Baby Einstein Airplane Adventure™ 2-in-1 Activity Jumper

Important Safety Information

WARNING: To prevent serious injury or death, ensure the child meets all of the following conditions:

• At least 6 months of age.
• Can sit up unassisted.
• Less than 30" tall (76.2 cm).
• Weighs less than 25 lbs (11 kg).

DO NOT use the product in dangerous conditions or situations:

• Do not allow children who can stand or walk on their own to sit in the seat.
• ALWAYS keep child in view while in the product. Never leave child unattended.
• NEVER move the unit while the child is in the seat.
• DO NOT add additional strings or straps.
• DO NOT use any hardware or parts other than supplied.
• DO NOT use the product as a swing.
• Ensure the child is correctly and safely positioned.
• Allow use only for short periods (20-minute intervals).
• It can be dangerous to allow other children to play near the product.
• Ensure height adjustments on legs are at the same level before placing child in product.

FALL HAZARD: Babies can fall from the unit resulting in head injuries.

• NEVER leave child unattended. ALWAYS keep child in view.
• NEVER use near stairs.
• Place the product on a flat, level surface to avoid tip over.
• DO NOT place the product on an elevated surface.
• A child's movement can slide the product.

STRANGULATION HAZARD: Strings can cause strangulation.

• DO NOT place items with a string around a child's neck, such as hood strings or pacifier cords.
• DO NOT suspend strings over product or attach strings to toys.
• For indoor use only.
• Do not swing or spin child in product.

IMPORTANT:

• Adult assembly required.
• Read all instructions before assembly and use.
• Care should be taken in unpacking and assembly.
• Examine product frequently for damaged, missing, or loose parts.
• DO NOT use product if any parts are missing, damaged, or broken.
• Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.

Battery Information

This product requires (3) size AA (1.5V) alkaline batteries (not included).

CAUTION: Follow the battery guidelines in this section. Otherwise, battery life may be shortened, or the batteries may leak or rupture.

• Always keep batteries away from children.
• Do not mix old and new batteries.
• Do not mix alkaline, standard, or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Install batteries so that the polarity of each one matches the markings in the battery compartment.
• Do not short-circuit the batteries.
• Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
• Remove exhausted batteries from the battery compartment.
• Never attempt to recharge a battery unless it is specifically marked "rechargeable.”
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not use rechargeable alkaline batteries in a Ni-Cad or Ni-MH battery charger.
• Please use the correct disposal method for batteries.
• Remove batteries before putting the product into storage for a prolonged period of time.
• Weak batteries cause erratic product operation, including distorted sound, dimming or failing light, and slow or non-working motorized parts. Replace batteries when any function fails to operate.
• Do not dispose of product or batteries in fire, batteries may explode or leak.
• This symbol ⚠️ indicates that the product is not to be disposed of in household waste, as batteries contain substances that can be damaging to the environment and health. Contact local authority for recycling and collection information.

Care and Cleaning

• Seat pad: Machine wash the fabric seat in cold water. Use a gentle wash cycle with no bleach. Tumble dry, using low heat.
• Plastic Parts: Wipe clean with damp cloth and mild soap. Air dry. Do not immerse in water.
• Frame: Wipe the metal frame with soft, clean cloth and mild soap.

Parts List and Drawing

The product includes the following parts:

• 1. Propeller: Hélice
• 2. Toy Station: Centro de actividades
• 3. Seat Ring: Aro para asiento
• 4. Seat Pad: Almohadilla para asiento
• 5. Play Surface: Superficie de juego
• 6. Base tube: Tubo de la base
• 7. Metal Arm with Spring: Brazo de metal con resorte
• 8. Hanging Sun Toy: Colgante con forma de sol
• 9. Crinkle Disk: Disco crujiente
• 10. Cloud Topper: Nube
• 11. Roller Ball Toy: Juguete giratorio
• 12. Bead Chaser Stalk Toy: Sonajero-monóculo
• 13. Flash card: Tarjetas

Assembly Instructions

Follow these steps for assembly:

1. Attach the propeller (1) to the toy station (2).
2. Insert batteries (3x AA/LR6 1.5V) into the battery compartment of the toy station (4), ensuring correct polarity. Secure the battery compartment cover (5).
3. Attach the seat ring (3) to the play surface (5).
4. Place the seat pad (4) onto the seat ring (3).
5. Secure the seat pad (4) by attaching it to the base tube (6) using the provided fasteners (x7).
6. Attach the toy station assembly (5) to the base tube assembly (6).
7. Attach the metal arms with springs (7) to the toy station assembly.
8. Attach the hanging toys (8, 9, 10, 11, 12, 13) to the metal arms.

Operating Instructions

Adjusting the Seat Height: Ensure the jumper seat height is correctly adjusted so the child is not flat-footed.

Mode Control: Use the Language Button to select modes. Options include Discovery, Composer, and Sports.

Volume Control: Adjust volume to Low, Medium, or High.

Care and Cleaning

Seat Pad: Machine wash in cold water on a gentle cycle without bleach. Tumble dry on low heat.

Plastic Parts: Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.

Frame: Wipe the metal frame with a soft, clean cloth and mild soap.

Storage

To store the activity jumper, follow these steps:

1. Disassemble the unit as shown in the diagrams.
2. Fold the unit for compact storage.

FCC Statement / CAN ICES-3 (B) / NMB-3(B)

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.