DOREMiDi MTC-10 Midi Time Code And Smpte Ltc Time Code Conversion Device Litaelo tsa sesebelisoa

Selelekela

Lebokose la MIDI ho LTC (MTC-10) ke khoutu ea nako ea MIDI le SMPTE LTC sesebelisoa sa ho fetola khoutu ea nako e entsoeng ke DOREMiDi, e sebelisetsoang ho hokahanya nako ea molumo le mabone a MIDI. Sehlahisoa sena se na le sebopeho se tloaelehileng sa USB MIDI, MIDI DIN interface le LTC interface, e ka sebelisoang bakeng sa ho lumellana ha khoutu ea nako pakeng tsa lik'homphieutha, lisebelisoa tsa MIDI le lisebelisoa tsa LTC.

Ponahalo

1. LTC IN: Khokahano e tloaelehileng ea 3Pin XLR, ka thapo ea 3Pin XLR, hokela sesebelisoa le tlhahiso ea LTC.
2. LTC OUT: Khokahano e tloaelehileng ea 3Pin XLR, ka thapo ea 3Pin XLR, hokela sesebelisoa ka ho kenya LTC.
3. USB: Khokahano ea USB-B, e nang le ts'ebetso ea USB MIDI, e hoketsoeng komporong, kapa e hokahaneng le phepelo ea motlakase ea kantle ea 5VDC.
4. MIDI OUT: E tloaelehileng MIDI DIN segokanyimmediamentsi sa sebolokigolo ea lipini tse hlano, tlhahiso ea khoutu ea nako ea MIDI.
5. MIDI IN: Boema-kepe bo tloaelehileng ba MIDI DIN ba li-pin tse hlano, kenya khoutu ea nako ea MIDI.
6. FPS: E sebelisoa ho bontša palo ea hajoale ea liforeimi tse fetisoang motsotsoana. Ho na le lifomate tse 'ne tsa foreimi: 24, 25, 30DF, le 30.
7. MOHLOLI: E sebedisetsoa ho bontša mohloli oa ho kenya khoutu ea nako ea hajoale. Mohloli o kenang oa khoutu ea nako e ka ba USB, MIDI kapa LTC.
8. SW: Key switch, e sebelisetsoang ho fetola lipakeng tsa mehloli e fapaneng ea ho kenya khoutu ea nako.

Lihlahisoa tsa lihlahisoa

Lebitso	Tlhaloso
Mohlala	MTC-10
Boholo (L x W x H)	88*70*38mm
Boima ba 'mele	160g
Tšebelisano ea LTC	Ts'ehetso ea 24, 25, 30DF, sebopeho sa nako ea 30
Tšebelisano ea USB	E lumellana le Windows, Mac, iOS, Android le lits'ebetso tse ling, plug le play, ha ho hlokahale hore ho kenngoe mokhanni
Tšebelisano ea MIDI	E lumellana le lisebelisoa tsohle tsa MIDI tse nang le sebopeho se tloaelehileng sa MIDI
Tshebetso Voltage	5VDC, fana ka matla ho sehlahisoa ka sebopeho sa USB-B
Ho sebetsa hona joale	40 ~ 80mA
Ntlafatso ea firmware	Tšehetsa ntlafatso ea firmware

Mehato ea tšebeliso

1. Phepelo ea motlakase: Matla MTC-10 ka sebopeho sa USB-B se nang le voltage ea 5VDC, 'me pontšo ea matla e tla khantša ka mor'a hore motlakase o fanoe.
2. Hokela komporong: Hokela khomphuteng ka sebopeho sa USB-B.
3. Hokela sesebelisoa sa MIDI: Sebelisa thapo e tloaelehileng ea 5-Pin MIDI ho hokela MIDI OUT ea MTC-10 ho IN ea sesebelisoa sa MIDI, le MIDI IN ea MTC-10 ho OUT ea sesebelisoa sa MIDI.
4. Hokela lisebelisoa tsa LTC: Sebelisa thapo e tloaelehileng ea 3-Pin XLR ho hokela LTC OUT ho MTC-10 ho LTC IN ea lisebelisoa tsa LTC, le LTC IN ea MTC-10 ho LTC OUT ea lisebelisoa tsa LTC.
5. Lokisa mohloli oa ho kenya khoutu ea nako: Ka ho tobetsa konopo ea SW, fetola lipakeng tsa mehloli e fapaneng ea ho kenya khoutu ea nako (USB, MIDI kapa LTC). Ka mor'a ho fumana mohloli oa ho kenya, mefuta e meng e 'meli ea li-interfaces e tla hlahisa khoutu ea nako. Ka hona, ho na le mekhoa e 3:
   • Mohloli oa ho kenya USB: khoutu ea nako e kentsoe ho tsoa ho USB, MIDI OUT e tla hlahisa khoutu ea nako ea MIDI, LTC OUT e tla hlahisa khoutu ea nako ea LTC:
   • Mohloli oa ho kenya MIDI: khoutu ea nako e kentsoe ho tsoa ho MIDI IN, USB e tla hlahisa khoutu ea nako ea MIDI, LTC OUT e tla hlahisa khoutu ea nako ea LTC:
   • Mohloli oa tlhahiso ea LTC: khoutu ea nako e kentsoe ho tsoa ho LTC IN, USB le MIDI OUT e tla hlahisa khoutu ea nako ea MIDI:

Tlhokomeliso: Ka mor'a hore mohloli oa ho kenya o khethoe, sebopeho sa tlhahiso ea mohloli o lumellanang le sona se ke ke sa ba le tlhahiso ea khoutu ea nako. Bakeng sa mohlalaample, ha LTC IN e khethoa e le mohloli oa ho kenya, LTC OUT e ke ke ea ntša khoutu ea nako.)

Mehato ya tlhokomelo

1. Sehlahisoa sena se na le boto ea potoloho.
2. Pula kapa ho qoelisoa ka metsing ho ka etsa hore sehlahisoa se se ke sa sebetsa hantle.
3. Se ke oa futhumatsa, oa hatella kapa oa senya likarolo tsa ka hare.
4. Basebetsi bao e seng litsebi tsa tlhokomelo ha baa lumelloa ho qhaqholla sehlahisoa.
5. Karolo ea ho sebetsatage ea sehlahisoa ke 5VDC, ho sebelisa voltage theolela kapa e feteng phallo enatage ka etsa hore sehlahisoa se hlolehe ho sebetsa kapa se senyehe.

Netefatsa hore na komporo e na le mokhanni oa MIDI. Ka kakaretso, komporo e tla le mokhanni oa MIDI. Haeba u fumana hore komporo ha e na mokhanni oa MIDI, o hloka ho kenya mokhanni oa MIDI. Mokhoa oa ho kenya: https://windowsreport.com/install-midi-drivers-pc / Haeba bothata bo sa rarolloe, ka kopo ikopanye le litšebeletso tsa bareki

Tšehetso

Moetsi: Shenzhen Huashi Technology Co., Ltd Aterese: Room 9A, 9th Floor, Kechuang Building, Quanzhi Science and Technology Innovation Park, Shajing Street, Baoan District, Shenzhen, Guangdong Province Email Service Customer: info@doremidi.cn

Litokomane / Lisebelisoa

DOREMiDi MTC-10 Midi Time Code And Smpte Ltc Time Code Conversion Device [pdf] Litaelo MTC-10, Midi Time Code And Smpte Ltc Time Code Conversion Device, MTC-10 Midi Time Code And Smpte Ltc Time Code Conversion Device, Time Code And Smpte Ltc Time Code Conversion Device, Smpte Ltc Time Code Conversion Device, Time Code Conversion Device , Sesebelisoa sa ho Fetolela, Sesebelisoa

Litšupiso

• Bukana ea Mosebelisi