LTECH DMX-SPI Signal Decoder LT-DMX-1809 User Manual

LT-DMX-1809 DMX-SPI Fa'ailoga Fa'ailoga

LT-DMX-1809 liua le tulaga lautele DMX512 faailoilo i le SPI (TTL) faailo numera e tulia LED ma IC avetaavale talafeagai, e mafai ona pulea ala uma o le moli LED, iloa 0 ~ 100% dimming pe faasaʻo ituaiga uma o suiga aafiaga.

DMX-SPI decoders e masani ona faʻaaogaina i le faʻamalamalamaina o le moli o le upu moli, moli mataʻitusi taʻitaʻia, SMD strip, faʻamalama numera taʻitaʻia, moli puipui taʻitaʻia, mata pika pika, moli eletise, moli lolo, ma isi.

Mataupu lalafi

1 Fua Fa'atatau:

2 Fa'atusa ata:

3 Fa'amatalaga o le Taulaga Fa'aaogā:

4 Fa'agaioiga Su'i Dip:

5 Ata uaea:

6 Fa'alogo:

7 Maliega Fa'amaonia:

8 Pepa / Punaoa

8.1 Fa'asinomaga

9 Fa'amatalaga Fa'atatau

Fua Fa'atatau:

Faailoga o Faʻamaumauga:	DMX512	Va'aiga fa'apouliuli:	0~100%
Sao Voltage:	5~24Vdc	Galulue Vevela:	-30℃~65℃
Fa'ailoga Fa'ailoga:	SPI	itu:	L125×L64×L40(mm)
Fa'avasegaga ala:	512 Auala/Iunite	Tele le afifi:	L135×L70×L50(mm)
DMX512 Socket:	3-pin XLR, Mea Meamata	Mamafa (GW):	300g

Compatible with WS2811/WS2812/WS2812B, UCS1903/UCS1909/UCS1912/UCS2903/UCS2909/UCS2912 TM1803/ TM1804/TM1809/1812/
GS8206(BGR)/SM16703
ave taavale IC.
Fa'aaliga: lanu efuefu mai le sili pe sili ona leaga e faalagolago i ituaiga IC, e leai se mea i le LT-DMX-1809 decoder faatinoga.

Fa'atusa ata:

Fa'amatalaga o le Taulaga Fa'aaogā:

Leai.	uafu		Galuega
1	Paoa sapalai Taulaga Ulufale	DC+	5-24Vdc ta'ita'i mana tu'uina atu
1	Paoa sapalai Taulaga Ulufale	DC-	5-24Vdc ta'ita'i mana tu'uina atu
2	Galuega Faatino Port Faʻafesoʻotaʻi le LED	DC+	fa'apogai tu'uina atu le mana fa'aola
		FA'AMATALAGA	Uaea fa'amaumauga
		CLK	Uaea uati IN/Al
		GND	Uaea eleele IDC-)

Fa'agaioiga Su'i Dip:

4.1 Faʻafefea ona seti le tuatusi DMX e ala i le suʻeina o ki:
FUN=OFF (le 10th dip switch=OFF) DMX Mode

E otometi lava ona ulufale le Decoder i le DMX control mode pe a maua le DMX signal. Pei o le ata agai i luga: FUN=OFF e maualuga le saoasaoa (luga), FUN=ON e maualalo le saoasaoa (lalo)

O le taʻavale taʻavale a lenei decoder e iai filifiliga mo le maualuga ma le maualalo o le saoasaoa (800K / 400K), faʻamolemole filifili le saoasaoa talafeagai e tusa ai ma le mamanu o au moli LED, i le tele o tulaga, e maualuga le saoasaoa.

DMX address value = le aofaʻiga o le (1-9), e maua ai le tau o le nofoaga pe a i ai i le tulaga "i luga", a leai o le 0.

4.2 Faiga su'ega a le tagata lava ia:
A leai se faailo DMX, Faiga Su'ega a le tagata lava ia

Su'e Su'e,	1-9=tuu ese	1 = luga	2=i	3=i	4=i	5=i	6=i	7=i	8=i	9=i
Su'ega a le tagata lava ia Galuega	Static Lanu uliuli	Static Lanu mumu	Static Lanu meamata	Static Lanu moaga	Static Lanu samasama	Static Lanu viole	Static Cyan	Static Lanu pa'epa'e	7 Lanu osooso	7 Lanu lamolemole

Mo suiga suiga (Dip Switch 8 9=ON):/ DIP switch 1-7 e fa'aaogaina e iloa ai le 7-saosaoa tulaga. (7=ON, le tulaga sili ona vave)

[Attn] Pe a ON le tele o ki, e fa'atatau i le tau maualuga ole ki. E pei ona faʻaalia e le ata o loʻo i luga, o le aʻafiaga o le a 7 lanu lamolemole i le 7-saosaoa tulaga.

Ata uaea:

5.1 fa'ata'ita'iga fa'alava fa'alava fa'alava pika.
A. Auala feso'ota'iga masani.

B. Auala fesoʻotaʻiga faʻapitoa - moli moli ma le pule e faʻaaoga ai vol galue eseesetages.

5.2 DMX uaea ata.

* O se ampe manaʻomia le lifier pe a sili atu nai lo le 32 decoders e fesoʻotaʻi, faailo ampe le tatau ona sili atu i le 5 taimi faifaipea.

Fa'alogo:

6.1 O le oloa e tatau ona faʻapipiʻiina ma tautuaina e se tagata agavaa.
6.2 O lenei oloa e le fa'afefeteina. Faamolemole aloese mai le la ma le timu. A fa'apipi'i i fafo fa'amolemole fa'amautinoa o lo'o fa'apipi'i i totonu o se pa e le susu.
6.3 O le fa'amama lelei o le vevela o le a fa'aumiina ai le ola galue o le pule. Faamolemole ia mautinoa lelei le ea.
6.4 Fa'amolemole siaki pe o le voltagu o le fa'aogaina o le eletise fa'aaogaina e fa'atatau i le vol galuetagu o le oloa.
6.5 Fa'amolemole ia fa'amautinoa o lo'o fa'aogaina le tele o le uaea mai le fa'atonu i moli LED e ave ai le taimi nei. Fa'amolemole fa'amautinoa fo'i o lo'o fa'amau lelei le uaea ile so'oga.
6.6 Fa'amautinoa ua sa'o uma feso'ota'iga uaea ma polarities a'o le'i fa'aogaina le paoa e 'alofia ai so'o se fa'aleagaina o moli LED.
6.7 Afai e tupu se fa'aletonu, fa'amolemole toe fa'afo'i le oloa i lau fa'atau oloa. Aua e te taumafai e toe faaleleia lenei oloa na o oe.

Maliega Fa'amaonia:

7.1 Matou te tuʻuina atu fesoasoani faʻapitoa i le olaga atoa i lenei oloa:

E 5 tausaga le fa'amaonia mai le aso na fa'atau ai. O le warranty e mo le toe fa'aleleia e aunoa ma se totogi pe toe sui pe a na'o mea fa'aletonu o gaosiga.

Mo mea sese i tua atu o le 5-tausaga warranty, matou te faasaoina le aia tatau e totogi ai mo taimi ma vaega.
7.2 Tuusaunoaga fa'amaonia i lalo:
So'o se fa'aleagaina na faia e le tagata e mafua mai i le fa'agaioiga le talafeagai, po'o le feso'ota'i atu i le sili atu voltagu ma le anoanoaʻi.

O le oloa foliga mai ua i ai tele faʻaletino ua faʻaleagaina.
Faʻaleagaina ona o faʻalavelave faʻanatura ma le malosi majeure.

O igoa fa'amaonia, fa'ailoga ma'ale'ale, ma fa'ailoga fa'ailoga tulaga ese ua fa'aleagaina.
O le oloa ua suia e se ituaiga fou oloa.
7.3 Toe fa'aleleia po'o le toe sui e pei ona tu'uina atu i lalo o lenei fa'apolopolo o le fofo fa'apitoa mo le tagata fa'atau. O le a le noatia i matou mo soʻo se faʻalavelave faʻafuaseʻi poʻo faʻalavelave faʻaleagaina mo le solia o soʻo se aiaiga i totonu o lenei tusi saisai.
7.4 So'o se teuteuga po'o se fetuunaiga i lenei tusi saisai e tatau ona fa'amaonia tusitusia e le matou kamupani.