PWM-120 Series 120W Constant Voltage Output LED Driver

“

Litlhaloso

MOHLALA	DC VOLTAGE	RETŠELISITSOE NKHOANE	REKETSO MATLA	SEHLOOHO	LIEKETSENG DIMM	PWM MOEKETSI	KHOTHAMO
EA-120-PW	12V	10A	120W	48V 2.5A 120W	0 ~ 100%	1.47kHz (Sekheo/DA-Mofuta), 2.5kHz (DA2-Mofuta)	88.5%
EA-120-PW	24V	5A	120W				90%
EA-120-PW	36V	3.4A	122.4W				90%
EA-120-PW	48V

Litaelo tsa Tšebeliso ea Sehlahisoa

Ho kenya

1. Netefatsa hore matla a kentsweng a tsamaisana le mofuta o itseng wa
   100-240Vac.
2. Hokela mojaro oa LED ho li-terminals tsa tlhahiso ea
   mokhanni.
3. Kenya mokhanni ka mokhoa o sireletsehileng sebakeng se nang le moea o motle ho thibela
   ho chesa haholo.

Taolo ea ho Finyella

Boemo bo fokolang ba mokhanni bo tloha ho 0% ho isa ho 100%. Ho lokisa
ho khanya ha li-LED, sebelisa mokhoa o lumellanang oa ho laola ho fifala
sebakeng sena.

Tlhokomelo

Kamehla hlahloba mokhanni bakeng sa matšoao leha e le afe a ho senyeha kapa ho senyeha.
Hloekisa mokhanni ka bonolo ka lesela le omeletseng ha ho hlokahala.

Lipotso tse atisang ho botsoa (FAQ)

P: Ke eng tlhahiso ea voltage fapaneng bakeng sa PWM-120 letoto la LED
mokhanni?

A: The input voltage fapaneng ke 100-240Vac bakeng sa DA2-Type
bakhanni.

P: Na nka hokela meroalo e mengata ea LED ho PWM-120 e le 'ngoe
mokhanni?

A: Ho khothalletsoa ho bua ka palo e kholo ea li-PSU ho
sekhechana sa potoloho se ipapisitse le mohlala le mofuta oa sekhechana sa potoloho
sebedisoa.

"`

120W Constant Voltage PWM Output LED Driver

Letoto la PWM-120
Buka ea Mosebelisi

2

(bakeng sa DA2-Type feela)

AC Input: 100-240Vac (bakeng sa DA2-Type feela)

IP67

KE 15885

TUMELO SAMUELE

TUMELO SAMUELE

05

ntle le mofuta oa 12DA

File Lebitso: PWM-120-SPEC 2024-09-25

120W PWM Output LED Driver

Letoto la PWM-120

TS'ELISO

MOHLALA

EA-120-PW

EA-120-PW

EA-120-PW

EA-120-PW

DC VOLTAGE

12V

24V

36V

RETŠELISITSOE NKHOANE

10A

5A

3.4A

REKETSO MATLA

120W

120W

122.4W

SEHLOOHO

LIEKETSENG DIMM

0 ~ 100%

PWM FREQUENCY (Mofuta) 1.47kHz bakeng sa Blank/DA-Type, 2.5kHz bakeng sa DA2-Type

SETUP, TSOSA NAKO

Ela hloko.2 Hlokomela.9

500ms, 80ms/230VAC kapa 115VAC

NAKO EA HO PHETHA (Mofuta.) 16ms/230VAC kapa 115VAC

TLHOKOMELOTAGE RANGE Hlokomela. 3

90 ~ 305VAC 127 ~ 431VDC (Ka kopo, sheba karolo ea "STATIC CHARACTERISTIC")

TŠEBELETSO EA FREQUENCY 47 ~ 63Hz

SEBETSO SA MATLA (Typ.)

PF>0.97/115VAC, PF>0.96/230VAC, PF>0.93/277VAC @ full load (Ka kopo, sheba karolo ea “POWER FACTOR (PF) CHARACTERISTIC”)

48V 2.5A 120W

PHETHAHETSO EA HARMONIC

THD< 20%(@load60%/115VAC, 230VAC; @load75%/277VAC) (Ka kopo, sheba karolo ea "TOTAL HARMONIC DISTORTION")

KEKETSO

KATLEHO (Mofuta.)

88.5%

90%

90%

AC CURRENT (Mofuta.)

1.3A / 115VAC 0.65A / 230VAC 0.55A / 277VAC

INRUSH CURRENT (Mofuta) COLD QALA 60A(twidth=520s e lekantsoeng ho 50% Ipeak) ho 230VAC; Ho latela NEMA 410

90.5%

MAX. NO. ea li-PSU ho 16A CIRCUIT BREAKER

Li-unit tse 4 (sekhechana sa potoloho ea mofuta oa B) / likarolo tse 6 (sekheo sa potoloho sa mofuta oa C) ho 230VAC

LEAKAGE NKHOANE

<0.25mA / 277VAC

HA HO MORORO/STANDBY TIRISO EA MATLA

Ha ho tšebeliso ea matla ea mojaro <0.5w bakeng sa mofuta o se nang letho; tšebeliso ea matla e emeng <0.5W bakeng sa mofuta oa DA/DA2-mofuta

KHAHLISA

108 ~ 130% e lekantsoe matla a tlhahiso ea Hiccup mode, e hlaphoheloa ka bo eona kamora hore boemo ba phoso bo tlosoe

TS'IRELETSO MOKOANE
KHAHLISO SEFOLITAGE

12V/24V hiccup mode le 36V/48V shut down mode(ho kenyeletsoa mofuta oa DA/ntle le mofuta oa DA2) Hiccup mode, e hlaphoheloa ka bo eona ka mor'a hore boemo ba phoso bo tlosoe (feela bakeng sa mofuta oa DA2)

15 ~ 17V

28 ~ 34V

41 ~ 46V

54 ~ 60V

Koala o/p voltage, matlafatsa hape ho fola

HO EKETSEHILENG HO EKETSEHILENG Koala o/p voltage, matlafatsa hape ho fola

MOSEBETSI TEMPELA.

Tcase=-40 ~ +90 (Ka kopo, sheba karolo ea ” OUTPUT LOAD vs TEMPERATURE”)

MAX. TLHALOSO TEMPE.

Tcase=+90

TIKOLOHO SEBETSA MONYENYANE

20 ~ 95% RH e sa lumellaneng

POLOKO TEMP., MONATE -40 ~ +80, 10 ~ 95% RH

MOEKETSI. TIISETSO MOKHOA

±0.03%/ (0 ~ 45, ntle le 0 ~ 40 bakeng sa 12V)

TSIETSO

10 ~ 500Hz, 5G 12min./1cycle, nako ea 72min. e 'ngoe le e 'ngoe e bapile le lilepe tsa X, Y, Z

UL8750( mofuta oa "HL") (ntle le mofuta oa 12DA), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13,

TS'IRELETSO MAEMO

Hlokomela. 5

BS EN/EN62384 e ikemetseng, IP67,BIS IS 15885(Part2/Sec13)(bakeng sa 12,24 Blank le Mofuta oa DA2), EAC TP TC 004, GB19510.1,GB19510.14 e amohetsoe; Moqapi o bua ka BS EN/EN60335-1; Ho latela BS EN/EN61347-2-13

sehlomathiso J se loketse ho kenngwa ha tshohanyetso(EL)(AC Input: 100-240Vac)(bakeng sa DA2-Type feela)

DALI LITEKELO

IEC62386-101, 102, 207,251 bakeng sa DA/DA2-Mofuta feela, Mofuta oa sesebelisoa 6(DT6)

TŠIRELETSO LE HO HLOKAHALA MOLLOTAGEI/PO/P:3.75KVAC; I/P-DA:1.5KVAC; O/P-DA:1.5KVAC

EMC

IOLATION REISTANCE I/PO/P:100M Ohms / 500VDC / 25/ 70% RH

TLHOKOMELO BA BANG

TLHALOSO EA EMC.6 TŠIRELETSO EA EMC

Ho lumellana le BS EN/EN55015, BS EN/EN61000-3-2 Sehlopha sa C (@load60%) ; BS EN/EN61000-3-3,GB/T 17743, GB17625.1;EAC TP TC 020
Ho lumellana le BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, boemo ba indasteri e bobebe (surge immunity Line-Line 2KV), EAC TP TC 020

MTBF TŠEBELETSO

2243.7K lihora tsa mots. Telcordia SR-332 (Bellcore); 191*63*37.5mm (L*W*H)

228.7K lihora tsa mets. MIL-HDBK-217F (25)

PAKA

0.97Kg; 15pcs / 15.6Kg / 0.87CUFT

1. Litekanyetso tsohle HA li boleloe ka ho khetheha li lekantsoe ka 230VAC, e lekantsoe hona joale le 25 ea mocheso o potolohileng. 2. Ho ka 'na ha hlokahala hore ho fokotsoe tekanyo tlas'a phallo e tlaasetages. Ka kopo sheba likarolo tsa "STATIC CHARACTERISTIC" ho fumana lintlha. 3. Bolelele ba nako ea ho seta bo lekantsoe qalong e batang. Ho bulela/KOMELA mokhanni ho ka baka keketseho ea nako ea ho seta. 4. Mokhanni o nkoa e le karolo e tla sebetsoa hammoho le thepa ea ho qetela. Kaha ts'ebetso ea EMC e tla ameha
ka ho kenya ka ho feletseng, baetsi ba lisebelisoa tsa ho qetela ba tlameha ho boela ba tšoaneleha EMC Directive mabapi le ho kenya ka ho feletseng hape. (joalokaha e fumaneha ho https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 5. Letoto lena le kopana le tebello e tloaelehileng ea bophelo ea > lihora tse 50,000 tsa ts'ebetso ha Tcase, haholo-holo tc point (kapa TMP, ho ea ka DLC ), e ka ba 75 kapa ka tlase ho moo. 6. Ka kopo sheba setatemente sa tiisetso ho MEAN WELL's webSebaka sa marang-rang ho http://www.meanwell.com 7. Thempereichara ea tikoloho ea 3.5/1000m ka mefuta e se nang fan le ea 5/1000m e nang le mefuta ea fene bakeng sa bophahamo ba ho sebetsa ho feta 2000m(6500ft). 8. Bakeng sa tlhokomeliso efe kapa efe ea kopo le tlhokomeliso ea ts'ebetso ea ts'ebetso ea bopaki ba metsi ea IP, ka kopo sheba bukana ea rona ea mosebelisi pele u e sebelisa. https://www.meanwell.com/Upload/PDF/LED_EN.pdf 9. E ipapisitse le matla a IEC 62386-101/102 DALI mabapi le melaoana ea nako le tšitiso, nako e behiloeng e hloka ho lekoa ka molaoli oa DALI ea ka tšehetsang Matla a DALI mosebetsing, ho seng joalo nako ea ho seta e tla ba holimo ho metsotsoana e 0.5 bakeng sa mofuta oa DA.
Bakeng sa tlhaiso-leseling e batsi, ka kopo sheba ho https://www.meanwell.com/serviceDisclaimer.aspx
File Lebitso: PWM-120-SPEC 2024-09-25

120W PWM Output LED Driver
MOSEBETSI OA DIMMING

Letoto la PWM-120

AC/L(Sootho) AC/N(Putsoa)

PWM-120

Molao-motheo oa dimming bakeng sa tlhahiso ea setaele sa PWM Dimming e fihlelleha ka ho fetola potoloho ea mosebetsi oa tlhahiso ea hajoale.
Output DC jwale ON

Io=0A

TLOA TONA
T

DIM+(Purple)* DIM-(Pinki)** +V(Red)(Sootho bakeng sa mofuta wa DA) -V(Black)(Blue bakeng sa mofuta wa DA)
* DIM+ bakeng sa Blank-Type DA+ bakeng sa mofuta oa DA/DA2
* *DIM- bakeng sa Mofuta oa Blank DA- bakeng sa mofuta oa DA/DA2

TONANA

Potoloho ea mosebetsi(%) =

×100%

T

Sephetho sa PWM khafetsa : 1.47kHz bakeng sa Blank/DA-Type 2.5kHz bakeng sa DA2-Type

3 ho 1 ts'ebetso ea dimming (bakeng sa Mofuta o se nang letho)
Sebelisa o mong oa mekhoa e meraro lipakeng tsa DIM+ le DIM-: 0 ~ 10VDC, kapa 10V PWM lets'oao kapa khanyetso. Mohloli o fokolang oa hona joale o tsoang ho motlakase: 100A (mofuta.)

Ho sebelisa tlatsetso 0 ~ 10VDC

+V +

Lisebelisoa tsa LED

-V DIM+
DIM-

–
+ Moqtage
–

"U SE KE UA hokela "DIM- ho -V"

+ -

10%

0.15%

EA-0.6V 1V

Duty cycle of output current (%)

100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0%
0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage

Ho kenya lets'oao la tlatsetso la 10V PWM (maqhubu a maqhubu a 100Hz ~ 3KHz):

+V +

Lisebelisoa tsa LED

-V DIM+
DIM-

Letšoao la PWM la tlatsetso

"U SE KE UA hokela "DIM- ho -V"

+ -
10% 0.15%
6% 10%

Duty cycle of output current (%)

100% 90% 80% 70% 60% 50% 40% 30% 20% 10%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Potoloho ea mosebetsi oa kenyelletso ea 10V PWM ea ho fifala ha lets'oao

File Lebitso: PWM-120-SPEC 2024-09-25

120W PWM Output LED Driver

Letoto la PWM-120

Ho sebelisa li-additive resistance:

+V +

Lisebelisoa tsa LED

-V DIM+
DIM-

Keketso Resistance

"U SE KE UA hokela "DIM- ho -V"

+ -
10% 0.15%
6K/N 10K/N

Duty cycle of output current (%)

100% 90% 80% 70% 60% 50% 40% 30% 20% 10%

0% Khutšoane

10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N= bongata ba mokhanni bakeng sasynchronizeddimmingoperation)
Dimming input: Keketso ya ho hanyetsa

Tlhokomeliso : 1. Min. duty cycle of output current e ka ba 0.15%, mme dimming input e ka ba 6K kapa 0.6VDC, kapa 10V PWM sign with 6% duty cycle. 2. Mosebetsi oa potoloho ea tlhahiso ea hona joale e ka theohela ho 0% ha dimming input e ka tlase ho 6K kapa ka tlase ho 0.6VDC, kapa 10V PWM pontšo e nang le potoloho ea mosebetsi e ka tlaase ho 6%.

DALI Interface (lehlakore la mantlha; bakeng sa DA/DA2-Type) Kenya lets'oao la DALI lipakeng tsa DA+ le DA-. Protocol ea DALI e na le lihlopha tse 16 le liaterese tse 64. Mohato oa pele o tsitsitse ho 0.2% ea tlhahiso

File Lebitso: PWM-120-SPEC 2024-09-25

Moroalo (%)

120W PWM Output LED Driver
OUTPUT LOAD vs TEMPERATURE

Letoto la PWM-120

100
80 230VAC Kenyo feela
60 50 40
20

12V feela

-40 -25

0

15

30

40 45 50

60

AMBIENT TEMPERATURE,Ta ()

70 (HORIZONTAL)

Moroalo (%)

100
80 230VAC Kenyo feela
60
40
20

-40 -25 0

20

45

65

75

85

90 (HORIZONTAL)

Tcase ()

TŠOANELO STATIC

100 90 80 70 60 50 40
90 100 125 135 145 155 165 175 180 200 230 305
KEKETSO MOLAPOTAGE (V) 60Hz De-rating e ea hlokahala tlas'a phallo e tlaase ea voltage.

PUSELETSO EA TSOHLE EA HARMONIC (THD)

48V Model, Tcase ho 80

30%

25%

20%

277VAC

15%

230VAC

115VAC

10%

5%

0%

50%

60%

70%

80%

90%

100%

MOJALO

SEBELISA(%)

PF

MATLA (PF) TŠEBELETSO

Tcase ka 80

1 .0 0 0 .9 5 0 .9 0 0 .8 5 0 .8 0 0 .7 5 0 .7 0 0 .6 5 0 .6 0 0 .5 5 0 .5 0 0 .4 5 0 . 4 0 0 .3 5 0 .3 0
10%

20%

30%

40%

50%

60%

70%

80%

90% 100% (75W)

MOJALO

277V 230V 115V

KATLEHO vs MOJARO
Letoto la PWM-120 le na le ts'ebetso e phahameng ea ts'ebetso hoo ho ka fihleloang ho fihla ho 90.5% lits'ebetsong tsa masimong. Mohlala oa 48V, Tcase ho 80

92 91 90 89 88 87 86 85 84 83 82 81 80
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

277V 230V 115V

MOJALO

THD LOAD (%)

File Lebitso: PWM-120-SPEC 2024-09-25

120W PWM Output LED Driver

Letoto la PWM-120

BOPHELONG

BOPHELO NAKO(Kh)

120

100

80

60

40

20

0

20

30

40

50

60

70

80

90

Tcase()

File Lebitso: PWM-120-SPEC 2024-09-25

120W PWM Output LED Driver

Letoto la PWM-120

Setšoantšo se Thibeloang

SEFETA EMI

Ke / P

&

MOTS'ELISI

PFC TS'ELISO

HO FETOHA MATLA

OTP

OLP

PWM & PFC LAOLI

LITLHAKISO LE
MOHLASI

Fosc ea PFC: 50 ~ 120KHz PWM fosc : 60 ~ 130KHz

OLP

TS'ELISO TS'OOLO

LEMOHANG LETS'OA

+V -V DIM+ DIM-

OVP

Tlhaloso ea Mechini
Mofuta-Mofuta

Nyeoe No. PWM-120

Yuniti:mm Mamello:±1

300±20

AC/L(Sootho) AC/N(Putsoa)

50±3 SJTW 18AWG×2C

5

191 5

63 31.5

2-4.5

T case tc

95.5

5
tc: max. Case Mocheso

5

300±20

UL2464 18AWG×2C SJTW 14AWG×2C 50±3

DIM+(Purple) DIM-(Pinki) +V(Khibidu) -V(E Ntsho)

37.5

3

DA/DA2-Mofuta

300±20

AC/L(Sootho) AC/N(Putsoa)

50±3
SJOW 17AWG×2C &H05RN-F 1.0mm2

5

191 5

63 31.5

2-4.5

T case tc

95.5

5
tc: max. Case Mocheso

5

300±20 UL2464 18AWG×2C SJOW 17AWG×2C 50±3 &H05RN-F 1.0mm2

DA+(Purple) DA-(Pinki) +V(Sootho) -V(Putsoa)

37.5

3

File Lebitso: PWM-120-SPEC 2024-09-25

120W PWM Output LED Driver
Khothaletsa Tataiso ea ho Nyoloha
Tlhokahalo ea Manual bakeng sa mofuta oa Blank

Letoto la PWM-120

AC/L(BROWN) AC/N(BUPUTSO)

DIM-(P-INK) +
DIM+(PURPLE)
-V(NTHO) +
+V(RED)

0 ~ 10Vdc kapa 10V PWM kapa ho hanyetsa Dimmer kapa DALI Dimmer
Letlapa la LED

Litlhokomeliso Pele u qala mosebetsi ofe kapa ofe oa ho kenya kapa oa ho lokisa, ka kopo, hakolla phepelo ea motlakase setsing sa motlakase. Netefatsa
hore e ke ke ea kopanngoa hape ka phoso! Boloka moea o nepahetseng ho potoloha yuniti 'me u se ke ua beha ntho leha e le efe holim'a eona. Hape, sebaka sa 10-15 cm se tlameha ho bolokoa neng
sesebelisoa se haufi ke mohloli oa mocheso. Ho phahamisa litloaelo ntle le mokhoa o tloaelehileng kapa ho sebetsa tlas'a mocheso o phahameng oa tikoloho ho ka eketsa
mocheso oa karolo e ka hare 'me o tla hloka ho fokotsa tekanyo ea tlhahiso ea hona joale. Lintlha tsa hajoale tsa thapo e amohetsoeng ea mantlha / ea bobeli e lokela ho ba kholo ho feta kapa e lekane le ea yuniti. Ka kopo, sheba
ho ea ka tlhaloso ea eona. Bakeng sa bakhanni ba LED ba nang le likhokahano tse sa keneleng metsi, netefatsa hore khokahano lipakeng tsa yuniti le sesebelisoa sa mabone ke
e tiileng e le hore metsi a se ke a kenella tsamaisong. Bakeng sa bakhanni ba LED ba nyenyefatsang, etsa bonnete ba hore selaoli sa hau sa dimming se khona ho khanna likarolo tsena.PWM series
hloka 0.15mA yuniti ka 'ngoe. Tc max. e khetholloa holim'a leibole ea sehlahisoa. Ka kopo etsa bonnete ba hore mocheso oa ntlha ea Tc o ke ke oa feta moeli. U SE KE UA hokela "DIM- ho -V". E loketse ts'ebeliso ea kahare kapa ts'ebeliso ea kantle ntle le khanya ea letsatsi e tobileng. Ka kopo qoba ho qoelisoa ka metsing ho feta metsotso e 30
metsotso. Phepelo ea motlakase e nkuoa e le karolo e tla sebetsoa hammoho le lisebelisoa tsa ho qetela. Ho tloha ka EMC
ts'ebetso e tla angoa ke ho kengoa ka botlalo, baetsi ba lisebelisoa tsa ho qetela ba tlameha ho tšoaneleha hape EMC Directive mabapi le ho kenya ka botlalo hape.

File Lebitso: PWM-120-SPEC 2024-09-25

Litokomane / Lisebelisoa

HO BOLELA HONA PWM-120 Series 120W Constant Voltage Output LED Driver [pdf] Buka ea Mong'a PWM-120-12, PWM-120-24, PWM-120-36, PWM-120-48, PWM-120 Series 120W Constant Vol.tage Output LED Driver, PWM-120 Series, 120W Constant Voltage Output LED Driver, Constant Voltage Output LED Driver, Moqtage Output LED Driver, Output LED Driver, LED Driver, Driver

Litšupiso

• Bukana ea Mosebelisi