DIGILENT PmodUSBUART USB to UART Serial Converter Module Owner's Manual
Fetileview
Digi e alima PmodUSBUART ke mojule oa converter oa USB ho ea ho UART Serial o khonang ho fetisetsa litefiso ho ea holimo ho 3 Mbaud.
PmodUSBUART.
Likarolo li kenyelletsa:
- USB ho sebopeho sa serial sa UART
- Sehokelo sa Micro USB
- Khetho ea ho matlafatsa boto ea sistimi ka chip ea FTDI
- PCB e nyane bakeng sa meralo e tenyetsehang 1.0“ × 0.8” (2.5 cm × 2.0 cm)
- Sehokelo sa 6-pin Pmod se nang le sebopeho sa UART
- E latela Digi e alimile Tlhaloso ea Pmod Interface Mofuta oa 4
Tlhaloso ea Ts'ebetso
PmodUSBUART e fana ka phetoho ea USB ho UART ka FTDI FT232RQ. Basebelisi ba ka romella data ka tsela efe kapa efe ho Pmod mme ba amohela data e fetotsoeng ka sebopeho se nepahetseng.
Ho kopana le Pmod
PmodUSBUART e buisana le boto ea baeti ka ho UART protocol. Basebelisi ba ka fana ka datha ka boema-kepe ba USB kapa ba na le chip ea FTDI e ka har'a board e fetolelang data ea setaele sa USB ho protocol ea UART. Ka mokhoa o ts'oanang, data e fanoeng ka UART e fetoleloa ka bo eona ke chip ea FTDI ho sebopeho sa USB. Mabelo a fapaneng, parity, le litlhophiso tse ling li ka hlophisoa ka emulator ea terminal khomphuteng ea hau.
Lethathamo la 1. Tafole ea tlhaloso ea pinout.
| Sehokelo J2 – UART Communications | ||
| Pin | Letshwao | Tlhaloso |
| 1 | RTS | E Itokiselitse ho Romeloa |
| 2 | RXD | Amohela |
| 3 | TXD | Fetisetsa |
| 4 | CTS | Hlakileng ho Romela |
| 5 | GND | Fatše |
| 6 | SYS3V3 | Phepelo ea Matla (3.3V) |
| Jumper JP1 | ||
| 1 | LCL3V3 | Boto ea sistimi e khomaretsoeng e tsamaisoa ka boikemelo ho tsoa ho PmodUSBUART |
| 1 | SYS3V3 | Boto ea sistimi e khomaretsoeng e tsamaisoa ka har'a board ea FTDI chip |
Matla leha e le afe a ka ntle a sebelisoang ho Pmod a tlameha ho ba ka hare ho 2.5V le 5.5V; leha ho le joalo, ho khothaletsoa hore Pmod e sebetse ho 3.3V.
SYS3V3 Khetha (Hlooho JP1)
Boto e khomaretsoeng ho PmodUSBUART e ka ba le seporo sa eona sa 3.3V se tsamaisoang ke hlooho ea JP1. Haeba jumper JP1 e behiloe ho SYS, joale phini ea SYS3V3 e tsamaisoa ke VCC e hlahisoang ke chip ea FTDI. Haeba boto e khomaretsoeng ho PmodUSBUART e tsamaisoa ka boeona, jumper e lokela ho behoa ho LCL.
Li-LED
Ho na le matšoao a mabeli a LED ho PmodUSBUART. LD1 e bontša phetiso ea data ho tloha ho sehokelo sa micro-USB (J1) ho ea ho sehokelo sa UART (J2). LD2 e bontša phetiso ea data ho tloha ho sehokelo sa UART (J2) ho ea ho sehokelo sa micro-USB (J1).
Litekanyo tsa 'Mele
Lithakhisa tsa hlooho ea phini li arohane ka 100 mil. PCB e bolelele ba lisenthimithara tse 1.0 ka mahlakoreng a bapileng le lithakhisa tsa hlooho ea phini le bolelele ba lisenthimithara tse 0.8 mahlakoreng a pota-potileng hlooho ea phini.
Copyright Digilent, Inc. Litokelo tsohle li sirelelitsoe.
Mabitso a mang a lihlahisoa le a khampani a boletsoeng e kanna ea ba matšoao a beng ba ona.
E jarollotsoe ho tsoa Arrow.com.
1300 Henley Court
Pullman, WA 99163
509.334.6306
www.digilentinc.com
Litokomane / Lisebelisoa
 |
DIGILENT PmodUSBUART USB ho UART Serial Converter Module [pdf] Buka ea Mong'a PmodUSBUART USB to UART Serial Converter Module, PmodUSBUART, USB to UART Serial Converter Module, Serial Converter Module, Converter Module, Module |
