ESPRESSIF ESP32-H2-DevKitM-1 Boto ea Nts'etsopele ea Boemo ba Kena
- Mohlala oa Sehlahisoa: ESP32-H2-DevKitM-1
- Ka holim'a board Module: ESP32-H2-MINI-1
- Flash: 4 MB
- Tlhaloso: 0 MB
- Antenna: PCB ka boto
- Hokela ESP32-H2-DevKitM-1 komporong ea hau u sebelisa thapo ea USB-A ho ea ho USB-C.
- Netefatsa hore boto e maemong a matle pele o e matlafatsa.
- Sheba likarolo tsa hardware bakeng sa tšenyo leha e le efe e bonahalang.
Ho seta Software le Ntlafatso ea Likopo
- Sheba mehato ea ho instola bukaneng ea mosebelisi bakeng sa ho theha tikoloho ea software.
- Beha kopo ea hau botong ho latela litaelo tse fanoeng.
- Qala ho etsa kopo ea hau u sebelisa ESP32-H2-DevKitM-1.
P: Ke etse'ng haeba ESP32-H2-DevKitM-1 eaka e sa sebetse?
K: Lekola mohloli oa matla le likhokahano ho netefatsa phepelo e nepahetseng ea matla. Haeba bothata bo ntse bo tsoela pele, sheba karolo ea ho rarolla mathata bukeng ea mosebelisi.
ESP32-H2-DevKitM-1
Tataiso ena ea basebelisi e tla u thusa ho qala ka ESP32-H2-DevKitM-1 hape e tla fana ka leseli le tebileng.
ESP32-H2-DevKitM-1 ke boto ea ntlafatso ea boemo ba ho kena e thehiloeng ho Bluetooth® Low Energy le IEEE 802.15.4 combo module ESP32-H2-MINI-1 kapa ESP32-H2-MINI-1U.
Boholo ba lithakhisa tsa I/O ho mojule oa ESP32-H2-MINI-1/1U li robiloe ho lihlooho tsa phini mahlakoreng ka bobeli a boto ena bakeng sa ho hokahana habonolo. Bahlahisi ba ka hokela li-peripherals ka lithapo tsa jumper kapa ba beha ESP32-H2-DevKitM-1 leboteng la bohobe.
Tokomane e na le likarolo tse latelang tse kholo:
- Ge ng Qala: Ho fetaview ea ESP32-H2-DevKitM-1 le litaelo tsa ho seta ha hardware/software ho qala.
- Hardware Reference: Lintlha tse felletseng mabapi le Hardware ea ESP32-H2-DevKitM-1.
- Lintlha tsa Tokiso ea Hardware: Nalane ea ntlafatso, litaba tse tsebahalang, le likhokahano tsa litataiso tsa basebelisi bakeng sa liphetolelo tse fetileng (haeba li teng) tsa ESP32-H2-DevKitM-1.
- Litokomane Tse Amanang: Lihokelo tsa litokomane tse amanang le.
Rea qala
Ea bobeli e fana ka kenyelletso e khuts'oane ea ESP32-H2-DevKitM-1, litaelo tsa mokhoa oa ho etsa setup ea hardware ea ka hare, le mokhoa oa ho kenya firmware ho eona.
Tlhaloso ea Likarolo
Tlhaloso ea likarolo e qala ho tloha mojuleng oa ESP32-H2-MINI-1/1U ka lehlakoreng la l ebe o tsamaea ka nako.
| Karolo ea Bohlokoa | Tlhaloso |
| ESP32-H2-MINI-1 or ESP32-H2-MINI-1U | ESP32-H2-MINI-1/1U, e nang le ESP32-H2 ka hare ho eona ke |
| Pina Lihlooho | Lithakhisa tsohle tse teng tsa GPIO (ntle le bese ea SPI bakeng sa lifofu |
| 3.3 V Matla a LED | E bulela ha matla a USB a hoketsoe ho bo |
| Karolo ea Bohlokoa | Tlhaloso |
| 5 V ho 3.3 V LDO | Taolo ea matla e fetolang phepelo ea 5 V hore e be 3.3 |
| USB-to-UART Bridge | Sesebelisoa sa borokho se le seng sa USB-UART se fana ka litefiso tsa phetisetso |
| ESP32-H2 USB Type-C Port | Boema-kepe ba USB Type-C ho ESP32-H2 chip complia |
| Konopo ea Boot | Konopo ea ho jarolla. Ho tshoara fatshe Bootsa ebe o tobetsa |
| Seta Botjha Konopo | Tobetsa konopo ena ho qala sistimi bocha. |
| USB Type-C ho ea ho UART Port | Phepelo ea motlakase bakeng sa boto hammoho le sechaba |
| RGB LED | RGB LED e nang le aterese, e tsamaisoang ke GPIO8. |
| J5 | E sebedisetswa ho metha ha jwale. Sheba lintlha ho Karolo |
Qala Ntlafatso ea Kopo
Pele o matlafatsa ESP32-H2-DevKitM-1 ea hau, ka kopo etsa bonnete ba hore e maemong a matle ha ho na matšoao a hlakileng a tšenyo.
Hlokahala Hardware
- ESP32-H2-DevKitM-1
- thapo ea USB-A ho ea ho USB-C (Mofuta oa C).
- Khomphutha e sebelisang Windows, Linux, kapa macOS
Hlokomela
Lithapo tse ling tsa USB li ka sebelisoa feela ho tjhaja, eseng phetiso ea data le mananeo. Ka kopo, khetha ka nepo.
Setup ea Software
Ka kopo tsoela pele ho Qala, moo Sec on Installa on Step by Step e tla u thusa ka potlako ho theha tikoloho ea nts'etsopele ebe o hlakisa kopo ho ex.ampKena ho ESP32-H2-DevKitM-1 ea hau.
Litaba le Package
Ho Odara Boitsebiso
Boto ea ntlafatso e na le mefuta e fapaneng eo u ka khethang ho eona, joalo ka ha ho bontšitsoe tafoleng e ka tlase.
| Khoutu ea ho Odara | Mojule ea boto | Khanya [A] | PSRAM | Antenna |
| ESP32-H2-DevKitM-1-N4 | ESP32-H2-MINI-1 | 4 MB | 0 MB | PCB ka boto |
| Khoutu ea ho Odara | Mojule ea boto | Khanya [A] | PSRAM | Antenna |
| ESP32-H2-DevKitM-1U-N4 | ESP32-H2-MINI-1U | 4 MB | 0 MB | Externalanten |
Retail Orders
Haeba o laela e le 'ngoe kapa tse' maloa sampLeha ho le joalo, ESP32-H2-DevKitM-1 ka 'ngoe e tla ka sephutheloana se le seng ka mokotleng oa sta c kapa sephutheloana sefe kapa sefe ho latela morekisi oa hau.
Bakeng sa liodara tsa mabenkele, ka kopo, etela ho https://www.espressif.com/en/company/contact/buy-a-sample
Litaelo tsa Wholesale
Haeba o laela ka bongata, mapolanka a tla ka mabokose a maholo a li-cardboard.
Bakeng sa liodara tse ngata, ka kopo, etela ho https://www.espressif.com/en/contact-us/sales-queson
Hardware Reference
Setšoantšo se Thibeloang
Setšoantšo sa block se ka tlase se bontša likarolo tsa ESP32-H2-DevKitM-1 le khokahano ea tsona.
Likhetho tsa Phepelo ea Matla
Ho na le mekhoa e meraro e ikhethileng ea ho fana ka matla ho boto:
USB Type-C ho ea boema-kepeng ba UART, phepelo ea motlakase ea kamehla 5V le GND pin headers 3V3 le GND pin headers
Tekanyo ea Hona Joale
Lihlooho tsa J5 ho ESP32-H2-DevKitM-1 (sheba J5 ho Setšoantšo sa ESP32-H2-DevKitM-1 - Front) li ka sebelisoa ho metha ea hajoale e huloang ke module ea ESP32-H2-MINI-1/1U:
Tlosa jumper: Phepelo ea motlakase lipakeng tsa mojule le li-peripheral tse botong e khaotsoe. Ho lekanya hore na mojule o sebetsa joang, hokela boto le ammeter ka lihlooho tsa J5.
Sebelisa jumper (fektheri ea kamehla): Khutlisa tšebetso e tloaelehileng ea boto.
Hlokomela
Ha o sebelisa lihlooho tsa 3V3 le GND pin ho matlafatsa boto, ka kopo tlosa jumper ea J5, 'me u kopanye ammeter ka tatellano ho potoloho ea kantle ho metha hore na mojule ke ofe.
Thibelo ea Hlooho
Litafole tse peli tse ka tlase li fana ka Lebitso le mosebetsi oa lihlooho tsa phini mahlakoreng ka bobeli a boto (J1 le J3). Mabitso a lihlooho tsa phini a bontšoa ho Pin Layout. Linomoro li tšoana le tsa ESP32-H2-DevKitM-1 Schema c. (sheba anached PDF).
J1
| Che. | Lebitso | Mofuta 1 | Mosebetsi |
| 1 | 3V3 | P | 3.3 V phepelo ea motlakase |
| 2 | RST | I | Holimo: e nolofalletsa chip; Tlase: chip ea tima; e amanang le in |
| 3 | 0 | I/O/T | GPIO0, FSPIQ |
| 4 | 1 | I/O/T | GPIO1, FSPICS0, ADC1_CH0 |
| 5 | 2 | I/O/T | GPIO2, FSPIWP, ADC1_CH1, MMS |
| 6 | 3 | I/O/T | GPIO3, FSPIHD, ADC1_CH2, MTDO |
| 7 | 13/N | I/O/T | GPIO13, XTAL_32K_P 2 |
| 8 | 14/N | I/O/T | GPIO14, XTAL_32K_N 3 |
| 9 | 4 | I/O/T | GPIO4, FSPICLK, ADC1_CH3, MTCK |
| Che. | Lebitso | Mofuta 1 | Mosebetsi |
| 10 | 5 | I/O/T | GPIO5, FSPID, ADC1_CH4, MTDI |
| 11 | NC | – | NC |
| 12 | VBAT | P | 3.3 V motlakase kapa betri |
| 13 | G | P | Fatše |
| 14 | 5V | P | 5 V phepelo ea motlakase |
| 15 | G | P | Fatše |
J3
| Che. | Lebitso | Mofuta 1 | Mosebetsi |
| 1 | G | P | Fatše |
| 2 | TX | I/O/T | GPIO24, FSPICS2, U0TXD |
| 3 | RX | I/O/T | GPIO23, FSPICS1, U0RXD |
| 4 | 10 | I/O/T | GPIO10, ZCD0 |
| 5 | 11 | I/O/T | GPIO11, ZCD1 |
| 6 | 25 | I/O/T | GPIO25, FSPICS3 |
| 7 | 12 | I/O/T | GPIO12 |
| le 8 | 8 | I/O/T | GPIO8 4, LOG þ |
| 9 | 22 | I/O/T | GPIO22 |
| 10 | G | P | Fatše |
| 11 | 9 | I/O/T | GPIO9, BOOT |
| 12 | G | P | Fatše |
| 13 | 27 | I/O/T | GPIO27, FSPICS5, USB_D+ |
| 14 | 26 | I/O/T | GPIO26, FSPICS4, USB_D- |
| 15 | G | P | Fatše |
- (1,2): P: Phepelo ea motlakase; I: Kenyeletso; O: Sephetho; T: Boipheliso bo phahameng.
- Ha o hokahantsoe le XTAL_32K_P ka har'a module, phini ena e ke ke ea sebelisoa molemong o mong.
- Ha o hokahantsoe le XTAL_32K_N ka har'a module, phini ena e ke ke ea sebelisoa molemong o mong.
- E sebelisetsoa ho khanna RGB LED ka hare ho module.
Bakeng sa lintlha tse ling mabapi le tlhaloso ea phini, ka kopo bona Letlapa la ESP32-H2.
Sebopeho sa Pin
Lintlha tsa ntlafatso ea Hardware
Ha ho liphetolelo tse fetileng tse fumanehang.
- Lethathamo la lintlha tsa ESP32-H2
- Lethathamo la lintlha tsa ESP32-H2-MINI-1/1U (PDF)
- Lethathamo la lintlha tsa ESP32-H2-DevKitM-1 (PDF)
- Moralo oa ESP32-H2-DevKitM-1 PCB (PDF)
- ESP32-H2-DevKitM-1 Litekanyo (PDF)
- ESP32-H2-DevKitM-1 Dimensions source file (DXF)
Bakeng sa litokomane tse ling tsa moralo oa boto, ka kopo ikopanye le rona ho sales@espressif.com
Fana ka maikutlo mabapi le tokomane ena
Litokomane / Lisebelisoa
 |
ESPRESSIF ESP32-H2-DevKitM-1 Boto ea Nts'etsopele ea Boemo ba Kena [pdf] Bukana ea Mosebelisi ESP32-H2-DevKitM-1, ESP32-H2-DevKitM-1 Boto ea Nts'etsopele ea Keno, Boto ea Ntlafatso ea Maemo a Kena, Boto ea Nts'etsopele ea Maemo, Boto ea Nts'etsopele, Boto. |
