ISOLED 114664 Sys-Pro Push Input Radio Output for Switch or Dimmer Receiver Manual

Likaroloana

• Etsa kopo ho molaoli o le mong oa LED RF kapa mokhanni oa RF dimming.
• Hokela le push switch ho fihlela ts'ebetso ea ho tima/e tima le ho fifala ha 0-100%.
• Adopt thekenoloji ya waelese ya 2.4GHz, sebaka se hole ho fihla ho 30m.
• Sebaka se seng le se seng se ka tsamaisana le moamoheli a le mong kapa ho feta.
• CR2032 konopo ea betri e tsamaisoang.
  

Tekheniki Parameters

Kenyeletso le Sephetho

• Letšoao la tlhahiso: RF 2() .4GHz
• Sebetsa voltage: 3VDC CR2032 ( )
• Mosebetsi oa hona joale: ＜ 5mA
• Boemo ba hona joale: ＜2μA
• Nako ea ho ema: 2 lilemo
• Sebaka sa hole: 30m(Sebaka se senang mekoallo)

Tšireletseho le EMC

• Tekanyetso ea EMC (EMC): EN301 489, EN 62479
• Tekanyetso ea polokeho(LVD): EN60950
• Thepa ea Radio(RED): EA-300-TZ
• Setifikeiti: CE,EMC,LVD,RED

Tiisetso

• Tiisetso: 5 lilemo

Tikoloho

• Thempereichara ea ts'ebetso: Ta: -30 OC ~ +55 OC
• Lintlha tsa IP: IP20

Boemo

Ho kenya Battery

Setšoantšo sa wiring

Ts'ebetso ea Push switch:

1. Tobetsa nako e kgutshwane: Bulela/tima lebone.
2. Tobetsa nako e telele (1-6s): Ha lebone le butswe, eketsa kapa fokotsa kganya o sa kgaotse.

Match Remote Control (mekhoa e 'meli ea papali)

Mosebelisi oa ho qetela a ka khetha mekhoa e loketseng ea papali / hlakola. Ho na le likhetho tse peli bakeng sa khetho:

Sebelisa konopo ea Match ea molaoli

Papali:
Tobetsa konopo e khuts'oane ea papali, hang-hang tobetsa konopo ea push.
Letšoao la LED le khanyang ka makhetlo a 'maloa le bolela hore papali e atlehile.

Hlakola:
Tobetsa 'me u tšoare konopo ea match bakeng sa li-5s ho hlakola litebelisoa tsohle, Letšoao la LED le bonesa ka potlako makhetlo a 'maloa le bolela hore liremote tsohle tse tsamaellanang li hlakotsoe.

Sebelisa Power Restart

Papali:
Tima motlakase, ebe o kenya motlakase hape, ebe o pheta ts'ebetso hape. Ka mor'a ts'ebetso ea bobeli ea ON/OFF hang-hang tobetsa konopo ea ho tima/ho tima (remoutu ea sebaka se le seng) konopo ea zone (remoutu ea libaka tse ngata) makhetlo a 3 ho remoutu. Leseli le panya ka makhetlo a 3 ho bolela hore papali e atlehile.

Hlakola:.
Tima motlakase, ebe o kenya motlakase hape, hang-hang tobetsa konopo ea push makhetlo a 5. Leseli le panya ka makhetlo a 5 ho bolela hore li-remote tsohle tse tšoanang li hlakotsoe.

Lintlha tsa polokeho

1. Bala litaelo tsohle ka hloko pele u qala ho kenya.
2. Ha u kenya betri, ela hloko polarity e ntle le e ntle ea betri. Nako e telele ntle le remote control, tlosa betri. Ha sebaka se hole se ntse se fokola 'me se sa utloe letho, khutlisetsa betri.
3. Haeba ho se karabo ho tsoa ho moamoheli, ka kopo amahanya remote hape.
4. Bakeng sa sebaka se ka hare le se omileng sebelisa feela.

 

 

Litokomane / Lisebelisoa

ISOLED 114664 Sys-Pro Push Input Radio Output bakeng sa Switch kapa Dimmer Receiver [pdf] Bukana ea Mosebelisi 114664, Sys-Pro, Push Input Radio Output bakeng sa Switch or Dimmer Receiver, Sys-Pro Push Input Radio Output bakeng sa Switch or Dimmer Receiver, 114664 Sys-Pro Push Input Radio Output for Switch or Dimmer Receiver, 114664 Push Radio Sysput Sephetho, Sys-Pro Push Input Radio Output

Litšupiso

• Bukana ea Mosebelisi