Litaba pata
1 EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer
2 Litlhophiso tsa kamehla tsa feme 5/2D
3 Litlhophiso tsa lenaneo la fektheri
4 Ho tsosolosa moqapi oa lenaneo
5 Ho beha letsatsi le nako
6 ON/OFF khetho ea nako
7 Ho fetola litlhophiso tsa lenaneo
8 Reviewho kenya li-setting tsa lenaneo
9 Matlafatsa tshebetso
10 Mosebetsi o tsoetseng pele
11 Mokhoa oa matsatsi a phomolo
12 Hokela thermostat ea RF le moetsi oa lenaneo
13 Tlosa thermostat ea RF ho moetsi oa lenaneo
14 Khetho ea mokhoa oa backlight
15 Senotlolo le ho notlolla
16 Mosebetsi oa ho kopitsa
17 Mosebetsi oa tšireletso ea serame
18 Master reset
19 Litokomane / Lisebelisoa
19.1 Litšupiso
20 Related Posts

EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer logo

EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer

EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer sehlahisoaTLHOKOMELO!
Pele o qala, tlosa sesebelisoa ho tsoa ho mains. Ho na le likarolo tse tsamaisang li-main voltage ka mora sekwahelo. Le ka mohla u se ke ua tsamaea u sa behoa leihlo ha e butsoe. (Thibela bao e seng litsebi haholo-holo bana ho e fumana.)
Le ka mohla u se ke ua tlosa sehlahisoa sena ho baseplate ea motlakase. Tlosa ho phepelo ea motlakase ha ho ka ba le ts'enyehelo ho likonopo life kapa life. Se ke oa sebelisa lisebelisoa tse bohale ho tobetsa konopo efe kapa efe.

Bohlokoa: Boloka tokomane ena
Lenaneo lena la 4 zone RF le etselitsoe ho fana ka taolo ea HO ON/OFF bakeng sa libaka tse 4, ka ts'ebeliso ea boleng ba ts'ireletso ea serame.

 Litlhophiso tsa kamehla tsa feme 5/2D

  • Lenaneo: 5/2D
  • Lebone le ka morao: Buletse
  • Keypad: E notletsoe
  • Tšireletso ea serame: E tima

 Litlhophiso tsa lenaneo la fektheri

EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 01 5/2D
P1 TSOELA P1 TLHOKOMELA P2 TSOELA P2 TLHOKOMELA P3 TSOELA P3 TLHOKOMELA
Mantaha-Labohlano 6:30 8:30 12:00 12:00 16:30 22:30
Sat-Letsatsi 7:30 10:00 12:00 12:00 17:00 23:00

Matsatsi a 7 kaofela

 7D
P1 TSOELA P1 TLHOKOMELA P2 TSOELA P2 TLHOKOMELA P3 TSOELA P3 TLHOKOMELA
6:30 8:30 12:00 12:00 16:30 22:30

Letsatsi le letsatsi

 24H
P1 TSOELA P1 TLHOKOMELA P2 TSOELA P2 TLHOKOMELA P3 TSOELA P3 TLHOKOMELA
6:30 8:30 12:00 12:00 16:30 22:30

Ho tsosolosa moqapi oa lenaneo

Hoa hlokahala ho tobetsa konopo ea RESET pele ho lenaneo la pele. Konopo ena e ka morao ho sekoaelo se ka pele ho yuniti. EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 08

Ho beha letsatsi le nako

Theola sekoahelo se ka pele ho yuniti.
Tsamaisa switjha ho ea sebakeng sa CLOCK SET.

  • Tobetsa eaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 02 likonopo ho khetha letsatsi. TobetsaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 03
  • Tobetsa eaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 02 likonopo ho khetha khoeli. TobetsaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 03
  • Tobetsa eaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 02 likonopo ho khetha selemo. TobetsaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 03
  • Tobetsa eaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 02 likonopo ho khetha hora. TobetsaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 03
  • Tobetsa eaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 02 likonopo ho khetha motsotso. TobetsaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 03
  • Tobetsa eaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 02 likonopo ho khetha 5/2D, ​​7D kapa 24H TobetsaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 03

Letsatsi, nako le mosebetsi li se li behiloe. Tsamaisa sekhetho sebakeng sa RUN ho tsamaisa lenaneo, kapa ho PROG SET boemo ho fetola maemo a lenaneo.

 ON/OFF khetho ea nako

Ho na le mekhoa e 4 e fumanehang lenaneong lena bakeng sa basebelisi ho ikhethela ts'ebeliso ea bona ka bomong.

  • AUTO Sebatli se sebetsa linako tse 3 tsa 'ON/OFF' ka letsatsi.
  • LETSATSI KAOFELA Sebatli se sebetsa nako ea 1'ON/OFF' ka letsatsi. Sena se sebetsa ho tloha nakong ea pele ea ON ho isa nakong ea boraro OFF.
  • ON The programmer ke ka ho sa feleng ka. **ON**
  • HO TLOA Sebapali se tima ka ho sa feleng. **TLOA**

Theola sekoahelo se ka pele ho yuniti. Ka ho tobetsa konopo ea EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 04konopo, o ka fetola pakeng tsa AUTO / ALL LETSATSI / ON / OFF bakeng sa Zone 1. Pheta ts'ebetso ena bakeng sa Zone 2 ka ho tobetsa EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 05 konopo, bakeng sa Zone 3 ka ho tobetsa konopo eaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 06le bakeng sa Zone 4 ka ho tobetsa konopo eaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 07

Ho fetola litlhophiso tsa lenaneo

EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 08Theola sekoahelo se ka pele ho yuniti. Tsamaisa switjha ho ea sebakeng sa PROG SET. Hona joale u ka khona lenaneo la zone 1.

  • Tobetsa ea EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 02likonopo ho lokisa P1 KA nako. TobetsaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 03
  • Tobetsa ea EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 02likonopo ho lokisa nako ea P1 OFF. TobetsaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 03

Pheta ts'ebetso ena ho lokisa linako tsa ON & OFF bakeng sa P2 & P3. TobetsaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 05 'me u phete mokhoa o ka holimo ho ikamahanya le Zone2. Tobetsa  EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 06'me u phete mokhoa o ka holimo ho ikamahanya le Zone3. TobetsaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 07  'me u phete mokhoa o ka holimo ho ikamahanya le Zone4. Ha o qetile, suthisa switjha ho ea sebakeng sa RUN.

Reviewho kenya li-setting tsa lenaneo

EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 08

Theola sekoahelo se ka pele ho yuniti. Tsamaisa switjha ho ea sebakeng sa PROG SET.
Ka ho tobetsaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 03  sena se tla review nako e 'ngoe le e' ngoe ea ON/OFF bakeng sa P1 ho ea ho P3 bakeng sa Zone 1. TobetsaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 05 'me u phete mokhoa o ka holimo ho ikamahanya le Zone 2. TobetsaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 06 'me u phete mokhoa o ka holimo ho ikamahanya le Zone 3. TobetsaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 06 'me u phete mokhoa o ka holimo ho ikamahanya le Zone 4. Ha u qetile, suthisa sesebelisoa sa ho khetha ho ea sebakeng sa RUN.

Matlafatsa tshebetso

Ts'ebetso ena e lumella mosebelisi ho eketsa nako ea ON bakeng sa lihora tse 1, 2 kapa 3. Haeba sebaka seo u lakatsang ho se Boost se behiloe ka nako hore se TSHOE, u na le sebaka sa ho se BUA bakeng sa lihora tse 1, 2 kapa tse 3.
Tobetsa konopo e hlokahalang:
EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 09 bakeng sa Zone 1,EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 10 bakeng sa Zone 2, EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 11bakeng sa Zone 3 le EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 12bakeng sa Zone 4 - hang, habeli kapa ka makhetlo a mararo ka ho latellana. Ho hlakola ts'ebetso ea boost, tobetsa feela konopo ea boost hape.

 Mosebetsi o tsoetseng pele

Ts'ebetso ena e lumella mosebelisi ho tlisa nako e tlang ea ho fetoha. Haeba sebaka ha joale se behiloe nako ea ho tima 'me ADV e hatelloa, sebaka se tla buloa ho fihlela qetellong ea nako e latelang ea ho fetola. Haeba sebaka ha joale se behiloe nako ea ho BONAHALA 'me ADV e hatelloa, sebaka se tla tima ho fihlela qetellong ea nako e latelang ea ho fetola.
Tobetsa EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 13bakeng sa Zone 1, EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 14bakeng sa Zone 2EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 15 kapa bakeng sa Zone 3 le EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 16bakeng sa Zone 4.Ho hlakola tšebetso ea ADVANCE, tobetsa feela konopo e fapaneng ea ADV hape.

Mokhoa oa matsatsi a phomolo

Theola sekoahelo se ka pele ho yuniti. Tsamaisa switjha ho ea sebakeng sa RUN.EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 08Tobetsa eaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 17 konopo. Letsatsi le nako ea hajoale li tla benya skrineng. Hona joale hoa khoneha ho kenya letsatsi le nako eo u rerileng ho khutla ka eona.

  • Tobetsa ea EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 02 likonopo ho khetha letsatsi. Tobetsa EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 17
  • Tobetsa ea EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 02 likonopo ho khetha khoeli. TobetsaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 17
  • Tobetsa eaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 02 likonopo ho khetha selemo. Tobetsa EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 17
  • Tobetsa eaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 02 likonopo ho khetha hora. Tobetsa EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 17

Ho kenya tshebetsong Mokgwa wa Holiday tobetsa konopo ya EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 03konopo. Ho hlakola Mokgwa wa Phomolo tobetsa konopo ya EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 03 konopo hape. Ho seng joalo, Holiday mode e tla tima ka nako le letsatsi tse kentsoeng.

 Hokela thermostat ea RF le moetsi oa lenaneo

Theola sekoaelo se ka pele ho moetsi oa lenaneo. Ho na le lihokelo tse 'ne tse tšoereng sekoahelo sebakeng. Pakeng tsa 3rd le 4th hinges ho na le lesoba le chitja. Kenya bolo ea pene kapa ntho e ts'oanang le eona ho hlophisa sebatli bocha. Kamora ho tobetsa konopo ea master reset, letsatsi le nako joale li tla hloka ho hlophisoa bocha.
EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 08Theola sekoaelo se ka pele 'me u tsamaise switch ea khetho sebakeng sa RUN. Tobetsa konopo EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 18bakeng sa metsotsoana e 5. Wireless Connect e tla hlaha skrineng. Ho thermostat ea kamore e se nang mohala ea RFR kapa thermostat ea silinda e se nang mohala ea RFC Tobetsa konopo ea Khoutu. Sena se fumaneha ka hare ho matlo a PCB.

Ho moetsi oa lenaneo
Zone 1 e tla qala ho benya. Tobetsa ea EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 04, EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 05 , EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 06or  EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 07  konopo ea sebaka seo u lakatsang ho hokela thermostat ho sona. Letšoao la waeleseEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 19 e hlaha skrineng. Thermostat e tla balla holimo ho palo ea sebaka seo e parakantsoeng le eona. Ha e fihla palo ea sebaka seo e se kopantseng le ho tobetsa handwheel ho thermostat. Hona joale sebatli se sebetsa ka mokhoa o se nang mohala. Thempereichara ea thermostat e se nang mohala e se e hlahisoa ho moetsi oa lenaneo. Pheta ts'ebetso ena sebakeng sa bobeli, sa boraro le sa bone haeba ho hlokahala.

 Tlosa thermostat ea RF ho moetsi oa lenaneo

Ho moetsi oa lenaneo EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 08Theola sekoaelo se ka pele 'me u tsamaise switch ea khetho sebakeng sa RUN. Tobetsa eaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 18 konopo bakeng sa metsotsoana e 5. Wireless Connect e tla hlaha skrineng. Tobetsa ea EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 18konopo bakeng sa metsotsoana e 3. Sena se tla hlakola likhokahano tsohle tsa RF ka ho tlosa li-thermostats tsohle ho tloha switch ea nako. Tobetsa ea EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 03konopo.

 Khetho ea mokhoa oa backlight

EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 01On

Ho na le li-setting tse peli tsa khetho. Setting ea kamehla ea feme e BUTSE.

  • ON The backlight ke ka ho sa feleng ON.
  • AUTO Ha o tobetsa konopo efe kapa efe, lebone la morao le lula le lutse metsotsoana e 10.

Ho lokisa maemo a backlightEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 08
Theola sekoahelo se ka pele ho yuniti. Tsamaisa switjha ho ea sebakeng sa RUN. Tobetsa ea EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 03 konopo bakeng sa metsotsoana e 5. Tobetsa kapa ho EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 02   likonopo ho khetha mokhoa oa ON kapa AUTO. Tobetsa ea EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 03 konopo.

 Senotlolo le ho notlolla

EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 01 notletsoe
Ho notlela dikonopo, tobetsa o hatelle EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 03 le  EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 17  likonopo bakeng sa metsotsoana e 5. e tla hlaha skrineng. Letlapa la likonopo le se le notletsoe. Ho notlolla letlapa la dikonopo, tobetsa o hatelle EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 03 le EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 17likonopo bakeng sa metsotsoana e 5. e tla nyamela skrineng. Letlapa la likonopo le se le notletsoe.

 Mosebetsi oa ho kopitsa

Mosebetsi oa ho kopitsa o ka sebelisoa feela haeba moetsi oa lenaneo a le mokhoeng oa 7d. Theola sekoaelo se ka pele ho moetsi oa lenaneo. EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 08Tsamaisa switjha ho ea sebakeng sa PROG SET. Taba ea pele, hlophisa le leng la matsatsi a beke ka kemiso eo u lakatsang ho e kopitsa matsatsing a mang. Ha u ntse u le letsatsing leo tobetsa 'me u tšoare COPY  EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 17  konopo bakeng sa metsotsoana e 3. Sena se tla u isa skrineng sa Copy. Letsatsi la beke le lokelang ho kopitsoa lea bontšoa 'me letsatsi leo e lokelang ho kopitsoa ho lona lea phatsima. Tobetsa eaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 20 konopo ea ho kopitsa kemiso ho fihlela kajeno. Tobetsa eaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 18 konopo ea ho tlola letsatsi lena Tsoela pele ka mokhoa ona ka ho tobetsa EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 20 konopo ho kopitsa kemiso ho letsatsi le phatsimang le ka ho tobetsa eaEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 18  konopo ea ho tlola letsatsi leo. Ha o qetile, tobetsa konopo ea  EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 03 konopo. Tsamaisa switjha ho ea sebakeng sa RUN.

Mosebetsi oa tšireletso ea serame

EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 01  E tima

Khetha sebaka sa tafole 5 ~ 20°C. Ts'ebetso ena e etselitsoe ho sireletsa liphaephe khahlano le leqhoa kapa ho thibela mocheso o tlase oa phapusi ha moetsi oa lenaneo a re o TIMA kapa o TLOhile ka letsoho. Tšireletso ea serame e ka etsoa ka ho latela mokhoa o ka tlase.EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 08Tsamaisa switjha ho ea sebakeng sa RUN. Tobetsa ka bobeli baEPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 20le EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 18 likonopo bakeng sa metsotsoana e 5, ho kenya mokhoa oa khetho. Tobetsa kapa ho EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 02 dikonopo tsa ho bulela kapa ho tima Tshireletso ya serame. Tobetsa  EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 03konopo ho netefatsa. Tobetsa kapa ho  EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer 02likonopo ho eketsa kapa ho fokotsa sebaka se lakatsehang sa tšireletso ea serame. Tobetsa ho khetha. Libaka tsohle li tla bulela haeba mocheso oa kamore o oela ka tlase ho sebaka sa tšireletso ea serame.

 Master reset

Theola sekoaelo se ka pele ho moetsi oa lenaneo. Ho na le lihokelo tse 'ne tse tšoereng sekoahelo sebakeng. Pakeng tsa 3rd le 4th hinges ho na le lesoba le chitja. Kenya bolo ea pene kapa ntho e ts'oanang le eona ho hlophisa sebatli bocha. Kamora ho tobetsa konopo ea master reset, letsatsi le nako joale li tla hloka ho hlophisoa bocha.

EPH e Laola Ireland
technical@ephcontrols.com www.ephcontrols.com

EPH e Laola UK
technical@ephcontrols.co.uk www.ephcontrols.co.uk

Litokomane / Lisebelisoa

EPH CONTROLS Vision33R47-RF 4 Zone RF Programmer [pdf] Buka ea Taelo
R47-RF, R47-RF 4 Zone RF Programmer, 4 Zone RF Programmer, RF Programmer, Programmer

Litšupiso

Related Posts

Tlohela maikutlo

Aterese ea hau ea lengolo-tsoibila e ke ke ea phatlalatsoa. Libaka tse hlokahalang li tšoailoe *