ENTTEC OCTO MK2 LED Pixel Controller
ENTTEC's OCTO ke selaoli sa LED se matla le se ka tšeptjoang se etselitsoeng ho isa morero ofe kapa ofe oa meralo, oa khoebo kapa oa boithabiso boemong bo latelang.
Ka li-universe tse 8 tsa phetoho ea eDMX ho pixel protocol le ketane ea marang-rang lipakeng tsa lisebelisoa, OCTO e lumella ho romelloa ka potlako ha li-strip tsa LED le litsamaiso tsa matheba a pixel tse tsamaellanang le liprothokholo tse fetang 20.
OCTO e na le likarolo tse kenyellelitsoeng hantle tse kang konopo ea ho tsebahatsa ho lekola mohala o nepahetseng, ho lekola mocheso, phallo e pharalletseng.tage range (5-60VDC) le tlhophiso e hlakileng le taolo ka sebaka sa eona sa lehae web segokahanyi. Tsohle li fumaneha ka har'a mofuta o mosesane o arohaneng oa 4 DIN oa motlakase.
Enjene ea eona ea inbuilt Fx e lumella basebelisi ho hlophisa le ho etsa li-presets, ba sebelisa OCTO's web segokanyimmediamentsi sa sebolokigolo se ka hlophiswang hore se tsamaise se le seng ka matla ntle le mohlodi wa DMX.
Likaroloana
- Liphetho tse peli * tsa 4-universe tse nang le ts'ehetso ea data le Clock.
- Tšehetso ea ho fihla ho li-universe tse 8 tsa Art-Net, sACN, KiNet le ESP.
- Marang-rang a atolositsoeng habonolo - khokahanyo ea daisy chain ethernet ka lisebelisoa tse ngata.
- Tšehetso ea DHCP kapa Static IP address.
- Liprothokholo tse ngata tsa pixel tse tšehelitsoeng, bona:
www.enttec.com/support/supported-led-pixel-protocols/. - Khetho ea ho phahamisa seporo kapa TS35 DIN.
- Tlhophiso e hlakileng ea sesebelisoa le lintlafatso ka inbuilt web segokahanyi.
- Konopo ea Test/Reset e lumella li-installers hore li hlahlobe ka potlako hore wiring e nepahetse ntle le ho hloka khokahanyo ea marang-rang.
- Mokhoa o bonolo oa jenereithara oa Fx ho theha le ho etsa litlamorao tse seng li setiloe ho fofa, tse lokisehang ho bapala ho tloha ho matla ho ea holimo.
- Ts'ebetso ea ho arola ka lihlopha ho fokotsa palo ea likanale tse kentsoeng.
Polokeho
Etsa bonnete ba hore u tloaelane le lintlha tsohle tsa bohlokoa ka har'a tataiso ena le litokomane tse ling tsa ENTTEC pele u hlalosa, u kenya, kapa u sebelisa sesebelisoa sa ENTTEC. Haeba u na le lipelaelo leha e le life mabapi le polokeho ea sistimi, kapa u rera ho kenya sesebelisoa sa ENTTEC maemong a sa koaheloang kahare ho tataiso ena, ikopanye le ENTTEC kapa mofani oa hau oa ENTTEC bakeng sa thuso.
Tiisetso ea ho khutlela ho motheo ea ENTTEC bakeng sa sehlahisoa sena ha e koahele tšenyo e bakiloeng ke ts'ebeliso e sa nepahalang, ts'ebeliso kapa tokiso ea sehlahisoa.
Tšireletseho ea motlakase
- Sehlahisoa sena se tlameha ho kenngoa ho latela likhoutu tse sebetsang tsa naha le tsa lehae tsa motlakase le tsa kaho ke motho ea tsebang kaho le ts'ebetso ea sehlahisoa le likotsi tse amehang. Ho hloleha ho latela litaelo tse latelang tsa ho kenya ho ka baka lefu kapa kotsi e mpe.
- Se ke oa feta litekanyetso le meeli e hlalositsoeng ho database ea sehlahisoa kapa tokomane ena. Ho feta ho ka baka tšenyo ho sesebelisoa, kotsi ea mollo le mefokolo ea motlakase.
- Netefatsa hore ha ho karolo ea ts'ebetso e teng kapa e ka hokeloa matla ho fihlela likhokahano tsohle le mosebetsi li felile.
- Pele o kenya matla ho instola ea hau, etsa bonnete ba hore kopo ea hau e latela tataiso e ka har'a tokomane ena. Ho kenyeletsoa ho lekola hore lisebelisoa tsohle tsa kabo ea matla le likhoele li maemong a phethahetseng 'me li kentsoe litekanyetso ho latela litlhoko tsa hajoale tsa lisebelisoa tsohle tse hokahantsoeng le ho netefatsa hore li kopantsoe ka nepo ebile li na le matla.tage e lumellana.
- Tlosa motlakase setsing sa hau hang-hang haeba lisebelisoa tsa motlakase kapa li-connectors li senyehile ka tsela leha e le efe, li na le phoso, li bontša matšoao a ho chesa kapa li le metsi.
- Fana ka mokhoa oa ho koala motlakase sebakeng sa hau bakeng sa ts'ebeletso ea sistimi, ho hloekisa le ho hlokomela. Tlosa motlakase sehlahisoa sena ha se sa sebelisoe.
- Netefatsa hore kopo ea hau e sirelelitsoe ho li-circuits tse khutšoane le ho overcurrent. Lithapo tse hlephileng tse potileng sesebelisoa sena ha se ntse se sebetsa, sena se ka fella ka ho potoloha hakhutšoanyane.
- Se ke oa otlolla li-cbling ho lihokelo tsa sesebelisoa 'me u netefatse hore cabling ha e sebelise matla
ea PCB. - Se ke oa sebelisa matla a 'hot swap' kapa 'hot plug' ho sesebelisoa kapa lisebelisoa tsa sona.
- Se ke oa hokela leha e le efe ea lisebelisoa tsena lihokelo tsa V- (GND) lefatšeng.
- Se ke oa hokela sesebelisoa sena ho pakete ea dimmer kapa motlakase o moholo.
Moralo oa Tsamaiso le Tlhaloso
- Ho kenya letsoho ho mocheso o nepahetseng oa ts'ebetso, moo ho khonehang thibela sesebelisoa sena ho tsoa letsatsing le tobileng.
- Lintlha tsa pixel ha li tsamaee ka tsela e le 'ngoe. Netefatsa hore OCTO ea hau e hokahane le matheba a pixel kapa teipi ea hau ka tsela e netefatsang hore data e tsoa ho OCTO ho ea khokahanyo ea 'Data IN' ea pixels tsa hau.
- Sebaka se phahameng ka ho fetesisa se khothaletsoang pakeng tsa tlhahiso ea data ea OCTO le pixel ea pele ke 3m (9.84ft). ENTTEC e eletsa khahlano le ho tsamaisa kh'abela ea data haufi le mehloli ea tšitiso ea motlakase (EMF) ke hore, li-unit tsa mains power cabling / air conditioning.
- Sesebelisoa sena se na le litekanyetso tsa IP20 'me ha sea etsetsoa ho pepesetsoa mongobo kapa mongobo o fokolang.
- Netefatsa hore sesebelisoa sena se sebetsa ka har'a maemo a boletsoeng ka har'a database ea sehlahisoa sa sona.
Tšireletso ho tsoa Kotsing Nakong ea ho Kenya
- Ho kenya sehlahisoa sena ho tlameha ho etsoa ke basebetsi ba tšoanelehang. Haeba u sa tiisehe kamehla buisana le setsebi.
- Kamehla sebetsa ka leano la ho instola le hlomphang mefokolo eohle ea sistimi joalo ka ha ho hlalositsoe ka har'a tataiso ena le database ea sehlahisoa.
- Boloka OCTO le lisebelisoa tsa eona ka har'a sephutheloana sa eona se sireletsang ho fihlela ho kengoa ha ho qetela.
- Ela hloko nomoro ea serial ea OCTO e 'ngoe le e' ngoe 'me u e kenye ho moralo oa hau oa moralo bakeng sa tšebeliso ea nako e tlang ha u sebeletsa. Khokahano eohle ea marang-rang e lokela ho felisoa ka sehokelo sa RJ45 ho latela T-568B.
maemo. - Kamehla sebelisa lisebelisoa tse loketseng tsa ho itšireletsa ha u kenya lihlahisoa tsa ENTTEC.
- Hang ha ts'ebetso e phethiloe, hlahloba hore na lisebelisoa tsohle le likarolo li teng ka mokhoa o sireletsehileng 'me li tlameletsoe ho meaho e tšehetsang haeba ho hlokahala.
Litaelo tsa Tšireletso ea Tlhophiso
- Sesebelisoa se pholisitsoe, etsa bonnete ba hore se fumana moea o lekaneng hore mocheso o ka qhaloa.
- U se ke ua koahela sesebelisoa ka thepa ea insulate ea mofuta ofe kapa ofe.
- Se ke oa sebelisa sesebelisoa haeba mocheso oa tikoloho o feta o boletsoeng ho litlhaloso tsa sesebelisoa. U se ke ua koahela kapa ua koala sesebelisoa ntle le mokhoa o loketseng le o tiisitsoeng oa ho qhala mocheso.
- Se ke oa kenya sesebelisoa ho damp kapa dibaka tse metsi.
- U se ke ua fetola hardware ea sesebelisoa ka tsela leha e le efe.
- Se ke oa sebelisa sesebelisoa haeba u bona matšoao a tšenyo.
- Se ke oa tšoara sesebelisoa se le maemong a matla.
- U se ke ua silakanya kapa ua clamp sesebelisoa nakong ea ho kenya.
- Se ke oa saena sistimi ntle le ho etsa bonnete ba hore likhoele tsohle tsa sesebelisoa le lisebelisoa li thibetsoe ka nepo, li sirelelitsoe ebile ha li na khatello.
Litekanyo tsa 'Mele 
Litšoantšo tsa Wiring
- Fumana OCTO le PSU haufi ka moo ho ka khonehang ho pixel ea pele ka ketane ea hau ho fokotsa tšusumetso ea vol.taglerotholi.
- Ho fokotsa monyetla oa ho ba le voltage kapa Electro Magnetic Interference (EMI) e susumetsoang methating ea mats'oao a taolo, moo ho khonehang, tsamaisa cabling ea taolo hole le motlakase o moholo kapa lisebelisoa tse hlahisang EMI e phahameng, (ke hore, li-air conditioning units). ENTTEC e khothaletsa sebaka se phahameng sa thapo ea data ea limithara tse 3. Ha sebaka sa thapo se le tlase, matla a molumo a tlasetaglerotholi.
- Ho etsa bonnete ba hore ho na le khokahanyo e tšepahalang, ENTTEC e khothalletsa tšebeliso ea lithapo tsa likhoele bakeng sa lithapo tsohle tse hokeletsoeng ho li-screw terminals tsa OCTO.
Mounting Options 
Hlokomela: Li-tab tsa holim'a lithaba li etselitsoe ho boloka boima ba OCTO feela, matla a feteletseng a bakoang ke khatello ea cable e ka baka tšenyo.
Likarolo tse sebetsang
- OCTO e tšehetsa mekhoa e latelang ea ho kenya:
- Art-Net
- Ho phallela ACN (sACN)
- KiNET
- ESP
- OCTO e tsamaisana le liprothokholo tsa pixel tse lumellanang le tsa asynchronous. Bakeng sa lenane la morao-rao ka kopo sheba ho: www.enttec.com/support/supported-led-pixel-protocols/.
- Tšehetso ea RGB, RGBW le White Pixel Order
- Sehokelo se bonolo sa mosebelisi ho theha le ho phethahatsa litlamorao tsa ho fofa.
- Boloka litlamorao ho bapala ho tloha ho matla a holimo.
- Sekhahla se phahameng sa ho hlasimolla ke liforeimi tse 46 motsotsoana.
Likarolo tsa Hardware
- Ntlo ea polasetiki ea ABS e kentsoeng ka motlakase.
- Letšoao la boemo ba LED bo shebileng pele.
- Khetha / Reset konopo.
- Li-terminal blocks tse ka kengoang.
- Letšoao la Khokahano le Ketsahalo ea LED e hahelletsoeng boema-kepeng bo bong le bo bong ba RJ45.
- Marang-rang a atolositsoeng habonolo - ketane ea daisy ho fihla ho li-unit tse 8 haeba tlhahiso e le ka mokhoa o tobileng ho netefatsa sync lipakeng tsa pixels. Haeba e sebelisoa ka mokhoa oa Standalone, ho ka hokelloa lisebelisoa tse 50 ka ketane ka 'ngoe.
- Sebaka se holim'a metsi kapa TS35 DIN mount (ho sebelisoa sehlomathiso se fanoeng sa DIN Clip).
- Tokiso ea wiring e feto-fetohang.
- Sesebelisoa sa terene sa 35mm DIN (e kenyelelitsoe ka har'a sephutheloana).
Letšoao la boemo ba LED
Letšoao la boemo ba LED le ka sebelisoa ho tseba boemo ba hajoale ba OCTO. Naha ka nngwe e tjena:
| LED Mmala | OCTA Boemo |
| Bosoeu (static) | Qetello |
| Botala bo Benyang | Ho fumana data ka mokhoa o tobileng |
| E ntšo holim'a Bosoeu | Mokhoa o ikemetseng |
| E khubelu holim'a Botala | Mehloli e mengata ea ho kopanya |
| Bopherese | Khohlano ea IP |
| Khubedu | Sesebelisoa se qalile / phoso |
Joalo ka ha lebitso le fana ka maikutlo, konopo ena e ka sebelisoa ho:
- Hlalosa lipikselse tse hokahaneng le OCTO e itseng ntle le tlhoko ea ho fana ka data ea taolo. Ha konopo e hatelloa ka ts'ebetso e tloaelehileng, li-universe tsohle tse 8 tse hlahisoang li behiloe ho hlahisa boleng bo phahameng ka ho fetisisa (255) bakeng sa metsotsoana e 10 pele bo qala boemo ba bona ba pele. Ena ke teko e ntle ea ho netefatsa hore liphetho tsohle li hokahane 'me li sebetsa kamoo li reriloeng.
Node: Nako e ke ke ea qala bocha ha e tobetsoa ka tatellano. - Seta bocha OCTO (Sheba Karolo ea Reset OCTO ea tokomane ena).
Ka ntle ho Lebokose
OCTO e tla hlophisoa ho aterese ea IP ea DHCP e le ea kamehla. Haeba seva sa DHCP se lieha ho arabela, kapa marang-rang a hau a se na DHCP, OCTO e tla khutlela ho Static IP address e tla ba 192.168.0.10 e le ea kamehla. Ka ho sa feleng OCTO e tla fetolela 4 Universe of Art-Net ho protocol ea WS2812B ho e 'ngoe le e 'ngoe ea likou tsa Phoenix Connector tsa OCTO. Port 1 e tla hlahisa 0 ho ea ho 3 ea Art-Net, 'me Port 2 e tla hlahisa 4 ho isa ho 7 ea Art-Net.
Marang-rang
OCTO e ka hlophisoa hore e be aterese ea DHCP kapa ea Static IP.
DHCP: Ha motlakase o le matla 'me DHCP e nolofalitsoe, haeba OCTO e le marang-rang ka sesebelisoa / router e nang le seva sa DHCP, OCTO e tla kopa aterese ea IP ho tswa ho seva. Haeba seva sa DHCP se lieha ho araba, kapa marang-rang a hau a se na DHCP, OCTO e tla khutlela ho aterese ea IP e tsitsitseng. Haeba ho fanoe ka aterese ea DHCP, sena se ka sebelisoa ho buisana le OCTO.
IP e tsitsitseng: Ka ho sa feleng (ka ntle ho lebokose) aterese ea IP e tsitsitseng e tla ba 192.168.0.10. Haeba OCTO e e-na le DHCP e koaletsoeng kapa haeba OCTO e oela hape ho aterese ea IP e tsitsitseng ka mor'a hore e se ke ea fumana seva sa DHCP, aterese ea IP e tsitsitseng e fuoang sesebelisoa e tla fetoha aterese ea IP ho buisana le OCTO. Aterese ea ho oela e tla fetoha ho tloha ho ea kamehla hang ha e fetotsoe ho web segokahanyi.
Hlokomela: Ha o hlophisa li-OCTO tse ngata ho netweke ea Static; ho qoba likhohlano tsa IP, ENTTEC e khothaletsa ho hokahanya sesebelisoa se le seng ho marang-rang le ho lokisa IP.
- Haeba u sebelisa DHCP e le mokhoa oa hau oa aterese ea IP, ENTTEC e khothalletsa tšebeliso ea protocol ea sACN, kapa ArtNet Broadcast. Sena se tla etsa bonnete ba hore DIN ETHERGATE ea hau e tsoela pele ho fumana lintlha haeba seva sa DHCP se fetola aterese ea eona ea IP.
- ENTTEC ha e khothaletse data ea unicasting ho sesebelisoa se nang le aterese ea IP e behiloeng ka seva sa DHCP ha ho kengoa nako e telele.
Web Sehokedi
Ho lokisa OCTO ho etsoa ka ho web interface e ka hlahisoang ho efe kapa efe ea sejoale-joale web sebatli.
- Hlokomela: Ho khothaletsoa sebatli se thehiloeng ho Chromium (ke hore, Google Chrome) bakeng sa ho fihlella OCTO's web
segokahanyi. - Hlokomela: Joalokaha OCTO e tsamaisa a web seva marang-rang a lehae mme ha e na Setifikeiti sa SSL (se sebelisetsoang ho boloka litaba tsa inthanete), the web sebatli se tla hlahisa temoso ea 'Ha e sireletsehe', sena se ka lebelloa.
Aterese ea IP e tsebahalang: Haeba u tseba aterese ea IP ea OCTO (ebang ke DHCP kapa Static), joale aterese e ka tlanya ka ho toba web libatli URL lebala.
Aterese ea IP e sa tsejoeng: Haeba o sa tsebe ka aterese ea IP ea OCTO (e ka ba DHCP kapa Static) mekhoa e latelang ea ho sibolla e ka sebelisoa netwekeng ea lehae ho fumana lisebelisoa:
- Sesebelisoa sa IP scanning software (ke hore, Angry IP Scanner) se ka tsamaisoa ho netweke ea lehae ho khutlisa a
lethathamo la lisebelisoa tse sebetsang ho netweke ea lehae. - Lisebelisoa li ka fumanoa ho sebelisoa Art Poll (ke hore, DMX Workshop haeba e setiloe ho sebelisa ArtNet).
- Sesebelisoa Aterese ea IP ea Default e tla hatisoa leiboleng e ka morao ea sehlahisoa.
- ENTTEC mahala NMU (Node Management Utility) software bakeng sa Windows le MacOS (tšehetso ho fihlela ho Mac OSX 10.11), e tla sibolla lisebelisoa tsa ENTTEC ho Local Area Network, e bonts'a liaterese tsa bona tsa IP pele u khetha ho Lokisa sesebelisoa, ho bula sesebelisoa. Web Sehokedi. Tlhokomeliso: OCTO e tšehetsoa ke NMU V1.93 le holimo.
Hlokomela: Li-protocol tsa eDMX, molaoli le sesebelisoa se sebelisang ho lokisa OCTO li tlameha ho ba sebakeng se le seng sa Local Area Network (LAN) 'me se be ka har'a marang-rang a IP a tšoanang le a OCTO. Bakeng sa mohlalaample, haeba OCTO ea hau e ho Static IP address 192.168.0.10 (Default), joale komporo ea hau e lokela ho hlophisoa ho hong joalo ka 192.168.0.20. Ho boetse ho khothaletsoa hore lisebelisoa tsohle tsa Subnet Mask li tšoane marang-rang a hau.
Top Menu
Lenaneo le holimo le lumella bohle OCTO web maqephe a lokelang ho fihleloa. Khetho ea menu e totobalitsoe ka boputsoa ho bontša hore na mosebelisi o leqepheng lefe.
Lehae
Taba ea Lehae e hlahisa lintlha tse latelang:
- Boemo ba DHCP - (e ka ba bo nolofalitsoe / bo holofetse).
- Aterese ea IP.
- Netmask.
- Tsela.
- Aterese ea Mac.
- Lebelo Lehokelo.
- Node Lebitso.
- Mofuta oa Firmware sesebelisoa.
- Nako ea tsamaiso.
- Input protocol e behiloe sesebelisoa.
- Output LED protocol set on sesebediswa.
- Botho.
Litlhophiso
Leqephe la Litlhophiso le lumella mosebelisi ho etsa se latelang:
- Fetola lebitso la sesebelisoa bakeng sa boitsebiso.
- Lumella/thibela DHCP.
- Hlalosa litlhophiso tsa marang-rang tse sa fetoheng.
- Beha tlhahiso ea LED Protocol.
- Beha palo ea lipikselse tse entsoeng 'mapeng.
- Lokisa hore na mebala e entsoe joang ho ea ho pixels ka ts'ebetso ea Pixel Order.
- Khutlisetsa ho liphoso tsa feme.
- Qala sesebelisoa hape
Ka ho toba
Mokhoa o tobileng o ka etsoa ka ho tobetsa konopo ea 'Sebelisa Direct mode' leqepheng la Direct joalokaha ho bontšitsoe setšoantšong se ka tlase. 
Ha e kentsoe, lentsoe Direct le tla hlahisoa haufi le logo ea ENTTEC.
Liprotheine tsa DMX
KiNET
Litaelo tse tšehelitsoeng:
- Fumana sesebelisoa.
- Fumana likou ka sesebelisoa.
- Fetola lebitso la sesebelisoa.
- Fetola IP ea sesebelisoa.
- Litaelo tsa Portout.
- DMX tsoa litaelo.
- Taelo ea KGet:
- KGet Subnet Mask.
- KGet Gateway.
- KGet boema-kepe ba bokahohle (boema-kepe ba 1 le 2).
- Litaelo tsa KSet.
- KSet Subnet Mask.
- KSet Gateway.
- Boema-kepe ba KSet (boema-kepe ba 1 le 2).
- KSet sesebelisoa sa ho qala.
Art-Net
E tšehetsa Art-NET 1/2/3/4. Boema-kepe bo bong le bo bong bo ka abeloa bokahohle bo qalang ho tloha ho 0 ho isa ho 32764.
SACN
Litholoana li ka abeloa bokahohle bo qalang ho tloha ho 1-63996 (ha bokahohle / sehlahisoa = 4).
Hlokomela: OCTO e ts'ehetsa bokahohle bo boholo ba 1 ba multicast ka sync ea sACN. (ke hore, bokahohle bohle bo behiloe boleng bo tšoanang)
ESP
Litholoana li ka abeloa bokahohle bo qalang ho tloha ho 0-252 (ha bokahohle / sephetho = 4). Lintlha tse ling tsa protocol ea ESP li ka fumanoa ho www.enttec.com
Bokahohle/Liphello
OCTO e fetolela ho fihla ho li-universe tse 'ne tsa DMX holim'a Ethernet ho data ea pixel ka tlhahiso. Liphetho ka bobeli li ka hlalosoa ho sebelisa bokahohle bo tšoanang, mohlala, liphetho ka bobeli li sebelisa bokahohle 1,2,3 le 4.
Poelo e 'ngoe le e 'ngoe e ka boela ea hlalosoa ho sebelisa sehlopha sa eona sa bokahohle, mohlala, tlhahiso ea 1 e sebelisa bokahohle 100,101,102 le 103 empa tlhahiso ea 2 e sebelisa 1,2,3 le 4.
Ke feela bokahohle ba pele bo ka boleloang; lihloliloeng tse setseng, tsa bobeli, tsa boraro le tsa bone li abeloa bokahohle bo latelang ho ea pele.
Example: Haeba bokahohle ba pele bo abetsoe 9, bokahohle ba bobeli, ba boraro le ba bone bo tla abeloa 10, 11 le 12 ka bohona joalokaha ho bontšitsoe setšoantšong se ka tlase.
Lipikselse tsa sehlopha
Tlhophiso ena e lumella lipikselse tse ngata hore li laoloe joalo ka 'virtual pixel' e le 'ngoe. Sena se fokotsa kakaretso ea liteishene tsa ho kenya tse hlokahalang ho laola strip kapa matheba a pixel.
ExampLe: Ha 'pixel ea sehlopha' e behiloe ho 10 ho OCTO e hokahaneng le bolelele ba pixel strip ea RGB, ka ho patala pixel e le 'ngoe ea RGB ka har'a software ea hau ea taolo le ho romela boleng ho OCTO, li-LED tse 10 tsa pele li ne li tla e arabela.
Hlokomela: Palo e phahameng ka ho fetisisa ea pixels ea 'mele ea LED e ka hokeloang boema-kepeng bo bong le bo bong ke 680 (RGB) kapa 512 (RGBW). Ha u hlophisa lipikselse, palo ea liteishene tsa taolo e hlokahalang e fokotsehile, ts'ebetso ena ha e eketse palo ea li-LED tsa 'mele tsa OCTO e' ngoe le e 'ngoe e ka laolang.
Aterese ea ho qala ea DMX
E khetha nomoro ea mocha ea DMX, e laolang pixel ea pele. Ha bokahohle / sephetho se feta bonngoe, aterese ea ho qala ea DMX e sebetsa feela bokahohleng ba pele.
Leha ho le joalo, moo e sebetsang, offset ea aterese ea ho qala e ka baka karohano ea pixel. mohlala, mocha oa R bokahohleng ba pele le likanale tsa GB sebakeng sa metsotsoana bakeng sa RGB LED.
Bakeng sa ho etsa 'mapa oa pixel habonolo, ENTTEC e khothaletsa ho fokotsa aterese ea ho qala ea DMX ho nomoro e arohanngoa ka palo ea likanale ka pixel. ke hore:
- Keketso ea 3 bakeng sa RGB (ke hore, 1,4,7, 10)
- Keketso ea 4 bakeng sa RGBW (ke hore, 1,5,9,13)
- Keketso ea 6 bakeng sa RGB-16 bit (ke hore, 1,7,13,19)
- Keketso ea 8 bakeng sa li-bits tsa RGBW-16 (ke hore, 1,9,17,25)
E ikemetseng
Standalone e tla sebelisoa ho theha phello ea looping e ka bapaloang morao ho tloha moo OCTO e tsamaisoang teng. - Sena se ka boela sa thusa ho lekola tlhahiso ea OCTO ntle le tlhoko ea ho romella data ea eDMX. Standalone e ka kenngwa tshebetsong ka ho tobetsa konopo ya 'Sebedisa Standalone mode' jwalo ka ha ho bontshitswe ka tlase: Ha e kentswe tshebetsong, lentswe Standalone le tla hlaha haufi le letshwao la ENTTEC.
Hlokomela: Ha o sebetsa ka mokhoa o ikemetseng:
- 16Bit protocol ha e tšehetsoe
- Litheipi tsa RGBW lia tšehetsoa empa tse tšoeu ha li khone ho laoloa.
Bontša likhetho - Ho kenya tšebetsong phello e ikemetseng
OCTO e lumella taolo ea litlamorao tse ikemetseng ho liphetho ka bobeli. Sena se laoloa ke karolo ea Show Options. Ka bobeli li ka hlophisoa hore li se ke tsa hlahisoa ka mokhoa o ikemetseng: 
Liphetho li ka bapala pontšo e tšoanang e ikemetseng ka nako e le 'ngoe: 
Kapa e 'ngoe le e' ngoe e ka hlophisoa ho hlahisa pontšo e fapaneng: 
Ho theha phello e ikemetseng
Pontšo e ikemetseng e ka etsoa feela ha mokhoa oa Standalone o kentsoe tšebetsong. Latela mehato e ka tlase ho theha e ikemetseng (phello):
- Khetha sekotjana se latelang se ikemetseng ebe u tobetsa konopo ea 'create'.
- Khetha tlhahiso eo u batlang ho e etella peleview pontšo e ikemetseng ka ho sebelisa mabokose a cheke.
- Haeba phello peleviewed e lokela ho bolokoa, Ngola lebitso ebe u tobetsa konopo ea 'Save Effect'.
Peleview liphello tse ikemetseng
OCTO e lumella peleview ea e ikemetseng. Khetha sehlahisoa seo u batlang ho se etsa peleview e ikemetseng joalo ka ha e bonts'itsoe setšoantšong se fetileng.
Haeba litaelo tse peli tse fapaneng tsa mebala mohlala: RGB ho tlhahiso 1 le WWA ho tlhahiso ea 2 e abeloa u ka peleview phello sephethong se le seng ka nako. Haeba u leka ho tsoela peleview dipoelo ka bobedi molaetsa o latelang o a hlahiswa.
Lebitso la litlamorao tse ikemetseng
Ho ka sebelisoa litlhaku tse fihlang ho 65 bakeng sa lebitso le ikemetseng. Litlhaku tsohle li tšehelitsoe ntle le koma (,). OCTO ha e lumelle motho ea ikemetseng hore a bolokehe ka lebitso le teng lethathamong.
Likarolo tse ikemetseng li hlalositsoe
Ha u theha e ikemetseng, khanya ea leseli e lokela ho bonoa e le likarolo tse peli:
- Ka morao (taolo e bonts'itsoe ka bofubelu)
- Bokapele (taolo e bonts'itsoe ka boputsoa)
OCTO e na le tšehetso ea mabili a mebala bakeng sa mohala oa pixel oa RGB.
Ka morao
Ka ho nolofalletsa bokamorao feela, tepi/matheba a pixel a tla arabela joalo ka theipi e tloaelehileng ea RGB. Balaoli ba ama bolelele bohle ho fihlela ho lipikselse tse ka khonehang (mohlala, 680 3-channel pixels). Ka pele
Lera lena le hlahisa litlamorao tse koahelang bokamorao ba 'mala. Boemo bo ka pele e ka ba:
- Beha 'mala o tsitsitseng.
- E fifetse.
- E entsoe ho strobe.
- Beha ho etsa lipaterone.
Master intensity
Master intensity e laola khanya ka kakaretso ea tlhahiso (ka bobeli bakeng sa bokapele le bokamorao). Moo: 0 - ha ho li-LED ON.
- 255 - Li-LED tse bonesitsoeng li khanya ka botlalo.
Maqhubu a strobe a ka pele
E laola nako pakeng tsa nako ea ho tima le ho tima LED:
- 0 - Li-LED li bulela le ho tima ka lebelo le tlase haholo.
- 255 - Li-LED li bulela le ho tima ka lebelo le holimo.
Nako ea strobe e ka pele
E laola nako eo li-LED li busitsoeng ka eona:
| DMX fader boleng | On nako |
| 0 | E tswelapele kamehla |
| 1 | Nako e nyane haholo |
| 255 | Nako e telele ka ho fetisisa |
Mosebetsi oa leqhubu
Lera le ka pele le ka laoloa ho etsa lipaterone tsa mesebetsi e latelang ea maqhubu:
- Sine wave.
- Leqhubu la log.
- Sekwere wave.
- Leqhubu la Sawtooth.
- Rainbow Sine Wave.
- Leqhubu la Rainbow Log.
- Rainbow Square Wave.
- Rainbow Sawtooth.
Tsela ea maqhubu
Mokhoa oa maqhubu o ka behoa ho tsamaea. Tlhophiso ea tataiso ea maqhubu e etsa qeto ea hore na paterone e tla tsamaea ka tsela efe. Leqhubu le ka hlophisoa hore le tsamaee:
- Tsoela pele.
- Ka morao.
- Mirror out - mohlala o tsoang bohareng.
- Seipone ho - mohlala o kenang bohareng
Leqhubu amptsebo
Tlhophiso ena e etsa qeto ea ho khanya ha pixel ka 'ngoe nakong ea maqhubu.
| DMX fader boleng | Khanya of pixels ka nako ea maqhubu |
| 0 | E fapana pakeng tsa 50% le e tletseng |
| 255 | Fetoha pakeng tsa ho tima le ho tlala. |
Wavelength
Tlhophiso ena e lekanya palo ea lipikselse nakong e le 'ngoe ea leqhubu
| DMX fader boleng | Wavelength |
| 0-1 | 2 pixels |
| 2-255 | Fader Boleng |
Leqhubu la lebelo
Tlhophiso ena e laola lebelo leo mokhoa oa maqhubu a tsamaeang ka lona ho pholletsa le tepi.
| DMX fader boleng | Lebelo |
| 0 | Bonyane lebelo |
| 255 | Lebelo le phahameng |
Offset
Offset e lumella mohlala o boema-kepeng hore o liehe.
Ho hlophisa sephetho se ikemetseng
OCTO e lumella ho hlophisoa ha phello efe kapa efe e bolokiloeng e ikemetseng. Latela mehato e ka tlase ho hlophisa e ikemetseng:
- Khetha e ikemetseng e lokelang ho hlophisoa ebe o tobetsa konopo ea Edita.
- Khetha tlhahiso eo u batlang ho e etella peleview e ikemetseng ka ho sebelisa mabokose a cheke.
- Fetola e ikemetseng.
- Haeba e ikemetseng peleviewed e lokela ho bolokoa, tobetsa konopo ea Save Effect.
Ho hlakola phello e ikemetseng
Khetha e ikemetseng e lokelang ho hlakoloa ebe o tobetsa konopo ea Tlosa. 
The standalone e khethiloeng bakeng sa tlhahiso ka 'ngoe e tla tsoela pele ho bapala ntle le haeba e hlakotsoe; tabeng ena, standalone ka ho toba ka holimo tla nolofalletsa ka dipholo tsa, e neng e le hlakolwa bontša. Haeba ha ho na standalone ka holimo, ha ho na mokhoa o ikemetseng o tla hlahisoa.
Haeba slot ntle le standalone e hlakotsoe molaetsa o latelang o tla hlaha: 
Ho kopitsa lenaneo le ikemetseng
OCTO e lumella ho kopitsa phello efe kapa efe e bolokiloeng e ikemetseng. Latela mehato e ka tlase ho kopitsa phello e ikemetseng:
- Khetha phello e tla kopitsoa ebe o tobetsa konopo ea Copy.
- Fana ka lebitso le lecha bakeng sa phello e kopilitsoeng e ikemetseng.
Hlokomela: OCTO ha e lumelle mananeo ho bolokoa ka lebitso le tšoanang.
Ho kenya le ho romela kantle lenane le ikemetseng
OCTO e lumella ho kenngoa le ho romelloa ha lipontšo tsohle tse emeng sesebelisoa. Tlhokomeliso: Thekiso file e tla kenyelletsa lethathamo la mananeo ohle a ikemetseng
Ka kopo, tobetsa konopo ea Export Effect ho romela mananeo a ikemetseng:
Ka kopo, tobetsa konopo ea Import Effect ho kenya mananeo a ikemetseng: 
Lipalo-palo tsa marang-rang
Leqephe la Marang-rang le bonts'a lipalo-palo tsa protocol ea DMX e lumelletsoeng. Art-Net
Lintlha tse fanoeng ke:
- Lipakete tsa likhetho li amohetsoe.
- Lipakete tsa data li amohetsoe.
- Lipakete tsa sync li amohetsoe.
- Lipakete tsa ho qetela tsa likhetho tsa IP li amohetsoe ho tsoa.
- Lintlha tsa ho qetela tsa boema-kepe tse fumanoeng ho tsoa.
ESP
Lintlha tse fanoeng ke:
- Lipakete tsa likhetho li amohetsoe.
- Lipakete tsa data li amohetsoe.
- Lipakete tsa ho qetela tsa likhetho tsa IP li amohetsoe ho tsoa.
- Lintlha tsa ho qetela tsa boema-kepe tse fumanoeng ho tsoa.
SACN
Lintlha tse fanoeng ke:
- Lintlha le lipakete tsa sync li amohetsoe.
- Lipakete tsa ho qetela tsa IP li amohetsoe ho tsoa.
- Lintlha tsa ho qetela tsa boema-kepe tse fumanoeng ho tsoa
KiNET
Lintlha tse fanoeng ke:
- Kakaretso ea lipakete tse amohetsoeng.
- Fumana lipakete tsa thepa tse amohetsoeng.
- Fumana lipakete tsa likou tse amoheloang.
- Lipakete tsa DMXOUT.
- KGet lipakete.
- Lipakete tsa KSet.
- PORTOUT lipakete.
- Seta pakete ea lebitso la sesebelisoa e amohetsoe.
- Seta sesebediswa IP pakete amohetsweng.
- Seta lipakete tsa bokahohle tse amoheloang.
- IP ea ho qetela e amohetsoeng ho tsoa.
- Lintlha tsa ho qetela tsa boema-kepe tse fumanoeng ho tsoa.
E nchafatsa firmware
Ho khothaletsoa ka matla hore OCTO e nchafatsoe ka firmware ea morao-rao, e fumanehang ho ENTTEC websebaka. Firmware ena e ka jarolloa ho mokhanni ka eona web interface ka ho etsa mehato e latelang:
- Sheba 'me u khethe mofuta o nepahetseng oa firmware ho PC ea hau.
- Tobetsa konopo ea Update Firmware.
Hang ha ntlafatso ea firmware e phethiloe, sesebelisoa se tla qala hape ha ts'ebetso ea web interface e bonts'a molaetsa o bontšitsoeng setšoantšong se ka tlase: 
Khutlisa ho litlhophiso tsa feme
Ho tsosolosa feme ea OCTO ho hlahisa tse latelang:
- E seta bocha lebitso la sesebelisoa.
- E nolofalletsa DHCP.
- Reset Aterese ea IP e tsitsitseng (IP address = 192.168.0.10).
- E tsosolosa IP ea heke.
- Netmask e behiloe ho 255.0.0.0
- E khutlisetsa mananeo a ikemetseng hore a be maemong a kamehla a feme.
- Mokhoa o tobileng o kentsoe tšebetsong.
- Input protocol e behiloe ho Art-Net.
- LED protocol e behiloe joalo ka WS2812B.
- Mmala oa pixel o behiloe ho RGB.
- Likou ka bobeli li behiloe ho hlahisa li-universe tse 4. Bokahohle ba qalo bakeng sa tlhahiso ea 1 & tlhahiso ea 2 e behiloe e le 0. Boleng ba lipikselse tse entsoeng ka 'mapa bo behiloe ho 680 pixels.
- Aterese ea ho qala ea DMX e behiloe ho 0.
- Matla a lefats'e a APA-102 a behiloe ho fetisisa.
Ho sebelisa web segokahanyi
Reset to defaults taelo e ka fumanoa tlas'a tab ea Litlhophiso tsa OCTO.
Hang ha taelo e hatelloa, pop-up e tla hlaha joalokaha ho bontšitsoe setšoantšong se ka tlase: 
Ho sebelisa konopo ea reset
Konopo ea reset e khutlisetsa tlhophiso ea marang-rang ea OCTO ho mefokolo ea feme:
- Ho khutlela ho li-default tsa feme, mekhoa e latelang e tlameha ho etsoa:
- Tlosa yuniti
- Tobetsa 'me u tšoare konopo ea Reset.
- Ha u ntse u tšoere konopo ea Reset, matlafatsa yuniti, 'me u lule u tšoere konopo ka metsotsoana e 3.
- Tlosa konopo ea Reset hang ha boemo bo etelletsoeng pele bo qala ho benya bofubelu.
Malebela le litataiso
Ha ke khone ho hokela OCTO web segokahanyo:
Netefatsa hore OCTO le komporo ea hau li ho subnet e le 'ngoe Ho rarolla mathata:
- Hokela OCTO ka kotloloho khomphuteng ea hau u sebelisa thapo ea Cat5 'me u e bulele.
- Fa komporo ea hau aterese ea IP e tsitsitseng (mohlala: 192.168.0.20)
- Fetola komporo ea Netmask ho (255.0.0.0)
- Bula NMU ebe u khetha adaptara ea netweke e hokahantsoeng le OCTO ea hau.
- Haeba u na le marang-rang a mangata (WiFi joalo-joalo), ka kopo leka ho tima marang-rang a mang kaofela ntle le eo OCTO e hokahaneng le eona.
- Hang ha NMU e fumana OCTO, u tla khona ho bula sesebelisoa webleqepheng la 'me u e hlophise.
- Fektheri Seta sesebelisoa hape u sebelisa konopo haeba u latela mehato e kaholimo 'me u fetele ho IP ea kamehla ea OCTO haeba sena se sa rarolle bothata.
Na hoa khoneha ho tsamaisa litheipi le matheba a pixel ho sebelisa liprothokholo tse fapaneng le voltages ka nako e le 'ngoe?
Che, ho ka khethoa protocol e le 'ngoe feela ea LED ho tsamaisa tlhahiso ka nako e behiloeng.
Ke bonyane ba DC voltagna bakeng sa ho matlafatsa OCTO?
Bonyane DC voltage OCTO e hloka ho sebetsa ke 4v.
Tshebeletso, Tekolo le Tlhokomelo
- Sesebelisoa ha se na likarolo tse ka sebelisoang ke mosebelisi. Haeba ts'ebetso ea hau e senyehile, likarolo li lokela ho nkeloa sebaka.
- Fokotsa sesebelisoa mme u netefatse hore ho na le mokhoa oa ho thibela sistimi hore e se ke ea matlafala nakong ea ts'ebeletso, tlhahlobo le tlhokomelo.
Libaka tsa bohlokoa tse lokelang ho hlahlojoa nakong ea tlhahlobo:
- Netefatsa hore likhokahano tsohle li hokahane ka mokhoa o sireletsehileng 'me ha li bontše letšoao la tšenyo kapa ho bola.
- Etsa bonnete ba hore li-cabling tsohle ha lia senyeha 'meleng kapa ha li sotlehile.
- Sheba lerōle kapa litšila holim'a sesebelisoa 'me u hlophise ho hloekisa ha ho hlokahala.
- Litšila kapa lerōle le bokellaneng li ka fokotsa bokhoni ba sesebelisoa sa ho qhala mocheso 'me se ka baka tšenyo.
Sesebelisoa se ncha se lokela ho kenngoa ho latela mehato eohle ka har'a tataiso ea ho kenya.
Ho odara lisebelisoa tse ling kapa lisebelisoa tse ling ikopanye le morekisi oa hau kapa u romelle molaetsa ENTTEC ka kotloloho.
Ho hloekisa
Ho bokellana ha lerōle le litšila ho ka fokotsa bokhoni ba sesebelisoa sa ho qhala mocheso o bakang tšenyo. Ho bohlokoa hore sesebelisoa se hloekisoe ho latela kemiso e loketseng tikoloho eo se kentsoeng ho eona ho netefatsa hore sehlahisoa se phela nako e telele.
Mananeo a ho hloekisa a tla fapana haholo ho latela tikoloho ea ts'ebetso. Ka kakaretso, ha tikoloho e fetelletse haholoanyane, nako e khuts'oane lipakeng tsa ho hloekisa.
- Pele o hloekisa, theola sistimi ea hau mme o netefatse hore ho na le mokhoa oa ho emisa sistimi ho ba matla ho fihlela tlhoekiso e felile.
- Se ke oa sebelisa lihlahisoa tse hloekisang tse senyang, tse senyang, kapa tse thehiloeng ho solvent ho sesebelisoa.
- Se ke oa fafatsa sesebelisoa kapa lisebelisoa. Sesebelisoa ke sehlahisoa sa IP20.
Ho hloekisa sesebelisoa sa ENTTEC, sebelisa moea o hatelitsoeng ka khatello e tlase ho tlosa lerōle, litšila le likaroloana tse hlephileng. Haeba ho hlokahala, hlakola sesebelisoa ka papatsoamp lesela la microfiber.
Khetho ea lintlha tsa tikoloho tse ka eketsang tlhoko ea tlhoekiso khafetsa li kenyelletsa:
- Tšebeliso ea stage moholi, mosi kapa lisebelisoa tsa sepakapaka.
- Maemo a phahameng a phallo ea moea (ke hore, haufi le maqhubu a moea).
- Maemo a phahameng a tšilafalo kapa mosi oa sakerete.
- Lerōle le tsamaisoang ke moea (ho tloha mosebetsing oa mohaho, tikoloho ea tlhaho kapa liphello tsa pyrotechnic).
Haeba e 'ngoe ea lintlha tsena e le teng, hlahloba likarolo tsohle tsa tsamaiso hang ka mor'a ho kenya ho bona hore na ho hloekisa hoa hlokahala, ebe u hlahloba hape ka linako tse ling khafetsa. Ts'ebetso ena e tla u lumella ho fumana kemiso e tšepahalang ea ho hloekisa bakeng sa ts'ebetso ea hau.
Litaba tsa Sephutheloana
- OCTA
- 2* lihokelo tsa WAGO
- 1 * Sekotwana sa ho kenya din le dikurufu
- 1 * Bala Me Card e nang le ELM Promo Code (8 Universes)
Ntlafatso ea ntlafatso
- OCTO MK1 (SKU: 71520) ho qetela SN: 2318130, Ka kopo kenya firmware ho fihlela V1.6.
- OCTO MK2 (SKU: 71521) SN: 2318131 ho 2350677, ka kopo kenya firmware ho fihla ho V3.0. Firmware ea MK1 ha e tsamaisane le OCTO MK2.
- The Read Me Card e nang le khoutu ea Phatlalatso ea ELM e kenngoa ts'ebetsong ka mor'a OCTO MK2 (SKU: 71521) SN: 2350677 (August 2022).
Ho Odara Boitsebiso
Bakeng sa tšehetso e eketsehileng le ho sheba mefuta e fapaneng ea lihlahisoa tsa ENTTEC etela ENTTEC websebaka.
| Ntho | SKU |
| OCTO MK2 | 71521 |
Litokomane / Lisebelisoa
 |
ENTTEC OCTO MK2 LED Pixel Controller [pdf] Bukana ea Mosebelisi OCTO MK2 LED Pixel Controller, OCTO MK2, LED Pixel Controller, Pixel Controller, Controller |
 |
ENTTEC OCTO MK2 LED Pixel Controller [pdf] Bukana ea Mosebelisi OCTO MK2 LED Pixel Controller, OCTO MK2, LED Pixel Controller, Pixel Controller, Controller |
