FREAKS le GEEKS T30 Wireless Nano Controller

Litlhaloso:

• Mohlala: T30
• Tšebelisano: Phetoho le PC
• Ho tjhaja Voltage: DC 5.0V
• Ho tjhaja Hona Jwale: Hoo e ka bang 50mA
• Boroko Bjale: Hoo e ka bang 10uA
• Bokhoni ba Betri: 800mAh
• Nako ea ho tjhaja: Hoo e ka bang lihora tse 2
• Boima ba 'mele: 180g

Sehlahisoa se Felletseview:
Wireless Nano Controller model T30 e etselitsoe ho sebelisoa le Phetoho le PC. E na le mesebetsi e fapaneng joalo ka maemo a Turbo, phetoho ea ho sisinyeha ha enjene, le bokhoni ba khokahano ea mehala.

Litaelo tsa Tšebeliso ea Sehlahisoa

Khokahano ea Mehala:

1. Numella Pro Controller Wired Communication ho Sisteme Litlhophiso > Balaoli le li-Sensors.
2. Hokela thapo ea USB ho molaoli le khomphutha.
3. Tobetsa konopo efe kapa efe ho theha khokahano. Ha thapo e ha e khaotsoe, molaoli o tla khutlela mokhoeng oa Bluetooth.

Litlhophiso tsa mosebetsi oa Turbo:

Ho kenya ts'ebetsong Turbo:

• Tšoara konopo ea Turbo ebe o tobetsa konopo e lakatsehang.
• Tlosa konopo ea Turbo.
• Ho tšoara konopo e fanoeng ho tla etsisa ho hatisa ka potlako.
• Tobetsa Turbo le konopo hape ho koala.

Ho fetola lebelo la Turbo:

1. Tobetsa Turbo + sutumetsa Stick ea Right Analog ho potoloha mabelo: makhetlo a 5 / motsotsoana - makhetlo a 12 / motsotsoana - makhetlo a 20 / motsotsoana.
2. Tobetsa Turbo + sutumelletsa Stick ea Right Analog fatše ho potoloha lebelo ka morao: makhetlo a 20 / motsotsoana - makhetlo a 12 / motsotsoana - 5 linako/motsotsoana.

Mosebetsi oa ho Vibration ea Enjene:
Selaoli se fana ka maemo a 4 a matla a ho sisinyeha bakeng sa ho feta boiphihlelo bo matla ba ho bapala. O ka fetola thothomelo ka bowena matla ka console. Maemo ke: 100% (ka ho sa feleng), 70%, 30%, 0%.

Ho tsosolosa Controller:
Haeba molaoli oa hau a sa khone ho hokahanya kapa ho araba ka nepo, e hlophise bocha ka \ho sebedisa sesebediswa se senyane ho tobetsa konopo ya reset. Sena se tla lebisa ho molaoli ho resync.

LBH:

P: Nka fetola joang matla a ho sisinyeha a molaoli?
A: Tobetsa Turbo + sutumelletsa The Left Analog Stick ho eketsa matla, ebe o tobetsa Turbo + sutumelletsa Left Analog Stick ho theosa ho fokotsa matla.

Sehlahisoa se Felletseview

Lihlahisoa tsa lihlahisoa

• Ho tjhaja Voltage: DC 5.0V
• Hona joale: Hoo e ka bang 50mA
• Boroko Bjale: Hoo e ka bang 10uA
• Bokhoni ba Betri: 800mAh
• Nako ea ho tjhaja: Hoo e ka bang lihora tse 2
• Boima ba 'mele: 180g
• Bohole ba Phetiso ea Bluetooth 5.0: <10m
• Vibration ea Hona Joale: <25mA
• Ho tjhaja Hona Jwale: Hoo e ka bang 450mA
• Nako ea Tšebeliso: Hoo e ka bang lihora tse 10
• Nako ea ho ema: 30 Matsatsi
• Boholo: 140 x 93.5 x 55.5 limilimithara

Litaelo tsa Likonopo

Papali ea papali e na le likonopo tse 19 tsa dijithale (HO HOLIMO, TLASE, HO LETELA, KA HO LE TELE, A, B, X, Y, L1, R1, L2, R2, L3, R3, -, +, TURBO, HOME, Screenshot) le li-joystick tse peli tsa analoge tsa 3D. .

Ho kopanya le ho kopanya

1. Ho kopanya le Switch Console:
   • Mohato oa 1: Bulela Switch console, u ee ho Litlhophiso tsa Sistimi> Mokhoa oa Sefofane> Khokahano ea Laola (Bluetooth)> Bulela.
   • Mohato oa 2: Kenya mokhoa oa ho tsamaisana oa Bluetooth ka ho khetha Controllers > Fetola Grip/Order. Consolese e tla batla balaoli ba tsamaeang ka bobeli.
   • Mohato oa 3: Tobetsa 'me u tšoare konopo ea "HOME" ho molaoli bakeng sa metsotsoana e 3/5. LED1, LED2, LED3, le LED4 li tla benya kapele. Ha e se e hokahantsoe, molaoli o tla thothomela.
2. Khokahano ea Mehala:
   • Mohato oa 1: Numella Puisano ea Wired ea Pro Controller ho Litlhophiso tsa Sistimi > Lilaoli le Li-sensors.
   • Mohato oa 2: Hokela thapo ea USB ho molaoli le khomphutha. Tobetsa konopo efe kapa efe ho theha khokahano. Ha thapo e khaotsoe, molaoli o tla khutlela mokhoeng oa Bluetooth.
3. Mokhoa oa PC (Windows):
   Koala selaoli 'me u se hokele ho PC ka thapo ea mofuta oa C ea USB. Windows e tla instola mokhanni ka bo eona. LED2 e tla khantša ha molaoli a hokahane. Lebitso la pontšo e tla ba "Xbox 360 Controller bakeng sa Windows."

TURBO Setlhophiso sa Mosebetsi

Ho kenya tshebetsong Turbo:

1. Tšoara konopo ea Turbo ebe o tobetsa konopo e lakatsehang. Tlosa konopo ea Turbo. Hona joale, ho tšoara konopo e fanoeng ho tla etsisa ho hatisa ka potlako. Tobetsa Turbo le konopo hape ho koala.
2. Mosebetsi oa Turbo o ka abeloa likonopo tse latelang: A, B, X, Y, L1, L2, R1, R2, L3, R3.

Ho Fetola Lebelo la Turbo:

1. Tobetsa Turbo + sutumetsa Stick ea Right Analog ho potoloha lebelo: makhetlo a 5 / motsotsoana - makhetlo a 12 / motsotsoana - makhetlo a 20 / motsotsoana.
2. Tobetsa Turbo + sutumelletsa Stick ea Right Analog fatše ho potoloha lebelo ka morao: makhetlo a 20 / motsotsoana - makhetlo a 12 / motsotsoana - makhetlo a 5 / motsotsoana.

Mosebetsi oa Vibration oa Motor

Maemo a 4 a matla a ho sisinyeha a u lumella ho fetola boiphihlelo ba shockwave bakeng sa papali ea video ea 'nete, u ka bulela motor vibrate ea controller ka console. Ho na le maemo a 4: 100% (ea kamehla), 70%, 30%, 0%.

Ho Lokisa Matla a Vibration:

• Tobetsa Turbo + sutumelletsa Left Analog Stick ho eketsa matla.
• Tobetsa Turbo + sutumelletsa The Left Analog Stick tlase ho fokotsa matla.

Ho tsosolosa Molaoli

Haeba molaoli oa hau a sa khone ho tsamaisana, ho araba, kapa ho benya ka mokhoa o sa tsitsang, e sete bocha u sebelisa sesebelisoa se senyenyane ho tobetsa konopo ea ho seta bocha. Sena se tla etsa hore molaoli a lumellane hape.

Sephutheloana se kenyeletsa

Boemo	Tlhaloso
Matla tima	• Tobetsa o hatelle konopo ya HOME metsotsoana e 5 ho fihlela matshwao a tima. • Haeba ho hokela hape ho hloleha kamora metsotsoana e 30, molaoli o tla tima. • Haeba e sa sebetse ka metsotso e 5, molaoli o tla kenya mokhoa oa ho robala.
Ho tjhaja	• Ha o tjhaja o ntse o tima, matshwao a LED a tla benya le ho tima hang ha o tjhajilwe ka botlalo. • Ha o tjhaja o ntse o hoketswe, LED e tla benya mme e nne e tiile ha e tjhajilwe ka botlalo.
Tlase betri Alamo	• Ha betri e le tlase, letšoao la LED le tla benya. LED e tla lula e tiile ha e se e tjhajitsoe ka botlalo.

Tlhokomeliso ea Polokeho

• Sebelisa feela thapo ea ho tjhaja e fanoeng ho tjhaja sehlahisoa sena.
• Haeba u utloa molumo o belaetsang, mosi, kapa monko o sa tloaelehang, khaotsa ho sebelisa sehlahisoa sena.
• Se ke oa pepesa sehlahisoa sena kapa beteri eo e nang le eona ho li-microwave, mocheso o phahameng, kapa mahlaseli a letsatsi.
• Se ke oa lumella sehlahisoa sena ho kopana le maro kapa ho se tšoara ka matsoho a metsi kapa a mafura. Haeba mokelikeli o kena ka hare, khaotsa ho sebelisa sehlahisoa sena
• Se ke oa beha sehlahiswa sena kapa betri eo e nang le yona ka matla a feteletseng.
• U se ke ua hula thapo kapa ua e koba ka bohale.
• Se ke oa ama sehlahisoa sena ha se ntse se tjhaja nakong ya sefefo sa seaduma.
• Boloka sehlahisoa sena le sephutheloana sa sona moo bana ba banyenyane ba ka se fihlelang. Lintho tsa ho paka li ka kenngoa. Thapo e ne e ka phuthela melaleng ea bana.
• Batho ba nang le likotsi kapa mathata a menoana, matsoho kapa matsoho ha baa lokela ho sebelisa ts'ebetso ea vibrate
• Se ke oa leka ho harola kapa ho lokisa sehlahisoa sena kapa sephutheloana sa betri.
• Haeba e 'ngoe e senyehile, khaotsa ho sebelisa sehlahisoa.
• Haeba sehlahisoa se le litšila, se hlakole ka lesela le bonolo, le omeletseng. Qoba ho sebelisa joala bo bobebe, benzene kapa joala.

Boitsebiso ba taolo

Ho lahloa ha libeteri tse sebelisitsoeng le litšila tsa motlakase le lisebelisoa tsa elektroniki

Letšoao lena le hlahang sehlahisoa, libeteri tsa sona, kapa sephutheloana sa sona le bontša hore sehlahisoa le libeteri tseo se nang le tsona ha lia lokela ho lahleloa le litšila tsa ntlo. Ke boikarabello ba hau ho li lahlela sebakeng se loketseng sa pokello bakeng sa ho sebelisoa hape ha libeteri le lisebelisoa tsa motlakase le tsa elektroniki. Pokello e arohaneng le ho e sebelisa hape e thusa ho baballa lisebelisoa tsa tlhaho le ho qoba litlamorao tse mpe bophelong ba batho le tikolohong ka lebaka la boteng ba lintho tse kotsi libetering le lisebelisoa tsa motlakase kapa tsa elektroniki, tse ka bakoang ke ho lahloa ho fosahetseng. Ho fumana lintlha tse ling mabapi le ho lahloa ha libetri le litšila tsa motlakase le tsa elektroniki, ikopanye le ba boholong sebakeng sa heno, tšebeletso ea ho bokella litšila lapeng, kapa lebenkele leo u rekileng sehlahisoa sena ho lona. Sehlahisoa sena se ka sebelisa libeteri tsa lithium, NiMH, kapa alkaline.

Phatlalatso ea ho lumellana

Phatlalatso e Nolofalitsoeng ea Tumellano ea European Union:
Trade Invaders e phatlalatsa hore sehlahisoa sena se lumellana le litlhoko tsa bohlokoa le lipehelo tse ling tsa Litaelo tsa EMC 2011/65/UE, 2014/53/UE, 2014/30/UE. Sengoloa se felletseng sa European Declaration of Conformity se fumaneha ho rona websebaka www.freaksadgeeks.fr

• Khampani: Bahlaseli ba Khoebo SAS
• Aterese: 28, Avenue Ricardo Mazza Saint-Thibéry, 34630
• Naha: Fora
• sav@trade-invaders.com.

Maqhubu a maqhubu a seea-le-moea a sebetsang a T30 le matla a phahameng a tsamaisanang le ona ke a latelang: 2.402 ho 2.480 GHz, MAXIMUM: <10dBm (EIRP).

Litokomane / Lisebelisoa

FREAKS le GEEKS T30 Wireless Nano Controller [pdf] Bukana ea Mosebelisi T30 Wireless Nano Controller, T30, Wireless Nano Controller, Nano Controller, Controller

Litšupiso

• Bukana ea Mosebelisi