iNSTYLE LED RC-WIFI-RGB-5 WiFi le RF 5 In 1 LED Controller
Selelekela
WiFi & RF 5 ho 1 LED Controller
Mohlala No.: RC-WIFI-RGB-5
Tuya APP taolo ea leru / Taolo ea lentsoe / 5 Channels / 1-5 mmala /DC 1 2-48V / Four PWM frequency /Push Dim.
Likaroloana
- 5 in ) tshebetso, e sebelisetsoang ho laola RGB, RGBW, RGB + CCT, mocheso oa 'mala kapa lesela le le leng la LED.
- DC l 2-48V kenyeletso, 5 channel kamehla voltagtlhahiso.
- Taolo ea leru ea Tuya APP, ts'ehetso ea ho tima / ho tima, 'mala oa RGB, mocheso oa' mala le khanya e fetoha, ho lieha ho tima / ho tima mabone, ho tsamaisa nako, ho hlophisa liketsahalo le mosebetsi oa ho bapala 'mino.
- Taolo ea lentsoe, tšehetsa amazon ECHO le Tmall Genie sebui se bohlale.
- Bapisa le RF 2.4G remote control boikhethelo.
- Mosebelisi o hloka ho beha mofuta oa leseli ka konopo ea tobetsa pele ho khokahano ea marang-rang ea Tuya APP mme o bapise RF e hole ea mofuta o tšoanang oa leseli.
- Molaoli e mong le e mong oa V5-L(WT) a ka boela a sebetsa e le sesebelisoa sa WiFi-RF, ebe o sebelisa Tuya APP ho laola selaoli se le seng kapa ho feta sa RF LED kapa mokhanni oa dimming oa RF LED ka ho lumellana.
- PWM maqhubu 500Hz, 2000Hz, 8000Hz kapa l 6000Hz khethang ho tsona.
- Khanya / tima nako ea ho fifala 3s e ka khethoang.
- Hokahana le sesebelisoa sa ho sutumetsa kantle ho fihlela ts'ebetso ea ho tima / ho tima le 0 -100% ts'ebetso ea dimming.
Tekheniki Parameters
Kenyeletso le Sephetho
- Keletso voltage 1 2-48VDC
- Kenya hona joale 30.5A
- Sephetho voltage 5 x ( 12-48)VDC
- Sephetho sa hajoale 6A/CH @ 1 2/24V 4A/CH @ 36/ 48V
- Mofuta oa tlhahiso Kamehla voltage
Ho fokotsa data
- Lets'oao la ho kenya Tuya APP+ RF 2.4GHz + Push-DIM
- Bohole ba ho laola 30m (Sebaka se senang mekoallo)
- Sekala se boputsoa se fifalang 4096 ( 2 /\ 1 2) maemo
- Lebala la dimming 0-100%
- Lekhalo le nyenyefatsang Logarithmic
- Maqhubu a PWM 2000Hz (ka ho sa feleng)
Tšireletseho le EMC
- EMC e tloaelehileng (EMC) ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3 .2.4
- Tekanyetso ea polokeho(LVD) EN 62368-1 :2020+A 11 :2020
- Thepa ea Radio/RED) ETSI EN 300 328 V2.2.2
- Setifikeiti CE,EMC,LVD,RED
Tikoloho
- Mocheso oa ts'ebetso Tamocheso: -30°C ~ +55°C
- Thempereichara ea boholo (Boholo.) Tc: +85°C
- Lintlha tsa IP IP20
Tiisetso le Tshireletso
- Tiisetso 5 lilemo
- Tshireletso Reverse polarity Over-heat Short circuit
Mechanical Structures And Installation
Sistimi Wiring
Khokahano ea mehala
Khokahano e se nang mohala
Hlokomela:
- Sebaka se ka holimo se lekantsoe tikolohong e pharaletseng (ha ho tšitiso),
Ka kopo, sheba sebaka sa 'nete sa tlhahlobo pele u kenya. - Ka kopo, sheba hore na marang-rang a router ea WiFi a le sehlopheng sa 2.4G, sehlopha sa 5G ha se fumanehe, 'me u se ke ua pata marang-rang a router ea hau.
- Ka kopo, boloka sebaka se pakeng tsa lisebelisoa tsa V5-L(WT) le router haufi, 'me u hlahlobe matšoao a WiFi.
Setšoantšo sa Wiring
- Bakeng sa RGB+CCT
- Bakeng sa RGBW
- Bakeng sa RGB
- Bakeng sa mebala e 'meli ea CCT
- Bakeng sa 'mala o le mong
Tobetsa 'me u tšoare konopo ea MATCH bakeng sa 15s, ho fihlela letšoao la RUN LED le soeufala, ebe le lokolla, molaoli e tla ba mofuta oa DIM, nako ea ho tima / ea ho tima le eona e khutlisetsa ho 0.5s, maqhubu a PWM a tsoa a khutlisetsa ho 2000Hz.
Hlokomela:
- Kamora ho fetola mofuta oa leseli ka sesebelisoa sa DIP, ka kopo etsa ts'ebetso ea tuya APP hape.
- Bakeng sa mofuta oa khanya oa RGB+CCT kapa CCT, matla a tsoelang pele a ho tima le ho tima a tla fetola mocheso oa mebala oa 3 (WW, NW le CW) ka tatellano.
- Tima motlakase, ebe o bulela motlakase, pheta hape.
Hang-hang tobetsa konopo ea papali makhetlo a 3, lebone la ho tima/ho tima le tla fetoha pakeng tsa 3s le 0.5s.
Tuya APP Network Connection
Tobetsa 'me u tšoare konopo ea Match bakeng sa li-2, kapa u tobetse habeli Konopo ea Match pele:
Hlakola khokahano ea marang-rang e fetileng, kenya Smart config mode, lebone la pherese la LED le bonesa pele, tlhahiso ea LED e tla benya makhetlo a 10.
Tobetsa o hatelle Match key bakeng sa 5s:
Hlakola khokahano ea marang-rang e fetileng, kenya AP config mode, pherese LED indicator e benya butle.
Haeba tlhophiso e bohlale e sitiloe, ka kopo leka AP config.
Pheta matla a ho tima le ho tima makhetlo a 5 a latellanang, hape o hlakise khokahano ea marang-rang e fetileng, kenya Smart config mode, tlhahiso ea LED e tla benya makhetlo a 10.
Tuya App Interface
Sehokelo se sesoeu
Bakeng sa mofuta oa DIM:
Thetsa khanya ea slide ho bapatsa khanya feela .
Bakeng sa mofuta oa RGB:
Tšoara khanya ea slide, fumana RGB e tsoakiloeng e tšoeu pele, ebe u bapatsa khanya e tšoeu feela.
Bakeng sa mofuta oa RGBW:
Thetsa khanya ea slide, lokisa khanya e tšoeu ea kanale.
Mocheso oa mocheso oa mebala
Bakeng sa mofuta oa CCT:
Thetsa lebili la mebala ho fetola mocheso oa 'mala.
Thetsa khanya ea selaete ho lokisa khanya.
Bakeng sa mofuta oa RGB+CCT:
Thetsa lebili la mebala ho fetola mocheso oa 'mala, RGB e tla tima ka bo eona.
Thetsa khanya ea selaete ho lokisa khanya e tšoeu.
Sebopeho sa mebala
Bakeng sa mofuta oa RGB kapa RGBW:
Thetsa lebili la mebala ho bapatsa 'mala o sa fetoheng oa RGB.
Thetsa khanya ea slide ho bapatsa khanya ea 'mala feela.
Thetsa selaete sa saturation ho fetola boemo ba mebala, e leng gradient ho tloha 'mala oa hona joale ho ea ho o mosoeu(RGB e tsoakiloeng).
Bakeng sa mofuta oa RGB+CCT:
Tšoara lebili la mebala ho fetola 'mala oa RGB o sa fetoheng, WW / CW e tla tima ka bo eona.
Thetsa khanya ea slide ho fetola khanya ea mebala.
Thetsa selaete sa saturation ho lokisa boemo ba 'mala, e leng gradient ho tloha' mala oa hajoale ho ea ho o mosoeu (RGB e tsoakiloeng).
Scene interface
- Sebaka sa 1-4 ke 'mala o tsitsitseng bakeng sa mefuta eohle e khanyang. 'mala o ka hare oa setšoantšo sena o ka khona ho fetola.
- Sebaka sa 5-8 ke mokhoa o matla oa mofuta oa RGB, RGBW, RGB + CCT, joalo ka botala bo fifalang le ho nyamela, ho tlola RGB, tlole ea mebala e 6, mebala e 6 e boreleli.
Mmino, Nako, Kemiso
- Papali ea 'mino e ka sebelisa sebapali sa' mino se bohlale kapa microphone e le ho kenya lets'oao la 'mino.
- Senotlolo sa Timer se ka bulela kapa sa tima mabone nakong ea lihora tse 24 tse tlang.
- Senotlolo sa Schedule se ka eketsa li-timers tse ngata ho bulela kapa ho tima leseli ho latela linako tse fapaneng.
V5-L(WT) Match Taolo ea Remoutu (Ka boikhethelo)
Mosebelisi oa ho qetela a ka khetha mokhoa o loketseng oa ho bapisa / oa hlakola. Ho na le likhetho tse peli bakeng sa khetho:
Sebelisa konopo ea V5-L(WT)'s Match
Papali:
Tobetsa konopo e kopana ea V 5-L(WT), hang-hang tobetsa konopo ea ho bula/ tima (remoutu ea zone e le 'ngoe) kapa konopo ea zone (remoutu ea libaka tse ngata) ho remoutu.
Letšoao la LED le khanyang ka makhetlo a 'maloa le bolela hore papali e atlehile.
Hlakola:
Tobetsa o ts'oare senotlolo sa V 5-L(WT) bakeng sa 10s, Letšoao la LED le bonesa ka potlako makhetlo a 'maloa le bolela hore li-remoutu tsohle tse tsamaellanang li hlakotsoe.
Sebelisa Power Restart
Papali:
Tima matla a V5-L(WT), ebe o bulela matla, o phete hape.
Tobetsa hang hang konopo ea ho tima/ tima (remoutu ea zone e le 'ngoe) kapa konopo ea zone (remoutu ea libaka tse ngata) makhetlo a 3 ho remoutu.
Leseli le panya ka makhetlo a 3 ho bolela hore papali e atlehile.
Hlakola:
Tima matla a V5-L(WT), ebe o bulela matla, o phete hape.
Tobetsa hang hang konopo ea ho tima/ tima (remoutu ea zone e le 'ngoe) kapa konopo ea zone (remoutu ea libaka tse ngata) makhetlo a 5 ho remoutu.
Leseli le panya ka makhetlo a 5 ho bolela hore li-remoutu tsohle tse tsamaellanang li hlakotsoe.
V5-L(WT) e sebetsa e le sesebelisoa sa WiFi-RF ho tsamaisana le molaoli oa RF LED kapa mokhanni oa dimming
Mosebelisi oa ho qetela a ka khetha mekhoa e loketseng ea papali / hlakola. Ho na le likhetho tse peli tseo u ka khethang ho tsona:
Sebelisa konopo ea Match ea molaoli
Papali:
Tobetsa konopo e khuts'oane ea papali ea molaoli, tobetsa hang-hang konopo ea ho tima/ tima ho Tuya APP.
Letšoao la LED le khanyang ka makhetlo a 'maloa le bolela hore papali e atlehile.
Hlakola:
Tobetsa 'me u tšoare senotlolo sa papali bakeng sa 5s, Leseli la LED le bonesa ka makhetlo a 'maloa le bolela hore papali e hlakotsoe.
Sebelisa Power Restart
Papali:
Tima matla a molaoli, ebe o bulela motlakase, pheta hape.
Hang-hang tobetsa konopo ea ho tima/ tima makhetlo a 3 ho Tuya APP.
Leseli le panya ka makhetlo a 3 ho bolela hore papali e atlehile.
Hlakola:
Tima matla a molaoli, ebe o bulela motlakase, pheta hape.
Hang-hang tobetsa konopo ea ho tima/ho tima makhetlo a 5 ho Tuya APP.
Leseli le panya ka makhetlo a 5 ho bolela hore papali e hlakotsoe.
PWM Frequency Setting
Ha motlakase o tima, khetha sesebelisoa sa DIP pele, ebe o tobetsa ho tšoara konopo ea MATCH, 'me u matlafatse molaoli ka nako e le' ngoe, letšoao la RUN LED le tla benya 'mala o mosoeu ka makhetlo a mabeli ho bolela hore boemo ba maqhubu a PWM bo atlehile.
Re ka khetha maqhubu a mane a PWM: 500Hz, 2000Hz, 8000Hz kapa l 6000Hz.
Maqhubu a phahameng a PWM, a tla baka molumo o tlase oa hona joale, lerata le phahameng la matla, empa a loketse kh'amera (Ha ho li-flickers tsa video).
Sututsa Dim
| 'Mala o le mong | Tobetsa | BONAHALA/TSHA |
| Penya Habeli | Bulela 100% kapa 10% (lebone la bosiu) le ka tsela e fapaneng | |
| Tobetsa nako e telele(> 1s) ho tloha OFF | Ho fifala PHAHAMA/TLASE | |
| Tobetsa nako e telele(> 1s) ho tloha ho ON | Ho fifala PHAHAMA/TLASE | |
| Mebala e Mebeli | Tobetsa | BONAHALA/TSHA |
| Penya Habeli | Bulela 100% kapa 10% (lebone la bosiu) le ka tsela e fapaneng | |
| Tobetsa nako e telele(> 1s) ho tloha OFF | Thempereichara ea 'mala HO UP/TLASE (tima 'me u bule ho khutlisetsa dimming) | |
| Tobetsa nako e telele(> 1s) ho tloha ho ON | Ho fifala PHAHAMA/TLASE | |
| RGB | Tobetsa | BONAHALA/TSHA |
| Penya Habeli | Fetola ho tloha ho mokhoa oa mebala ho ea ho o mosoeu (RGB e tsoakiloeng) le ka tsela e fapaneng | |
| Tobetsa nako e telele(> 1s) ho tloha OFF | Haeba ka mokhoa oa mebala fetola lebelo la ho potoloha; Haeba e le moeeng o mosoeu e fifala UP/TLASE |
|
| Tobetsa nako e telele(> 1s) ho tloha ho ON | Haeba ka mokhoa oa mebala qala / emisa ho potoloha ha mebala; Haeba e le moeeng o mosoeu e fifala UP/TLASE | |
| RGBW | Tobetsa | BONAHALA/TSHA |
| Penya Habeli | Fetola lipakeng tsa mofuta oa mebala, mokhoa o mosoeu (sekanale sa W) le mofuta oa 'mala + W | |
| Tobetsa nako e telele(> 1s) ho tloha OFF | Haeba ka mokhoa oa mebala fetola lebelo la ho potoloha; Haeba e le mokhoeng o mosoeu kapa ka 'mala oa + W, W dimming UP/ DOW N |
|
| Tobetsa nako e telele(> 1s) ho tloha ho ON | Haeba ka mokhoa oa mebala qala / emisa ho potoloha ha mebala; Haeba e le mokhoeng o mosoeu kapa mokhoa oa 'mala + W, W dimming UP/TOWN |
|
| RGB + CCT | Tobetsa | BONAHALA/TSHA |
| Penya Habeli | Fetoha ho tloha ho mokhoa oa mebala ho ea ho mokhoa o mosoeu o ka sebelisoang le ka tsela e fapaneng | |
| Tobetsa nako e telele(> 1s) ho tloha OFF | Haeba ka mokhoa oa mebala fetola lebelo la ho potoloha; Haeba o sebelisa mocheso oa 'mala o mosoeu UP/DOWN (tima 'me u Bule hore u khutlisetse dimming) |
|
| Tobetsa nako e telele(> 1s) ho tloha ho ON | Haeba ka mokhoa oa mebala qala / emisa ho potoloha ha mebala; Haeba o le mocheng o mosoeu, o fifala UP/TLASE |
Ho potoloha ha mebala
Re ka khetha lebelo la 4 la ho potoloha:
1 0 flash/ s e bolela ho potoloha ha mebala ka metsotsoana e 6
5 flash/s e bolela ho potoloha ha mebala ka metsotsoana e 30
2 flash/ s e bolela ho potoloha ha mebala ka motsotso o le mong
1 flash/s e bolela ho potoloha ha mebala ka metsotso e 6
Lethathamo la Mokhoa o Matla
Bakeng sa RGB/RGBW:
| Che. | Lebitso | Che. | Lebitso |
| l | RGB e tlole | 6 | RGB e nyamela kahare le ho tsoa |
| 2 | RGB e bonolo | 7 | Bofubelu bo nyamela ka hare le ka ntle |
| 3 | 6 tlola ka mebala | 8 | Botala bo nyamela ka hare le ka ntle |
| 4 | 6 mmala o boreleli | 9 | Boputsoa bo fifala kahare le kantle |
| 5 | Bopherese bo bosehla ba cyan bo boreleli | 10 | Bosoeu bo fela ka hare le ka ntle |
Bakeng sa RGB+CCT:
| No. | Lebitso | Che. | Lebitso |
| l | RGB e tlole | 6 | RGB e nyamela kahare le ho tsoa |
| 2 | RGB e bonolo | 7 | Bofubelu bo nyamela ka hare le ka ntle |
| 3 | 6 tlola ka mebala | 8 | Botala bo nyamela ka hare le ka ntle |
| 4 | 6 mmala o boreleli | 9 | Blue fa de in and out |
| 5 | Mocheso oa 'mala o boreleli | 10 | White fad e in and out |
Litokomane / Lisebelisoa
 |
iNSTYLE LED RC-WIFI-RGB-5 WiFi le RF 5 In 1 LED Controller [pdf] Buka ea Taelo RC-WIFI-RGB-5, RC-WIFI-RGB-5 WiFi le RF 5 In 1 LED Controller, WiFi le RF 5 Ho 1 LED Controller, 5 Ho 1 LED Controller, LED Controller, Controller |