MICROCHIP AN4682 Polar Fire FPGA Mocheso le Moqtage Sensor

Tlhahisoleseding ya Sehlahiswa

Litlhaloso:

• Lebitso la Sehlahisoa: PolarFire FPGA Mocheso le Moqtage Sensor
• Likarolo: Mocheso le Moqtage Sensor tlaleha mocheso oa lefu le voltage ea lisebelisoa tsa lisebelisoa ka mokhoa oa dijithale ho \ lesela la FPGA
• Phethahatso: 4-channel ADC

Litaelo tsa Tšebeliso ea Sehlahisoa

1. Ho matha Demo

Ho tsamaisa demo e totobatsang tšobotsi ea TVS ea PolarFire o sebelisa sesebelisoa se thehiloeng ho UART (GUI), latela mehato ena:

1. Netefatsa hore o na le hardware le software tse hlokahalang tse thathamisitsoeng karolong ea Litlhoko tsa Moralo.
2. Khoasolla moralo oa demo files ho tsoa sehokelong se fanoeng.
3. Kenya Libero SoC ho PC e amohelang joalo ka ha ho bonts'itsoe ho websebaka sa moralo ona.
4. Bula moralo oa Libero ho bona lintlafatso le litlhophiso tsa morao-rao.
5. Etsa moralo oa demo ho latela litaelo tse fanoeng.

2. Litlhoko tsa Moralo

Pele o sebelisa demo, etsa bonnete ba hore o na le lisebelisoa tse latelang le software:

Tlhokahalo	Mokhoa oa tšebetso	Lisebelisoa	Software
Phetolelo	64-bit Windows 7, 8, kapa 10	PolarFire Evaluation Kit (MPF300-EVAL-KIT)	Libero SoC, ModelSim, FlashPro Express

3. Lintho tse hlokahalang

Pele o qala demo, etsa bonnete ba hore:

• Khoasolla sebopeho sa demo files ho tsoa sehokelong se fanoeng: Khoasolla Sehokelo
• Kenya Libero SoC ho PC e amohelang ho tsoa sehokelong sa ho kenya se fanoeng.
• Netefatsa hore u na le mefuta ea morao-rao ea li-driver tsa ModelSim, Synplify Pro, le FTDI tse kenyellelitsoeng ka har'a sephutheloana sa ho kenya Libero SoC.

4. Moqapi oa Demo

Setšoantšo sa block block sa boemo bo holimo sa moralo oa TVS se kenyelletsa liteishene tsohle tse 'ne tse lumelletsoeng tsa TVS ho lekola mocheso oa lefu le vol.tage rails. The Fabric logic e nka lihlahisoa tsa liteishene tsa TVS ebe e li romella ho UART IF ka CoreUART IP.

LBH

• P: Morero oa karolo ea TVS ho PolarFire FPGA ke ofe?
  • A: Karolo ea TVS e tlaleha mocheso oa lefu le voltage ea lisebelisoa tsa lisebelisoa ka mokhoa oa dijithale ho lesela la FPGA.
• P: TVS e sebelisa likanale tse kae?
  • A: TVS e kenngoa ts'ebetsong ho sebelisoa 4-channel ADC.

Selelekela

Sesebelisoa se seng le se seng sa PolarFire se na le Temperature le Voltage Sensor (TVS). TVS e tlaleha mocheso oa shoa le voltage ea lisebelisoa tsa lisebelisoa ka mokhoa oa dijithale ho lesela la FPGA.

TVS e kengoa ts'ebetsong ho sebelisoa 4-channel ADC, 'me leseli la mocha le fanoa ka tsela e latelang:

• Channel 0—1V voltage phepelo
• Channel 1—1.8V voltage phepelo
• Channel 2—2.5V voltage phepelo
• Channel 3-Die mocheso

TVS e hlahisa boleng ba khouto ea 16-bit e emelang voltage kapa mocheso le nomoro ea mocha e tsamaellanang le eona. Mocheso le voltagtlhahisoleseding e fetoleloa ho mocheso o tloaelehileng le voltage litekanyetso. Bakeng sa tlhaiso-leseling e batsi, bona PolarFire FPGA le PolarFire SoC FPGA

PolarFire FPGA Mocheso le Moqtage Sensor

Demo ena e totobatsa tšobotsi ea TVS ea PolarFire e sebelisa sesebelisoa se thehiloeng ho UART (GUI). Moralo oa demo o tsoela pele ho pompa data ho tloha liteisheneng tsa TVS ho ea ho UART, e bonts'itsoeng ho GUI. Moralo ona oa demo o boetse o bonts'a mokhoa oa ho etsisa tšobotsi ea TVS ea sesebelisoa sa PolarFire.

Moralo oa demo o ka hlophisoa ho sebelisoa e 'ngoe ea likhetho tse latelang:

• Ho sebelisa mosebetsi file: Ho hlophisa sesebelisoa ho sebelisa mosebetsi file e fanoeng mmoho le moralo files, sheba 4. Sehlomathiso
• Ho hlophisa sesebelisoa u sebelisa FlashPro Express.
• Ho sebelisa Libero SoC: Ho hlophisa sesebelisoa ho sebelisa Libero SoC, bona 2. Libero Design Flow. Sebelisa khetho ena ha moralo oa demo o fetotsoe.

Litlhoko tsa Moralo

Tafole e latelang e thathamisitse litlhoko tsa hardware le software bakeng sa moralo ona oa demo.

Lethathamo la 1-1. Litlhoko tsa Moqapi Tataiso ea Mosebelisi ea Tšireletso.

Bohlokoa: Libero SmartDesign le linepe tsa tlhophiso tse bontšitsoeng tokomaneng ena ke tsa papiso feela. Bula moralo oa Libero ho bona lintlafatso tsa morao-rao

Lintho tse hlokahalang

Pele o qala:

Bakeng sa moralo oa demo files sehokelo sa download:

www.microchip.com/en-us/application-notes/AN4682

Khoasolla le ho kenya Libero SoC (joalo ka ha ho bonts'itsoe ho websebaka sa moralo ona) ho PC e amohelang ho tloha sebakeng se latelang: Sehokelo sa ho kenya Libero SoC Liphetolelo tsa morao-rao tsa bakhanni ba ModelSim, Synplify Pro, le FTDI li kenyellelitsoe ka har'a sephutheloana sa ho kenya Libero SoC.

Moqapi oa Demo

Setšoantšo se latelang se bontša setšoantšo sa block block sa boemo bo holimo sa moralo oa TVS. Likanale tse 'ne tsa TVS li nolofalitsoe moralong oa ho lekola mocheso oa lefu le voltage rails. The Fabric logic e hapa lihlahisoa tsa liteishene tsa TVS ebe e li romella ho UART IF ka CoreUART IP.

GUI e amohela litekanyetso tsa TVS ka mocha 'me e khetha ho li bontša joalokaha ho hlalositsoe:

Die Mocheso
Boleng ba tlhahiso ea kanale ea mocheso ea 16-bit bo emetsoe ho Kelvin 'me bo ka khethoa joalo ka ha ho thathamisitsoe lethathamong le latelang. Bakeng sa mohlalaample, boleng ba tlhahiso ea mocha oa mocheso oa 0x133B bo bolela 307.56 Kelvin.

Lethathamo la 1-2. Thempereichara Boleng ba Channel Decoding

Moqtage

Lintlha tse teng ho VALUE le liphetho tsa CHANNEL li sebetsa feela ha tlhahiso ea VALID e tiisitsoe. Ha kanale e koetsoe ka ho hlakisa hore mocha o tsamaisanang o lumelle ho kenya, data ea kanale e teng ho liphetho ha e sebetse le haeba tlhahiso ea VALID e tiisitsoe. MolumotagBoleng ba tlhahiso ea mocha oa 16-bit bo emeloa ka millivolts (mV) 'me bo ka khethoa joalo ka ha ho thathamisitsoe tafoleng e latelang. Bakeng sa mohlalaample, voltagboleng ba tlhahiso ea mocha oa 0x385E bo bolela 1803.75 mV.

Phethahatso ea Moqapi

Palo e latelang e bonts'a ts'ebetsong ea moralo oa software ea Libero SoC ea moralo oa demo oa TVS.

Moralo oa boemo bo holimo o kenyelletsa likarolo tse latelang:

• TVS_IP_0 Macro
• Kore_UART_0
• TVS_to_UART_0 mohopolo
• clock_gen_0
• INIT_MONITOR_0 le PF_RESET_0

TVS_IP_0 Macro

Setšoantšo se latelang se bontša configurator ea TVS interface.

GUI e bonts'a mocheso oa mocheso ka likhato tsa Celsius ka ho fetola litekanyetso tsa Kelvin. Boleng ba Celsius = Kelvin boleng - 273.15

TVS_to_UART_0

The TVS to UART logic e hapa Mocheso le Moqtage boleng ho tsoa ho TVS macro mme e romella data ho Core_UART_0.

clock_gen_0

CCC e hlophiselitsoe ho hlahisa oache ea 100 MHz.

Ketsiso Phallo

Moetso oa ketsiso oa TVS o nchafatsa liphetho tse kholo tsa TVS ho ipapisitsoe le litaelo tsa ho bala tse fanoeng ho .mem file kapa .txt file. The file Lebitso le tlameha ho fetisetsoa mofuteng oa ketsiso hore liphetho tsa TVS li fetohe. Paramethara e sebelisitsoeng ho boloka .mem file lebitso le bitsoa “TVS_MEMFILE”. Kenya taelo e latelang ea vsim ho fetisa file lebitso

The .mem file e na le nako ea papiso e lateloang ke boleng ba dijithale (16-bit) ea likanale tse 'ne tsa ADC ka nako eo. Ho hlokahala boleng bakeng sa kanale leha e sa sebelisoe. Theko e ka ba 0. Papiso e qala ka lihlahisoa tsohle tsa kanane e le 0. Paterone e ka phetoa makhetlo a 'maloa ho .mem file ho bonahatsa boleng ba 'maloa ba liphetho tsa kanale. Litaba tsa mem file e lekanyelitsoe ho mela e 256.

Ho Etsisa Moralo

Morero oa Libero o kenyelletsa benche ea liteko ho etsisa block TVS. Testbench e nka litekanyetso tsohle tse 'nè tsa TVS ho sebelisa CoreUART IP. Litekanyetso tsa digital bakeng sa likanale tse 'nè li fetisoa ka .mem file.

Ketsiso Settings

Etsa mehato e latelang ho fetisa .mem file bakeng sa papiso:

1. Bula litlhophiso tsa projeke ea Libero SoC (Projeke> Litlhophiso tsa Morero).
2. Khetha litaelo tsa Vsim tlas'a likhetho tsa Simulation. Kena

-gTVS_MEMFILE=“tvs_values.mem” lebaleng la Dikgetho tsa Tlatsetso ebe o tobetsa Boloka. A sample tvs_values.mem file e fanoe ka har'a foldara ea papiso. The .mem file e tlameha ho ba teng ka har'a foldara ea papali ea morero oa Libero. The tvs_values.mem file e hapa tlhahiso ea dijithale ea 16-bit ea block ea TVS ka linako tse fapaneng.

Etsa mehato e latelang ho etsisa moralo:

1. Ho Thepa ea Phallo ea Moralo, tobetsa ka ho le letona Etsisa tlas'a Verify Pre-Synthesis Design ebe u khetha Open Interactively.

Setšoantšo sa 1-5. Phallo ea Moralo-Etsisa

Fesetere ea Wave e hlaha ha ketsiso e phethiloe, joalo ka ha ho bonts'itsoe setšoantšong se latelang. Kaha likanale tse 'nè li nolofalitsoe, potoloho ea TVS e hlahisa boleng ba likanale tse' nè ka nako e fanoeng ka nako ea tlhahiso ea VALUE hammoho le nomoro ea mocha ka tlhahiso ea CHANNEL. Lintlha tse teng mabapi le VALUE le liphetho tsa CHANNEL li sebetsa feela ha tlhahiso ea VALID e tiisitsoe. Ela hloko tse latelang ho tsoa ho liphetho tsa papiso:

• Ka mor'a hore mocha o khone ho fetola, TVS block e nka 390 microseconds ho qeta phetoho.
• Seteishene se seng le se seng se na le tieho ea phetoho ea li-microseconds tse 410.
• Sekhahla sa phetoho se lekana le li-microseconds tsa 1920, tse lekanang le sekhahla sa phetoho se behiloeng ho configurator ea TVS.
• TVS block e hlahisa litekanyetso tse hlahisoang ho latela litekanyetso tse fanoeng ho tvs_values.mem file.

Setšoantšo se latelang se bontša UI ea fensetere ea ModelSim Pro ME Wave.

Koala ModelSim Pro ME le morero oa Libero.

Libero Design Phallo

Khaolo ena e hlalosa phallo ea moralo oa Libero oa moralo oa demo. Phallo ea moralo oa Libero e kenyelletsa mehato e latelang:

• Kopanya
• Sebaka le tsela
• Netefatsa Nako
• Hlahisa Bitstream
• Etsa ketso ea LENANEO

Setšoantšo se latelang se bontša likhetho tsena ho "Design Flow" tab

Kopanya

Etsa mehato e latelang ho kopanya moralo

1. Ho tsoa fensetereng ea Moralo oa Phallo, tobetsa habeli Synthesize. Letšoao le letala la tick le hlaha ha motsoako o atlehile, joalo ka ha ho bonts'itsoe ho Setšoantšo sa 2-1.
2. Tobetsa ka ho le letona Synthesize ebe u khetha View Tlaleha ho view tlaleho ea motsoako le log files ho tab ya Litlaleho.

Sebaka le Tsela

1. Ho tsoa fensetereng ea Design Flow, tobetsa habeli Sebaka le Tsela.
   Letšoao le letala la tick le hlaha ha sebaka le tsela li atlehile, joalo ka ha ho bonts'itsoe ho Setšoantšo sa 2-1.
2. Tobetsa ka ho le letona Sebaka le Tsela ebe u khetha View Tlaleha ho view sebaka le tlaleho ea tsela le log files ho tab ya Litlaleho.

Netefatsa Nako

Ho netefatsa nako, etsa mehato e latelang:

1. Ho tsoa fensetereng ea Moralo oa Phallo, tobetsa habeli Netefatsa Nako. Ha moralo o atleha ho fihlela litlhoko tsa nako, ho hlaha letšoao le letala letshwao, joalo ka ha ho bonts'itsoe ho Setšoantšo sa 2-1.
2. Tobetsa ka ho le letona Netefatsa Nako ebe u khetha View Tlaleha ho view netefatso tlaleho ea nako le log files ho tab ya Litlaleho.

Hlahisa FPGA Array Data

Ho hlahisa data ea FPGA, tobetsa habeli Hlahisa FPGA Array Data ho tsoa fensetereng ea Design Flow. Letšoao la lets'oao le letala le bonts'oa kamora tlhahiso e atlehileng ea data ea sehlopha sa FPGA, joalo ka ha ho bonts'itsoe ho Setšoantšo sa 2-1.

Hlahisa Bitstream

Etsa mehato e latelang ho hlahisa bitstream:

1. Tobetsa habeli Hlahisa Bitstream ho tsoa tabeng ea Phallo ea Moralo.
   Ha bitstream e hlahisoa ka katleho, ho hlaha letšoao le letala la tick, joalokaha ho bontšoa ho Figure 2-1.
2. Tobetsa ka ho le letona Hlahisa Bitstream ebe u khetha View Tlaleha ho view letlapa le tsamaellanang file tabeng ea Litlaleho.

Etsa ketso ea LENANEO

Kamora ho hlahisa bitstream, sesebelisoa sa PolarFire se tlameha ho hlophisoa. Etsa mehato e latelang ho hlophisa sesebelisoa sa PolarFire:

1. Netefatsa hore Litlhophiso tse latelang tsa Jumper li behiloe botong.

• Hokela thapo ea phepelo ea matla ho sehokelo sa J9 botong.
• Hokela thapo ea USB ho tloha ho Host PC ho ea ho J5 (FTDI port) botong.
• Matlafatsa boto ka ho sebelisa switjha ea li-slide ea SW3.
• Tobetsa habeli Run PROGRAM Action ho tsoa ho Libero> Design Flow tab.
• Letšoao le letala la tick le hlaha ha sesebelisoa se hlophisoa ka katleho, joalo ka ha ho bonts'itsoe ho Setšoantšo sa 2-1.

Ho tsamaisa Demo

Khaolo ena e hlalosa ho kenya le ho sebelisa Graphic User Interface (GUI) ho tsamaisa pontšo ea TVS. Sesebelisoa sa demo sa PolarFire TVS ke GUI e bonolo e sebetsang ho PC e amohelang ho buisana le PolarFire Device.

Etsa mehato e latelang ho kenya GUI:

1. Ntša litaba tsa mpf_an4682_v2022p1_eval_df.rar file. Ho tsoa ho foldareng ea mpf_an4682_v2022p1_eval_df\GUI\TVS_Monitor_GUI_Installer, tobetsa habeli setup.exe file.
2. Latela litaelo tse hlahang wizate ea ho instola. Kamora ho kenya ka katleho, TVS_Monitor_GUI e hlaha ho Start menu ea komporo ea PC e amohelang.

Etsa mehato e latelang ho tsamaisa demo ea TVS:

1. Ho tsoa ho Start menu, tobetsa TVS_Monitor_GUI ho qala sesebelisoa. Netefatsa hore boto e hokahane mme ho khethiloe Folder ea Log e nepahetseng.
2. Tobetsa Connect. Khokahanong e atlehileng, GUI e bonts'a mocheso le voltage litekanyetso. The Log file e entsoe ka nako ea stamp ho file lebitso sebakeng sa Log Folder. Ka kamehla, Log Folder e supa ho 'SupportFiles' bukeng ea ho kenya. Basebedisi ba ka fetola sebaka sa Log Folder pele ba hokela boto. Bohlokoa: Netefatsa hore Log Folder ha se sebaka se thibetsoeng ke sistimi. Tabeng ena, mosebelisi o tlameha ho qala GUI ka litokelo tsa admin (tobetsa ka ho le letona ebe o tsamaisa joalo ka admin).
3. Upper Limit, Lower Limit, le phapang e fokolang ea ho rema lifate bakeng sa mocha ka mong li ka hlophisoa ho setup.ini file. Litefiso tsa kanale li kentsoe lethathamong file haeba phapang e feta boleng bo boletsweng ba 'min var' ho setup.ini file. Setšoantšo se latelang se bontša mocheso o tloaelehileng le voltage litekanyetso tsa mocha 0 (1.05 V). Morero o lumellana le litekanyetso tsa Channel 0. Ka mokhoa o ts'oanang, khetha litsela tse ling le view boleng le merero ea bona e tsamaellanang.

Bohlokoa: GUI e ntlafatsa boleng ba kanale ea TVS ka tieho e kentsoeng karolong ea Delay (ms).

Sehlomathiso sa 1: Ho hlophisa sesebelisoa ka FlashPro Express

Khaolo ena e hlalosa mokhoa oa ho hlophisa sesebelisoa sa PolarFire ka lenaneo la .job file sebelisa FlashPro Express. The .mosebetsi file e fumaneha ka moralo o latelang files sebaka sa foldara: mpf_an4682_v2022p1_eval_df\Programming_Job

Etsa mehato e latelang ho hlophisa sesebelisoa:

1. Netefatsa hore litlhophiso tsa jumper botong li tšoana le tse thathamisitsoeng ho Lethathamo la 2-1. Bohlokoa: Sesebelisoa sa phepelo ea motlakase se tlameha ho tima ha ho etsoa likhokahano tsa jumper.
2. Hokela thapo ea phepelo ea matla ho sehokelo sa J9 botong.
3. Hokela thapo ya USB ho tswa ho Host PC ho ya J5 (FTDI port) botong.
4. Matlafatsa boto ka ho sebelisa switjha ea li-slide ea SW3.
5. Ho PC e amohelang, qala software ea FlashPro Express.
6. Tobetsa e Ncha kapa khetha Morero o Mocha oa Mosebetsi ho FlashPro Express Job ho tsoa lenaneng la Morero ho theha projeke e ncha, joalo ka ha ho bonts'itsoe lipalong tse latelang.
7. Kenya tse latelang ho Morero o Mocha oa Mosebetsi ho tsoa lebokoseng la puisano la FlashPro Express Job:
   • Mosebetsi oa mananeo file: Tobetsa Browse, tsamaea ho ea sebakeng seo .job file e fumaneha, ebe u khetha file. Sebaka sa kamehla ke: \mpf_an4682_v2022p1_eval_df\Programming_Job.
   • Sebaka sa morero oa mosebetsi oa FlashPro Express: Tobetsa Batla 'me u tsamaee ho ea sebakeng seo u batlang ho boloka morero ho sona.
8. Tobetsa OK. Lenaneo le hlokahalang file e khethiloe ebile e loketse ho hlophisoa sesebelisoa.
9. Fesetere ea FlashPro Express e hlaha joalo ka ha ho bonts'itsoe setšoantšong se latelang. Etsa bonnete ba hore nomoro ea moqapi e hlaha tšimong ea Programmer. Haeba ho se joalo, hlahloba likhokahano tsa boto ebe u tobetsa Refresh/Rescan Programmers.
10. Tobetsa RUN ho hlophisa sesebelisoa. Ha sesebelisoa se hlophisoa ka katleho, boemo ba RUN PASSED bo bontšoa, joalokaha ho bontšitsoe setšoantšong se latelang. Sheba 3. Ho tsamaisa Demo ho tsamaisa demo ea TVS.
11. Koala FlashPro Express kapa ho "Project tab", tobetsa Tsoa ho "Project tab".

Sehlomathiso sa 2: Ho tsamaisa Lengolo la TCL

Lingoliloeng tsa TCL li fanoe ka moralo files tlasa foldara ea TCL_Scripts. Haeba ho hlokahala, phallo ea moralo e ka hlahisoa hape ho tloha ho Design Implementation ho ea mosebetsing file moloko.

Etsa mehato e latelang ho tsamaisa TCL:

1. Qala software ea Libero
2. Kgetha Morero > Phetha Sengoloa….
3. Tobetsa Batla ebe u khetha script.tcl bukeng e jarollotsoeng ea TCL_Scripts.
4. Tobetsa Matha.

Kamora ts'ebetso e atlehileng ea sengoloa sa TCL, projeke ea Libero e thehiloe ka har'a bukana ea TCL_Scripts. Ho fumana lintlha tse ling mabapi le lingoliloeng tsa TCL, sheba ho mpf_an4682_v2022p1_eval_df/TCL_Scripts/readme.txt. Sheba ho Tcl Commands Reference Guide bakeng sa lintlha tse ling mabapi le litaelo tsa TCL. Ikopanye le Tšehetso ea Theknoloji bakeng sa lipotso tse kopaneng ha u sebelisa mongolo oa TCL.

Nalane ea Phetoho

Nalane ea ntlafatso e hlalosa liphetoho tse kentsoeng tšebetsong tokomaneng. Liphetoho li thathamisitsoe ka ntlafatso, ho qala ka khatiso ea morao-rao.

Tšehetso ea Microchip FPGA

Sehlopha sa lihlahisoa tsa Microchip FPGA se tšehetsa lihlahisoa tsa sona ka lits'ebeletso tse fapaneng tsa tšehetso, ho kenyeletsoa Ts'ebeletso ea Bareki, Setsi sa Ts'ehetso ea Tekheniki ea Bareki, a websebaka, le liofisi tsa thekiso lefatšeng ka bophara. Bareki ba khothaletsoa ho etela lisebelisoa tsa Marang-rang tsa Microchip pele ba ikopanya le tšehetso kaha ho ka etsahala hore ebe lipotso tsa bona li se li arajoa. Ikopanye le Setsi sa Tšehetso ea Setsebi ka ho website at www.microchip.com/support. Bolela nomoro ea Karolo ea Sesebelisoa sa FPGA, khetha mofuta o nepahetseng oa linyeoe, 'me u hlophise moralo files ha u ntse u theha nyeoe ea tšehetso ea tekheniki. Ikopanye le Tshebeletso ya Bareki bakeng sa tshehetso ya dihlahiswa tseo e seng tsa botekgeniki, jwalo ka ditheko tsa sehlahiswa, dintlafatso tsa sehlahiswa, tlhahisoleseding e ntjhafatsa, boemo ba odara, le tumello.

• Ho tsoa Amerika Leboea, letsetsa 800.262.1060
• Ho tsoa lefats'eng lohle, letsetsa 650.318.4460
• Fax, ho tsoa kae kapa kae lefatšeng, 650.318.8044
• Boitsebiso ba Microchip

Microchip Websebaka

Microchip e fana ka tšehetso ea inthaneteng ka rona website at www.microchip.com/. Sena websebaka se sebedisoang ho etsa files le tlhahisoleseding e fumaneha habonolo ho bareki. Tse ling tsa litaba tse fumanehang li kenyelletsa:

• Tšehetso ea Sehlahisoa - Lipampiri tsa data le errata, lintlha tsa kopo le sample mananeo, lisebelisoa tsa moralo, litataiso tsa basebelisi le litokomane tsa tšehetso ea hardware, lintlafatso tsa morao-rao tsa software le li-archived software
• Tšehetso e Akaretsang ea Tekheniki - Lipotso Tse Botsoang Khafetsa (FAQs), likopo tsa tšehetso ea tekheniki, lihlopha tsa lipuisano tsa inthaneteng, lethathamo la litho tsa lenaneo la balekane ba Microchip
• Khoebo ea Microchip - Mokhethoa oa lihlahisoa le litataiso tsa ho odara, likhatiso tsa morao-rao tsa khatiso tsa Microchip, lethathamo la li-seminar le liketsahalo, lethathamo la liofisi tsa thekiso ea Microchip, barekisi le baemeli ba feme Product Change Notification Service Tšebeletso ea tsebiso ea phetoho ea sehlahisoa ea Microchip e thusa ho boloka bareki ba ntse ba le teng ka lihlahisoa tsa Microchip. Ba ngolisitseng ba tla fumana tsebiso ea lengolo-tsoibila neng kapa neng ha ho na le liphetoho, lintlafatso, lintlafatso kapa liphoso tse amanang le sehlahisoa se itseng sa lelapa kapa sesebelisoa sa ntlafatso sa thahasello.

Ho ngodisa, eya ho www.microchip.com/pcn mme o latele ditaelo tsa ngodiso.

Tšehetso ea Bareki

Basebelisi ba lihlahisoa tsa Microchip ba ka fumana thuso ka likanale tse 'maloa:

• Morekisi kapa Moemedi
• Ofisi ea Thekiso ea Lehae
• Embedded Solutions Engineer (ESE)
• Tšehetso ea tekheniki

Bareki ba lokela ho ikopanya le mofani oa bona oa thepa, moemeli kapa ESE bakeng sa tšehetso. Liofisi tsa thekiso ea lehae le tsona li teng ho thusa bareki. Lethathamo la liofisi tsa thekiso le libaka li kenyelelitsoe tokomaneng ena. Tšehetso ea tekheniki e fumaneha ka ho websebaka ho: www.microchip.com/support

Karolo ea Tšireletso ea Khoutu ea Lisebelisoa tsa Microchip

Ela hloko lintlha tse latelang tsa ts'ireletso ea khoutu lihlahisoa tsa Microchip

• Lihlahisoa tsa Microchip li kopana le litlhaloso tse fumanehang ho Microchip Data Sheet ea bona.
• Microchip e lumela hore lihlahisoa tsa eona li sireletsehile ha li sebelisoa ka mokhoa o reriloeng, ka har'a litlhaloso tsa ts'ebetso, le tlas'a maemo a tloaelehileng.
• E boloka boleng ba Microchip mme ka mabifi e sireletsa litokelo tsa eona tsa thepa ea mahlale. Boiteko ba ho tlola likarolo tsa ts'ireletso ea khoutu ea sehlahisoa sa Microchip bo thibetsoe ka thata 'me bo ka tlola Molao oa Copyright oa Millennium oa Digital.
• Ha ho Microchip kapa moetsi ofe kapa ofe oa semiconductor ea ka netefatsang ts'ireletso ea khoutu ea eona. Tšireletso ea khoutu ha e bolele hore re tiisa hore sehlahisoa "se ke ke sa robeha". Tšireletso ea khoutu e lula e fetoha. Microchip e ikemiselitse ho tsoela pele ho ntlafatsa likarolo tsa ts'ireletso ea khoutu ea lihlahisoa tsa rona.

Tsebiso ea Molao

Khatiso ena le lintlha tse mona li ka sebelisoa feela le lihlahisoa tsa Microchip, ho kenyeletsoa ho rala, ho leka, le ho kopanya lihlahisoa tsa Microchip le kopo ea hau. Tšebeliso ea tlhahisoleseling ena ka tsela efe kapa efe e tlola melaoana ena. Lintlha mabapi le lits'ebetso tsa sesebelisoa li fanoe molemong oa hau feela 'me li ka nkeloa sebaka ke liapdeite. Ke boikarabello ba hau ho netefatsa hore kopo ea hau e kopana le litlhaloso tsa hau. Ikopanye le ofisi ea thekiso ea Microchip ea lehae bakeng sa tšehetso e eketsehileng kapa, fumana tšehetso e eketsehileng ho

www.microchip.com/en-us/support/design-help/client-support-services. TSEBISO ENA E FUMANA KE MICROCHIP "JOALOKAHA E LE". MICROCHIP HA E SEBELE KAPA LITIISETSO TSA MOFUTA OFE kapa O fe Ebang E BONAHALA KAPA E BONAHALA, E NGOLOA KAPA MOLOMO, KA MOLAO KAPA JOANG, E Amanang le TSEBISO E KENYELETSOE EMPA E SA FUMANA HO TLHOKOMELISO EFE KAPA EFE, LE TLHOKOMELISO EA TLHOKOMELO R MORERO, KAPA TIISETSO E Amanang le MAEMO, BOLEMO, KAPA KETSAHALO EA EONA. HA HO LE TSATSAHALO, MICROCHIP E TLA BA MOTHO OA MOLATO BAKENG SA LITABA LIFE, TSE KHETHEHILENG, TSA KOTSI, TSATSAHALO, KAPA TAHLEHELO E LATELANG, TŠENYEHO, LITŠEnyehelo, KAPA LITJEHO TSA MOFUTA OFE O TLANG LE LITSEBISO KAPA TŠEBELETSO EA LONA, LE HO KA ETSAHALA KETSAHALO E ETSANG. TSE KA E KA ETSAHANG KAPA MESEKO E BONAHALA. HO FIHLELA KA HO FETISISA HO DUMELLA KE MOLAO, BOIKARABELO KAOFELA BA MICROCHIP HO LIKELETSO KAOFELA KA TSELA EFE KAPA E MABAPI LE TSEBISO KAPA TŠEBELETSO EA YONA E KE KE E FEELA BOLIMO OA LITEFO, HA E LE TSE LE FELA, TSEO U LI LEFILENG KA THOTLHALA BAKENG SA MICROCHIP. Tšebeliso ea lisebelisoa tsa Microchip ts'ehetso ea bophelo le/kapa lits'ebetso tsa ts'ireletso e kotsing ea moreki, 'me moreki o lumela ho sireletsa, ho qosa le ho boloka Microchip e se nang kotsi ho tsoa lits'enyehelo tsohle, likopo, lisutu, kapa litšenyehelo tse bakoang ke ts'ebeliso e joalo. Ha ho lilaesense tse fetisoang, ka mokhoa o hlakileng kapa ka tsela e 'ngoe, tlasa litokelo life kapa life tsa thepa ea mahlale a Microchip ntle le ha ho boletsoe ka tsela e ngoe.

Matšoao a khoebo

Lebitso la Microchip le logo, logo ea Microchip, Adaptec, AVR, logo ea AVR, AVR Freaks, BesTime, BitCloud, CryptoMemory, CryptoRF, dsPIC, flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck, LinkMD, maXStylus MediaLB, megaAVR, Microsemi, Microsemi logo, MOST, MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo, PolarFire, Prochip Designer, QTouch, SAM-BA, SenGenuity, SpyNIC, SST, SST Logo, SuperFlash, Symmetri , SyncServer, Tachyon, TimeSource, tinyAVR, UNI/O, Vectron, le XMEGA ke matšoao a ngolisitsoeng a khoebo a Microchip Technology Incorporated USA le linaheng tse ling. AgileSwitch, APT, ClockWorks, The Embedded Control Solutions Company, EtherSynch, Flashtec, Hyper Speed ​​Control, HyperLight Load, Libero, motorBench, mTouch, Powermite 3, Precision Edge, ProASIC, ProASIC Plus, logo ea ProASIC Plus, Quiet- Wire, SmartFusion, SyncWorld, Temux, TimeCesium, TimeHub, TimePictra, TimeProvider, TrueTime, le ZL ke matshwao a kgwebo a ngodisitsweng a Microchip Technology Incorporated in the USA Adjacent Key Suppression, AKS, Analog-for-the-Digital Age, Any Capacitor, AnyIn, AnyOut, Augmented Switching. , BlueSky, BodyCom, Clockstudio, CodeGuard, CryptoAuthentication, CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPICDEM.net, Dynamic Average Matching, DAM, ECAN, Espresso T1S, EtherGREEN, GridTime, IdealCirnet, serialBridgeit In-Programme, IdealCircuridgeit In-Serial, serialBridgeit In-Series IntelliMOS Paralleling, IntelliMOS, Inter-Chip Connectivity, JitterBlocker, Knob-on-Display, KoD, maxCrypto, maxView, memBrain, Mindi, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PowerSmart, PureSilicon, QMatrix, REAL ICE, RTAX , RTG4, SAMAN4682 ICE, Serial Quad I/O, simpleMAP, SimpliPHY, SmartBuffer, SmartHLS, SMART-IS, storClad, SQI, SuperSwitcher,
SuperSwitcher II, Switchtec, SynchroPHY, Kakaretso ea Mamello, Nako e Tšeptjoang, TSHARC, USBCheck, VariSense, VectorBlox, VeriPHY, ViewSpan, WiperLock, XpressConnect, le ZENA ke matshwao a kgwebo a Microchip Technology Incorporated USA le dinaheng tse ding. SQTP ke letshwao la tshebeletso la Microchip Technology Incorporated in USA The Adaptec logo, Frequency on Demand, Silicon Storage Technology, le Symmcom ke matshwao a kgwebo a ngodisitsweng a Microchip Technology Inc. dinaheng tse ding. GestIC ke letshwao la kgwebo le ngodisitsweng la Microchip Technology Germany II GmbH & Co. KG, e leng lekala la Microchip Technology Inc., dinaheng tse ding. Matshwao a mang kaofela a boletsoeng mona ke thepa ea lik'hamphani tse fapaneng. © 2022, Microchip Technology Incorporated le lithuso tsa eona. Litokelo tsohle li sirelelitsoe. ISBN: 978-1-6683-0685-7 Sistimi ea Tsamaiso ea Boleng Bakeng sa tlhaiso-leseling mabapi le Sistimi ea Tsamaiso ea Boleng ea Microchip, ka kopo etela www.microchip.com/quality

Lithekiso le Tšebeletso ea Lefatše Lohle

AMERIKA ASIA/PACIFIC ASIA/PACIFIC EUROPE

• Ofisi ea Khoebo
• 2355 West Chandler Blvd.
• Chandler, AZ 85224-6199
• Mohala: 480-792-7200
• Fax: 480-792-7277
• Tšehetso ea tekheniki:
• www.microchip.com/support
• Web Aterese:
• www.microchip.com
• Atlanta
• Duluth, GA
• Mohala: 678-957-9614
• Fax: 678-957-1455
• Austin, TX
• Mohala: 512-257-3370
• Boston
• Westborough, MA
• Mohala: 774-760-0087
• Fax: 774-760-0088
• Chicago
• Itasca, IL
• Mohala: 630-285-0071
• Fax: 630-285-0075
• Dallas
• Addison, TX
• Mohala: 972-818-7423
• Fax: 972-818-2924
• Detroit
• Novi, MI
• Mohala: 248-848-4000
• Houston, TX
• Mohala: 281-894-5983
• Indianapolis
• Noblesville, IN
• Mohala: 317-773-8323
• Fax: 317-773-5453
• Mohala: 317-536-2380
• Los Angeles
• Mission Viejo, CA
• Mohala: 949-462-9523
• Fax: 949-462-9608
• Mohala: 951-273-7800
• Raleigh, NC
• Mohala: 919-844-7510
• New York, NY
• Mohala: 631-435-6000
• San Jose, CA
• Mohala: 408-735-9110
• Mohala: 408-436-4270
• Canada - Toronto
• Mohala: 905-695-1980
• Fax: 905-695-2078
• Australia - Sydney
• Mohala: 61-2-9868-6733
• China - Beijing
• Mohala: 86-10-8569-7000
• China - Chengdu
• Mohala: 86-28-8665-5511
• China - Chongqing
• Mohala: 86-23-8980-9588
• China - Dongguan
• Mohala: 86-769-8702-9880
• China - Guangzhou
• Mohala: 86-20-8755-8029
• China - Hangzhou
• Mohala: 86-571-8792-8115
• China - Hong Kong SAR
• Mohala: 852-2943-5100
• China - Nanjing
• Mohala: 86-25-8473-2460
• China - Qingdao
• Mohala: 86-532-8502-7355
• China - Shanghai
• Mohala: 86-21-3326-8000
• China - Shenyang
• Mohala: 86-24-2334-2829
• China - Shenzhen
• Mohala: 86-755-8864-2200
• China - Suzhou
• Mohala: 86-186-6233-1526
• China - Wuhan
• Mohala: 86-27-5980-5300
• China - Xian
• Mohala: 86-29-8833-7252
• China - Xiamen
• Mohala: 86-592-2388138
• China - Zhuhai
• Mohala: 86-756-3210040
• India - Bangalore
• Mohala: 91-80-3090-4444
• India - New Delhi
• Mohala: 91-11-4160-8631
• India - Pune
• Mohala: 91-20-4121-0141
• Japane - Osaka
• Mohala: 81-6-6152-7160
• Japane - Tokyo
• Mohala: 81-3-6880-3770
• Korea - Daegu
• Mohala: 82-53-744-4301
• Korea - Seoul
• Mohala: 82-2-554-7200
• Malaysia - Kuala Lumpur
• Mohala: 60-3-7651-7906
• Malaysia - Penang
• Mohala: 60-4-227-8870
• Philippines - Manila
• Mohala: 63-2-634-9065
• Singapore
• Mohala: 65-6334-8870
• Taiwan - Hsin Chu
• Mohala: 886-3-577-8366
• Taiwan - Kaohsiung
• Mohala: 886-7-213-7830
• Taiwan - Taipei
• Mohala: 886-2-2508-8600
• Thailand - Bangkok
• Mohala: 66-2-694-1351
• Vietnam - Ho Chi Minh
• Mohala: 84-28-5448-2100
• Austria - Wels
• Mohala: 43-7242-2244-39
• Fax: 43-7242-2244-393
• Denmark - Copenhagen
• Mohala: 45-4485-5910
• Fax: 45-4485-2829
• Finland - Espoo
• Mohala: 358-9-4520-820
• Fora - Paris
• Tel: 33-1-69-53-63-20
• Fax: 33-1-69-30-90-79
• Jeremane - Ho khabisa
• Mohala: 49-8931-9700
• Jeremane - Haan
• Mohala: 49-2129-3766400
• Jeremane - Heilbronn
• Mohala: 49-7131-72400
• Jeremane - Karlsruhe
• Mohala: 49-721-625370
• Jeremane - Munich
• Tel: 49-89-627-144-0
• Fax: 49-89-627-144-44
• Jeremane - Rosenheim
• Mohala: 49-8031-354-560
• Iseraele - Ra'anana
• Mohala: 972-9-744-7705
• Italy - Milan
• Mohala: 39-0331-742611
• Fax: 39-0331-466781
• Italy - Padova
• Mohala: 39-049-7625286
• Netherlands - Drunen
• Mohala: 31-416-690399
• Fax: 31-416-690340
• Norway - Trondheim
• Mohala: 47-72884388
• Poland - Warsaw
• Mohala: 48-22-3325737
• Romania - Bucharest
• Tel: 40-21-407-87-50
• Spain - Madrid
• Tel: 34-91-708-08-90
• Fax: 34-91-708-08-91
• Sweden - Gothenberg
• Tel: 46-31-704-60-40
• Sweden - Stockholm
• Mohala: 46-8-5090-4654
• UK - Wokingham
• Mohala: 44-118-921-5800
• Fax: 44-118-921-5820

Litokomane / Lisebelisoa

MICROCHIP AN4682 Polar Fire FPGA Mocheso le Moqtage Sensor [pdf] Buka ea Taelo AN4682 Polar Fire FPGA Mocheso le Moqtage Sensor, AN4682, Polar Fire FPGA Temperature le Moqtage Sensor, FPGA Mocheso le Moqtage Sensor, Mocheso le Moqtage Sensor, Moqtage Sensor

Litšupiso

• Bukana ea Mosebelisi