LTECH LT-DMX-1809 DMX-SPI Signal Decoder
LT-DMX-1809 DMX-SPI Signal Decoder
LT-DMX-1809 e fetola lets'oao le tloaelehileng la DMX512 hore e be lets'oao la dijithale la SPI (TTL) ho khanna li-LED tse nang le IC ea ho khanna e tsamaisanang, e ka laola mocha o mong le o mong oa mabone a LED, 'me ea hlokomela 0 ~ 100% ho fifala kapa ho hlophisa mefuta eohle ea litlamorao tse fetohang. . Li-decoder tsa DMX-SPI li sebelisoa haholo maboneng a lithapo tsa lentsoe tse benyang tsa LED, mabone a matheba a LED, likhoele tsa SMD, li-tubes tsa dijithale tsa LED, mabone a lebota la LED, li-skrini tsa pixel tsa LED, mabone a Hi-power, mabone a likhohola, jj.
Parameter ea lihlahisoa
LT-DMX-1809
- Letšoao la ho Kena: DMX512
- Keletso Voltage: 5~24Vdc
- Letšoao la Phallo: SPI
- Mecha ea ho khetholla: Likanale tse 512 / Unit
- DMX512 Socket: XLR-3, Terminal e Tala
- Lekhalo le fokolang: 0 ~ 100%
- Mocheso o sebetsang: -30 ℃ ~ 65 ℃
- Litekanyo: L125×W64×H40(mm)
- Boholo ba Sephutheloana: L135×W70×H50(mm)
- Boima ba 'mele (GW): 300g
E lumellana le WS2811/2812 UCS1903/1909/1912/2903/2909/2912 TM1803/1804/TM1809/1812 ho khanna IC)
Sets'oants'o sa tlhophiso
Tlhaloso ea Boema-kepe
| Che. | Boema-kepe | Mosebetsi | |
| 1 | Boema-kepe ba ho Kena ka Matla | DC+ | 5-24Vdc phepelo ea matla a LED |
| DC- | |||
|
2 |
Output Port Connect LED |
DC+ | Anode ea phepelo ea matla a LED |
| DATA | Cable ea data | ||
| CLK | Cable ea oache (N/A) | ||
| GND | Cable ea fatše (DC-) | ||
Ts'ebetso ea Dip Switch
Mokhoa oa ho beha aterese ea DMX ka dip switch:
- THABO=TLOA (mokhoa oa bo-10 oa ho qoela=O tima) Mokhoa oa DMX
Decoder e kena mokgweng wa taolo ya DMX ka boyona ha e amohela letshwao la DMX.
Joalo ka palo ho ea holimo: FUN=OFF ke lebelo le holimo(ho ea holimo), FUN=ON ke lebelo le tlase (ho ea tlase)
- The drive chip ea decoder ena e na le likhetho tsa lebelo le phahameng le le tlase (800K / 400K), ka kopo khetha lebelo le loketseng ho latela moralo oa mabone a hau a LED, hangata ke lebelo le phahameng.
- Boleng ba aterese ea DMX = kakaretso ea boleng ba (1-9), ho fumana boleng ba sebaka ha u le boemong ba "ho", ho seng joalo e tla ba 0.
Mokhoa oa ho itlhahloba:
Ha ho se lets'oao la DMX le FUN=ON (the 10th dip switch=ON) Mokhoa oa ho itlhahloba
| Dip Fetoha | 1–9=tima | 1=on | 2=on | 3=on | 4=on | 5=on | 6=on | 7=on | 8=on | 9=on |
| Boiketsi ba ho itlhatlhoba Mosebetsi | E motsho o tsitsitseng | Bofubelu bo sa fetoheng | Tala Green | Blue e tsitsitseng | Yellow Yellow | Pherese e tsitsitseng | Cyan e tsitsitseng | White e tsitsitseng | 7 Mebala ea Ho qhoma | 7 Mebala e Boreleli |
Bakeng sa liphetoho tse fetohang (Dip Switch 8/9=ON): DIP switch 1-7 e sebelisoa ho hlokomela maemo a 7 a lebelo. (7=ON, boemo bo potlakileng)
[Attn] Ha li-switches tse 'maloa tsa dip li BUTSE, li tlas'a boleng bo phahameng ka ho fetisisa. Joalokaha setšoantšo se ka holimo se bontša, phello e tla ba mebala e 7 e boreleli boemong ba 7 lebelo.
Setšoantšo sa Wiring
Setšoantšo sa mohala oa mohala oa pixel oa LED
- A. Mokhoa o tloaelehileng oa ho hokahanya.
- B. Mokhoa o khethehileng oa ho hokahanya - lisebelisoa tse khanyang le molaoli o sebelisang matla a fapaneng a ho sebetsatages.
Setšoantšo sa mohala oa DMX
*A ampLifier lia hlokahala ha li-decoder tse fetang 32 li hokahantsoe, lets'oao amplification ha ea lokela ho feta makhetlo a 5 ka ho tsoelang pele.
Tlhokomeliso:
- Sehlahisoa se tla kenngoa le ho sebeletsoa ke motho ea nang le tsebo.
- Sehlahisoa sena ha se kenelle metsi. Ka kopo qoba letsatsi le pula. Ha e kentsoe ka ntle ka kopo etsa bonnete ba hore e kentsoe ka har'a sebaka se thibelang metsi.
- Ho senya mocheso o motle ho tla lelefatsa bophelo ba mosebetsi oa molaoli. Ka kopo netefatsa moea o motle.
- Ka kopo sheba hore na sephetho sa voltage ea phepelo ea motlakase ea LED e sebelisitsoeng e lumellana le matla a sebetsangtage ea sehlahisoa.
- Ka kopo netefatsa hore thapo e lekaneng e sebelisoa ho tloha ho molaoli ho ea ho mabone a LED ho tsamaisa hona joale. Hape ka kopo netefatsa hore thapo e sirelelitsoe ka thata sehokelong.
- Netefatsa hore likhokahano tsohle tsa terata le polarities li nepahetse pele o kenya motlakase ho qoba tšenyo leha e le efe ea mabone a LED.
- Haeba phoso e hlaha, ka kopo khutlisetsa sehlahisoa ho morekisi oa hau. Se ke oa leka ho lokisa sehlahisoa sena u le mong.
Tumellano ea Waranti
Re fana ka thuso ea mahlale a bophelo bohle ka sehlahisoa sena:
- Tiisetso ea lilemo tse 5 e fanoa ho tloha ka letsatsi la theko. Tiisetso ke ea tokiso ea mahala kapa e nchafalitsoeng haeba e koahela liphoso tsa tlhahiso feela.
- Bakeng sa liphoso tse fetang tiisetso ea lilemo tse 5, re na le tokelo ea ho lefisa nako le likarolo.
Likhetho tsa Warranty ka tlase:
- Tšenyo efe kapa efe e entsoeng ke motho e bakoang ke ts'ebetso e sa lokelang, kapa ho hokela ho matla a feteletsengtage le overloading.
- Sehlahisoa se bonahala se e-na le tšenyo e feteletseng 'meleng.
- Tšenyo e bakoang ke likoluoa tsa tlhaho le force majeure.
- Lileibole tsa tiisetso, lileibole tse senyehang habonolo, le li-barcode tse ikhethang li senyehile.
- Sehlahisoa se nketsoe sebaka ke sehlahisoa se secha.
Ho lokisa kapa ho chencha joalo ka ha ho fanoe ka tiisetso ena ke pheko e khethehileng ho moreki. Re ke ke ra jara boikarabello bakeng sa tšenyo efe kapa efe ea tšohanyetso kapa ea litlamorao bakeng sa ho tlola taelo efe kapa efe ea tiisetso ena.
Tokiso kapa tokiso efe kapa efe ho tiisetso ena e tlameha ho amoheloa ka lengolo ke k'hamphani ea rona feela.
Bukana ena e sebetsa feela ho mohlala ona. Re na le tokelo ea ho etsa liphetoho ntle le tsebiso pele.
www.ltech-led.com
Litokomane / Lisebelisoa
 |
LTECH LT-DMX-1809 DMX-SPI Signal Decoder [pdf] Bukana ea Mosebelisi LT-DMX-1809 DMX-SPI Signal Decoder, LT-DMX-1809, DMX-SPI Signal Decoder, Signal Decoder, Decoder |
