrix molemong oa ho fihlella sekhechana sa mocha oa eona, ho kenyeletsoa le matla a nang le li-parametric EQ tse 6-band le crossover.

Bakeng sa stereo Matrix, khetha Matrix ebe o tobetsa konopo VIEW konopo ho CONFIG / PREAMP karolo ea sekhechana sa mocha. Tobetsa taolo ea pele ea "rotary" haufi le skrine ho hokela, ho etsa para ea stereo.
Hlokomela, panning ea stereo e sebetsoa ke le BUS SEND rotary control joalo ka ha ho hlalositsoe ho Sebelisa libese kaholimo.

Ho sebelisa Lihlopha tsa DCA

Sebelisa Lihlopha tsa DCA ho laola bophahamo ba liteishene tse ngata ka fader e le 'ngoe.

Ho abela kanale ho DCA, qala ka ho netefatsa hore u na le lera la GROUP DCA 1-8 le khethiloeng.
Tobetsa o tšoare konopo e khethiloeng ea DCA eo u lakatsang ho e hlophisa.
Ka nako e tšoanang, tobetsa likonopo tse khethiloeng tsa kanale eo u lakatsang ho e eketsa kapa ho e tlosa.

Ha mocha o abetsoe, konopo ea ona e khethiloeng e tla khanya ha o tobetsa konopo ea SEL ea DCA ea eona.

E romella Fader

Ho sebelisa Send on Faders, tobetsa konopo ea Send on Faders e haufi le bohareng ba konsole.
Hona joale o ka sebelisa Send On Faders ka e 'ngoe ea litsela tse peli tse fapaneng.

U sebelisa li-fader tse robeli tsa ho kenya: Khetha bese karolong ea fader e hlahisang ka ho le letona mme li-fader tsa ho kenya ka letsohong le letšehali li tla bontša motsoako o romelloang bese e khethiloeng.

U sebelisa li-fader tsa libese tse robeli: Tobetsa konopo ea khetho ea kanale ea ho kenya karolong ea ho kenya ka lehlakoreng le letšehali. Phahamisa fader ea bese ka lehlakoreng le letona la console ho romella kanale bese eo.

Limumu Groups

Ho abela / tlosa mocha ho Sehlopha sa Limumu, tobetsa konopo ea khetho ea skrineng sa MUTE GRP.
O tla tseba hore o maemong a ho hlophisa ha konopo ea MUTE GRP e bonesa le Lihlopha tse tšeletseng tsa Limumu li hlaha ho li-control tsa rotary tse tšeletseng.
Joale tobetsa 'me u tšoare e' ngoe ea likonopo tse tšeletseng tsa Sehlopha sa Limumu tseo u lakatsang ho li sebelisa 'me ka nako e le' ngoe u tobetse konopo ea SEL ea kanale eo u lakatsang ho e eketsa kapa ho e tlosa sehlopheng seo sa Mute.

Ha o qetile, tobetsa konopo ea MUTE GRP hape ho kenya likonopo tsa Mute Group tse inehetseng ho M32R.
Lihlopha tsa hau tsa Limumu li se li loketse ho sebelisoa.

Taolo e Abeloang

1. M32R e na le li-control le li-button tsa rotary tse sebelisang mosebelisi ka mekhahlelo e meraro.
Ho li abela, tobetsa konopo ea VIEW konopo karolong ea ASSIGN.
2. Sebelisa konopo ea ho tsamaea ka ho le letšehali le ka ho le letona ho khetha Sethala kapa lera la taolo. Tsena li tla tsamaellana le likonopo tsa SET A, B le C ho console.
3. Sebelisa li-rotary control ho khetha taolo le ho khetha tšebetso ea eona.
Tlhokomeliso: Lirapa tsa LCD Scribble li tla fetoha ho bonts'a litsamaiso tseo li behetsoeng tsona.

Rack ea Liphello

Tobetsa konopo ea EFFECTS haufi le skrine ho bona ho fetaview ea li-processor tse robeli tsa litlamorao tsa stereo. Hopola hore litlamorao tsa 1-4 ke tsa litlamorao tsa mofuta oa Send, 'me likhahla tsa 5-8 ke tsa litlamorao tsa mofuta oa Insert.
Ho hlophisa phello, sebelisa taolo ea rotary ea botšelela ho khetha sekhahla sa litlamorao.
Ha sekhetho sa likhetho se ntse se khethoa, sebelisa taolo ea bohlano ea rotary ho fetola hore na ke phello efe ho slot eo, 'me u netefatse ka ho tobetsa taolo.
Tobetsa taolo ea rotary ea botšelela ho hlophisa likarolo tsa seo.

Liphello tse fetang 60 li kenyelletsa Maele, Ho lieha, Chorus, Flanger, Limiter, 31-Band GEQ, le tse ling.
Ka kopo sheba ho Manual Manual bakeng la lenane le felletseng la ts'ebetso.

Lisebelisoa tsa Firmware le Rekoto ea USB Stick

Ho Ntlafatsa Firmware:

Khoasolla firmware e ncha ho tsoa leqepheng la sehlahisoa sa M32R ho ea boemong ba motso oa memory memory ea USB.

Tobetsa o tšoare likarolo tsa RECORDER VIEW konopo ha u ntse u bulela konopo ho kenya mokhoa oa ntlafatso.
Tšoaea molamu oa memori oa USB kaholimo ho sehokelo sa USB.
M32R e tla emela hore drive ea USB e lokele ebe e sebelisa sesebelisoa sa firmware se ikemetseng ka botlalo.

Ha drive ea USB e sa khone ho itokisa, ntlafatso e ke ke ea khonahala mme re khothaletsa ho tima konopo hape ho bulela firmware e fetileng.
Ts'ebetso ea ntlafatso e tla nka metsotso e 'meli ho isa ho e meraro ho feta tatellano ea boot e tloaelehileng.

Ho Rekota ho USB Stick:

Kenya USB Stick koung ea RECORDER ebe u tobetsa konopo ea VIEW konopo.
Sebelisa leqephe la bobeli ho hlophisa sehatisi.
Tobetsa taolo ea bohlano ea rotary tlasa skrine ho qala ho rekota.

Sebelisa taolo ea pele ea rotary ho emisa. Emela lebone la ACCESS hore le time pele u tlosa molamu.

Lintlha: Thupa e tlameha ho hlophisoa bakeng sa sistimi ea FAT fi le. Nako e kahodimodimo ya ho rekota e batla e le dihora tse tharo bakeng sa mollo ka mong, ka moedi wa boholo ba 2 GB. Ho rekota ho 16-bit, 44.1 kHz kapa 48 kHz ho latela console sample sekhahla.

Setšoantšo se Thibeloang

Litlhaloso tsa Tekheniki

Ho sebetsa

Litsela tsa ho kenya letsoho	Litsela tse 32 tsa ho kenya, Litsela tse 8 tsa Aux, Litsela tse 8 tsa ho Khutlisa tsa FX
Litsela tsa Phatlalatso ea Khumo	8 / 16
Libese tse 16, matrices a 6, LRC e kholo	100
Lienjineri tsa kahare (True Stereo / Mono)	8 / 16
Pontšo ea ka hare ea li-automation (li-Cue / Snippets tse hlophisitsoeng)	500 / 100
Likarolo tsa ka hare tsa kakaretso tse ka hare (inc. Peleamplifiers le Faders)	100
Tshebetso ea Letshwao	Sebaka se Phaphameng sa 40-Bit
Phetoho ea A / D (8-kanale, 96 kHz e loketse)	24-Bit, 114 dB Dynamic Range, A-boima
Phetoho (stereo, 96 kHz e loketse)	24-Bit, 120 dB Dynamic Range, A-boima
Latency ea I / O (Keletso ea Console ho Phallo)	0.8 ms
Latency ea Marangrang (StagLebokose In> Console> S.tagE Box Out)	1.1 ms

Lihokelo

Microphone ea Series Series ea MIDAS PRO Peleampsefofane (XLR)	16
Keletso ea Microphone ea Talkback (XLR)	1
Lits'ebetso / Lintho tsa RCA	2 / 2
Litholoana tsa XLR	8
Litholoana tsa ho Lekola (XLR / ¼ ”TRS e Leka-lekane)	2/2
Litheko / Liphetho tsa Aux (¼ ”TRS e leka-lekaneng)	6 / 6
Lits'oalo tsa Mehala (¼ ”TRS)	1 (stereo)
Likepe tsa AES50 (KLARK TEKNIK SuperMAC)	2
Sebopeho sa Karete ea Katoloso	32 Channel Audio Keletso / di neng di kwalwa
Sehokedi sa ULTRANET P-16 (Ha ho Matla a Fanoang)	1
Liphumano / Liphetho tsa MIDI	1 / 1
Mofuta oa USB A (Audio le Data Import / Export)	1
Mofuta oa B oa USB, karolo e ka morao bakeng sa taolo e hole	1
Ethernet, RJ45, karolo e ka morao, bakeng sa taolo e hole	1

Litšobotsi tsa ho kenya Mic

Design	MIDAS PRO Series
THD + N (phaello ea 0 dB, tlhahiso ea 0 dBu)	<0.01% ha e na boima
THD + N (+40 dB phaello, 0 dBu ho +20 dBu tlhahiso)	<0.03% ha e na boima
Input Impedance (E sa leka-lekanang / e leka-lekaneng)	Tse 10 kΩ / 10 kΩ
Boemo ba Keketso e sa Buoang Boholo	+23 dBu
Matla a Phantom (switchable per input)	+ 48 V
Lerata le lekanang la Input @ +45 dB (150 Ω mohloli)	-125 dBu 22 Hz-22 kHz, e sa imeloang
CMRR @ Unity Gain (Tloaelehileng)	> 70dB
CMRR @ 40 dB Ho Fumana (Tloaelehileng)	> 90dB

Litšobotsi tsa ho kenya / ho tsoa

Kakaretso ea Karabo @ 48 kHz S.ample Rate	0 dB ho -1 dB 20 Hz - 20 kHz
Palo ea Matla, Analogue In to Analogue Out	106 dB 22 Hz - 22 kHz, ha e na boima
Palo ea Matla a A / D, Peleamplifier le Converter (Tloaelehileng)	109 dB 22 Hz - 22 kHz, ha e na boima
D / A Dynamic Range, Converter le Output (Tloaelehileng)	109 dB 22 Hz - 22 kHz, ha e na boima
Khahlanong le Crosstalk @ 1 kHz, Litsela tse Haufi	100dB
Boemo ba tlhahiso, XLR lihokedi (Ka lebitso / Boholo)	+4 dBu / + 21 dBu
Impedance ea Phallo, Lihokelo tsa XLR (Tse sa Lekaneng / Tse leka-lekaneng)	50 Ω / 50 Ω
Phallo ea ho kenya, TRS Connectors (E sa leka-lekanang / e leka-lekaneng)	Tse 20 kΩ / 40 kΩ
Nete ea ho Kena e sa reng letho, Lihokelo tsa TRS	+21 dBu
Boemo ba ho tsoa, TRS (Ka lebitso / Boholo)	+4 dBu / + 21 dBu
Tlhahiso ea Impedance, TRS (E sa leka-lekanang / e leka-lekaneng)	50 Ω / 50 Ω
Mehala ea Phallo ea Phallo / Boemo bo phahameng ba tlhahiso	40 Ω / +21 dBu (tsa stereo)
Lebelo la Lerata le Setseng, Kantle ho 1-16 XLR Lihokedi, Bonngoe bo Fumana	-85 dBu 22 Hz-22 kHz, e sa imeloang
Maemo a lerata a salletseng, kantle ho 1-16 XLR lihokelo	-88 dBu 22 Hz-22 kHz, e sa imeloang
Lekala la Lerata le Setseng, TRS le Monitor tsoa XLR Lihokedi	-83 dBu 22 Hz-22 kHz, e sa imeloang

Sesebelisoa sa USB sa DN32-LIVE

Lebelo le phahameng la USB 2.0, mofuta-B (sebopeho sa audio / MIDI)	1
Litsela tsa ho kenya / tsa tlhahiso tsa USB, duplex	32, 16, 8, 2
Lisebelisoa tsa Windows DAW (ASIO, WASAPI le WDM interface ea sesebelisoa sa audio)	Fumana 7 32/64-bit, Win10 32/64-bit
Likopo tsa Mac OSX DAW (Intel CPU feela, ha ho tšehetso ea PPC, CoreAudio)	Mac OSX 10.6.8 **, 10.7.5, 10.8, 10.9, 10.10, 10.11, 10.12

Sebopeho sa DN32-LIVE SD Card

Likarete tsa SD, SD / SDHC	2
SD / SDHC e ts'ehetsoa file tsamaiso	FAT32
Bokhoni ba karete ea SD / SDHC, sekotjana ka seng	1 ho isa ho 32 GB
Leshala bakeng sa motlakase o tima tšireletso (ha o ikhethela)	CR123A Lithium sele
Litsela tsa ho kenya / ho kenya karete ea SD	32, 16, 8
Samplitefiso (hora ea console)	44.1 kHz / 48 kHz
Sample bolelele ba lentsoe	PCM e 32 hanyane
File fomati (liteishene tse ngata tse sa hatelloang)	Litsela tsa WAV 8, 16 kapa 32
Nako e phahameng ea ho rekota (32 ch, 44.1 kHz, 32-bit ho li-media tse 32 GB SDHC)	200 mets
Ts'ebetso e tloaelehileng ea ho rekota kapa ho bapala	Likanale tse 32 mecheng ea litaba ea sehlopha sa 10, liteishene tse 8 kapa tse 16 mecheng ea litaba ea sehlopha sa 6

Pontšo

Sekrine se seholo	5, TFT LCD, 800 x 480 Qeto, 262k Colours
Sesebelisoa sa LCD sa Channel	128 x 64 LCD e nang le RGB Colourlightlight
Metara e ka sehloohong	Karolo ea 18 (-45 dB ho Clip)

Ea nama

Standard sebetsa Mocheso Range	5°C – 40°C (41°F – 104°F)
Litekanyo	478 x 617 x 208 mm (18.8 x 24.3 x 8.2″)
Boima ba 'mele	14.3 lik'hilograma (31.5 lbs)

Litokomane / Lisebelisoa

MIDAS Digital Console bakeng sa Live le Studio e nang le liteishene tse kenyelelitsoeng tse 40, 16 MIDAS PRO [pdf] Bukana ea Mosebelisi
Digital Console bakeng sa Live Studio 40 Ho kenya lihanele 16 MIDAS PRO Microphone Preamplifi ers 25 Remix Libese Live Live Multitrack Record, M32R LIVE

Litšupiso

Bukana ea Mosebelisi

Digital Console ea Live le Studio e nang le Litsela tse 40 tsa ho Kena, 16 MIDAS PRO

Litaelo tsa Bohlokoa tsa Tšireletso