Memphis Audio M Series Car Speakers

Wiring Instructions

M Series Coaxial Wiring

This section details the wiring for coaxial speaker setups. The diagram illustrates connections between the audio source (input), crossover, woofer, and tweeter.

• Input: Connects to the audio source (e.g., amplifier or head unit).
• Crossover: Splits the audio signal for the woofer and tweeter. It has input terminals and output terminals for both components.
• Woofer: Connects to the crossover's woofer output terminals (typically labeled WF+ and WF-).
• Tweeter: Connects to the crossover's tweeter output terminals (typically labeled TW+ and TW-).
• TW Jumper: Indicates settings for the tweeter output on the crossover.

M Series Component Wiring

This section details the wiring for component speaker setups, where the woofer and tweeter are separate units.

• Woofer: Connects to the crossover's woofer output terminals (WF+ and WF-).
• Tweeter: Connects to the crossover's tweeter output terminals (TW+ and TW-).
• Crossover: Receives the input signal and directs appropriate frequencies to the woofer and tweeter.
• Wiring: Diagrams show the flow from input to crossover, and then to the individual woofer and tweeter components.

Convertible Speaker Instructions

The M Series speakers are convertible, meaning their configuration can be adapted. Convertible parts, such as the MSCKIT, are sold separately.

Tweeter Removal

The tweeter assembly can be removed from the main speaker body. This process typically involves releasing clips or unscrewing the tweeter module.

Phase Plug Installation

The phase plug, located at the center of the woofer, can be replaced. This is part of the convertible functionality, allowing for different speaker configurations.

Tweeter Mounting Instructions

Instructions are provided for mounting the M Series tweeters in various configurations.

Tweeter Removal

The tweeter is shown being disassembled from its housing for mounting purposes.

Mounting Options

• Angled Mounting: The tweeter is mounted using an angled base, which is then attached to a panel. This allows for directing sound.
• Flush Mounting: The tweeter is installed so that its front surface is level with the mounting panel. This often involves a retaining ring for secure fitting.
• Surface Mounting: The tweeter is mounted directly onto the surface of a panel using a flat base.

Crossover Mounting

Instructions for mounting the crossover unit using the M-Clip system.

1. Screw the M-CLIP [fastener] into the L-bracket.
2. Slide the crossover unit onto the M-CLIP.
3. Screw the L-bracket (with the attached M-CLIP and crossover) into the designated mounting holes on the back of the woofer magnet.
4. The crossover can be easily removed from the M-CLIP by sliding it upwards away from the magnet.

MClass Speaker Warranty

Memphis Audio offers a limited warranty on its M Class speaker products.

Length of Warranty

The warranty covers defects in material or workmanship for 3 years from the date of purchase, provided the product was installed by an authorized Memphis Audio Dealer. If purchased but not installed by an authorized dealer, the warranty period is one year. The warranty is void if the product is physically damaged due to improper use or abuse, or if unauthorized repairs have been attempted.

Coverage and Eligibility

• This warranty applies only to Memphis Audio products sold to consumers by Authorized Memphis Audio Dealers in the United States of America or its possessions.
• It covers the original purchaser of the product purchased from an Authorized Memphis Audio Dealer in the United States.
• Proof of purchase (a copy of the receipt detailing consumer name, dealer name, product, and date) is required for service.
• Products found to be defective within the warranty period will be repaired or replaced with an equivalent product at Memphis Audio's discretion.

Exclusions (What Is Not Covered)

• Damage caused by accident, abuse, improper operation or installation, water, theft, or shipping.
• Any cost or expense related to the removal or reinstallation of the product.
• Service performed by anyone other than Memphis Audio.
• Products with defaced, altered, or removed serial numbers.
• Subsequent damage to other components.
• Products purchased outside the US.
• Products not purchased from an authorized Memphis Audio Dealer.

Implied Warranties

Any implied warranties, including warranties of fitness for use and merchantability, are limited in duration to the period of this express warranty. Some states may not allow limitations on the length of implied warranties.

EU Warranty

This product meets current EU warranty requirements. Consult your Authorized dealer for details.

How To Obtain Service

• Contact the Authorized Memphis Audio Dealer from whom you purchased the product.
• For further assistance, call Memphis Audio Customer Service at [phone] 800-489-2300.
• Important: A Return Authorization (RA#) must be obtained before returning any product to Memphis Audio's warranty facility. No product will be accepted without an RA#.
• The customer is responsible for the shipment of the product to Memphis Audio. Repaired and replaced products will be returned freight prepaid.

For more information, visit: WWW.MEMPHISCARAUDIO.COM

Established 1965, Memphis, TN USA.

Contact Information

• Address: 122 GAYOSO AVE, MEMPHIS, TN USA 38101
• Tech Support: [phone] 800-903-6979
• Website: [website] WWW.MEMPHISCARAUDIO.USA
• Social Media: [social media] @MEMPHISCARAUDIO, @MEMPHISCARAUDIOUSA