DOREMiDi MTC-10 Midi Time Code na Smpte Ltc Usoro Ntụgharị Ntuziaka ngwaọrụ DOREMiDi MTC-10 Midi Time Code na Smpte Ltc Usoro Ntụgharị Ngwaọrụ

ọdịnaya zoo
1 Okwu mmalite
2 Ọdịdị
3 Ngwa ngwaahịa
4 Nzọụkwụ maka ojiji
5 Mkpachapụ anya
6 Nkwado
7 Akwụkwọ / akụrụngwa
7.1 Ntụaka
8 Ozi ndị metụtara

Okwu mmalite

Igbe MIDI ka LTC (MTC-10) bụ koodu oge MIDI yana SMPTE ngwaọrụ ntụgharị koodu oge LTC nke DOREMiDi mere, nke a na-eji mekọrịta oge ụda na ọkụ MIDI. Ngwaahịa a nwere ọkọlọtọ USB MIDI interface, MIDI DIN interface na interface LTC, nke enwere ike iji maka mmekọrịta koodu oge n'etiti kọmputa, ngwaọrụ MIDI na ngwaọrụ LTC.

Ọdịdị

Ọdịdị nke ngwaọrụ
  1. LTC na: Ọkọlọtọ 3Pin XLR interface, site na eriri 3Pin XLR, jikọọ ngwaọrụ na mmepụta LTC.
  2. LTC pụta: Ọkọlọtọ 3Pin XLR interface, site na eriri 3Pin XLR, jikọọ ngwaọrụ na ntinye LTC.
  3. USB: USB-B interface, nwere ọrụ MIDI USB, jikọọ na kọmputa, ma ọ bụ jikọọ na ọkụ 5VDC dị n'èzí.
  4. MIDI pụta: Ọkọlọtọ MIDI DIN interface mmepụta pin-ise, koodu oge MIDI mmepụta.
  5. MIDI N'ime: Ọkọlọtọ MIDI DIN ọdụ ụgbọ ntinye pin-ise, ntinye koodu oge MIDI.
  6. FPS: A na-eji egosi ọnụọgụ fremu dị ugbu a na-ebufe kwa sekọnd. Enwere usoro etiti anọ: 24, 25, 30DF, na 30.
  7. Isi mmalite: A na-eji egosi isi mmalite nke koodu oge dị ugbu a. Isi mmalite koodu oge nwere ike ịbụ USB, MIDI ma ọ bụ LTC.
  8. SW: Mgbanwe igodo, nke a na-eji gbanwee n'etiti isi mmalite ntinye koodu oge dị iche iche.

Ngwa ngwaahịa

Aha Nkọwa
Nlereanya MTC-10
Nha (L x W x H) 88*70*38mm
Ibu 160g
Ndakọrịta LTC Nkwado 24, 25, 30DF, usoro oge 30
 USB ndakọrịta Dakọtara na Windows, Mac, iOS, Android na sistemu ndị ọzọ, plọg na egwuregwu, enweghị nrụnye ọkwọ ụgbọ ala achọrọ
Ndakọrịta MIDI Dakọtara na ngwaọrụ MIDI niile nwere interface ọkọlọtọ MIDI
Nrụ ọrụ Voltage 5VDC, na-enye ike na ngwaahịa site na USB-B interface
Na-arụ ọrụ ugbu a 40-80mA
Nkwalite ngwa ngwa Kwado nkwalite ngwa ngwa

Nzọụkwụ maka ojiji

  1. Ịnye ọkụ: Ike MTC-10 site na USB-B interface nwere voltage nke 5VDC, na egosi ike ga-enwu mgbe enyechara ike.
  2. Jikọọ na kọmputa: Jikọọ na kọmputa site na USB-B interface.
  3. Jikọọ ngwaọrụ MIDI: Jiri eriri MIDI 5-Pin ọkọlọtọ jikọọ MIDI OUT nke MTC-10 na IN nke ngwaọrụ MIDI, yana MIDI IN nke MTC-10 na mpụga ngwaọrụ MIDI.
  4. Jikọọ ngwaọrụ LTC: Jiri eriri 3-Pin XLR ọkọlọtọ jikọọ LTC OUT nke MTC-10 na LTC IN nke ngwaọrụ LTC, yana LTC IN nke MTC-10 gaa na LTC OUT nke ngwaọrụ LTC.
  5. Hazie isi iyi ntinye koodu oge: Site na ịpị bọtịnụ SW, gbanwee n'etiti isi mmalite ntinye koodu oge dị iche iche (USB, MIDI ma ọ bụ LTC). Mgbe ịchọpụtachara isi iyi ntinye, ụdị ihu abụọ ọzọ ga-ewepụta koodu oge. Ya mere, e nwere ụzọ 3:
    • Isi iyi ntinye USB: koodu oge bụ ntinye site na USB, MIDI OUT ga-ewepụta koodu oge MIDI, LTC OUT ga-ewepụta koodu oge LTC: Nzọụkwụ maka ojiji
    • Isi mmalite ntinye MIDI: koodu oge bụ ntinye sitere na MIDI IN, USB ga-ewepụta koodu oge MIDI, LTC OUT ga-ewepụta koodu oge LTC: Nzọụkwụ maka ojiji
    • Isi mmalite ntinye LTC: koodu oge bụ ntinye sitere na LTC IN, USB na MIDI OUT ga-ewepụta koodu oge MIDI: Nzọụkwụ maka ojiji
Cheta na: Mgbe ahọpụtara isi iyi ntinye, ihe nrụpụta nke isi iyi kwekọrọ agaghị enwe mmepụta koodu oge. Maka examplee, mgbe ahọpụtara LTC IN dị ka isi mmalite ntinye, LTC OUT agaghị ewepụta koodu oge.)

Mkpachapụ anya

  1. Ngwaahịa a nwere bọọdụ sekit.
  2. Mmiri ozuzo ma ọ bụ imikpu n'ime mmiri nwere ike ime ka ngwaahịa ahụ ghara ịrụ ọrụ nke ọma.
  3. Ewepụla ọkụ, pịa, ma ọ bụ mebie ihe ndị dị n'ime.
  4. A naghị ekwe ka ndị ọrụ na-ahụ maka nlekọta na-abụghị ndị ọkachamara ịkwasa ngwaahịa ahụ.
  5. Vol na-arụ ọrụtage nke ngwaahịa bụ 5VDC, na-eji voltage ala ma ọ bụ karịa nke a voltage nwere ike ime ka ngwaahịa ahụ ghara ịrụ ọrụ ma ọ bụ mebie ya.
Ajụjụ: Enweghị ike ịgbanwe koodu oge LTC ka ọ bụrụ koodu oge MIDI.

Azịza: Biko hụ na usoro nke koodu oge LTC bụ otu n'ime 24, 25, 30DF, na 30 Frames; ọ bụrụ na ọ bụ nke ụdị ndị ọzọ, njehie koodu oge ma ọ bụ etiti ọnwụ nwere ike ime.

Ajụjụ: MTC-10 nwere ike ịmepụta koodu oge?

Azịza: Mba, a na-eji ngwaahịa a naanị maka ntụgharị koodu oge yana anaghị akwado ọgbọ koodu oge ugbu a. Ọ bụrụ na enwere ọrụ ọgbọ koodu oge n'ọdịnihu, a ga-agwa ya site na onye ọrụ gọọmentị websaịtị. Biko soro ọkwa gọọmentị

Ajụjụ: Enweghị ike ijikọ USB na kọmputa

Azịza: Mgbe akwadochara njikọ ahụ, ma ọkụ egosi na-enwu

Gosi ma kọmpụta ahụ nwere ọkwọ ụgbọala MIDI. N'ikwu okwu n'ozuzu, kọmputa na-eji ọkwọ ụgbọala MIDI. Ọ bụrụ na ị chọpụta na kọmpụta enweghị onye ọkwọ ụgbọ ala MIDI, ịkwesịrị ịwụnye ọkwọ ụgbọ ala MIDI. Usoro ntinye: https://windowsreport.com/install-midi-drivers-pc / Ọ bụrụ na edozighi nsogbu a, biko kpọtụrụ ndị ahịa

Nkwado

Onye nrụpụta: Akụkọ ihe mere eme nke Shenzhen Huashi Technology Co., Ltd adreesị: Ime ụlọ 9A, 9th Floor, Kechuang Building, Quanzhi Science and Technology Innovation Park, Shajing Street, Baoan District, Shenzhen, Guangdong Province Email ọrụ ndị ahịa: info@doremidi.cn

Akwụkwọ / akụrụngwa

DOREMiDi MTC-10 Midi Time Code na Smpte Ltc Usoro Ntụgharị Ngwaọrụ [pdf] Ntuziaka
MTC-10, Midi Time Code na Smpte Ltc Time Code Conversion Device, MTC-10 Midi Time Code and Smpte Ltc Time Code Change Device, Time Code and Smpte Ltc Time Code Time Device, Smpte Ltc Time Code Conversion Device, Time Code Transition Device , Ngwaọrụ ngbanwe, Ngwaọrụ

Ntụaka

Ozi ndị metụtara

Hapụ ikwu

Agaghị ebipụta adreesị ozi-e gị. Akara mpaghara achọrọ akara *