KMC E LAOLANG 5901 AFMS Ethernet User Guide

 

 

 

 

 

KMC Controls, 19476 Industrial Drive, New Paris, IN 46553 / 877-444-5622 / Fax: 574-831-5252 / www.kmccontrols.com

 

LIEKETSENG

Tokomane ena e tataisa basebelisi ka ho lefa le ho fana ka tsamaiso ea Sistimi ea Tekanyo ea Phallo ea Moea. E etselitsoe ho thusa ho phethela mesebetsi e ho Note Sheets bakeng sa AFMS Checkout and Commissioning.

Mefuta ea "E" AFMS e nang le Ethernet e nang le firmware ea morao-rao e ka hlophisoa ka web sebatli ho tsoa maqepheng a fanoeng ka har'a molaoli oa AFMS. Molaoli oa AFMS o na le litekanyetso tse latelang tsa liaterese tsa marang-rang:

• Aterese ea IP—192.168.1.251
• Subnet mask—255.255.255.0
• Gateway-192.168.1.1

HLOKOMELA: Sheba tataiso ea khetho ea AFMS bakeng sa tafole ea lisebelisoa tse ling tse ka sebelisoang ho hlophisa tse ling kapa li-parameter tsohle tsa AFMS.
ELA HLOKO: Aterese ea kamehla ea IP ea router ea BAC-5051(A)E ke 192.168.1.252.

 

KENYA MOFESE

Ho kena ho molaoli oa AFMS ka a web sebatli:

1. Hokela AFMS koung ea Ethernet ka ho etsa e 'ngoe ea tse latelang:
   • Hokela ka kotloloho khomphuteng, eo hangata e hlokang ho fetola aterese ya IP ya komporo. Sheba Ho Fetola Aterese ea Khomphuta ea Hao leqepheng la 20.
   • Hokela ho subnet e amohelang aterese 192.168.1.251.
2. Hokela matla ho molaoli. (Sheba tataiso ea ho instola ea AFMS.)
3. Bula fensetere e ncha ea sebatli.
4. Kenya aterese 192.168.1.251.
5. Ka fensetere ea ho kena, kenya tse latelang:
   • Lebitso la mosebedisi: admin
   • Password: admin
   ELA HLOKO: Skrine sa ho kena se tla fumaneha metsotsoana e ka bang 30 ka mor'a hore molaoli a qale bocha kapa a sebelise matla pele. (Sheba le Ho tsosolosa le
   Aterese ea IP e sa tsejoeng leqepheng la 19.
6. Ka mor'a ho kena, fetola li-parameter tsa molaoli kamoo ho hlokahalang.
   • Ho fetola diphasewete le ho eketsa basebedisi, sheba Fensetere ya Tshireletso leqepheng la 16.
   • Ho fetola aterese ea IP, sheba Fensetere ea Sesebelisoa leqepheng la 14.
   Ka mor'a ho kena, nako ea metsotso e leshome e qala. Sebapa-nako se khutlela ho metsotso e leshome bakeng sa efe kapa efe ea maemo ana:
   • Leqephe lea nchafatsoa kapa le bolokoa.
   • Lethathamo (ka lehlakoreng le letšehali la skrine) le tobetse ho ea leqepheng le fapaneng.
   • Ho benya ho Reset Session Timer (e hlahang metsotsong e mmedi pele nako ya ho kgaotsa e fela) e a sutumetswa.

 

MESEBETSI EA HO HLAHALA NTLHA-HO-HO

Mehato bakeng sa mosebetsi o mong le o mong oa ho tsoa ho ea ho ntlha e hlahisoa ka likaroloana tse ka tlase. Qetella mosebetsi/karolwana ka nngwe ka tatellano e hlahisitsweng.
Netefatsa Sesebelisoa se Nepahetseng bakeng sa Kemiso
HLOKOMELA: Sheba 'me (haeba ho hlokahala) fetola ts'ebeliso ea motheo tlas'a Khutlisa>
Fektheri pele o hlophisa li-setpoints kapa likhetho tse ling tsa sistimi. Ho fetola ts'ebeliso ea mantlha ho tla seta li-setpoints le likhetho tsa sistimi ho li-feme tsa bona tsa feme.

 

Etsa Phetoho ea Zero ea Khatello ea Khatello

Tlosa li-transducer tsohle tsa khatello (phepelo le thuso ea khatello) tse kentsoeng, ho latela litaelo tsa ho instola tsa moetsi oa tsona.

U tla hloka ho pepesa li-transducer tse phahameng le tse tlase ho khatello ea tikoloho ka ho tlosa li-tubing ka nakoana ho tloha likoung. Ka mor'a ho emisa transducer, kopanya tube e 'ngoe le e' ngoe boema-kepeng bo nepahetseng.

Beha Boemo ba Khatello ea Phano ea Phepelo ea Moea (5901- AFMS feela)

Tlas'a Ts'ebeliso> AFMS> Hlophisa, sehlopheng sa Kakaretso:

 

DAMPER SPAN CALIBRATION MESEBETSI

Kamora ho phethela Mesebetsi ea ho Lekola Ntlha-to-Point leqepheng la 4, lokisa d.ampspan. Mehato ea damper span calibration tasks li hlahisoa liropeng tse ka tlase. Qetella mosebetsi/karolwana ka nngwe ka tatellano e hlahisitsweng.

 

Haeba Damper Position e tlaleha litekanyetso tse fapaneng le tse kentsoeng tsa Damper
Setpoint, bona karolo e latelang, "Beha Ketso ea Inclinometer ho Fetola".

Beha Ketso ea Inclinometer ho khutlela morao (haeba ho hlokahala)

Bakeng sa ts'ebeliso e tloaelehileng (AMSO) kapa ts'ebeliso ea OAD Pressure Assist (AMSOP), haeba inclinometer e ne e behiloe moeeng o otlolohileng oa ho khutla d.amper lehare hobane moea o kantle damper li-blades li theohile, joale u hloka ho seta Inclinometer Action ho REVERSE.

Haeba tlhahlobo e senola hore Damper Position e tlaleha boleng bo fapaneng le Damper Setpoint (sheba karolo e fetileng), tlasa Kopo > AFMS > Hlophisa, ho Dampsehlopha sa rona:

1. Bakeng sa Ketso ea Inclinometer, khetha REVERSE ho tsoa ho menu e theoha.
2. Tobetsa Boloka.

(haeba ho hlokahala)

 

MOKHOA OA HO ITHUTA MESEBETSI

Mehato ea mosebetsi o mong le o mong oa mokhoa oa ho ithuta e hlahisoa liropeng tse ka tlase.
Qetella mosebetsi/karolwana ka nngwe ka tatelano e hlahisitsweng.

Mesebetsi e Hlokahalang
Pele o qala Mokhoa oa ho Ithuta, bakeng sa liphetho tse nepahetseng, etsa bonnete ba hore:

• Li-sensor li lekantsoe (Mesebetsi ea ho Lekola Ntlha-to-ntlha leqepheng la 4).
• AFMS e hlophisitsoe hantle (Damper Mesebetsi ea Tekanyo ea Span leqepheng la 7).
• Fense ea moea ea phepelo e sebetsa ka lebelo le tloaelehileng, le tsitsitseng (ntle le ho tsoma kapa li-spikes tsa nakoana).
• Haeba yuniti e na le lebili la ho khutlisa mocheso, lea tima.
• Haeba mehloli efe kapa efe ea ho futhumatsa kapa e pholileng e le kaholimo ho sensor ea MAT, lia tima.
• Haeba yuniti e na le tsela e fetang damper, e behiloe ho 100% e bulehileng.

Ho qala Mokhoa oa ho Ithuta
1. Eya ho Application > AFMS > Ithute.
2. Ela hloko hore na Learn Ready e tlaleha hore READY kapa HA E READY.
Haeba READY e hlahisoa, Mokhoa oa ho Ithuta o ka qalisoa ka letsoho. Ho seng joalo, bona Ho nolofaletsa Mokhoa oa ho Ithuta ho Qala ka Boiketsetso leqepheng la 11.
ELA HLOKO: Maemong a khethehileng, u ka ’na ua nahana ka Mokhoa o Mong oa ho Mathisa ho Ithuta leqepheng la 12.

 

Ka Bowena Ho Qala Mokhoa oa ho Ithuta

 

1. Tlohela Min Delta Temp e behiloe ho ea kamehla kapa fetola ha ho hlokahala.
   ELA HLOKO: Haeba ΔT e fetoha ka tlase ho Min Delta Temp, molaoli oa AFMS o tla tlosa Mokhoa oa ho Ithuta. Sena ke ho etsa bonnete ba hore molaoli ha a fumane thuto e sa sebelisoengamples. Ho khothaletsoa ho beha Min Delta Temp ka 15°F kapa phapang e kholoanyane.
2. Tlohela Nako Pakeng tsa Samples (Metsotsoana) seta ho ea kamehla kapa u e lokise ha ho hlokahala.
   HLOKOMELA: Hangata, Nako Pakeng tsa Samples (Metsotsoana) e ka sala e le ea kamehla (60 metsotsoana). U ka eketsa boleng haeba damper Stroke Time e telele ho feta ea yuniti e tloaelehileng, kapa haeba damper actuator e hloka nako e eketsehileng ho araba. U ka e fokotsa haeba ΔT e kholo e le teng mme nako sebakeng sa marang-rang e lekanyelitsoe. Leha ho le joalo, nako e nyane haholo lipakeng tsa samples e ka fella ka litekanyo tse sa nepahalang.
3. Bakeng sa Mokhoa oa ho Ithuta, khetha SEBELISA.
4. Tobetsa Boloka.
5. Emela hore Mokhoa oa ho Ithuta o phethe.
   ELA HLOKO: Ho bala kakaretso ea nako (ka metsotso) eo Mokhoa oa ho Ithuta o lokelang ho o nka ho qeta, atisa Nako Pakeng tsa S.amples (Metsotsoana) ka 91, ebe o arola ka 60.

Ho nolofaletsa Mokhoa oa ho Ithuta ho Qala Otho

Haeba Learn Ready e tlaleha hore HA E READY ka lebaka la lithempereichara tse sa thabiseng hona joale, u ka nolofalletsa AFMS hore e iketsetse Mokhoa oa ho Ithuta ha e lemoha mocheso o nepahetseng hamorao (ho ka etsahala ka bosiu bo le bong).

1. Tlohela Min Delta Temp e behiloe ho ea kamehla kapa u e fetole ha ho hlokahala.
   ELA HLOKO: Haeba ΔT e fetoha ka tlase ho Min Delta Temp, molaoli oa AFMS o tla tlosa Mokhoa oa ho Ithuta. Sena ke ho etsa bonnete ba hore molaoli ha a fumane thuto e sa sebelisoengamples. Ho khothaletsoa ho beha Min Delta Temp ka 15°F kapa phapang e kholoanyane.
2. Tlohela Auto Start Delta Temp e setetsoe ho ea kamehla, kapa e lokise ha ho hlokahala.
   HLOKOMELA: Ha ΔT e fihla Auto Start Delta Temp, Mokhoa oa ho Ithuta o tla qala. Mokhoa oa ho Ithuta o tla phetheha haeba ΔT e lula e le kholo ho feta Min Delta Temp ka nako eohle. Auto Start Delta Temp e bonyane 20°F ho feta Min Delta Temp e khothalelitsoeng.
3. Tlohela Nako Pakeng tsa Samples (Metsotsoana) seta ho ea kamehla kapa u e lokise ha ho hlokahala.
   HLOKOMELA: Hangata, Nako Pakeng tsa Samples (Metsotsoana) e ka sala e le ea kamehla (60 metsotsoana). U ka eketsa boleng haeba damper Stroke Time e telele ho feta ea yuniti e tloaelehileng, kapa haeba damper actuator e hloka nako e eketsehileng ho araba.
4. Bakeng sa ho Ithuta ka Boiketsetso Noble, khetha ON.
5. Tobetsa Boloka.
6. Emela hore Mokhoa oa ho Ithuta o phethe nakong ea mocheso o loketseng (ho ka etsahala bosiu bo le bong).

Netefatsa hore Boemo ba AFMS bo Mokgweng wa ho Ithuta
Tlas'a Kopo > AFMS > Monitor, sehlopheng sa Ts'ebetso, netefatsa hore na
Boemo ba AFMS bo tlaleha LEARN MODE.

 

Netefatsa Mokhoa oa ho Ithuta o Phethiloe le Letsatsi la ho Rekota
Kamora hore AFMS e phethe Mokhoa oa ho Ithuta (hoo e ka bang lihora tse 2), tlasa Kopo > AFMS > Ithute:
1. Fumana Letsatsi la ho Qetela ho Ithuta (YYMMDD).
2. Kenya letsatsi ho Note Sheets bakeng sa Checkout ea AFMS le Komisi.
Tlolela ho Fumana Lethathamo la AFMS le ho Rekota Lintlha leqepheng la 12.

Mokhoa o Mong oa ho Matha Mokhoa oa ho Ithuta
Leha e sa nepahale, dampLintlha tsa sebopeho li ka baloa le ho kenngoa ka letsoho Lethathamong la AFMS. Sena se lokela ho etsoa feela haeba - ka nako e behiloeng bakeng sa ho theha AFMS - ΔT e ke ke ea lula e le kholo ho feta Min Delta Temp bakeng sa nako ea Mokhoa oa ho Ithuta.

Ho etsa lipalo, sebelisa lipalo tsa %OA/%RA tse fumanoang ho ASHRAE Standard 111, karolo ea 7.6.3.3, “Flow Rate Approximation by Temperature Ratio”.

1. Eya ho Tshebediso > AFMS > Hlophisa.
2. Bakeng sa Damper Setpoint, kenya ea pele damper position (E kwetswe, ke hore 0) e fumanwang ho Tafole ya AFMS (ho thepo ya Tune).
   HLOKOMELA: Ela hloko: Nako e 'ngoe le e 'ngoe e latelang ka ts'ebetso ena, kenya e latelang
   dampboemo bo tsoang tafoleng: 5, 10, 15, 20, 30, 40, 50, 60, 70, 80, 90, 100.
3. Tobetsa Boloka.
4. Eya ho Monitor tab.
5. Lumella Outside Air Temp, Return Air Temp, le Mixed Air Temp hore e tsitse.
6. Ho ipapisitse le ts'ebeliso, bala Karolo ea OA kapa Karolo ea RA, u sebelisa lipalo tsa mocheso le %OA kapa %RA equation ho tsoa ho maemo.
7. Eya ho tab ya Tune.
8. Kenya sephetho kholumong ea OA Fraction / RA Fraction kholomo (ho ipapisitse le ts'ebeliso).
   ELA HLOKO: Bakeng sa lits'ebetso tsa Pressure Assist, kenya hape Phallo ea Moea oa Supply ho bala kholomong ea SA Flow le OAD Diff. Khatello / RAD Diff.
   Khatello ea ho bala ka har'a Diff. Kholomo ea khatello.
9. Kgetha Boloka.

Pheta mehato eo bakeng sa 12 e setsengampmaemo a thathamisitsoeng Lethathamong la AFMS.

Fumana Lethathamo la AFMS 'me u rekote Data
Tlas'a Tshebediso > AFMS > Beakanya, sehlopheng sa Tafole sa AFMS:

1. Fumana lintlha tsa Characterized Airflow Performance™, tse fumanehang ho:
• Kholomo ea OA Fraction (bakeng sa moea o tloaelehileng le o kantle damplisebelisoa tsa thuso ea khatello ea maikutlo)
• Kholomo ea RA Fraction (bakeng sa moea o khutlang damplikopo tsa thuso ea khatello feela)
• Kholomo ea SA Flow (bakeng sa mefuta e 'meli ea lisebelisoa tsa khatello ea khatello feela)
• Phapang. Kholomo ea khatello (bakeng sa mefuta e 'meli ea lits'ebetso tsa thuso ea khatello feela)

2. Rekota lintlha ka har'a Note Sheets bakeng sa Checkout le Khomishene ea AFMS:
• Bakeng sa lits'ebetso tse tloaelehileng, sebelisa Lethathamo la AFMS Post.
• Bakeng sa likopo tsa thuso ea khatello, sebelisa Tafole ea AFMS PA Post.

Beha Mokhoa oa Taolo
Tlas'a Ts'ebeliso> AFMS> Hlophisa, sehlopheng sa Setupo sa Tsamaiso:
1. Bakeng sa Mokhoa oa Taolo, khetha ho tsoa ho menu e theohang khetho e tla ba mokhoa o tloaelehileng oa AFMS bakeng sa ho kenya sena:
• OA FLOW CTRL: AFMS e hlophisa damper actuator ho boloka Sebaka sa Kantle sa Phallo ea Moea (CFM).
• FETA: AFMS e fetisa taolo ea damper actuator ho molaoli e mong. (Mehato ea AFMS le e beha leihlo feela.)
• MAT CTRL: AFMS e hlophisa damper actuator ho boloka Mixed Air Temp Setpoint (°F/°C).
2. Tobetsa Boloka.

 

MABAPI LE HO LEKOLA LE HO LE BALANCE AFMS

Haeba ntho e 'ngoe le e' ngoe e kentsoe 'me e lokisoa ka nepo pele e sebelisa Mokhoa oa ho Ithuta, data ea Tafole ea AFMS e tšepahala haholo. AFMS e sebelisa mokhoa o tšoanang ho tloha ho ASHRAE Standard 111 (Karolo ea 7.6.3.3, "Flow Rate Approximation by Temperature Ratio") oo motho ea lekang hantle le ea leka-lekanang a lokelang ho o sebelisa. Ho feta moo, ha AFMS e etsa mokhoa ona, e nka litekanyo tsa OAT, RAT, le MAT ka nako e le 'ngoe le ka makhetlo a' maloa bakeng sa litekanyetso tse ka tšeptjoang, ho eketsa ho tšepahala ha data.

Leha ho le joalo, haeba netefatso e hlokahala, litataiso tse latelang li lokela ho bolokoa:
• Etsa litekanyo u sebelisa lisebelisoa tse ka latelloang tsa NIST.
• Sebelisa mokhoa o tsoang ho ASHRAE Standard 111, Karolo ea 7.6.3.3, “Flow Rate
Kakaretso ka Temperature Ratio” ho bala lintlha tsa tafole.
• Haeba ho hlokahala tokiso, lokisa lintlha tse le 'ngoe ho tsoa ho AFMS
Tafole ho ena le ho etsa tokiso ya mola.

ELA HLOKO: TAB OA Factor (e fumanoang sehlopheng sa Calibration tlas'a Tune) e lokela ho ba ho 1 'me e se ke ea fetoloa.

Haeba liphetoho tse kholo li lokela ho etsoa ho data ea Tafole ea AFMS, e 'ngoe kapa tse ling tsa li-sensor li ka' na tsa kenngoa ka tsela e fosahetseng le / kapa boemo bo ne bo sa lokisoa pele ho ho sebetsa Mokhoa oa ho Ithuta. Bothata bo lokela ho lokisoa ka ho lokisa ho kenya le/kapa ho hlophisoa, ebe o sebelisa Mokhoa oa ho Ithuta hape.

 

SETS'OA SETS'OANE

Fesetere ea Sesebelisoa e supa molaoli e le sesebelisoa sa BACnet mme e seta lisebelisoa tsa puisano tsa BACnet. Fesetere ea Sesebelisoa e boetse e hlophisa molaoli oa Local Area Network (LAN). Aterese e ncha ea IP, Subnet Mask, le Default Gateway boleng li fanoe ke molaoli oa tsamaiso ea lefapha la IT la moaho.

ELA HLOKO: Ka mor'a hore liphetoho tse ka fensetere li bolokehe, molaoli o tla sebelisa
litlhophiso tse ncha 'me e tla hloka hore u kene atereseng e ncha. Haeba e
molaoli ha a ho subnet e tšoanang le router gateway network, eona
e ke ke ea sebetsa hantle.

Fesetere ea Sesebelisoa e bonts'a liparamente tse ngata (tse fapaneng ho latela hore na IP kapa Ethernet e khethiloe):

• Lebitso la Sesebediswa—Lebitso le tlameha ho ikgetha hara disebediswa tsohle tse inthaneteng ya BACnet.
• Tlhaloso-Boitsebiso ba boikhethelo bo sa kenyelletsoeng lebitsong la sesebelisoa.
• Sebaka—Boleng ba boikhethelo bo hlalosang sebaka sa sebele sa molaoli.
• Device Instance-Nomoro e khethollang molaoli mosebetsing oa inthanete.
  Mohlala oa sesebelisoa o tlameha ho ikhetha mosebetsing oa Marang-rang le ho tloha ho 0–4,194,302. Mohlala oa sesebelisoa o abeloa ke moqapi oa sistimi ea BACnet. Mohlala oa kamehla oa sesebelisoa ke 1 mme o tlameha ho fetoleloa ho nomoro e ikhethileng ho qoba likhohlano le lisebelisoa tse ling.
• Nomoro ea APDU e Leka hape—E bontša palo e phahameng ea ho leka hape eo APDU (Application Layer Data Unit) e fetisetsoang hape.
• Nako ea Nako ea APDU—E bontša nako (ka milliseconds) lipakeng tsa phetiso ea APDU e hlokang tumello eo ho seng kananelo e amohetsoeng.
• APDU Seg. Nako ea Nako—Thepa ea Segment Timeout e bontša nako (ka milliseconds) lipakeng tsa phetiso ea karolo ea APDU.
• Backup Failure Timeout-Nako (ka metsotsoana) eo molaoli a lokelang ho e emela pele a emisa mokhoa oa ho boloka kapa oa tsosolosa. Sebelisa KMC Connect, TotalControl, kapa Converge ho boloka molaoli.
• Aterese ea IP - Aterese ea marang-rang ea kahare kapa ea lekunutu ea molaoli. (Ho fumana aterese e lahlehileng, sheba Ho Fumana Aterese ea IP e sa Tsejoeng leqepheng la 19.
• MAC - Aterese ea MAC ea molaoli.
• Subnet Mask—The Subnet Mask ke eona e etsang qeto ea hore na ke karolo efe ea aterese ea IP e sebelisoang bakeng sa sekhetho sa marang-rang le hore na ke karolo efe e sebelisetsoang sekhetho sa sesebelisoa. Mask e tlameha ho ts'oana le mask bakeng sa router gateway network le lisebelisoa tse ling ho subnet.
• Default Gateway-Aterese ea router gateway network. Molaoli le router ea heke e tlameha ho ba karolo ea subnet e tšoanang ea LAN.
• Boema-kepe ba UDP-UDP (Mosebelisi Datagram Protocol) ke mokhoa o mong oa likhokahano ho ea ho TCP o sebelisoang haholo-holo ho theha likhokahano tsa "khokahano e se nang khokahano" lipakeng tsa lits'ebetso inthaneteng.
  Boema-kepe ke "virtual channel" eo data e fetisoang le ho amoheloa ka eona.
• Qala hape Sesebediswa-E qala selaolo hape. Sena se tšoana le ho qala molaoli bocha ka BACnet e batang e qalang ho tsoa ho KMC Connect kapa TotalControl. Ho qala bocha ha ho fetole thepa kapa ho boloka liphetoho tse so bolokoang.

 

TS'IRELETSO SEFESE

Fesetere ea Ts'ireletso e beha phihlello ea mosebelisi ho molaoli:

• Nakong ea tlhophiso, li-default tsa admin/admin li lokela ho fetoloa ho matlafatsa ts'ireletso.
• Lethathamo la mabitso a mosebelisi le tlameha ho kenyelletsa bonyane lebitso le le leng le nang le litokelo tsa Motsamaisi.
• Mabitso a basebelisi le li-password ha li na taba.
  Selaoli se na le mekhahlelo e mengata ea phihlello ea basebelisi:
• A View Ke basebelisi feela ba ka view maqephe a tlhophiso empa a sa etse liphetoho.
• Opereishene e ka etsa liphetoho tsa tlhophiso empa ha e khone ho fetola litlhophiso tsa ts'ireletso.
• Mookameli a ka etsa liphetoho tsa tlhophiso le ts'ireletso.
• Mosebelisi oa phihlello ea Tloaelo o na le mekhoa e kopaneng ea phihlello joalo ka ha a khethiloe ke Motsamaisi.

Karolo ea NetSensor Passwords e fana ka viewho kenya le khetho ea ho fetola li-password tse hlokahalang ho fihlella molaoli o sebelisa letoto la Conquest STE-9000 NetSensor kapa sesebelisoa sa mohala sa KMC Connect Lite. Diphasewete tsena ke dinomoro tse nne, mme nomoro ka nngwe e le 0 ho isa ho 9. Haeba dinomoro tse nne kaofela ke 0, ha ho na password e hlokehang ho mosebedisi boemong boo. Bakeng sa tlhaiso-leseling e batsi, bona Conquest Controllers Default Password Technical Bulletin kamora ho kena ho Litaolo tsa KMC. web sebaka.

 

FIRMWARE HLAHALA FESE

Firmware ea molaoli oa AFMS e ka ntlafatsoa ka ho web sebatli ka mor'a ho khoasolla firmware ea morao-rao ho tsoa ho KMC Controls. Ho khoasolla ho tsoa ho Litaolo tsa KMC le ho kenya firmware file khomphuteng:

1. Kena ho Litaolo tsa KMC web saete ebe u khoasolla firmware ea morao-rao e zip file ho tsoa leqepheng lefe kapa lefe la sehlahisoa sa molaoli oa AFMS.
2. Fumana le ho ntša "Over-The-Network" (eseng "HTO-1105_Kit") EXE file bakeng sa molaoli ea amehang oa mohlala (o tlamehang ho ba mofuta oa "BAC-xxxxCE-AFMS" oa firmware).
3. Sebelisa BAC-xxxxCE-AFMS_x.xxx_OverTheNetwork.exe file.
4. Tobetsa E ho lumella Windows ho kenya lenaneo.
5. Tobetsa OK lebokoseng la puisano la License la Firmware.
6. Tobetsa Unzip lebokoseng la puisano la WinZip Self-Extractor.

Ho kenya firmware ho tsoa khomphuteng ho ea ho molaoli:

1. Kena ho molaoli oa web leqephe. Sheba Fesetere ea ho Kena leqepheng la 3.
2. Fensetereng ea Firmware ea molaoli, tobetsa Khetha File, fumana zip e ncha ea firmware file (e lokela ho ba foldareng e nyane ea C:\ProgramData\KMC Controls\Firmware Upgrade Manager\BACnet Family), ebe o tobetsa Open.
3. Ka mor'a ho botsoa hore na u batla ho tsoela pele ka ho kopitsa, tobetsa OK 'me firmware e ncha e qala ho kenya ho molaoli.
ELA HLOKO: Ho hlakola ntlafatso le ho siea lisebelisoa ka firmware ea mantlha e ntse e le teng, tobetsa konopo Hlakola kapa Tlosa.
4. Ka mor'a hore firmware e ncha e kenngoe, u tla botsoa hore na u batla ho itlama ho jarolla. Ho phethela ntlafatso, tobetsa OK.
5. Ho kenya phetoho ea firmware ho sebetsa, molaoli o tla hloka ho qalisoa bocha. Ha u botsoa hore na u batla ho qala sesebelisoa hape, tobetsa OK.
6. Ka mor'a hore molaoli a qale hape, o tla hloka ho kena hape ho tsoela pele ka tlhophiso leha e le efe e eketsehileng. Sheba Fensetere ea ho Kena leqepheng la 3.

 

THUSO LEFESE

Eya ho KMC e o isa ho batho ba KMC Controls web sebaka. Sebelisa patlo ho fumana leqephe la sehlahisoa sa molaoli oa AFMS. Sheba tse fapa-fapaneng files tse ka kopitsoang. O tla hloka khokahano e sebetsang ea Marang-rang hore sehokelo se sebetse.

HLOKOMELA: Li-Bulletin le firmware li fumaneha feela ka mor'a ho kena ho web sebaka.

 

HO HLAHALA Aterese ea IP e sa tsejoeng

Haeba aterese ea marang-rang ea molaoli e lahlehile kapa e sa tsejoe, molaoli o tla arabela atereseng ea kamehla ea IP hoo e ka bang metsotsoana ea pele ea 20 ka mor'a hore matla a sebelisoe.

 

Ho fumana aterese ea IP e sa tsejoeng:

1. Hakolla molaoli ho LAN ebe o hokela molaoli joalo ka ha ho hlalositsoe Fensetereng ea Keno leqepheng la 3.
2. K'homphieutheng, bula fensetere ea sebatli 'me u kenye aterese ea kamehla ea 192.168.1.251.
3. Kopanya molaoli hape mohloling oa matla 'me hang-hang u leke ho hokahana le sebatli. Sebatli se tla arabela ka aterese ea IP ea molaoli le subnet mask.
4. Hang ha aterese e tsejoa, hokela molaoli ho subnet e amehang ea IP bakeng sa ts'ebetso e tloaelehileng kapa tlhophiso ea molaoli.
   ELA HLOKO: Aterese ea IP ea molaoli e ka boela ea bonoa ho KMC Connect, TotalControl, le KMC Converge ha molaoli a hokahane hantle le marang-rang.

 

FETOHA Aterese ea komporo ea hau

Selelekela
Ho hokahanya k'homphieutha ka ho toba ho molaoli, o tlameha ho beha nakoana aterese ea IP ea k'homphieutha hore e lumellane le aterese ea IP ea molaoli. Aterese ea IP ea komporo e ka fetoloa ka ho sebelisa lisebelisoa kapa ka letsoho.

Fetola Aterese ea IP ea Khomphutha ka Utility
Mokhoa o bonolo ka ho fetisisa bakeng sa basebelisi ba tla fetola aterese ea bona ea IP ka makhetlo a mangata ke ho kenya aterese ea IP e fetolang ts'ebeliso (e kang Simple IP Config e fumanehang ho tloha GitHub). Sheba litaelo ka software.

Ho software:

1. Boloka rekoto/setting ea tlhahisoleseling ea aterese ea komporo ea hau.
2. Kenya tse latelang bakeng sa aterese e ncha ea nakoana ea IP ea komporo, Subnet mask, le Gateway:
   • IP address—192.168.1.x (moo x e leng nomoro e pakeng tsa 1 le 250)
   • Subnet mask—255.255.255.0
   • Gateway—Tloha o se na letho kapa o sa fetoha (kapa haeba seo se sa sebetse, sebelisa 192.168.1.***, moo linomoro tsa ho qetela li fapaneng le aterese ea IP komporong kapa molaoli).
   TLHOKOMELISO: Kamora hore tokiso ea molaoli e felile, khutlisetsa komporo ea hau ho li-setting tsa mantlha tsa IP.

Fetola Aterese ea IP ea Khomphutha ka Bowena
Selelekela
Ho fetola aterese ea IP ea komporo ea hau ka letsoho, latela litaelo (kapa tse lekanang le lisebelisoa tsa hau le sistimi ea ts'ebetso) bakeng sa Windows 10 (Litlhophiso) leqepheng la 21 kapa Windows 7 (Paneli ea Taolo) leqepheng la 22.

HLOKOMELA: Lits'oants'o li tla shebahala li fapane liphetolelong tse fapaneng tsa Microsoft Windows.
TLHOKOMELISO: Ho ipapisitsoe le komporo le mofuta oa Windows, lebitso le nepahetseng la khokahano ho molaoli e kanna ea ba Ethernet, Local Area Connection, kapa ntho e tšoanang.

TLHOKOMELISO: Haeba Fumana aterese ea IP e khethiloe ka bo eona, aterese ea IP le Subnet mask ea komporo ha li bontšoe. Li ka bonoa, leha ho le joalo, ka ho sebelisa ipconfig ho tsoa ho taelo ea taelo. Ho matha ipconfig, thaepa cmd ka lebokoseng la Batla, ho Command Prompt App tobetsa Enter, thaepa ipconfig ka potlako, ebe o tobetsa Enter.
9. Rekota litlhophiso tse teng tsa puisano ea Thepa.
10. Khetha Sebelisa aterese e latelang ea IP ebe u kenya tse latelang bakeng sa aterese ea IP, Subnet mask, le Gateway.
• IP address—192.168.1.x (moo x e leng nomoro e pakeng tsa 2 le 255)
• Subnet mask—255.255.255.0
• Gateway—Tloha e se na letho kapa e sa fetoha (kapa haeba seo se sa sebetse, sebelisa
192.168.1.***, moo linomoro tsa ho qetela li fapaneng le aterese ea IP komporong kapa molaoli).
11. Ha tlhahisoleseding yohle e nepahetse, tobetsa OK le OK.
ELA HLOKO: Liphetoho li lokela ho sebetsa ka botlalo kamora metsotsoana e seng mekae.

Windows 7 (Panele ea Taolo)
1. Tobetsa konopo ea Qala ebe u khetha Control Panel.
2. Ho tswa ho Control Panel:
• (Neng viewed by icons) tobetsa Network and Sharing Center.
• (Neng viewed by category) tobetsa Network le Internet ebe joale Network and Sharing Center.

 

 

3. Tobetsa khokahano ea lehae bakeng sa LAN. Ho ipapisitse le komporo le mofuta oa Windows, lebitso le tobileng la khokahano e kanna ea ba Ethernet, Local Area Connection, kapa ntho e tšoanang.
4. Moqoqong oa Khokahano ea Sebaka sa Lehae (kapa tse tšoanang) tsa Boemo, tobetsa Properties.
5. Ebe u tobetsa Internet Protocol Version 4 (TCP/IPv4) ebe u tobetsa Properties.
ELA HLOKO: Haeba Fumana aterese ea IP e khethiloe ka bo eona, aterese ea IP le subnet mask ea komporo ha li bontšoe. Li ka bonoa, leha ho le joalo, ka ho sebelisa ipconfig ho tsoa ho taelo ea taelo. Ho matha ipconfig, tobetsa konopo ea Qala, thaepa cmd ka lebokoseng la Batla, tobetsa Enter, thaepa ipconfig ka potlako, ebe o tobetsa Enter.
6. Rekota litlhophiso tse teng tsa puisano ea Thepa.
7. Bukeng ea Properties, khetha Sebelisa aterese e latelang ea IP ebe u kenya tse latelang bakeng sa aterese ea IP, Subnet mask, le Gateway.
• IP address—192.168.1.x (moo x e leng nomoro e pakeng tsa 1 le 250)
• Subnet mask—255.255.255.0
• Gateway—Tloha o se na letho kapa o sa fetoha (kapa haeba seo se sa sebetse, sebelisa 192.168.1.***, moo linomoro tsa ho qetela li fapaneng le aterese ea IP komporong kapa molaoli)
8. Ha tlhahisoleseding eohle e nepahetse, tobetsa OK 'me Koala.
ELA HLOKO: Liphetoho li lokela ho sebetsa ka botlalo kamora metsotsoana e seng mekae.
TLHOKOMELISO: Kamora hore tlhophiso ea molaoli e felile, pheta ts'ebetso ena u sebelisa litlhophiso tsa mantlha tsa IP.

 

HO BATLE PHOSO

• Etsa bonnete ba hore thapo ea khokahanyo ea Ethernet e hoketsoe boema-kepeng ba Ethernet eseng boema-kepe ba Room Sensor.
• Sheba marang-rang le likhokahano.
• Qala hape molaoli. Sheba karolo ea Resetting Controllers ho KMC Conquest Controller Application Guide.
• Review Aterese ea IP le lintlha tsa ho kena. Sheba Selelekela leqepheng la 3, Fensetere ea Kena leqepheng la 3, le Ho Fetola Aterese ea Khomphuta ea Hao leqepheng la 20.
• Sheba karolo ea Communication Issues—Ethernet ho KMC Conquest Controller Application Guide.

 

TS'OOA TS'OANELO
Bakeng sa lisensara tsa dijithale le tsa elektroniki, li-thermostats le li-controller, nka mehato e loketseng ho thibela ho tsoa ha motlakase ho lisebelisoa ha u li kenya, u li sebeletsa kapa u li sebelisa. Hlakola motlakase o sa fetoheng o bokelletsoeng ka ho thetsa letsoho la motho nthong e theiloeng fatše pele o sebetsa ka sesebelisoa ka seng.

 

BOHLOKOA TSEBISO

KMC Controls® le NetSensor® kaofela ke matshwao a kgwebo a ngodisitsweng a KMC Controls. KMC Conquest™, KMC Connect™, KMC Converge™, le TotalControl™ kaofela ke matshwao a kgwebo a KMC Controls. Lihlahisoa tse ling kaofela kapa mabitso a mabitso a boletsoeng ke matšoao a lik'hamphani kapa mekhatlo ea bona.

Litaba tse tokomaneng ena ke tsa merero ea tlhahisoleseling feela. Litaba le sehlahisoa seo e se hlalosang li ka fetoha ntle le tsebiso.

KMC Controls, Inc. ha e fane ka boemedi kapa ditiisetso mabapi le tokomane ena. Le ka mohla KMC Controls, Inc. e ke ke ya jara boikarabelo ba tshenyeho efe kapa efe, ka kotloloho kapa ka tsietsi, e hlahang kapa e amanang le tshebediso ya tokomane ena.

Letšoao la KMC ke lets'oao la khoebo le ngolisitsoeng la KMC Controls, Inc. Litokelo tsohle li sirelelitsoe.
Sesebelisoa sa KMC Connect Lite™ bakeng sa tlhophiso ea NFC e sirelelitsoe tlasa United
States Patent Patent 10,006,654.
Pat. https://www.kmccontrols.com/patents/

TS'ESO
Lisebelisoa tse ling bakeng sa ho kenya, ho hlophisa, ts'ebeliso, ts'ebetso, mananeo, ntlafatso le tse ling tse ngata li fumaneha ho KMC Controls. web sebaka (www.kmccontrols.com). Viewtsohle li fumaneha files e hloka ho kena sebakeng sa marang-rang.

© 2024 KMC Controls, Inc.

Litlhaloso le moralo li ka fetoha ntle le tsebiso

 

Bala haholoanyane ka Bukana ena & Khoasolla PDF:

Litokomane / Lisebelisoa

KMC E LAOLANG 5901 AFMS Ethernet [pdf] Bukana ea Mosebelisi 5901, 5901 AFMS Ethernet, AFMS Ethernet, Ethernet

Litšupiso

• Bukana ea Mosebelisi