Keychron Q1 Version 2 Keyboard User Guide
Q1 Customizable KEYBOARD MANAKO YA MOSEBETSI
Fully Assembled Version
Keyboard
- 1x Keyboard e Kopantsoeng ka Botlalo
Ho kenyeletsa
- 1x Aluminium Case (ANSI)
- 1x PCB (ANSI)
- 1x Plate ea tšepe
- 1x Foam e Monyang Molumo
- 1x Foam ea nyeoe
- 16x Gaskets (8 e kentsoe le 8 ka Lebokoseng)
- Li-sete tse 4 x Li-stabilizer
- 1 sete x Li-keycaps
- Liphetoho tse 1 x (Gateron G Pro)
Cable
- 1x Type-C ho ea ho Type-C Cable
- 1x Type-A ho ea ho Type-C Adapter
Lisebelisoa
- 1x Switch Puller
- 1x Keycap Puller
- 1x Screwdriver
- 1x Senotlolo sa Hex
Barebone Version
Keyboard Kit
- 1x Keyboard Kit (Ntle le Li-keycaps & Switches)
Ho kenyeletsa
- 1x Nyeoe ea Aluminium
- 1x PCB
- 1x Plate ea tšepe
- 1x Foam e Monyang Molumo
- 1x Foam ea nyeoe
- 12x Gaskets (8 e kentsoe le 4 ka Lebokoseng)
- Li-sete tse 4 x Li-stabilizer
Cable
- 1x Type-C ho ea ho Type-C Cable
- 1x Type-A ho ea ho Type-C Adapter
Lisebelisoa
- 1x Switch Puller
- 1x Keycap Puller
- 1x Screwdriver
- 1x Senotlolo sa Hex
PHAKANG MOTSAMAI
Haeba u mosebelisi oa Windows, ka kopo fumana li-keycaps tse loketseng lebokoseng, ebe u latela litaelo tse ka tlase ho fumana le ho kenya li-keycaps tse latelang.
1. Fetolela ho The Right System
Ka kopo etsa bonnete ba hore sistimi e hukung e kaholimo ho le letšehali e fetoletsoe ho sistimi e ts'oanang le sistimi e sebetsang ea komporo ea hau.
2. Thepa ea VIA Key Remapping Software
Ka kopo etela caniusevia.com ho khoasolla software ea morao-rao ea VIA ho lokisa linotlolo.
Haeba software ea VIA e sa tsebe keyboard ea hau, ka kopo ikopanye le tšehetso ea rona ho fumana litaelo
3. Likarolo
Ho na le mekhahlelo e mene ea li-setting tsa bohlokoa keyboard. Lera O le lera 1 ke tsa tsamaiso ea Mac. Lera 2 le 3 ke tsa sistimi ea Windows.
Haeba sesebelisoa sa hau sa ho fetolela se fetisetsoa ho Mac, joale lera la O le tla kengoa tšebetsong.
Haeba sistimi ea hau ea toggle e fetisetsoa ho Windows, ebe layer 2 e tla kengoa tšebetsong. Hopola hore haeba u e sebelisa ka mokhoa oa Windows, ka kopo etsa liphetoho ho lera 2 ho e-na le lera le ka holimo ( lera O ).
Ena ke phoso e tloaelehileng eo batho ba e etsang.
4. The Backlight
5. Fetola Khanya ea Backlight
6. Tiisetso
Khiboto e entsoe ka mokhoa o ikhethileng ebile ho bonolo ho e aha bocha.
Haeba ho na le letho le sa tsamaeeng hantle ka karolo efe kapa efe ea keyboard ea keyboard nakong ea waranti, re tla nkela likarolo tse sa sebetseng tsa keyboard, eseng keyboard kaofela.
7. Shebella Thuto ea Kaho Holima Rōna Websebaka
Haeba u ntse u haha keyboard ka lekhetlo la pele, re khothaletsa haholo hore u shebelle video ea thuto ea moaho ho rona websaete pele, ebe u qala ho iketsetsa keyboard.
8. Hlahisa Fektheri bocha
Ho batle phoso? Ha u tsebe ho etsahalang ka keyboard?
1. Leka ho seta fektheri ka ho tobetsa fn + J +Z (bakeng sa metsotsoana e 4)
2. Khoasolla firmware e nepahetseng bakeng sa keyboard ea hau ho tsoa ho rona websebaka.
Tlosa thapo ea motlakase ho keyboard.
3. Tlosa sebaka bareng keycap ho fumana ba bang kaofela konopo ho PCB.
4. Tšoara konopo ea ho seta botjha ha o ntse o hokela thapo ya motlakase ebe o lokolla senotlolo sa ho seta botjha. Keyboard hona joale e tla kenya mokhoa oa DFU.
5. Hlahisa firmware ka QMK Toolbox.
6. Fektheri seta keyboard botjha hape ka ho tobetsa fn + J + Z (bakeng sa metsotsoana e 4)
* Tataiso ea mohato ka mohato e ka fumanoa ho rona websebaka
Qt LITLHAKISO TSA KEYBOARD TSE KA IKETLANG
| Litlhaloso | |
| Sebopeho | 75% |
| Fetola mofuta | Mechini |
| Bophara | 145 limilimithara |
| Bolelele | 327.5 limilimithara |
| Bophahamo bo ka pele | 21.6 mm (ntle le li-keycaps) |
| Bophahamo ba morao | 34.8 mm (ntle le li-keycaps) |
| Bophahamo bo ka pele | 32.2 limilimithara (e kentse likonopo tsa OEM) |
| Bophahamo ba morao | 44.2 limilimithara (e kentse likonopo tsa OEM) |
| Bolelele ba maoto a keyboard | 2.4 limilimithara |
| Lenaka | 5.2 degree |
Q1 MACHONIK KEYBOARD HO FETAVIEW
TLALEHO EA SEHLOOHO EA TŠEBELETSO:
LERA 0: Lera lena le tla kengoa tšebetsong ha toggle ea keyboard ea hau e fetisetsoa ho Mac.
LERA 1: Lera lena le tla kengoa tšebetsong ha sistimi ea keyboard ea hau e fetoleloa ho Mac ebe o tobetsa konopo ea fn/M0(1).
LERA 2: Lera lena le tla kengoa tšebetsong ha sistimi ea keyboard ea hau e fetoleloa ho Windows.
LERA 3: Lera lena le tla kengoa tšebetsong ha sistimi ea keyboard ea hau e fetoleloa ho Windows ebe o tobetsa konopo ea fn/M0(3).
TLHALOSO SEHLOHO
| Tlhaloso ea Bohlokoa | Tlhaloso ea Bohlokoa | ||
| Ser- | Khanya ea skrine e fokotseha | RGBMd+ | Mokhoa oa RGB E latelang |
| Ser+ | Ho Khanya ha Screen Ho Eketseha | RGBMd- | Mokhoa oa RGB o fetileng |
| Khanya- | Backlight Fokotsa | Hue+ | Hue Eketseha |
| E khanyang+ | Backlight Eketsa | Hue- | Hue Fokotsa |
| Prvs | E fetileng | RGB SPI | Keketseho ea lebelo la RGB |
| Bapala | Bapala/Emisa | RGB SPD | Ho fokotsa lebelo la RGB |
| E 'ngoe | E 'ngoe | EA-0-M1 | Lera 1 le tla kengoa tšebetsong ha u tšoere senotlolo sena |
| Semumu | Semumu | EA-0-M3 | Lera 3 le tla kengoa tšebetsong ha u tšoere senotlolo sena |
| Vol- | Ho Fokotsa Molumo | LWINO | Mosebetsi oa KC_TABView |
| Phatlalatso+ | Keketseho ea Molumo | LWINO | KC_E File Mofuputsi |
| RGBToggle | Bulela/ tima lebone la Backlight | ||
Lisebelisoa tsa ho kenya batho ba bang ha li tsamaisane le keyboard.
Ka lebaka la ho lumellana, liphetolelo, mefuta le bakhanni ba Windows/macOS, ts'ebetso ea lisebelisoa tsa ho kenya motho oa boraro e ka ameha ha u ntse u sebelisa keyboard. Ka kopo etsa bonnete ba hore sistimi ea hau ea ts'ebetso le li-driver li nakong.
Likonopo tse ling tsa fn kapa linotlolo tsa multimedia ha li sebetse tlas'a Windows/ Android mode.
Ts'ebetso ea linotlolo tse ling tsa multimedia e kanna ea emisoa ka lebaka la tšebelisano, mefuta, mefuta le likhanni tsa Windows/Android OS.
Tlhokomelo ea Tšireletseho:
Boloka sehlahisoa, lisebelisoa le likarolo tsa ho paka moo bana ba ka fihlang ho tsona ho thibela likotsi le likotsi tsa ho bipetsa.
Kamehla u boloke sehlahisoa se omme ho qoba ho bola.
Se ke oa beha sehlahisoa mochesong o feteletseng o ka tlase ho -10°C (5°F) kapa ka holimo ho 50°C (131 °F} ho boloka nako ea bophelo ea keyboard.
Lethathamo la lintlha tsa Keychron, Inc.
Dover, DE 19901, United States
Re fumane ho:
https://www.keychron.com
Support@keychron.com
II @keychron
@) @keychron
-@keychronMK
E entsoe ke Keychron
E entsoe chaena
Keychron Q1 Keycap Size
Ka tlase ke setšoantšo sa hi res sa boholo ba keycap ea Q1.
Q1 Keyboard Plate File
Mokhoa oa ho etsa fektheri bocha Keychron Q1
Ho batle phoso? Kapa ha u tsebe se etsahalang ka keyboard? Feme e qala hape Keychron Q1 ea hau.
1. Khoasolla firmware ea Q1 (the file e hloka ho notlolloa) ebe u khoasolla QMK Toolbox. (Haeba sehokelo sa ho jarolla se ka tlase se sa sebetse, sebelisa sehokelo sena: https://github.com/qmk/qmk_toolbox/releases)
Keychron Q1
Keychron Q1 Version 2
Keychron Q1 Japane JIS Version
QMK Toolbox
2. Ntša thapo ea motlakase ho keyboard.
3. Bula QMK Toolbox.
4. Tlosa sebaka bareng keycap ho fumana konopo reset ka lehlakoreng le letšehali la sebaka bareng switjha ho PCB.
5. Tobetsa fatše 'me u tšoare konopo ea reset, ebe u kenya thapo ea motlakase. Khiboto e tla kena ka mokhoa oa DFU. Ebe, QMK Toolbox e tla hlahisa ka mantsoe a mosehla "***DFU sesebediswa se hoketswe".
6. Tobetsa bula 'me u khethe firmware ea Keychron Q1 e nepahetseng. Bakeng sa mofuta oa Q1 Non Knob, ka kopo khetha atmega32u4 bakeng sa MCU (Ha ho hlokahale hore u khethe letho bakeng sa MCU haeba u na le Q1 Knob Version) ebe u tobetsa konopo ea Flash. E tla qala ho benya. (Tlhokomeliso: Se ke oa ntša thapo ea motlakase ho keyboard ea hau ha e ntse e benya.)
7.Emela metsotsoana e seng mekae 'me ha u bona litaba tse ka tlase, ho bolela hore keyboard e khantšitse ka katleho ho tsosolosa fektheri.
Haeba VIA e sa khone ho tsamaisana le Keychron Q1 ea hau kamora hore u leke ho benya, o hloka ho latela mehato ena:
1. Hokela hape thapo ea motlakase ea keyboard.
2. Haeba VIA e ntse e sa kopane hammoho ka mor'a hore o hokele thapo ea motlakase hape, khoasolla Keychron Q1 JSON. file
Keychron Q1
Keychron Q1 Version 2
3. Nkolla keyboard ea hau komporong ea hau.
4. Bula VIA
Mohato oa 1: Tobetsa karolo ea "DESIGN".
Mohato oa 2: Hula JSON file ho tab ebe o tobetsa karolo ea "CONFIGURE" ho etsa 'mapa oa bohlokoa.
6. Replug keyboard ya hao hape.
7. VIA e lokela ho kopana hammoho le Keychron Q1 hona joale.
U ka ikopanya le support@keychron.com haeba sekoli se koahetsoeng ke waranti se hlaha sehlahisoa sa hau nakong ea waranti. Keychron e tla hlompha waranti ea keyboard ea rona ea Q le V (mohlala: Q1, Q2, V1, V2, joalo-joalo) ka e 'ngoe ea mekhoa e latelang ho ea ka maikutlo a rona:
- Litšitiso tsa li-keyboards tsa Q le V li bakiloe ke tlhahiso: Re tla nkela feela likarolo tse sa sebetseng tsa keyboard, eseng keyboard kaofela, kaha e ka etsoa habonolo ebile ho bonolo ho e aha bocha.
- Litšitiso tsa li-keyboards tsa Q le V li bakiloe ke ho harola sehlahisoa sa rona, ho kenya ts'ebetso e sa lokelang, ho lokisoa / liphetoho tse seng tsa feme, phetoho e fosahetseng ea sehlahisoa, kapa ho se tsotelle, ho kenyelletsa empa ho sa felle feela ho "chesa", le ts'ebeliso e mpe e ts'oanang. : HA RE TLA fana ka litšebeletso tsa mahala. Re fana feela ka ts'ebeletso e lefelloang ho khutlisa likarolo tse sa sebetseng ka litšenyehelo tsa hau (ho kenyeletsoa le litšenyehelo tsa likarolo, litefiso tsa ho tsamaisa thepa le lekhetho haeba ho hlokahala).
Lethathamo la Metsoako ea Bohlokoa Ea Keychron Q1
Bakeng sa Keychron Q1, re kenyelelitse linotlolo tsohle tse tloaelehileng le tse sebetsang tse ka fihlellehang ka ho kopanya linotlolo tsa kamehla. Mona ke tafole bakeng sa metsoako eohle ea bohlokoa le mesebetsi eo e ka e fihlelang.
fn + Linotlolo
| Linotlolo | Mosebetsi |
|---|---|
| fn + F1 | Khanya ea Screen Down (mokhoa oa Windows) |
| fn + F2 | Khanya ea skrine (mokhoa oa Windows) |
| fn + F3 | Mosebetsi View (Mokhoa oa Windows) |
| fn + F4 | File Explorer (mokhoa oa Windows) |
| fn + F5 | Keyboard Backlight Down (mokhoa oa Windows) |
| fn + F6 | Keyboard Backlight Up (Mokhoa oa Windows) |
| fn + F7 | Khutlisetsa morao (mokhoa oa Windows) |
| fn + F8 | Bapala / Emisa (mokhoa oa Windows) |
| fn + F9 | Fast Forward (Mokhoa oa Windows) |
| fn + F10 | Molumo: Ho khutsisa Molumo (Mokhoa oa Windows) |
| fn + F11 | Molumo: Volume Down (mokhoa oa Windows) |
| fn + F12 | Molumo: Phahamiso ea Phahamiso (mokhoa oa Windows) |
| fn + tab | Bulela / Tlosa lebone le ka morao |
| fn + Q | Mokhoa oa RGB E latelang |
| fn + A | Mokhoa oa RGB o fetileng |
| fn + W | Keyboard Backlight Up |
| fn + S | Keyboard Backlight Down |
| fn + E | Hue Eketseha |
| fn + D | Hue Fokotsa |
| fn + R | Keketseho ea Saturation |
| fn + F | Ho fokotseha ha Saturation |
| fn + T | Keketseho ea lebelo la RGB |
| fn + G | Ho fokotsa lebelo la RGB |
| fn + F1 | F1 (Mokhoa oa Mac) |
| fn + F2 | F2 (Mokhoa oa Mac) |
| fn + F3 | F3 (Mokhoa oa Mac) |
| fn + F4 | F4 (Mokhoa oa Mac) |
| fn + F5 | F5 (Mokhoa oa Mac) |
| fn + F6 | F6 (Mokhoa oa Mac) |
| fn + F7 | F7 (Mokhoa oa Mac) |
| fn + F8 | F8 (Mokhoa oa Mac) |
| fn + F9 | F9 (Mokhoa oa Mac) |
| fn + F10 | F10 (Mokhoa oa Mac) |
| fn + F11 | F11 (Mokhoa oa Mac) |
| fn + F12 | F12 (Mokhoa oa Mac) |
| fn + J + Z (tobetsa nako e telele bakeng sa 3s) | Seta Keyboard botjha |
*Kaholimo ho na le likhokahano tsa mantlha tsa Keychron Q1. U ka etsa khetho ea hau ea linotlolo ho e 'ngoe le e 'ngoe lera le ho fihlella mesebetsi e meng ka VIA software. Ka kopo, tobetsa Mona 'me u bale "Kamoo U ka Sebelisang Li-Layers tse Fapaneng ho Beha Linotlolo tsa Motsoako" bakeng sa lintlha.
Bala Haholoanyane ka….
Keychron Q1 Version 2 Keyboard
Khoasolla
Keychron Q1 Version 2 Keyboard User Guide – [ Khoasolla PDF ]
