MICROCHIP Silicon Sculptor 4 Conformance Test

Selelekela

Karete ena ea ho qala ka potlako e sebetsa ho Microchip Silicon Sculptor 4 (SS4). Silicon Sculptor 4 ke sesebelisoa sa mananeo sa FPGA se hlomelletsoeng ho fana ka lisebelisoa tse phahameng tsa data le ho khothaletsa tšebeliso e bonolo. E kenyelletsa puisano ea libese ea maemo a holimo ea USB v2.0 e amoheloang ka bophara. Ke lenaneo le tšepahalang haholo bakeng sa potefolio ea Microchip ea FPGAs.

Tlhophiso ea Pele ea Silicon Sculptor 4
Ho etsa setup sa pele sa Silicon Sculptor 4, etsa mehato e latelang:

1. Khoasolla mofuta oa morao-rao oa software ea Silicon Sculptor (SculptW) ho tsoa ho Microchip websebaka.
2. Kenya SculptW u sebelisa ho kena ha admin ebe u qala PC hape.
3. Hokela sesebelisoa sa motlakase sa 24V se tsamaeang le sesebelisoa.
   Haeba motlakase o tsamaeang le ona o lahlehile kapa o senyehile, ikopanye le Microchip bakeng sa e 'ngoe. Ho sebelisa motlakase o sa lumellaneng ho ka baka tšenyo ho moetsi oa lenaneo.
4.  Ka morao ho moetsi oa lenaneo, hokela thapo ea USB ho boema-kepe ba USB ba mofuta oa B.
5. Hokela thapo ea USB ho thaepa-A boema-kepe ba USB ho PC. Ho netefatsa ts'ebetso ea mokhanni, sheba lintlha tse skrineng.
   Bohlokoa: The Found New Hardware Wizard e qala bakeng sa SS4 programmer e hokahantsoeng. Kamora ho kenya li-driver tsa USB, PC ea hlokomela hore sebaka sa SS4 sa mananeo se hokahane hamorao. Haeba ho sebelisoa boema-kepe bo fapaneng ba USB ho PC, Found New Hardware Wizard e qala ebe e kenya li-driver tse ncha tsa USB.
6. Kamora ho kenya mokhanni oa USB, tlanya Qetella.
   Setšoantšo sa 1-1. Motsamaisi oa Sesebelisoa ka mor'a ho kenya Mokhanni oa USB
7. Netefatsa hore li-drivers tsohle tsa USB li kentsoe ka nepo, li amoheloa ke Windows®. Liwebsaete tsa mohlophisi li tla thathamisoa ho Windows Device Manager. Etsa mehato e latelang ho netefatsa bakhanni ba USB:
   • Eya ho Motsamaisi oa Sesebelisoa.
     BPM Microsystems e hlaha lenaneng joalo ka ha ho bonts'itsoe setšoantšong se fetileng.
   • Eketsa node ea BPM Microsystems.
     Ho tlameha hore ho be le sebaka sa "programmer" sa BPM Microsystems bakeng sa moqapi ea khomaretsoeng.

Ho matlafatsa sebatli

Ho matlafatsa sebatli, etsa mehato e latelang:

TLHOKOMELO
Ha u sebelisa sesebelisoa sena, latela mekhoa ea thibelo ea ESD. Li-module tsa li-adapter le lisebelisoa li ka ba bonolo ho ESD.

1. Silicon Sculptor 4 ha e na sesebelisoa sa ho ON/OFF sa matla. Hokela phepelo ea motlakase e tsamaeang le sebatli.
2. Ka morao ho moetsi oa lenaneo, hokela thapo ea USB ho boema-kepe ba USB ba mofuta oa B.
3. Hokela thapo ea USB ho thaepa-A boema-kepe ba USB ho PC.
4.  Ho qala software ea SculptW, tobetsa habeli letšoao la desktop la SculptW kapa u ee ho Windows Start> Lenane la Mananeo ebe u khetha letšoao la SculptW. Ha o sebelisa software lekgetlo la pele kamora ho kenya, tsamaisa sesebelisoa joalo ka motsamaisi.

Sebapali se fana ka matla.
Lisebelisoa tsa LED li bulela nako e khuts'oane ha software e ntse e qalisoa. Leseli le letala la LED le tlameha ho lula le lutse ka mor'a hore ts'ebetso ea ho qala e phethoe. Haeba sebatli se sa sebetse, koala software 'me u hlahlobe likhokahano tsa USB le matla (le/kapa sebelisa boema-kepe bo bong ba USB ba komporo) ebe u leka hape. Sheba skrine ea software ho netefatsa hore software e lemoha moqapi. Mojule oa programmer le adapter (haeba o khomaretsoe ho moqapi) o tlameha ho hlaha bareng ea boemo botlaaseng ba software ea SculptW.

Ho Lekola Lenaneo

Pele o hlophisa FPGA efe kapa efe, o tlameha ho etsa liteko tse peli: tlhahlobo ea tlhahlobo ea mananeo (sheba karolo ea Perform Programmer Diagnostics Test) e lateloang ke netefatso ea tlhahlobo ea calibration (bona karolo ea Verification of Calibration Procedure). Teko ea tlhahlobo ea mananeo e tlameha ho etsoa makhetlo a mabeli — ka mojule oa adaptara ea lenaneo le ntle le eona. Teko ea tlhahlobo ea mananeo e tlameha ho feta le ntle le mojule oa adaptara ea mananeo. Haeba u na le liphoso nakong e 'ngoe ea liteko tse peli, emisa ho sebelisa Programmer mme u ikopanye le Microchip
Ts'ehetso ea Tech (Fana ka log file ho tsoa ho C: BP\DATALOG foldareng). Bakeng sa lenane le felletseng la mojule oa adaptara ea mananeo, sheba SILICON -SCULPTOR -ADAPTOR-MODULE.
Haeba liteko ka bobeli li feta, tsoela pele ho Verification of Calibration Procedure.
Pele o sebelisa sebatli lekgetlo la pele, tlhahlobo ea netefatso ea calibration e tlameha ho etsoa. Pele o hlophisa sehlopha sefe kapa sefe sa RT FPGAs, o tlameha ho etsa tlhahlobo ena.

Hardware e Hlokahala ho Etsa Teko ea Netefatso ea Calibration
Lintlha tse latelang li hlokahala bakeng sa tlhahlobo ena:

• Sebapali sa SS4

• Phepelo ea motlakase e fanoang le moetsi oa lenaneo (Se ke oa sebelisa motlakase oa hau.)
• SM48D kapa SM48DB adaptara module
• Voltmeter
• Oscilloscope

Etsa Tlhahlobo ea Tlhahlobo ea Programmer

Ho etsa tlhahlobo ea tlhahlobo ea li-programmer, latela mehato ena:

1. Hokela SS4 programmer ho PC u sebelisa thapo ea USB.
   Tlhokomeliso: Lenaneo le tlameha ho tima nakong ea mohato o latelang.
2. Hokela phepelo ea motlakase ho SS4 programmer le motlakase.
3. Kenya mofuta oa morao-rao oa software ea SculptW komporong ea hau haeba e so kengoa.
4. Qala software ea SculptW. Emela hore moetsi oa lenaneo a matlafatse. Li-program tsa LED li bulela nako e khuts'oane ha software e ntse e qalisoa, empa lebone le letala la LED le tlameha ho lula le bulehile kamora hore ts'ebetso ea ho qala e phetheloe. Haeba sebatli se sa sebetse, koala software, hlahloba likhokahano tsa USB le matla, ebe u leka hape.
5. Ntle le ho kenya mojule oa adaptara ea lenaneo ho SS4 programmer, ea ho Tools> Programmer Diagnostics 'me u tsamaise tlhahlobo ea tlhahlobo ea mananeo.Ho hlaha pop-up ea Self Test Configuration.
   Setšoantšo sa 1-4. Self Test Configuration Pop-up
6. Ho tsoela pele, tobetsa OK ebe u emela hore tlhahlobo e phethe.

Tlhokomeliso: Haeba u ntse u hlophisa FPGA, pheta mohato oa 5 kamora ho hokela mojule oa adaptara ea lenaneo.

Netefatso ea Ts'ebetso ea Calibration
Pele a tsoela pele ho netefatso ea li-programmer tsa tlhahlobo ea calibration, moqapi o tlameha ho feta tlhahlobo ea tlhahlobo ntle le module ea adaptara.
Ho netefatsa calibration, etsa mehato e latelang:

1. Beha SM48D kapa SM48DB ho SS4 programmer, bona setšoantšo se latelang.
   Setšoantšo sa 1-5. SM48D kapa SM48DB ho SS4 ProgrammerTlhokomeliso: Netefatsa hore u ela hloko sebaka sa phini 1 (Pini ea teko) le 48 (GND) ea mojule oa adaptara ea SM48D/SM48DB (sheba setšoantšo se latelang) ha likhoele tsena li etsa molumo oa 'nete.tage le litekanyo tsa waveform.
   Setšoantšo sa 1-6. Test Pin le GND Pin
2. Tobetsa letšoao la sesebelisoa ebe u thaepa BP sebakeng sa Batla: tšimo.
3. Khetha khetho ea BP Microsystems SS4 Setifikeiti sa Teko ea Conformance ebe o tobetsa Khetha.
   Setšoantšo sa 1-7. BP Microsystems SS4 Setifikeiti sa Khetho ea Teko ea Conformance
4. Hang ha e khethiloe, fensetere e latelang e tla hlaha e hlalosang mokhoa oa ho etsa tlhahlobo. Ho koala fensetere ena, tobetsa konopo ea Enter.
   Setšoantšo sa 1-8. Leka Matha Litaelo Fesetereng
5. Hokela lisebelisoa tsa voltmeter ho pins 1 le 48.
   Tlhokomeliso: Netefatsa tlhokomelo e khethehileng ho qoba ho khutsufatsa pin 1 le pin 48.
6. Ho qala tlhahlobo, ho software, tobetsa konopo ea Phethahatso.

Phahameng Voltage Teko

Ho etsa matla a phahamengtagE le teko, latela mehato ena:

1.  Lekanya bophahamo ba modumotage ea pin 1, sheba setšoantšo se latelang. Moqtag'malo oa e tlameha ho ba ka har'a sebaka se boletsoeng. Ho seng joalo, sebatli ha se sebetse hantle 'me se hloka litšebeletso.
   Setšoantšo sa 1-9. Ho lekanya Moqtage ea Pin 1Setšoantšo se latelang se bontša sebaka se lumelletsoeng sa molumo o phahamengtage teko.
   Setšoantšo sa 1-10. Sephetho sa Teko—Moqtage Teko
2. Ho fetela tekong e latelang, ho sebatli sa SS4, tobetsa konopo ea Start push.

Moqolo o tlasetage Teko

Ho etsa molumo o tlasetagE le teko, latela mehato ena:

1. Lekanya bophahamo ba modumotage ea pin 1, sheba setšoantšo se latelang. Moqtag'malo oa e tlameha ho ba ka har'a sebaka se boletsoeng. Ho seng joalo, sebatli ha se sebetse hantle 'me se hloka litšebeletso.
   Setšoantšo sa 1-11. Lekanya Moqtage ea Pin 1Setšoantšo se latelang se bontša sebaka se lumelletsoeng sa molumo o tlasetage teko.
   Setšoantšo sa 1-12. Sephetho sa Teko—Moqtage Teko
2. Tlosa lithapo tsa probe tsa voltmeter ho mojule oa adaptara ea SM48D.
   Tlhokomeliso: Netefatsa tlhokomelo e khethehileng ho qoba ho khutsufatsa pin 1 le 48.
3. Hokela scope probe ho pin 1 mme o theohe ho pin 48.
   Lintlha:
   • Netefatsa hore o ela hloko ho qoba ho khutsufatsa pin 1 le 48.
   • Se ke oa hokela phini ea fatše ea scope ho penya 1 ea mojule oa adaptara ea SM48D.
4.  Ho fetela tekong e latelang, ho sebatli sa SS4, tobetsa konopo ea Start push.

Teko ea Maqhubu a Tlase
Ho etsa tlhahlobo ea maqhubu a tlase, latela mehato ena:

1. Beha probe voltage ea oscilloscope ho 2V/Div.
2. Fetola nako ho bona nako eohle ea maqhubu, sheba setšoantšo se latelang.
   Setšoantšo sa 1-13. Nako eohle ea Leqhubu
3. Lekanya maqhubu a nako e le 'ngoe ea foromo ea maqhubu. Maqhubu a lekantsoeng a tlameha ho ba ka har'a sebaka se boletsoeng. Ho seng joalo, sebatli ha se sebetse hantle 'me se hloka litšebeletso. Palo e latelang e bonts'a mofuta o lumelletsoeng oa tlhahlobo ea maqhubu a tlase.
   Setšoantšo sa 1-14. Sephetho sa Teko - Teko ea Maqhubu a Tlase
4. Ho fetela tekong e latelang, ho sebatli sa SS4, tobetsa konopo ea Start push.

Teko ea Bophara ba Pulse
Ho etsa tlhahlobo ea pulse wide, latela mehato ena:

1. Ho tšoara lets'oao pheletsong e ntseng e phahama ea lets'oao, seta "trigger" ea oscilloscope.
2. Lekanya bophara ba pulse. Bophara ba ho otla ha pelo bo tlameha ho ba ka har'a sebaka se boletsoeng. Ho seng joalo, sebatli ha se sebetse hantle 'me se hloka litšebeletso.
   Setšoantšo sa 1-15. Pulse WidthSetšoantšo se latelang se bontša mofuta o lumelletsoeng oa teko ea bophara ba pulse.
   Setšoantšo sa 1-16. Sephetho sa Teko-Teko ea Bophara ba Pulse
3. Ho emisa tlhahlobo, ho sebatli sa SS4, tobetsa konopo ea Start push.
4. Tlosa li-probe tsa liteko ho mojule oa adaptara ea SM48D.
5. Ho netefatsa hore ha ho na ts'enyehelo ea mohlophisi nakong ea netefatso ea tlhahlobo ea calibration, etsa tlhahlobo ea tlhahlobo ea mananeo ka SM48D.
   Setšoantšo sa 1-17. Sephetho sa Teko ea Diagnostics ea Programmer ka SM48D
6. Ho tsoa ho Sculptor Software, koala fensetere ea eona kapa u ee ho File ebe o tobetsa Tloha. Ka nako ena, programmer e tima.

Ho hlophisa sesebelisoa

Ho hlophisa sesebelisoa, latela mehato ena:
Tlhokomeliso: Pele u sebetsana le likarolo tsa ESD, hokela terapo e theohileng letsohong la letsoho la hao le khokahanyo ea antistatic ka lehlakoreng la moetsi oa lenaneo.

1. Tobetsa Sesebelisoa.
   Setšoantšo sa 1-18. Fesetere ea Khetho ea Sesebelisoa
2. Khetha sesebelisoa se reriloeng ho tsoa lethathamong.
   Setšoantšo sa 1-19. Sesebediswa le Data Pattern (Programming File) Khetho
3. Tobetsa Data Pattern.
   • Ho bula a file, tobetsa Open.
   • Ho batla a file, tobetsa Browse.
   • Khetha ea file ho jarisa.
   • Khetha li-setting tse loketseng.
   • Tobetsa Open.
   • Tobetsa OK.
   • Tobetsa OK.
     Setšoantšo sa 1-20. Loading Programming File
4. Ho "Program" tab, khetha litlhophiso tse nepahetseng bakeng sa ts'ebetso ea sesebelisoa.
   Setšoantšo sa 1-21. Lethathamo la Lenaneo
5. Lebaleng la Bongata, khetha palo ea lisebelisoa tseo u lokelang ho li hlophisa.
   • Beha sesebelisoa sa pele mojuleng oa adaptara ea mananeo.
   • Tobetsa Lenaneo.
   • Haeba sebaka sa bongata se behiloe ho feta e le 'ngoe, ho SS4 programmer, tobetsa konopo ea QALA.
     Setšoantšo sa 1-22. QALA Konopo ea ho Tobetsa
6. Ka mor'a hore Pass e tala kapa e khubelu ea Fail LED e khantšitsoe, beha sesebelisoa se seng (haeba sebaka sa bongata se le seholo ho feta 1) mojuleng oa adapter ea lenaneo.
7.  Ho sebatli, tobetsa konopo ea START START.
   Setšoantšo se latelang se bontša se hlahisoang ka mor'a ho hlophisa sesebelisoa.
   Setšoantšo sa 1-23. Sehlahisoa-Sesebelisoa sa Lenaneo

Ho sebetsana le ho hloleha ha mananeo
Haeba ho na le ho hloleha hofe kapa hofe ha mananeo kantle ho tataiso e fanoeng ho Tataiso ea Mosebelisi ea Mananeo le Ts'ebetso ea Ts'ebetso, theha nyeoe ea tšehetso ea thekenoloji ho tšehetso ea Microchip mme o hokele lethathamo la mananeo (C:\BP\DATALOG) nyeoeng.

Boitsebiso ba Microchip

Matšoao a khoebo
Lebitso la "Microchip" le logo, "M" logo, le mabitso a mang, li-logo, le li-brand ke matshwao a khoebo a ngolisitsoeng le a sa ngolisoang a Microchip Technology Incorporated kapa mekhatlo e amanang le eona le/kapa lithuso tsa United States le/kapa linaheng tse ling ("Microchip). Matshwao a kgwebo”). Tlhahisoleseding e mabapi le Microchip Trademarks e ka fumanoa ho https://www.microchip.com/en-us/about/legal-information/microchip-trademarks .

• ISBN: 979-8-3371-1262-6

Tsebiso ea Molao
Khatiso ena le lintlha tse mona li ka sebelisoa feela le lihlahisoa tsa Microchip, ho kenyeletsoa ho rala, ho leka, le ho kopanya lihlahisoa tsa Microchip le kopo ea hau. Tšebeliso ea tlhahisoleseling ena ka tsela efe kapa efe e tlola melaoana ena. Lintlha mabapi le lits'ebetso tsa sesebelisoa li fanoe molemong oa hau feela 'me li ka nkeloa sebaka ke liapdeite. Ke boikarabello ba hau ho netefatsa hore kopo ea hau e kopana le litlhaloso tsa hau. Ikopanye le ofisi ea thekiso ea Microchip ea lehae bakeng sa tšehetso e eketsehileng kapa, fumana tšehetso e eketsehileng ho www.microchip.com/en-us/support/design-help/client-support-services.
TSEBISO ENA E FUMANA KE MICROCHIP "JOALOKAHA E LE". MICROCHIP HA E ETSE LITLHAHISO KAPA LITIISETSO TSA MOFUTA OFE kapa Ofe Ebang E BONAHALA KAPA E BONAHALA, E NGOLOA KAPA MOLOMO, MOLAO KAPA HANG-HANG, E Amanang le tlhahisoleseding e kenyellelitsoeng EMPA E SA LEkanyetsoa HO EFE KAOFELA TIISETSO, TLHOKOMELISO, TLHOKOMELISO, TLHOKOMELISO LE TLHAHISO. MORERO OA RONA, KAPA LITIISETSO E Amanang le MAEMO, BOLEMO, KAPA KETSAHALO EA EONA. HA HO LE TSATSAHALO, MICROCHIP E TLA BA MOTHO OA MOLATO BAKENG SA LITABA LIFE, TSE KHETHEHILENG, TSA KOTSO, TSATSAHALO, KAPA TAHLEHELO E LATELANG, TŠENYEHO, LITŠEnyehelo, KAPA LITJEHO TSA MOFUTA OO O MANG KAPA O MANG LE LITSEBISO KAPA TŠEBELETSO EA LONA, LE HO KA ETSAHALA KETSAHALO E ETSANG. TSE KA E KA ETSAHANG KAPA MESEKO E BONAHALA. HO FIHLELA KA BOKGOLO KA HO FETISISA KA MOLAO, BOIKARABELO KAOFELA BA MICROCHIP HO LIKELETSO KAOFELA KA TSELA EFE KAPA E MABAPI LE BOITSEBISO KAPA TŠEBELETSO EA YONA E KE KE EA FEELA BOLIMO BA LITEFO, HAEBA LI LE TENG, TSEO O LI LEFILENG KA THOHLO HO ETSA TSEBISO.
Tšebeliso ea lisebelisoa tsa Microchip ts'ehetso ea bophelo le/kapa lits'ebetso tsa ts'ireletso e kotsing ea moreki, 'me moreki o lumela ho sireletsa, ho qosa le ho boloka Microchip e se nang kotsi ho tsoa lits'enyehelo tsohle, likopo, lisutu, kapa litšenyehelo tse bakoang ke ts'ebeliso e joalo. Ha ho lilaesense tse fetisoang, ka mokhoa o hlakileng kapa ka tsela e 'ngoe, tlasa litokelo life kapa life tsa thepa ea mahlale a Microchip ntle le ha ho boletsoe ka tsela e ngoe.

Karolo ea Tšireletso ea Khoutu ea Lisebelisoa tsa Microchip
Ela hloko lintlha tse latelang tsa ts'ireletso ea khoutu lihlahisoa tsa Microchip:

• Lihlahisoa tsa Microchip li kopana le litlhaloso tse fumanehang ho Microchip Data Sheet ea bona.
•  Microchip e lumela hore lihlahisoa tsa eona li sireletsehile ha li sebelisoa ka mokhoa o reriloeng, ka har'a litlhaloso tsa ts'ebetso, le tlas'a maemo a tloaelehileng.
• E boloka boleng ba Microchip mme ka mabifi e sireletsa litokelo tsa eona tsa thepa ea mahlale. Boiteko ba ho tlola likarolo tsa ts'ireletso ea khoutu ea lihlahisoa tsa Microchip bo thibetsoe ka thata mme bo ka tlola Digital Millennium Copyright Act.
• Ha ho Microchip kapa moetsi ofe kapa ofe oa semiconductor ea ka netefatsang ts'ireletso ea khoutu ea eona. Tšireletso ea khoutu ha e bolele hore re tiisa hore sehlahisoa "se ke ke sa robeha". Tšireletso ea khoutu e lula e fetoha. Microchip e ikemiselitse ho tsoela pele ho ntlafatsa likarolo tsa ts'ireletso ea khoutu ea lihlahisoa tsa rona.

Reference Inthaneteng
© 2025 Microchip Technology Inc. le makalana a eona

LBH

• P: Ke lokela ho etsa eng haeba moetsi oa lenaneo a sa fane ka matla?
  A: Lekola likhokahano tsa USB le matla, etsa bonnete ba ho kenya li-driver tsa USB ka nepo, 'me u leke ho sebelisa boema-kepe bo fapaneng ba USB ho PC. Haeba mathata a ntse a tsoela pele, ikopanye le ts'ehetso.

Litokomane / Lisebelisoa

MICROCHIP Silicon Sculptor 4 Conformance Test [pdf] Bukana ea Mosebelisi Silicon Sculptor 4 Conformance Test, Sculptor 4 Conformance Test, Conformance Test

Litšupiso

• Bukana ea Mosebelisi