LTECH DMX-SPI Signal Decoder LT-DMX-1809 Bukana ea Mosebelisi

LT-DMX-1809 DMX-SPI Signal Decoder

LT-DMX-1809 e fetola lets'oao le tloaelehileng la DMX512 hore e be lets'oao la dijithale la SPI (TTL) ho khanna li-LED tse nang le IC ea ho khanna e lumellanang, e ka laola mocha o mong le o mong oa mabone a LED, ea hlokomela 0 ~ 100% ho fifala kapa ho hlophisa mefuta eohle ea litlamorao tse fetohang.

Li-decoder tsa DMX-SPI li sebelisoa haholo maboneng a lebone la mantsoe a benyang a LED, leseli la letheba la LED, lesela la SMD, li-tubes tsa dijithale tsa LED, lebone la lebota la LED, skrini sa pixel ea LED, khanya ea matla a Hi-power, leseli la likhohola, jj.

Litaba pata

1 Paramethara ea Sehlahisoa:

2 Sets'oants'o sa tlhophiso:

3 Output Port Definition:

4 Ts'ebetso ea Dip Switch:

5 Setšoantšo sa Wiring:

6 Tlhokomeliso:

7 Tumellano ea Tiisetso:

8 Litokomane / Lisebelisoa

8.1 Litšupiso

9 Related Posts

Paramethara ea Sehlahisoa:

Pontšo ea ho kenya:	DMX512	Dimming Range:	0~100%
Keletso Voltage:	5 ~ 24Vdc	Mocheso oa Mosebetsi:	-30 ℃ ~ 65 ℃
Lets'oao la Tlhahiso:	SPI	Boholo:	L125×W64×H40(mm)
Manane a ho Decoding:	512 Channels/Unit	Boholo ba Sephutheloana:	L135×W70×H50(mm)
DMX512 Socket:	3-pin XLR, Terminal e Tala	Boima ba 'mele (GW):	300g

Compatible with WS2811/WS2812/WS2812B, UCS1903/UCS1909/UCS1912/UCS2903/UCS2909/UCS2912 TM1803/ TM1804/TM1809/1812/
GS8206(BGR)/SM16703
ho khanna IC.
Hlokomela: boemo bo bohlooho ho tloha ho tse ntle kapa tse mpe ho latela mefuta ea IC, ha se letho ka ts'ebetso ea LT-DMX-1809 decoder.

Sets'oants'o sa tlhophiso:

Output Port Definition:

Che.	boemakepe		Mosebetsi
1	Phepelo ea motlakase Boema-kepe ba Kena	DC+	5-24Vdc phepelo ea matla a LED
1	Phepelo ea motlakase Boema-kepe ba Kena	DC-	5-24Vdc phepelo ea matla a LED
2	Khumo Port Hokela LED	DC+	Anode ea phepelo ea matla a LED
		DATA	Cable ea data
		CLK	Cable ea oache IN/Al
		GND	thapo ea fatše IDC-)

Ts'ebetso ea Dip Switch:

4.1 Mokhoa oa ho beha aterese ea DMX ka dip switch:
THABO=TLOA (the 10th dip switch=OFF) Mokhoa oa DMX

Decoder e kena mokgweng wa taolo ya DMX ka boyona ha e amohela letshwao la DMX. Joalo ka palo ho ea holimo: FUN=OFF ke lebelo le holimo(holimo), FUN=ON ke lebelo le tlase (ho ea tlase)

The drive chip ea decoder ena e na le likhetho bakeng sa lebelo le phahameng le le tlase (800K/400K), ka kopo khetha lebelo le loketseng ho latela moralo oa mabone a hau a LED, hangata ke lebelo le holimo.

Boleng ba aterese ea DMX = kakaretso ea boleng ba (1-9), ho fumana boleng ba sebaka ha u le "ho" boemong, ho seng joalo e tla ba 0.

4.2 Mokhoa oa ho itlhahloba:
Ha ho se lets'oao la DMX, Mokhoa oa ho itlhahloba

Dip switch,	1-9=theolelo	1 = ka	2=ka	3=ka	4=ka	5=ka	6=ka	7=ka	8=ka	9=ka
Boiketsi ba ho itlhatlhoba Mosebetsi	E tsitsitseng Ntsho	E tsitsitseng Khubedu	E tsitsitseng Botala	E tsitsitseng Boputsoa	E tsitsitseng Bosehla	E tsitsitseng Bopherese	E tsitsitseng Cyan	E tsitsitseng Bosoeu	7 Mebala Ho qhoma	7 Mebala Boreleli

Bakeng sa liphetoho tse fetohang (Dip Switch 8 9=ON):/ DIP switch 1-7 e sebelisoa ho lemoha maemo a 7-speed. (7=ON, boemo bo potlakileng)

[Attn] Ha li-switches tse 'maloa tsa dip li BUTSE, li tlas'a boleng bo phahameng ka ho fetisisa. Joalokaha setšoantšo se ka holimo se bontša, phello e tla ba mebala e 7 e boreleli boemong ba 7-speed.

Setšoantšo sa Wiring:

5.1 Setšoantšo sa wiring ea pixel ea LED.
A. Mokhoa o tloaelehileng oa ho hokahanya.

B. Mokhoa o khethehileng oa ho hokahanya - lisebelisoa tse khanyang le molaoli o sebelisang matla a fapaneng a ho sebetsatages.

5.2 setšoantšo sa marang-rang sa DMX.

*A ampLifier lia hlokahala ha li-decoder tse fetang 32 li hokahantsoe, lets'oao amplification ha ea lokela ho feta makhetlo a 5 ka ho tsoelang pele.

Tlhokomeliso:

6.1 Sehlahisoa se tla kenngoa le ho sebeletsoa ke motho ea nang le tsebo.
6.2 Sehlahisoa sena ha se kenelle metsi. Ka kopo qoba letsatsi le pula. Ha e kentsoe ka ntle ka kopo etsa bonnete ba hore e kentsoe ka har'a sebaka se thibelang metsi.
6.3 Ho senya mocheso o motle ho tla lelefatsa bophelo ba mosebetsi oa molaoli. Ka kopo netefatsa moea o motle.
6.4 Ka kopo, sheba hore na sephetho sa voltage ea phepelo ea motlakase ea LED e sebelisoang e lumellana le matla a sebetsangtage ea sehlahisoa.
6.5 Ka kopo netefatsa hore thapo e lekaneng ea boholo e sebelisoa ho tloha ho molaoli ho ea ho mabone a LED ho tsamaisa hona joale. Hape ka kopo netefatsa hore thapo e sirelelitsoe ka thata sehokelong.
6.6 Netefatsa hore likhokahano tsohle tsa terata le polarities li nepahetse pele u sebelisa matla ho qoba tšenyo leha e le efe ea mabone a LED.
6.7 Haeba phoso e hlaha, ka kopo khutlisetsa sehlahisoa ho morekisi oa hau. Se ke oa leka ho lokisa sehlahisoa sena u le mong.

Tumellano ea Tiisetso:

7.1 Re fana ka thuso ea tekheniki bophelo bohle ka sehlahisoa sena:

Tiisetso ea lilemo tse 5 e fanoa ho tloha ka letsatsi la theko. Tiisetso ke ea tokiso ea mahala kapa e nchafalitsoeng haeba e koahela liphoso tsa tlhahiso feela.

Bakeng sa liphoso tse fetang tiisetso ea lilemo tse 5, re na le tokelo ea ho lefisa nako le likarolo.
7.2 Mekhaollo ea tiisetso e ka tlase:
Tšenyo efe kapa efe e entsoeng ke motho e bakoang ke ts'ebetso e sa nepahalang, kapa ho hokela ho matla a feteletsengtage le overloading.

Sehlahisoa se bonahala se e-na le tšenyo e feteletseng 'meleng.
Tšenyo e bakoang ke likoluoa tsa tlhaho le force majeure.

leibole ea tiisetso, leibole e senyehang habonolo, le leibole e ikhethang ea barcode li senyehile.
Sehlahisoa se nketsoe sebaka ke sehlahisoa se secha.
7.3 Ho lokisa kapa ho nchafatsa joalo ka ha ho fanoe ka tiisetso ena ke pheko e khethehileng ho moreki. Re ke ke ra jara boikarabello bakeng sa ts'enyehelo ea tšohanyetso kapa ea litlamorao bakeng sa ho tlola molao ofe kapa ofe oa tiisetso ena.
7.4 Tokiso kapa tokiso efe kapa efe ho tiisetso ena e tlameha ho amoheloa ka lengolo ke khamphani ea rona feela.