Litlhaloso
- Phepelo ea motlakase: AC voltage
- Mamello ea voltage phepelo: N/A
- Taolo ea leseli: Phetoho e se nang mohato ho tloha ho 0 ho isa ho 100% ea matla a felletseng
- Tšebelisano le mojaro: Mabone a tloaelehileng a incandescent
- Bokhoni ba ho kenya: N/A
- Sebaka sa taolo: N/A
- Setsi sa taolo: Potentiometer e nang le switch
- Nomoro ea khokahano clamps: N/A
- Karolo e ka thōko ea lithapo tsa khokahanyo: N/A
- Ho lokisoa ha casing: N/A
- Sebaka sa ho sebetsa ka mocheso: N/A
- Mamella voltage: N/A
- Sehlopha sa polokeho: N/A
- surge voltagsehlopha sa e: N/A
- Boemo ba tšilafalo: N/A
- Boholo bo nang le foreimi ea kantle: N/A
- Lenane la tshireletso: N/A
SEBELISA TAELO
MOLAOLI OA LEBAKA LA ELECTRONIC KA PUSH LE KOTANE EA ROTARY
- Litšobotsi tsa selaoli sa lehalima sa elektroniki se nang le konopo ea push le rotary
- Selaoli sa mabone a elektroniki se nang le konopo ea ho sutumetsa le ea rotary (dimmer switch) se thusa ho fetola matla a khanya ho tloha ho 0 ho isa ho 100% ea matla a felletseng a khanya 'me e ka sebelisoa hoo e batlang e le foreimi e' ngoe le e 'ngoe. Ka tšebeliso ea motlakase e lekanang le boemo ba lehalima e eketsa boiketlo le poloko ea letsatsi le letsatsi ea motlakase.
Selaoli sa lehalima se sebelisoa ho laola boemo ba khanya ea lehalima le tloaelehileng la incandescent. Ho laola ho kenyelletsa tšebeliso ea potentiometer e nang le switch. Tlhophiso e nolofalletsa taolo e bohlale ea litsamaiso tsa mabone 'me e bonolo ebile e na le chelete e ngata ha e sebelisoa. Mookameli o na le tšireletso e feteletseng le e khutšoanyane ea potoloho.
Lintlha tsa tekheniki
| Letšoao | FRO-1 |
| Phepelo ea motlakase | 230V 50Hz |
| Mamello ea voltage phepelo | -15 ÷ +10% |
| Taolo ea khanya | switjha le taolo ho potentiometer (10÷100%) |
| Tšebelisano le mojaro | convectional incandescent, halogen 230V, tlaase voltage halogen 12V (e nang le e tloaelehileng le ea toroidal
transformer) |
| Boima ba moroalo | 40÷400W |
| Sebaka sa taolo | 5÷40oC |
| Sehlopha sa taolo | teko |
| Nomoro ea khokahano clamps | 3 |
| Karohano ea lithapo tsa khokahanyo | boholo 1,5 limilimithara2 |
| Ho lokisa casing | lebokoso la lebota le tloaelehileng la flash-mounted Ř 60mm |
| Sebaka sa ho sebetsa ka mocheso | ho tloha -20oC ho ea ho +45oC |
| Mamella voltage | 2KV (PN-EN 60669-1) |
| Sehlopha sa polokeho | II |
| surge voltagsehlopha | II |
| Boemo ba tšilafalo | 2 |
| Boemo bo nang le foreimi e kantle | 90,1×81,1×55 |
| Tšireletso index | IP20 |
Lipehelo tsa tiisetso
Tiisetso e fanoa bakeng sa nako ea likhoeli tse leshome le metso e 'meli ho tloha ka letsatsi la theko. Selaoli se nang le bothata se tlameha ho isoa ho moetsi kapa ho morekisi ka tokomane ea theko. Tiisetso ha e koahele phapanyetsano ea fuse, tšenyo ea mochini, tšenyo e hlahisitsoeng ke ho itokisa kapa tšebeliso e fosahetseng. Nako ea tiisetso e tla atolosoa ka nako ea tokiso.
KOPANO
Ho kenya
- Tlosa li-fuse tse ka sehloohong tsa ho kenya lapeng.
- Sheba hore na ho na le terata ea mohato e tlisoang ka lebokoseng la ho kenya.
- Khau konopo ea taolo ka tšebeliso ea screwdriver 'me ue tlose.
- Sututsa likotoana maboteng a lehlakoreng la adaptara e kantle ka screwdriver e bataletseng ebe u e tlosa.
- Kopanya terata ea mohato ho clamp ya mojaro o laoloang.
- Kopanya terata e 'ngoe ho clamp ka motsu*. (*Ha ho e-na le tsamaiso ea li-circuit tse peli, kopanya terata ea boraro le ea bone ho clamp ka motsu.)
- Kopanya mojule oa dimmer ka lebokoseng la ho kenya ka likhechana tse tsitsitseng kapa li-screws tse tlamang tse fanoeng le lebokose.
- Kopano ea foreimi e kantle.
- Kopanya dimmer le konopo ea ho laola.
- Kenya ts'ebetsong li-fuse tse ka sehloohong tsa ho kenya ntlo le ho etsa liteko tse sebetsang hantle.Wyłączyć bezpieczniki sieciowe instalacji domowej.
Sekema sa khokahano ea motlakase sa molaoli oa lehalima oa elektroniki ka konopo ea push le rotary
Hlokomela!
Seboka se tla tšoaroa ke motho ea nang le litsebo tse nepahetseng ea nang le voltage mme e tla fihlella maemo a naha a polokeho.
Ho kopanya balaoli ba babeli tsamaisong ea litsela tse peli ho ka senya balaoli.
Litaelo tsa ho kenya mochini oa taolo ea lebone la elektroniki ka liforeimi tse ngata
- Ntlha ea pele, kenya mochine oa ho laola lebone la elektronike ka lebokoseng le ntseng le eketseha. Mechine e meng e haufi e kentsoe e le hore "maeba"(1) (haeba a le teng) a kopane le poleiti e bohareng ea molaoli (2).
- Sebaka se pakeng tsa foreimi e bohareng ea dimmer le lihlahisoa tse haufi e lokela ho ba hoo e ka bang 1 mm.
LBH
P: Nako ea tiisetso bakeng sa molaoli oa lehalima ke eng?
A: Tiisetso e fanoe ka nako ea likhoeli tse leshome le metso e 'meli ho tloha letsatsing la theko. Selaoli se nang le bothata se tlameha ho isoa ho moetsi kapa ho morekisi ka tokomane ea theko. Tiisetso ha e koahele phapanyetsano ea fuse, tšenyo ea mochini, tšenyo e hlahisitsoeng ke ho itokisa kapa tšebeliso e fosahetseng. Nako ea tiisetso e tla atolosoa ka nako ea tokiso.
Karlik Elektrotechnik Sp. z hle. Wrzesinska 29 | 62-330 Nekla I tel. +48 61 437 34 00 1 e-lengolo-tsoibila: karlik@karlik.pk | www.karlik.pl
Litokomane / Lisebelisoa
 |
Karlik FRO-1 Electronic Lighting Controller Ka Push Rotary Button [pdf] Bukana ea Mosebelisi FRO-1 Electronic Lightning Controller With Push Rotary Button, FRO-1, Electronic Lighting Controller With Push Rotary Button, Lighting Controller With Push Rotary Button, Push Rotary Button, Push Rotary Button, Rotary Button, |
